- 18 Mar, 2021 8 commits
-
-
Pierre-Louis Bossart authored
Cppcheck complains a lot about possible null pointer dereferences but it's again a case of useless initializations to NULL. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210312182246.5153-9-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/da7219-aad.c:118:22: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] int report = 0, ret = 0; ^ Signed-off-by:Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20210312182246.5153-8-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/cx2072x.c:1436:10: style:inconclusive: Found duplicate branches for 'if' and 'else'. [duplicateBranch] } else if (type & 0x4) { ^ sound/soc/codecs/cx2072x.c:1439:5: note: Found duplicate branches for 'if' and 'else'. } else { ^ sound/soc/codecs/cx2072x.c:1436:10: note: Found duplicate branches for 'if' and 'else'. } else if (type & 0x4) { ^ The last two branches do the same thing and can be collapsed together. Signed-off-by:Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210312182246.5153-7-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Cppcheck warning: sound/soc/codecs/cx2072x.c:830:26: style: Variable 'reg1.r.rx_data_one_line' is reassigned a value before the old one has been used. [redundantAssignment] reg1.r.rx_data_one_line = 1; ^ sound/soc/codecs/cx2072x.c:782:26: note: reg1.r.rx_data_one_line is assigned reg1.r.rx_data_one_line = 1; ^ sound/soc/codecs/cx2072x.c:830:26: note: reg1.r.rx_data_one_line is overwritten reg1.r.rx_data_one_line = 1; ^ sound/soc/codecs/cx2072x.c:831:26: style: Variable 'reg1.r.tx_data_one_line' is reassigned a value before the old one has been used. [redundantAssignment] reg1.r.tx_data_one_line = 1; ^ sound/soc/codecs/cx2072x.c:783:26: note: reg1.r.tx_data_one_line is assigned reg1.r.tx_data_one_line = 1; ^ sound/soc/codecs/cx2072x.c:831:26: note: reg1.r.tx_data_one_line is overwritten reg1.r.tx_data_one_line = 1; ^ Likely copy/paste. Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck complains of a possible issue: sound/soc/codecs/cros_ec_codec.c:98:10: warning: Possible null pointer dereference: in [nullPointer] memcpy(in, msg->data, insize); ^ sound/soc/codecs/cros_ec_codec.c:162:34: note: Calling function 'send_ec_host_command', 5th argument 'NULL' value is 0 (uint8_t *)&p, sizeof(p), NULL, 0); ^ sound/soc/codecs/cros_ec_codec.c:98:10: note: Null pointer dereference memcpy(in, msg->data, insize); ^ In practice the access to the pointer is protected by another argument, but this is likely to fool other static analysis tools. Add a test to avoid doing the memcpy if the pointer is NULL or the size is zero. Signed-off-by:Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210312182246.5153-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Cppcheck warning: sound/soc/codecs/adau1977.c:242:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/codecs/adau1977.c:239:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/codecs/adau1977.c:242:9: note: Returning identical expression 'ret' return ret; ^ Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck warning: sound/soc/codecs/ad1836.c:311:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/codecs/ad1836.c:308:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/codecs/ad1836.c:311:9: note: Returning identical expression 'ret' return ret; ^ Likely copy/paste between adc and dac cases. Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck warnings: sound/soc/codecs/ab8500-codec.c:117:20: style: struct member 'ab8500_codec_drvdata_dbg::vaud' is never used. [unusedStructMember] struct regulator *vaud; ^ sound/soc/codecs/ab8500-codec.c:118:20: style: struct member 'ab8500_codec_drvdata_dbg::vamic1' is never used. [unusedStructMember] struct regulator *vamic1; ^ sound/soc/codecs/ab8500-codec.c:119:20: style: struct member 'ab8500_codec_drvdata_dbg::vamic2' is never used. [unusedStructMember] struct regulator *vamic2; ^ sound/soc/codecs/ab8500-codec.c:120:20: style: struct member 'ab8500_codec_drvdata_dbg::vdmic' is never used. [unusedStructMember] struct regulator *vdmic; ^ The structure is never used, remove. Signed-off-by:
-
- 17 Mar, 2021 1 commit
-
-
Bhaskar Chowdhury authored
s/functonality/functionality/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210317082042.3670745-1-unixbhaskar@gmail.comSigned-off-by:
