- 01 Sep, 2022 9 commits
-
-
James Smart authored
During a stress offline/online test in PT2PT topology, target rediscovery can fail with a specific target vendor array. When the HBA transitions to online mode it is possible to receive an unsolicited FLOGI before processing the Link Up event. The received FLOGI will set the defer_flogi_acc_flag, which instructs the driver to wait until it transmits its own FLOGI before ACKing the received FLOGI. In this failure scenario, the link up processing clears the set defer_flogi_acc_flag before we have sent out the FLOGI. As the target has the higher WWPN and is responsible for sending the PLOGI, the target is stuck waiting for its FLOGI_ACC that the driver will never send. Remove the clear of defer_flogi_acc_flag from Link Up event processing. In this stress test case, the defer_flogi_acc_flag is cleared during the Link Down event processing anyways. Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Variable stp is assigned a value that is never read, the assignment and the variable stp are redundant and can be removed. Cleans up clang scan build warning: drivers/scsi/st.c:4253:7: warning: Although the value stored to 'stp' is used in the enclosing expression, the value is never actually read from 'stp' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805115652.2340991-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
The variable mfiStatus is assigned a value but it is never read. The assignment is redundant and can be removed. Also remove { } as the return statement does not need to be in its own code block. Cleans up clang scan build warning: drivers/scsi/megaraid/megaraid_sas_base.c:4026:7: warning: Although the value stored to 'mfiStatus' is used in the enclosing expression, the value is never actually read from 'mfiStatus' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805115042.2340400-1-colin.i.king@gmail.comSigned-off-by: -
Colin Ian King authored
The variable scb is assigned a value but it is never read. The assignment is redundant and can be removed. Also replace the != NULL check with the more usual non-null check idiom. Cleans up clang scan build warning: drivers/scsi/initio.c:1169:9: warning: Although the value stored to 'scb' is used in the enclosing expression, the value is never actually read from 'scb' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805114100.2339637-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
Variable iocnum is assigned a value that is never read, the assignment and hence the variable are redundant can be removed. Also update the comment to reflect the correct name of the variable being updated. Cleans up clang-scan warning: drivers/message/fusion/mptctl.c:641:8: warning: Although the value stored to 'iocnum' is used in the enclosing expression, the value is never actually read from 'iocnum' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805113214.2339022-1-colin.i.king@gmail.comSigned-off-by:
-
Bradley Grove authored
Disable firmware download for ATTO devices where it is not supported. Link: https://lore.kernel.org/r/20220805174609.14830-2-bgrove@attotech.comCo-developed-by:
Rob Crispo <rcrispo@attotech.com> Signed-off-by:
Bradley Grove <bgrove@attotech.com> Signed-off-by:
-
Bradley Grove authored
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM structure used by ATTO's devices. Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.comCo-developed-by:
-
Sreekanth Reddy authored
Block the I/Os on the target devices until corresponding target device's target dev objects are refreshed as part of post controller reset operation. Link: https://lore.kernel.org/r/20220804131226.16653-16-sreekanth.reddy@broadcom.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Update the host's SAS ports if there is change in port id or phys. If the port id is changed, then the driver updates it. If some phys are enabled/disabled during reset, then driver updates them in STL. Check for the responding expander devices and update the device handle if it got changed. Register the expander with STL if it got added during reset and unregister the expander device if it got removed during reset. [mkp: include fix for zeroday warning] Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.comReviewed-by:
-
- 23 Aug, 2022 25 commits
-
-
Sreekanth Reddy authored
Add support for the following SAS transport class callbacks: - get_linkerrors - get_enclosure_identifier - get_bay_identifier - phy_reset - phy_enable - set_phy_speed - smp_handler Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add framework to issue MPT transport commands to controllers. Also issue the MPT transport commands to get the manufacturing info of SAS expander device. Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL) whenever the corresponding device is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.comReported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
-
Sreekanth Reddy authored
