- 04 Sep, 2012 40 commits
-
-
Marc Dietrich authored
commit 30b68231 "ARM: tegra: clock: add i2c fast clock entry in clock table" added a new clock for the i2c controllers, so clock requests are no longer conclusive. Fix this by specifying "div-clk" explicitly. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Masanari Iida authored
Correct spelling typo in staging/wlags49_h2 Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Devendra Naga authored
the opening brace of the if statement should be beside to it, not below to it. Signed-off-by:
Devendra Naga <develkernel412222@gmail.com> Signed-off-by:
-
Devendra Naga authored
this patch removes the return statement at the end of all void functions, since the function returning void no need to have a return at the end of the function. Signed-off-by:
-
Devendra Naga authored
the following fix is done in the wl_wds_netif_carrier_off function: wl_netdev.c:1764: ERROR: space prohibited after that open parenthesis '(' wl_netdev.c:1764: ERROR: space prohibited before that close parenthesis ')' wl_netdev.c:1768: ERROR: space prohibited after that open parenthesis '(' wl_netdev.c:1768: ERROR: space prohibited before that close parenthesis ')' wl_netdev.c:1768: ERROR: space required before the open parenthesis '(' wl_netdev.c:1769: ERROR: space prohibited after that open parenthesis '(' wl_netdev.c:1769: ERROR: space prohibited before that close parenthesis ')' wl_netdev.c:1769: ERROR: space required before the open parenthesis '(' wl_netdev.c:1770: ERROR: space prohibited after that open parenthesis '(' wl_netdev.c:1770: ERROR: space prohibited before that close parenthesis ')' wl_netdev.c:1770: ERROR: space required before the open parenthesis '(' wl_netdev.c:1771: ERROR: space prohibited after that open parenthesis '(' wl_netdev.c:1771: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: -
Devendra Naga authored
whitespaces at beginning of the line are removed and are replaced with the tabs Signed-off-by:
-
Devendra Naga authored
the return is at the end of void function, which is not needed as this function returns void. Signed-off-by:
-
Devendra Naga authored
no braces needed for single statement if block Signed-off-by:
-
Wei Yongjun authored
Remove pointless conditional before kfree_skb(). Signed-off-by:
Rupesh Gujare <rgujare@ozmodevices.com> Signed-off-by:
-
Masanari Iida authored
Fix spelling typo in staging/ozwpan Signed-off-by:
-
Jonathan Brett authored
- Add simple suspend/resume PM callbacks to disable oled display on suspend and return to previous state on resume Signed-off-by:
Jonathan Brett <jonbrett.dev@gmail.com> Signed-off-by:
-
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by:Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by:
-
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Alan Cox authored
As noted by David Binderman Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=46581Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Rob Clark authored
If rotated 90 or 270, we need to invert the dimensions used by drm core for calculating if the dimensions of an attached fb are correct. Signed-off-by:
Rob Clark <rob@ti.com> Signed-off-by:
-
Tejun Heo authored
This is an equivalent conversion and will ease scheduled removal of WQ_NON_REENTRANT. Only compile tested. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Emil Goode authored
This patch adds fail checks for kmalloc and kzalloc calls and also adds a error path that frees allocated pages by introducing a call to _drm_gem_put_pages. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iioGreg Kroah-Hartman authored
Second set of IIO rework and new drivers for the 3.7 cycle. Firstly we have the second half of a series reworking support for the various sigma delta ADCs from Analog. The first half was fixes that have already merged in the v3.6 cycle. Other than some little cleanups this mainly consists of a unifying library module that the various drivers can then use. Another new driver is using this undergoing revisions and the code reduction already seen from this is considerable. A nice piece of work. Secondly we have a good number of tidying up patches from various sources doing things like adding include guards and removing unintended header ordering requirements. Also a mass annotation of missing __devinit/exit. Peter Meerwald has been getting around with cleanup of lis3l02dq, documentation fixes, white space clenaups and a small issue with my spelling ;) Thirdly we have some improvements to our kfifo usage that have been around for a while but are now suddenly in demand from a number of users. Forth we have some clk_prepare_enable and clk_prepare_disable cleanups. Fifth is the addition of i2c dacs to the ad5446 driver Finally we have some email address updates. I'll do the MAINTAINERS one separately. So a general mixed bag but nothing terribly controversial or 'exciting'.