-
- 16 Mar, 2021 8 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: debug: cleanups" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: cleanups of allocation and error handling Guennadi Liakhovetski (3): ASoC: SOF: fix debugfs initialisation error handling ASoC: SOF: only allocate debugfs cache buffers for IPC flood entries ASoC: SOF: remove superfluous NULL check in debugfs read sound/soc/sof/core.c | 5 +++-- sound/soc/sof/debug.c | 21 +++++++++++---------- 2 files changed, 14 insertions(+), 12 deletions(-) -- 2.25.1
-
Yang Li authored
./sound/soc/fsl/imx-hdmi.c:226:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1614848881-29637-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Mikhail Durnev authored
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in some cases, e.g. when the backend output rate is set to some value higher than 48000 Hz and the input rate is 8000 Hz. So passing the value returned by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in "FSO/FSI ratio error" and playing no audio at all while the userland is not properly notified about the issue. If SRC is unable to convert the requested sample rate to the sample rate the backend is using, then the requested sample rate should be adjusted in rsnd_hw_params. The userland will be notified about that change in the returned hw_params structure. Signed-off-by:
Mikhail Durnev <mikhail_durnev@mentor.com> Link: https://lore.kernel.org/r/1615870055-13954-1-git-send-email-mikhail_durnev@mentor.comSigned-off-by:
-
Fabio Estevam authored
i.MX has been converted to a devicetree-only platform and asoc-mx27vis.h is no longer used. Get rid of this unused file. Signed-off-by:
-
Viorel Suman authored
Remove redundant code and use snd_ctl_boolean_mono_info instead. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615887736-31217-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Guennadi Liakhovetski authored
When reading from IPC flood debugfs entries no need to check whether .cache_buf is NULL - it's impossible since otherwise the initialisation would have failed. This also fixes a klocwork reported issue: passed to function and may be dereferenced there by passing argument 2 to function 'memcpy' at line 510. sound/soc/sof/debug.c:510 | sof_dfsentry_read() Reported-by:
Keqiao Zhang <keqiao.zhang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Xiuli Pan <xiulipan@outlook.com> Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
snd_sof_debugfs_buf_item() is an exported function and is called from different locations to initialise different debugfs entries. However .cache_buf is only needed for IPC flood entries. Limit allocations respectively. Reviewed-by:
-
Guennadi Liakhovetski authored
If debugfs initialisation fails partially in sof_probe_continue() some debugfs files and the root directory might have been created successfully. They have to be cleaned up if some of them failed too. Reviewed-by:
-
- 12 Mar, 2021 22 commits
-
-
Mark Brown authored
Hi All, Here is a resent of the remaining patches from my "[PATCH 0/5] AsoC: rt5640/rt5651: Volume control fixes" series, with the controversial "[PATCH 3/5] ASoC: rt5640: Add emulated 'DAC1 Playback Switch' control" patch dropped, and these remaining 2 patches rebased to still apply with that patch dropped. Regards, Hans Hans de Goede (2): ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' ASoC: Intel: bytcr_rt5640: Add used AIF to the components string sound/soc/codecs/rt5640.c | 6 +++--- sound/soc/intel/boards/bytcr_rt5640.c | 11 ++++++++--- 2 files changed, 11 insertions(+), 6 deletions(-) -- 2.30.1 -
Mark Brown authored
Merge series "ASoC: samsung: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: v4: corrected Fixes tag Added added Krzysztof Kozlowski's r-v-b tag reverted patch2 to v2 since this is the agreement. v3: Added Sylwester tag Rebased and squashed fix with initial patch which was merged at some point but can't be found in broonie/for-next (not sure what happened?) Corrected patch subjects to tm2_wm5110 Reverted second patch to initial v1, after agreement between Krzysztof and Sylwester v2: added Krzysztof Kozlowski's tags added fix for first patch already merged as suggested by Krzysztof Kozlowski moved variable to lower scope in patch6 Pierre-Louis Bossart (2): ASoC: samsung: tm2_wm5110: check of of_parse return value ASoC: samsung: tm2_wm5110: remove shadowed variable sound/soc/samsung/tm2_wm5110.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) -- 2.25.1