When device is registered with the STL then get the corresponding device's target object using the rphy in below callback functions: - mpi3mr_target_alloc() - mpi3mr_slave_alloc() - mpi3mr_slave_configure() - mpi3mr_slave_destroy() Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register/unregister the expander devices to SCSI Transport Layer(STL) whenever the corresponding expander is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if multipath capability is disabled in the controller's firmware. Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add the following helper functions: - Update the host phys with STL - Remove the device's SAS port with STL Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.comReviewed-by:
Himanshu Madhani <himanshu.madani@oracle.com> Signed-off-by:
-
Sreekanth Reddy authored
Add the following helper functions: - Get the device's sas address by reading corresponding device's Device page0 - Get the expander object from expander list based on expander's handle - Get the target device object from target device list based on device's sas address - Get the expander device object from expander list based on expanders's sas address - Get hba port object from hba port table list based on port's port id Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add framework to register and unregister the host and expander phys with SCSI Transport Layer (STL). Link: https://lore.kernel.org/r/20220804131226.16653-6-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Enable and process the Enclosure device add event. Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add helper functions to retrieve below controller's config pages: - SAS IOUnit Page0 - SAS IOUnit Page1 - Driver Page1 - Device Page0 - SAS Phy Page0 - SAS Phy Page1 - SAS Expander Page0 - SAS Expander Page1 - Enclosure Page0 Also add the helper function to set SAS IOUnit Page1. Link: https://lore.kernel.org/r/20220804131226.16653-4-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add framework to issue config requests commands to controller firmware. Link: https://lore.kernel.org/r/20220804131226.16653-3-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add config and transport request related error & info debug flags and functions. Link: https://lore.kernel.org/r/20220804131226.16653-2-sreekanth.reddy@broadcom.comReviewed-by:
-
Jinyoung Choi authored
Modify messages to fit the format of others. Link: https://lore.kernel.org/r/20220804075519epcms2p148b6ae956b172925b26304b50d6a0da9@epcms2p1Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jinyoung Choi <j-young.choi@samsung.com> Signed-off-by:
-
Jinyoung Choi authored
The explicit flushing should check the following: - UFSHCD_CAP_WB_EN - UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL Add helper to improve readability. Link: https://lore.kernel.org/r/20220804075444epcms2p4a0520880262281f02be65ce0fe50602d@epcms2p4Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Acked-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Jinyoung Choi authored
There is the following quirk to bypass "WB Flush" in Write Booster. - UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL If this quirk is not set, there is no knob that can control "WB Flush". There are three flags that control Write Booster Feature: 1. WB ON/OFF 2. WB Hibern Flush ON/OFF (implicitly) 3. WB Flush ON/OFF (explicit) The sysfs attribute that controls the WB was implemented. (1) In the case of "Hibern Flush", it is always good to turn on. Control may not be required. (2) Finally, "Flush" may be necessary because the Auto-Hibern8 is not supported in a specific environment. So the sysfs attribute that controls this is necessary. (3) Link: https://lore.kernel.org/r/20220804075354epcms2p8c21c894b4e28840c5fc651875b7f435f@epcms2p8Reviewed-by:
-
Jinyoung Choi authored
Change the parameter names of ufshcd_wb_toggle_flush_during_h8() to match the other toggle functions. Link: https://lore.kernel.org/r/20220804075058epcms2p550c578d743fe0a94888b3d71cc9076d4@epcms2p5Reviewed-by:
-
Jinyoung Choi authored
Change to improve readability. Link: https://lore.kernel.org/r/20220804074928epcms2p86582693a39597501b491400a28543a92@epcms2p8Reviewed-by:
-
Peter Wang authored
Mediatek UFS does not want to toggle write booster during clock scaling. Permit host driver to disable wb toggling during clock scaling. Introduce a flag UFSHCD_CAP_WB_WITH_CLK_SCALING to decouple WB and clock scaling. UFSHCD_CAP_WB_WITH_CLK_SCALING is only valid when UFSHCD_CAP_CLK_SCALING is set. Just like UFSHCD_CAP_HIBERN8_WITH_CLK_GATING is valid only when UFSHCD_CAP_CLK_GATING set. Set UFSHCD_CAP_WB_WITH_CLK_SCALING for qcom to compatible legacy design at the same time. Link: https://lore.kernel.org/r/20220804025422.18803-1-peter.wang@mediatek.comReviewed-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Daniil Lunev authored