-
Ian Abbott authored
The `IS_ENABLED(CONFIG_COMEDI_DAS08_ISA)` and `IS_ENABLED(CONFIG_COMEDI_DAS08_PCI)` macro calls are a bit long-winded. Define a couple of macros `DO_ISA` and `DO_PCI` as abbreviations for them. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Add inline helper function `is_isa_board(board)` to check if the driver supports ISA boards and this is an ISA board, and `is_pci_board(board)` to check if the driver supports PCI boards and this is a PCI board. Signed-off-by:
-
Ian Abbott authored
Don't bother reporting the I/O base address for PCI devices as it's not very interesting. Signed-off-by:
-
Ian Abbott authored
Absorb `das08_pci_attach_common()` into `das08_attach_pci()` since that's the only place it was called from. Signed-off-by:
-
Ian Abbott authored
Remove the code that allows PCI boards to be manually attached by the `COMEDI_DEVCONFIG` ioctl (or the `comedi_config` application). Supported PCI boards will be attached automatically at probe time via `comedi_pci_auto_config()` and the `attach_pci` hook in the `struct comedi_driver`. Signed-off-by:
-
Ian Abbott authored
Stash the last value written to each AO channel in private data and support the INSN_READ instruction to read it back. Don't bother setting the SDF_READABLE subdevice flag though as the hardware isn't really readable - we're just faking it. Signed-off-by:
-
Ian Abbott authored
Initialize the AO subdevice channels to mid-range data value so they are in a known state. This allows us to support reading back the current value in a later patch. Signed-off-by:
-
Ian Abbott authored
Combine the AO write functions for 'JR' boards and other boards into a single function and factor out the data writing from the comedi instruction handling so it can be called from elsewhere in a later patch. Signed-off-by:
-
Ian Abbott authored
The `das08jr_di_rbits()`, `das08jr_do_wbits()`, `das08jr_ao_winsn()` and `das08ao_ao_winsn()` static functions are currently marked as `__maybe_unused` as they were formerly only referred to by possibly conditionally compiled out code. This is no longer the case (they are referred to by `das08_common_attach()`) so their `__maybe_unused` tags can be removed. Signed-off-by:
-
Ian Abbott authored
There is no need to check the value of `insn->n` is correct in `das08_counter_config()` as the core comedi module will have already checked it. Signed-off-by:
-
Ian Abbott authored
The I/O port base address for the counter subdevice doesn't need to be stored in the private data. It can be calculated on the fly using the offset in the static board data. Signed-off-by:
-
Ian Abbott authored
The `pci_iobase` I/O port registers from PCI BAR 1 are never accessed, so don't bother storing this base address in `struct das08_private_struct`. The `pci_iobase` member was checked for non-zero in `das08_detach()` but we can check `dev->iobase` is non-zero instead. Signed-off-by:
-
Ian Abbott authored
Remove the code that has been in `#if 0` for a long time. Signed-off-by:
-
Ian Abbott authored
Move `das08_cs_boards[]` from "das08.c" to "das08_cs.c" and make it static const. It no longer refers to anything in "das08.c" and no longer needs to be exported. Signed-off-by:
-
Ian Abbott authored
Don't bother initializing the `i8255_offset` and/or `i8254_offset` members of `struct das08_board_struct` in `das08_boards[]` and `das08_cs_boards[]` if they are zero as they are implicitly initialized to zero anyway, and zero means the corresponding subdevices are absent. Signed-off-by:
-
Ian Abbott authored
Remove the `ai`, `ao`, `di` and `do` pointers from `struct das08_board_struct`. These were initialized in `das08_boards[]` and `das08_cs_boards[]` to point to comedi instruction handler functions for the subdevice, but there are only two sets of functions depending on whether the `is_jr` member is true or false, and some of the functions will be NULL if the corresponding `ai_nbits`, `ao_nbits`, `di_nchan` and `do_nchan` members are zero. Determine which handler functions to use in das08_common_attach(). One element of `das08_boards[]` had `ao` set to NULL and `ao_nbits` set to 12. Set `ao_nbits` to 0 in this case to let das08_common_attach() know this board has no AO subdevice. Signed-off-by:
-
Ian Abbott authored
Add a bool member `is_jr` to `struct das08_board_struct` and initialize it to `true` in those elements of `das08_boards[]` corresponding to the 'JR' board models. This will be used by a following patch that removes the `ai`, `ao`, `di` and `do` members from `struct das08_board_struct`. Signed-off-by:
-
Ian Abbott authored
Add member `di_nchan` to `struct das08_board_struct` to set the number of digital input channels explicitly. Currently, the code determines the number of channels to 3 or 8 depending on what function the `di` member points to, which is not very elegant. Signed-off-by:
-
Ian Abbott authored
Remove the `pc104` value from `enum das08_bustype` and replace occurrences of it in the code and data with the `isa` value. The code treats them as equivalent anyway with expressions like `(thisboard->bustype == isa || thisboard->bustype == pc104)`. Signed-off-by:
-
Greg Kroah-Hartman authored
Pick up 2 more comedi patches from Ian that are needed for other changes in the future. Signed-off-by:
-