-
Robin Gong authored
Request dma channel from specific dma controller instead of generic dma controller list, otherwise, may get the wrong dma controller if there are multi dma controllers such as i.MX8MP. Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Signed-off-by:
-
Hans de Goede authored
Depending on which AIF is used the UCM profile needs to setup a different path through the rt5640's "Digital Mixer Path" graph. ATM the UCM profiles solve this by just enabling paths to the outputs / from the input from both AIF1 and AIF2 and then relying on the DAPM framework to power-down the parts of the graph connected to the unused AIF. But in order to be able to use hardware-volumecontrol and to use the hardware mute controls, which are necessary for mute LED control, the UCM profiles need to know which AIF is actually being used. Add a new "aif:1" or "aif:2" part to the component string to provide info about the used AIF to userspace / to the UCM profiles. Note the size of byt_rt5640_components is not increased because the size of 32 chars already is big enough. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' and move it from rt5640_specific_snd_controls[] to rt5640_snd_controls[]. The RT5640_DAC2_DIG_VOL register controlled by this mixer-element has nothing to do with the Mono (Amplified) output which is only available on the ALC5640 chip and not on the ALC5642 chip. The RT5640_DAC2_DIG_VOL volume-control is the main volume control for audio coming from the I2S2 / AIF2 input of the chip and as such is also available on the ALC5642. This commit results in the following userspace visible changes: 1. On devices with an ACL5640 codec, the 'Mono DAC Playback Volume' control is renamed to 'DAC2 Playback Volume' allowing the alsa-lib mixer code to properly group it with the 'DAC2 Playback Switch' which is controlling the mute bits in the RT5640_DAC2_DIG_VOL register. Note the removal of the 'Mono DAC Playback Volume' is not an issue for userspace because the UCM profiles do not use it (the UCM profiles are shared betweent the 5640 and 5642 and only the 5640 had this control). 2. On devices with an ACL5642 codec, there now will be a new 'DAC2 Playback Volume', grouped with the 'DAC2 Playback Switch' Having a complete 'DAC2 Playback Volume' / 'DAC2 Playback Switch' pair on both variants will allow enabling hardware-volume control by setting the UCM PlaybackMasterElem to "DAC2" on devices where the I2S2/AIF2 interface of the codec is used. Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/samsung/tm2_wm5110.c:552:26: style: Local variable 'args' shadows outer variable [shadowVariable] struct of_phandle_args args; ^ sound/soc/samsung/tm2_wm5110.c:504:25: note: Shadowed declaration struct of_phandle_args args; ^ sound/soc/samsung/tm2_wm5110.c:552:26: note: Shadow variable struct of_phandle_args args; ^ Move the top-level variable to the lower scope where it's needed. Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210312180231.2741-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment] ret = devm_snd_soc_register_component(dev, &tm2_component, ^ sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller", ^ sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten ret = devm_snd_soc_register_component(dev, &tm2_component, ^ The args is a stack variable, so it could have junk (uninitialized) therefore args.np could have a non-NULL and random value even though property was missing. Later could trigger invalid pointer dereference. There's no need to check for args.np because args.np won't be initialized on errors. Fixes: 8d1513ce ("ASoC: samsung: Add support for HDMI audio on TM2 board") Cc: <stable@vger.kernel.org> Suggested-by:Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Jack Yu authored
Add acpi device id for rt1015p. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Reviewed-by:
-
Hans de Goede authored
