- 21 Jul, 2017 30 commits
-
-
Kees Cook authored
commit 02445990 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.orgSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 6a9af90a upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. 4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
commit eab09532 upstream. The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.) With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused. For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions. Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region). To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs. For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution. Fixes: d1fd836d ("mm: split ET_DYN ASLR from mmap ASLR") Link: http://lkml.kernel.org/r/20170621173201.GA114489@beastSigned-off-by:
Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Cyril Bur authored
commit 8d81ae05 upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by:
Cyril Bur <cyrilbur@gmail.com> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sahitya Tummala authored
commit b17c070f upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
Sahitya Tummala <stummala@codeaurora.org> Suggested-by:
Jan Kara <jack@suse.cz> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
-
Sahitya Tummala authored
commit 2c80cd57 upstream. list_lru_count_node() iterates over all memcgs to get the total number of entries on the node but it can race with memcg_drain_all_list_lrus(), which migrates the entries from a dead cgroup to another. This can return incorrect number of entries from list_lru_count_node(). Fix this by keeping track of entries per node and simply return it in list_lru_count_node(). Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
-
Marcin Nowakowski authored
commit c0d80dda upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ben Hutchings authored
commit 98dcea0c upstream. liblockdep has been broken since commit 75dd602a ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Helge Deller authored
commit 649aa242 upstream. This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm(). This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off(). Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Thomas Bogendoerfer authored
commit 33f9e024 upstream. Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG: CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156 task: 000000009e050000 task.stack: 000000009e04c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001111 Not tainted r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8 CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2 ORIG_R28: 0000000000000200 IAOQ[0]: sba_dma_supported+0x80/0xd0 IAOQ[1]: sba_dma_supported+0x84/0xd0 RP(r2): parport_pc_probe_port+0x178/0x1200 Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Eric Biggers authored
commit b0f94efd upstream. Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
-
Helge Deller authored
commit 24746231 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by:
-
Suzuki K Poulose authored
commit 866d7c1b upstream. The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN: [ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051] This patch adds the check to make sure the cpu is valid. Fixes: commit 021f6537 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Srinivas Dasari authored
commit 9361df14 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID. Fixes: 67fbb16b ("nl80211: PMKSA caching support") Signed-off-by:
Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Srinivas Dasari authored
commit d7f13f74 upstream. validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy. Validate size of each attribute before parsing to avoid potential buffer overread. Fixes: 2a519311 ("cfg80211/nl80211: scanning (and mac80211 update to use it)") Signed-off-by:
-
Srinivas Dasari authored
commit 8feb69c7 upstream. Buffer overread may happen as nl80211_set_station() reads 4 bytes from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without validating the size of data received when userspace sends less than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE. Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid the buffer overread. Fixes: 3b1c5a53 ("{cfg,nl}80211: mesh power mode primitives and userspace access") Signed-off-by:
-
Arend van Spriel authored
commit 8f44c9a4 upstream. The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by:
"freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sowmini Varadhan authored
commit 0933a578 upstream. There are two problems with calling sock_create_kern() from rds_tcp_accept_one() 1. it sets up a new_sock->sk that is wasteful, because this ->sk is going to get replaced by inet_accept() in the subsequent ->accept() 2. The new_sock->sk is a leaked reference in sock_graft() which expects to find a null parent->sk Avoid these problems by calling sock_create_lite(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit f630c38e upstream. When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125db ("net: Introduce VRF device driver") Reported-by:
Chris Cormier <chriscormier@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
commit f06b7549 upstream. Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by:
João Taveira Araújo <joao.taveira@gmail.com> Reported-by:
Lennert Buytenhek <buytenh@wantstofly.org> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by:
-
Sabrina Dubroca authored
commit ec8add2a upstream. Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1): ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 In the same situation, this will succeed and not remove the address (2): ip addr add 1111::12/64 dev $DEV ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why: * If the device is not ready: * - keep it tentative if it is a permanent address. * - otherwise, kill it. We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2). addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses. Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Michal Kubeček authored
commit e44699d2 upstream. Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Daniel Borkmann authored
commit 6bdf6abc upstream. Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
