- 28 Jul, 2014 1 commit
-
-
Gavin Guo authored
commit bb86cf56 upstream. When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller [1022:7814], the second hotplugging will experience the USB 3.0 pen drive is recognized as high-speed device. After bisecting the kernel, I found the commit number 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing some experiments, the bug can be fixed by avoiding executing the function hub_usb3_port_disable(). Because the port status with [AMD] FCH USB XHCI Controlleris [1022:7814] is already in RxDetect (I tried printing out the port status before setting to Disabled state), it's reasonable to check the port status before really executing hub_usb3_port_disable(). Fixes: 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 Jul, 2014 39 commits
-
-
Greg Kroah-Hartman authored
-
Lan Tianyu authored
commit 75646e75 upstream. Some machines (eg. Lenovo Z480) ECs are not stable during boot up and causes battery driver fails to be loaded due to failure of getting battery information from EC sometimes. After several retries, the operation will work. This patch is to retry to get battery information 5 times if the first try fails. [ backport to 3.14.5: removed second parameter in acpi_battery_update(), introduced by the commit 9e50bc14 (ACPI / battery: Accelerate battery resume callback)] [naszar <naszar@ya.ru>: backport to 3.14.5] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581Reported-and-tested-by:
naszar <naszar@ya.ru> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Roland Dreier authored
commit c81c8a1e upstream. In __ioremap_caller() (the guts of ioremap), we loop over the range of pfns being remapped and checks each one individually with page_is_ram(). For large ioremaps, this can be very slow. For example, we have a device with a 256 GiB PCI BAR, and ioremapping this BAR can take 20+ seconds -- sometimes long enough to trigger the soft lockup detector! Internally, page_is_ram() calls walk_system_ram_range() on a single page. Instead, we can make a single call to walk_system_ram_range() from __ioremap_caller(), and do our further checks only for any RAM pages that we find. For the common case of MMIO, this saves an enormous amount of work, since the range being ioremapped doesn't intersect system RAM at all. With this change, ioremap on our 256 GiB BAR takes less than 1 second. Signed-off-by:
Roland Dreier <roland@purestorage.com> Link: http://lkml.kernel.org/r/1399054721-1331-1-git-send-email-roland@kernel.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Lennox Wu authored
commit df9e4d1c upstream. Signed-off-by:
Lennox Wu <lennox.wu@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Lennox Wu authored
commit 5fbbf8a1 upstream. The modifications include: 1. Kconfig of Score: we don't support ioremap 2. Missed headfile including 3. There are some errors in other people's commit not checked by us, we fix it now 3.1 arch/score/kernel/entry.S: wrong instructions 3.2 arch/score/kernel/process.c : just some typos Signed-off-by:
-
Lennox Wu authored
commit 1ed62ca6 upstream. Signed-off-by:
-
Jiang Liu authored
commit ae49b83d upstream. Generate mandatory global variables _sdata in file vmlinux.lds. Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Thomas Gleixner authored
commit 27e35715 upstream. When the rtmutex fast path is enabled the slow unlock function can create the following situation: spin_lock(foo->m->wait_lock); foo->m->owner = NULL; rt_mutex_lock(foo->m); <-- fast path free = atomic_dec_and_test(foo->refcnt); rt_mutex_unlock(foo->m); <-- fast path if (free) kfree(foo); spin_unlock(foo->m->wait_lock); <--- Use after free. Plug the race by changing the slow unlock to the following scheme: while (!rt_mutex_has_waiters(m)) { /* Clear the waiters bit in m->owner */ clear_rt_mutex_waiters(m); owner = rt_mutex_owner(m); spin_unlock(m->wait_lock); if (cmpxchg(m->owner, owner, 0) == owner) return; spin_lock(m->wait_lock); } So in case of a new waiter incoming while the owner tries the slow path unlock we have two situations: unlock(wait_lock); lock(wait_lock); cmpxchg(p, owner, 0) == owner mark_rt_mutex_waiters(lock); acquire(lock); Or: unlock(wait_lock); lock(wait_lock); mark_rt_mutex_waiters(lock); cmpxchg(p, owner, 0) != owner enqueue_waiter(); unlock(wait_lock); lock(wait_lock); wakeup_next waiter(); unlock(wait_lock); lock(wait_lock); acquire(lock); If the fast path is disabled, then the simple m->owner = NULL; unlock(m->wait_lock); is sufficient as all access to m->owner is serialized via m->wait_lock; Also document and clarify the wakeup_next_waiter function as suggested by Oleg Nesterov. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 3d5c9340 upstream. Even in the case when deadlock detection is not requested by the caller, we can detect deadlocks. Right now the code stops the lock chain walk and keeps the waiter enqueued, even on itself. Silly not to yell when such a scenario is detected and to keep the waiter enqueued. Return -EDEADLK unconditionally and handle it at the call sites. The futex calls return -EDEADLK. The non futex ones dequeue the waiter, throw a warning and put the task into a schedule loop. Tagged for stable as it makes the code more robust. Signed-off-by:
-
Thomas Gleixner authored
commit 82084984 upstream. When we walk the lock chain, we drop all locks after each step. So the lock chain can change under us before we reacquire the locks. That's harmless in principle as we just follow the wrong lock path. But it can lead to a false positive in the dead lock detection logic: T0 holds L0 T0 blocks on L1 held by T1 T1 blocks on L2 held by T2 T2 blocks on L3 held by T3 T4 blocks on L4 held by T4 Now we walk the chain lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> lock L0 -> deadlock detected, but it's not a deadlock at all. Brad tried to work around that in the deadlock detection logic itself, but the more I looked at it the less I liked it, because it's crystal ball magic after the fact. We actually can detect a chain change very simple: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; So if we detect that T2 is now blocked on a different lock we stop the chain walk. That's also correct in the following scenario: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T3 times out and drops L3 T2 acquires L3 and blocks on L4 now Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; We don't have to follow up the chain at that point, because T2 propagated our priority up to T4 already. [ Folded a cleanup patch from peterz ] Signed-off-by:
Brad Mouring <bmouring@ni.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140605152801.930031935@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
commit 397335f0 upstream. The current deadlock detection logic does not work reliably due to the following early exit path: /* * Drop out, when the task has no waiters. Note, * top_waiter can be NULL, when we are in the deboosting * mode! */ if (top_waiter && (!task_has_pi_waiters(task) || top_waiter != task_top_pi_waiter(task))) goto out_unlock_pi; So this not only exits when the task has no waiters, it also exits unconditionally when the current waiter is not the top priority waiter of the task. So in a nested locking scenario, it might abort the lock chain walk and therefor miss a potential deadlock. Simple fix: Continue the chain walk, when deadlock detection is enabled. We also avoid the whole enqueue, if we detect the deadlock right away (A-A). It's an optimization, but also prevents that another waiter who comes in after the detection and before the task has undone the damage observes the situation and detects the deadlock and returns -EDEADLOCK, which is wrong as the other task is not in a deadlock situation. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 8b8b3683 upstream. The per_cpu buffers are created one per possible CPU. But these do not mean that those CPUs are online, nor do they even exist. With the addition of the ring buffer polling, it assumes that the caller polls on an existing buffer. But this is not the case if the user reads trace_pipe from a CPU that does not exist, and this causes the kernel to crash. Simple fix is to check the cpu against buffer bitmask against to see if the buffer was allocated or not and return -ENODEV if it is not. More updates were done to pass the -ENODEV back up to userspace. Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.comReported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Christian König authored
commit 0986c1a5 upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6abafb78 upstream. Fixes hangs on driver load on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76998Signed-off-by:
-
Eric Sandeen authored
commit 5dd21424 upstream. The mount manpage says of the max_batch_time option, This optimization can be turned off entirely by setting max_batch_time to 0. But the code doesn't do that. So fix the code to do that. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit ae0f78de upstream. Make it clear that values printed are times, and that it is error since last fsck. Also add note about fsck version required. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Theodore Ts'o authored
commit 61c219f5 upstream. The first time that we allocate from an uninitialized inode allocation bitmap, if the block allocation bitmap is also uninitalized, we need to get write access to the block group descriptor before we start modifying the block group descriptor flags and updating the free block count, etc. Otherwise, there is the potential of a bad journal checksum (if journal checksums are enabled), and of the file system becoming inconsistent if we crash at exactly the wrong time. Signed-off-by:
-
Joe Thornber authored