The Asus T100TAF uses the same jack-detect settings as the T100TA, this has been confirmed on actual hardware. Add these settings to the T100TAF quirks to enable jack-detect support on the T100TAF. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: soc-pcm: cleanup each functions" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v2 of soc-pcm cleanup patches. These has no relationship to each other. My 1 concern is [3/8] patch. I think it is no problem, but I'm not 100% sure why current code was such code. Pierre-Louis / Liam might about something. v1 -> v2 - soc_cpu/codec_dai_name() is now inline function - rename soc_pcm_care_symmetry() to soc_pcm_update_symmetry() v2 -> v3 - log fix at [6/8] - Thus, it will be minus users at (2). + Thus, users will be a negative number at (2) Link: https://lore.kernel.org/r/87tupuqqc8.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87tupqpg9x.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (8): ASoC: soc-pcm: check DAI activity under soc_pcm_apply_symmetry() ASoC: soc-pcm: add soc_cpu/codec_dai_name() macro ASoC: soc-pcm: direct copy at snd_soc_set_runtime_hwparams() ASoC: soc-pcm: add soc_pcm_update_symmetry() ASoC: soc-pcm: add soc_hw_sanity_check() ASoC: soc-pcm: fixup dpcm_be_dai_startup() user count ASoC: soc-pcm: remove unneeded !rtd->dai_link check ASoC: soc-pcm: share DPCM BE DAI stop operation include/sound/soc-dpcm.h | 8 +- sound/soc/soc-compress.c | 2 +- sound/soc/soc-pcm.c | 243 ++++++++++++++++----------------------- 3 files changed, 105 insertions(+), 148 deletions(-) -- 2.25.1
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:929:28: style: Local variable 'irq' shadows outer argument [shadowArgument] struct mtk_base_afe_irq *irq; ^ sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:914:47: note: Shadowed declaration static irqreturn_t mt8173_afe_irq_handler(int irq, void *dev_id) ^ sound/soc/mediatek/mt8173/mt8173-afe-pcm.c:929:28: note: Shadow variable struct mtk_base_afe_irq *irq; ^ Not a great idea to have two 'irq' variables in the same function... Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:406:36: style: Local variable 'memif_data' shadows outer variable [shadowVariable] const struct mtk_base_memif_data *memif_data; ^ sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:977:41: note: Shadowed declaration static const struct mtk_base_memif_data memif_data[MT2701_MEMIF_NUM] = { ^ sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:406:36: note: Shadow variable const struct mtk_base_memif_data *memif_data; ^ sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:431:36: style: Local variable 'memif_data' shadows outer variable [shadowVariable] const struct mtk_base_memif_data *memif_data; ^ sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:977:41: note: Shadowed declaration static const struct mtk_base_memif_data memif_data[MT2701_MEMIF_NUM] = { ^ sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:431:36: note: Shadow variable const struct mtk_base_memif_data *memif_data; ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warnings: sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c:102:30: style:inconclusive: Function 'mt2701_afe_enable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. [funcArgNamesDifferent] struct mt2701_i2s_path *i2s_path, ^ sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.h:21:30: note: Function 'mt2701_afe_enable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. struct mt2701_i2s_path *path, ^ sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c:102:30: note: Function 'mt2701_afe_enable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. struct mt2701_i2s_path *i2s_path, ^ sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c:128:32: style:inconclusive: Function 'mt2701_afe_disable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. [funcArgNamesDifferent] struct mt2701_i2s_path *i2s_path, ^ sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.h:24:32: note: Function 'mt2701_afe_disable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. struct mt2701_i2s_path *path, ^ sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c:128:32: note: Function 'mt2701_afe_disable_i2s' argument 2 names different: declaration 'path' definition 'i2s_path'. struct mt2701_i2s_path *i2s_path, ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/mediatek/common/mtk-btcvsd.c:783:34: style: Variable 'avail' is assigned a value that is never used. [unreadVariable] int written_size = count, avail = 0, cur_write_idx, write_size, cont; ^ Signed-off-by: -