commit 6f64ec74 upstream. Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
WANG Cong authored
commit d747a7a5 upstream. We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by:
Andrei Vagin <avagin@gmail.com> Reported-by:
Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Richard Cochran authored
commit db9d8b29 upstream. The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
WANG Cong authored
commit 60abc0be upstream. The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
Zach Brown authored
commit b866203d upstream. The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by:
Zach Brown <zach.brown@ni.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Gao Feng authored
commit c1a4872e upstream. When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Acked-by:
-
Eric Dumazet authored
commit 87b60cfa upstream. Dmitry reported uses after free in qdisc code [1] The problem here is that ops->init() can return an error. qdisc_create_dflt() then call ops->destroy(), while qdisc_create() does _not_ call it. Four qdisc chose to call their own ops->destroy(), assuming their caller would not. This patch makes sure qdisc_create() calls ops->destroy() and fixes the four qdisc to avoid double free. [1] BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr ffff8801d415d440 Read of size 8 by task syz-executor2/5030 CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400 ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898 ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0 Call Trace: [<ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51 [<ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285 [<ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326 [<ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 [<ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953 [<ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848 [<ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline] [<ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064 [<ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403 [<ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858 [<ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926 [<ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260 [<ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546 [<ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879 [<ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958 [<ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline] [<ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611 [<ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline] [<ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617 [<ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17 Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
- 15 Jul, 2017 10 commits
-
-
Greg Kroah-Hartman authored
-
Maciej S. Szmigiero authored
commit 5a91206f upstream. When saa7134 module driving a Medion 7134 card is reloaded reads of this card EEPROM (required for automatic detection of tuner model) will be corrupted due to I2C gate in DVB-T demod being left closed. This sometimes also happens on first saa7134 module load after a warm reboot. Fix this by opening this I2C gate before doing EEPROM read during i2c initialization. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Mikulas Patocka authored
commit 99c13b8c upstream. The pat_enabled() logic is broken on CPUs which do not support PAT and where the initialization code fails to call pat_init(). Due to that the enabled flag stays true and pat_enabled() returns true wrongfully. As a consequence the mappings, e.g. for Xorg, are set up with the wrong caching mode and the required MTRR setups are omitted. To cure this the following changes are required: 1) Make pat_enabled() return true only if PAT initialization was invoked and successful. 2) Invoke init_cache_modes() unconditionally in setup_arch() and remove the extra callsites in pat_disable() and the pat disabled code path in pat_init(). Also rename __pat_enabled to pat_disabled to reflect the real purpose of this variable. Fixes: 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bernhard Held <berny156@gmx.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Chao Yu authored
commit 1ea1516f upstream. kstrtoull returns 0 on success, however, in reserved_clusters_store we will return -EINVAL if kstrtoull returns 0, it makes us fail to update reserved_clusters value through sysfs. Fixes: 76d33bcaSigned-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Miao Xie <miaoxie@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Ian Abbott authored
commit a9332e9a upstream. There is a clean-up bug in the core comedi module initialization functions, `comedi_init()`. If the `comedi_num_legacy_minors` module parameter is non-zero (and valid), it creates that many "legacy" devices and registers them in SysFS. A failure causes the function to clean up and return an error. Unfortunately, it fails to destroy the "comedi" class that was created earlier. Fix it by adding a call to `class_destroy(comedi_class)` at the appropriate place in the clean-up sequence. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Malcolm Priestley authored
commit dc32190f upstream. The key table is not intialized correctly without this call. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Neal Cardwell authored
commit d88270ee upstream. This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c24 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c24 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jason Yan authored
commit 3fb632e4 upstream. The sb->super_offset should be big-endian, but the rdev->sb_start is in host byte order, so fix this by adding cpu_to_le64. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jason Yan authored
commit 13459213 upstream. The sb->layout is of type __le32, so we shoud use le32_to_cpu. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 22a9f41b upstream. The readdir() function is thread safe as long as just one thread uses a DIR, which is the case when parsing tracepoint event definitions, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wddn49r6bz6wq4ee3dxbl7lo@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