commit 10f1d5d1 upstream. There's a race condition between the atomic_dec_and_test(&io->count) in dec_count() and the waking of the sync_io() thread. If the thread is spuriously woken immediately after the decrement it may exit, making the on stack io struct invalid, yet the dec_count could still be using it. Fix this race by using a completion in sync_io() and dec_count(). Reported-by:
Minfei Huang <huangminfei@ucloud.cn> Signed-off-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit affb1aff upstream. Starting with Win8, we have implemented several optimizations to improve the scalability and performance of the VMBUS transport between the Host and the Guest. Some of the non-performance critical services cannot leverage these optimization since they only read and process one message at a time. Make adjustments to the callback dispatch code to account for the way non-performance critical drivers handle reading of the channel. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Thomas Gleixner authored
commit 15ebb052 upstream. The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62 (SPEAr: Switch to common clock framework). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Colin Cross authored
commit fa2ec3ea upstream. include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Signed-off-by:
Colin Cross <ccross@android.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Jussi Kivilinna authored
commit cfe82d4f upstream. Byte-to-bit-count computation is only partly converted to big-endian and is mixing in CPU-endian values. Problem was noticed by sparce with warning: CHECK arch/x86/crypto/sha512_ssse3_glue.c arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types) arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 <noident> arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Prabhakar Lad authored
commit 5a90af67 upstream. Since commtit 8a7b1227 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
-
Joel Stanley authored
commit b50a6c58 upstream. On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e ("powerpc/perf: Power8 PMU support") Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Joel Stanley authored
commit 4d9690dd upstream. Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Signed-off-by:
-
Anton Blanchard authored
commit f5602941 upstream. We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Andy Whitcroft authored
commit 867f9d46 upstream. The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee8 Author: Zhang Rui <rui.zhang@intel.com> Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee8 (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Axel Lin authored
commit c024044d upstream. The module test script for the adm1021 driver exposes a cache problem when writing temperature limits. temp_min and temp_max are expected to be stored in milli-degrees C but are stored in degrees C. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
commit 1035a9e3 upstream. Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by:
-
Guenter Roeck authored
commit 145e74a4 upstream. Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Axel Lin authored
commit df86754b upstream. temp2_input should not be writable, fix it. Reported-by:
-
Yasuaki Ishimatsu authored
commit 5a6024f1 upstream. When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50 [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0 [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0 [<ffffffff811926f1>] new_slab+0x91/0x300 [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482 [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0 [<ffffffff810a3c78>] ? load_balance+0x218/0x890 [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10 [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200 [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0 [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60 [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8105d0ec>] do_fork+0xbc/0x360 [<ffffffff8105d3b6>] kernel_thread+0x26/0x30 [<ffffffff81086652>] kthreadd+0x2c2/0x300 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: bce90380 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") Signed-off-by:
-
Gu Zheng authored
commit 391acf97 upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Maxime Bizon authored
commit bddbceb6 upstream. Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
-
Helge Deller authored
commit eadcc720 upstream. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Michal Sojka authored
commit d8279a40 upstream. This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426aSigned-off-by:
Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bert Vermeulen authored
commit 5a7fbe7e upstream. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by:
Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andras Kovacs authored
commit b9326057 upstream. Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by:
Andras Kovacs <andras@sth.sze.hu> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bernd Wachter authored
commit 3d28bd84 upstream. Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by:
Bernd Wachter <bernd.wachter@jolla.com> Signed-off-by:
-