Kuninori Morimoto authored
soc-pcm has very similar but different DPCM BE DAI stop operation at 1) dpcm_be_dai_startup() error case rollback 2) dpcm_be_dai_startup_unwind() 3) dpcm_be_dai_shutdown() The differences are 1) for rollback 2) Doesn't check by snd_soc_dpcm_be_can_update() (Is this bug ?) 3) Do soc_pcm_hw_free() if it was not !OPENed and !HW_FREEed, and call soc_pcm_close(). We can share same code by 1) hw_free is not needed. Needs last dpcm as rollback. 2) hw_free is not needed. 3) hw_free is needed. This patch adds new dpcm_be_dai_stop() and share these 3. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6rduoam.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
rtd->dai_link is setuped at soc_new_pcm_runtime(), thus "rtd->dai_link == NULL" is never happen. This patch removes unneeded !rtd->dai_link check Signed-off-by:
-
Kuninori Morimoto authored
At dpcm_be_dai_startup_unwind(), it indicates error message at (1) if this function was called with no users. But, it doesn't use "continue" here. Thus, users will be a negative number at (2) void dpcm_be_dai_startup_unwind(...) { ... for_each_dpcm_be(...) { ... (1) if (be->dpcm[stream].users == 0) dev_err(...); (2) if (--be->dpcm[stream].users != 0) continue; At dpcm_be_dai_startup(), it indicates error message if user reached to MAX USERS at (A). But, it doesn't use "continue" here. Thus, it will be over MAX USERS at (B). int dpcm_be_dai_startup(...) { ... for_each_dpcm_be(...) { ... (A) if (be->dpcm[stream].users == DPCM_MAX_BE_USERS) dev_err(...); (B) if (be->dpcm[stream].users++ != 0) continue; These are just bug. This patch fixup these. Signed-off-by: -
Kuninori Morimoto authored
Current soc_pcm_open() is checking runtime->hw parameters, but having such function is very helpful for reading code. This patch adds new soc_hw_sanity_check() and checks runtime->hw parameters there. And print its debug message there, too. Debug message print out timing is exchanged after this patch, but it is not a big deal, because it is for debug. Signed-off-by:
-
Kuninori Morimoto authored
Current soc-pcm has soc_pcm_has_symmetry() and using it as if (soc_pcm_has_symmetry(substream)) substream->runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX; We want to share same operation as same function. This patch adds soc_pcm_update_symmetry() and pack above code in one function. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_set_runtime_hwparams() is called from each driver to initialize hw parameters, but coping each parameters one-by-one. Current code is not copying all parameters, but no big effect if we do it. This patch copies all parameters by simple code. Signed-off-by:
-
Kuninori Morimoto authored
soc-pcm needs DAI name and it will be "multicpu/multicodec" if it has many DAIs. But current code is using very verbose for it. This patch uses macro and makes code simple. Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_apply_symmetry() is used like below in all cases. if (snd_soc_dai_active(dai)) { err = soc_pcm_apply_symmetry(fe_substream, dai); ... } Because of this style, the code is deep nested. This patch checks it under soc_pcm_apply_symmetry(), and makes code simple. static int soc_pcm_apply_symmetry(...) { ... => if (!snd_soc_dai_active(...)) return 0; ... } => ret = soc_pcm_apply_symmetry(); if (ret < 0) ... Signed-off-by:
-
- 11 Mar, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: mediatek: mt8183-mt6358: support machine driver for rt1015p" from Tzung-Bi Shih <tzungbi@google.com>: The series reuses mt8183-mt6358-ts3a227-max98357.c for supporting machine driver with rt1015p speaker amplifier. The 1st patch adds document for the new proposed compatible string. The 2nd patch changes the machine driver to support "RT1015P" codec. Tzung-Bi Shih (2): ASoC: dt-bindings: mt8183: add compatible string for using rt1015p ASoC: mediatek: mt8183: support machine driver with rt1015p .../sound/mt8183-mt6358-ts3a227-max98357.txt | 1 + sound/soc/mediatek/Kconfig | 1 + .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 29 +++++++++++++++++++ 3 files changed, 31 insertions(+) -- 2.31.0.rc2.261.g7f71774620-goog
-