CLOCK_MONOTONIC is not advanced when the system is in suspend. This becomes problematic when debugging issues related to suspend-resume: the timestamps printed by ufshcd_print_trs can not be correlated with dmesg entries, which are timestamped with local_clock(). Change the used clock to local_clock() for the informational timestamp variables and adds mirroring *_local_clock instances for variables used in subsequent derevations (to not change the semantics of those derevations). Link: https://lore.kernel.org/r/20220804065019.v5.1.I699244ea7efbd326a34a6dfd9b5a31e78400cf68@changeidAcked-by:
Daniil Lunev <dlunev@chromium.org> Signed-off-by:
-
Po-Wen Kao authored
Provide clk-scaling feature in MediaTek UFS platforms. MediaTek platform supports clk-scaling by switching parent clock mux of UFSHCI main clocks: ufs_sel. The driver needs to prevent changing the rate of ufs_sel because its parent PLL clock may be shared between multiple IPs. In order to achieve this goal, the maximum and minimum clock rates of ufs_sel defined in dts should match the rate of "ufs_sel_max_src" and "ufs_sel_min_src" respectively. Link: https://lore.kernel.org/r/20220802235437.4547-6-stanley.chu@mediatek.comReviewed-by:
Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by:
-
Peter Wang authored
If clk-scaling is enabled, performance scaling can be bound to the decision of clk-scaling to avoid unnecessary boosting. In addition, fix missing initialization of pm-qos request. Link: https://lore.kernel.org/r/20220802235437.4547-5-stanley.chu@mediatek.comReviewed-by:
-
Peter Wang authored
Dump more proprietary UFSHCI status registers for easier issue breakdown. Link: https://lore.kernel.org/r/20220802235437.4547-4-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
Provide detailed description in logs for UIC errors for easier issue breakdown. Link: https://lore.kernel.org/r/20220802235437.4547-3-stanley.chu@mediatek.comSigned-off-by:
-
Stanley Chu authored
Remove redundant #include of header file <linux/sched/clock.h>. Link: https://lore.kernel.org/r/20220802235437.4547-2-stanley.chu@mediatek.comReviewed-by:
-
- 14 Aug, 2022 6 commits
-
-
Linus Torvalds authored
-
Yury Norov authored
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by:Yury Norov <yury.norov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs lseek fix from Al Viro: "Fix proc_reg_llseek() breakage. Always had been possible if somebody left NULL ->proc_lseek, became a practical issue now" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: take care to handle NULL ->proc_lseek()
-
Al Viro authored
Easily done now, just by clearing FMODE_LSEEK in ->f_mode during proc_reg_open() for such entries. Fixes: 868941b1 "fs: remove no_llseek" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: - 'perf c2c' now supports ARM64, adjust its output to cope with differences with what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well! - Refactor the JSON processing, making the output more compact and thus reducing the size of the resulting perf binary - Improvements for 'perf offcpu' profiling, including tracking child processes - Update Intel JSON metrics and events files for broadwellde, broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding, sapphirerapids, skylakex and snowridgex - Add 'perf stat' JSON output and a 'perf test' entry for it - Ignore memfd and anonymous mmap events if jitdump present - Refactor 'perf test' shell tests allowing subdirs - Fix an error handling path in 'parse_perf_probe_command()' - Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window - Print debuginfod queries if -v option is used, to explain delays in processing when debuginfo servers are enabled to fetch DSOs with richer symbol tables - Improve error message for 'perf record -p not_existing_pid' - Fix openssl and libbpf feature detection - Add PMU pai_crypto event description for IBM z16 on 'perf list' - Fix typos and duplicated words on comments in various places * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits) perf test: Refactor shell tests allowing subdirs perf vendor events: Update events for snowridgex perf vendor events: Update events and metrics for skylakex perf vendor events: Update metrics for sapphirerapids perf vendor events: Update events for knightslanding perf vendor events: Update metrics for jaketown perf vendor events: Update metrics for ivytown perf vendor events: Update events and metrics for icelakex perf vendor events: Update events and metrics for haswellx perf vendor events: Update events and metrics for cascadelakex perf vendor events: Update events and metrics for broadwellx perf vendor events: Update metrics for broadwellde perf jevents: Fold strings optimization perf jevents: Compress the pmu_events_table perf metrics: Copy entire pmu_event in find metric perf pmu-events: Hide the pmu_events perf pmu-events: Don't assume pmu_event is an array perf pmu-events: Move test events/metrics to JSON perf test: Use full metric resolution perf pmu-events: Hide pmu_events_map ...
-
