- 26 Mar, 2021 2 commits
-
-
Kai-Heng Feng authored
Rear Mic on Lenovo P620 cannot record after S3, despite that there's no error and the other two functions of the USB audio, Line In and Line Out, work just fine. The mic starts to work again after running userspace app like "alsactl store". Following the lead, the evidence shows that as soon as connector status is queried, the mic can work again. So also check connector value on resume to "wake up" the USB audio to make it functional. This can be device specific, however I think this generic approach may benefit more than one device. Now the resume callback checks connector, and a new callback, reset_resume, to also restore switches and volumes. Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210325165918.22593-2-kai.heng.feng@canonical.comSigned-off-by:
-
Kai-Heng Feng authored
This is preparation for next patch, no functional change intended. Signed-off-by:
-
- 25 Mar, 2021 1 commit
-
-
Kai Vehmanen authored
Increase the device select range to 4 on platforms supporting 4 concurrent displays. This fixes a problem in scenario where total of 4 displays are active, and 3 of these are audio capable DP receivers and connected to a DP-MST hub. Due to incorrect range for device select, audio could not be played to the 3rd monitor in DP-MST hub. BugLink: https://github.com/thesofproject/linux/issues/2798Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210324172337.51730-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 22 Mar, 2021 7 commits
-
-
Arnd Bergmann authored
Building with 'make W=1' shows some warnings about empty function-style macros: sound/core/pcm_memory.c: In function 'preallocate_pages': sound/core/pcm_memory.c:236:49: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 236 | preallocate_info_init(substream); sound/core/seq_device.c: In function 'snd_seq_device_dev_register': sound/core/seq_device.c:163:41: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 163 | queue_autoload_drivers(); Change them to empty inline functions, which are more robust here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322103128.547199-1-arnd@kernel.orgSigned-off-by:
-
Takashi Sakamoto authored
Current implementation of bebob driver doesn't correctly handle the case that the device has multiple MIDI ports. The cause is the number of MIDI conformant data channels is passed to AM824 data block processing layer. This commit fixes the bug. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210321032831.340278-4-o-takashi@sakamocchi.jpSigned-off-by:
-
Takashi Sakamoto authored
Current implementation counts the number of input/output plugs for MIDI type and uses the count as the number of physical MIDI ports. However, the number of channels of the port represents the count. This commit fixes the bug by additional vendor-specific AVC command extension. Signed-off-by:
-
Takashi Sakamoto authored
ALSA bebob driver scans supported formats of packet for each direction when probing the target device. Some helper functions are used for the scanning, however its implementation is not necessarily irredundant. This commit refactors the helper functions to remove redundant codes. Signed-off-by:
-
Tong Zhang authored
rme9652 wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device [ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.759968] Call Trace: [ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652] [ 1.760434] release_card_device+0x4b/0x80 [snd] [ 1.760679] device_release+0x3b/0xa0 [ 1.760874] kobject_put+0x94/0x1b0 [ 1.761059] put_device+0x13/0x20 [ 1.761235] snd_card_free+0x61/0x90 [snd] [ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652] Suggested-by:
Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20210321153840.378226-4-ztong0001@gmail.comSigned-off-by:
-
Tong Zhang authored
hdspm wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device [ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.795181] Call Trace: [ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm] [ 1.795595] release_card_device+0x4b/0x80 [snd] [ 1.795860] device_release+0x3b/0xa0 [ 1.796072] kobject_put+0x94/0x1b0 [ 1.796260] put_device+0x13/0x20 [ 1.796438] snd_card_free+0x61/0x90 [snd] [ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm] Suggested-by:
-
Tong Zhang authored
hdsp wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device [ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.766985] Call Trace: [ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp] [ 1.767388] release_card_device+0x4b/0x80 [snd] [ 1.767639] device_release+0x3b/0xa0 [ 1.767838] kobject_put+0x94/0x1b0 [ 1.768027] put_device+0x13/0x20 [ 1.768207] snd_card_free+0x61/0x90 [snd] [ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp] Suggested-by:
-
- 19 Mar, 2021 4 commits
-
-
Amadeusz Sławiński authored
This reverts commit f8e4ae10 ("ALSA: hda: Allow setting preallocation again for x86"). The reverted commit itself is a revert of c31427d0 ("ALSA: hda: No preallocation on x86 platforms"). It was needed because HDA allowed very big allocations, up to 1GB per stream. However as previous commit in this series changes maximum allowed allocation per stream to 4MB, we can safely revert it back. On systems where there are a lot of FrontEnds, when CONFIG_SND_HDA_PREALLOC_SIZE != 0 ALSA core allocates memory for each FE, which may cause out of memory problems due to per card limit. Force config to 0 on X86, so memory will be allocated on as needed basis. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201251#c322Suggested-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20210318160618.2504068-4-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
When SND_HDA_PREALLOC_SIZE is set to 0, applications can request as much memory as there is allowed. With value of AZX_MAX_BUF_SIZE it is 1GB per stream, which is not realistic use case. Change it 4MB. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201251#c322Suggested-by:
-
Amadeusz Sławiński authored
Add debug prints after calls of do_alloc_pages. One simplification would be to move print into do_alloc_pages, however it would cause spam in logs, as preallocate_pcm_pages loops over do_alloc_pages trying lower values in case of failures. Reviewed-by:
-
huangjianghui authored
Signed-off-by:
huangjianghui <huangjianghui@uniontech.com> Link: https://lore.kernel.org/r/20210319013854.48830-1-huangjianghui@uniontech.comSigned-off-by:
-
- 18 Mar, 2021 2 commits
-
-
Aditya Srivastava authored
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are files in sound/pci/ctxfi which follow this syntax in their file headers, i.e. start with '/**' like comments, which causes unexpected warnings from kernel-doc. E.g., running scripts/kernel-doc -none on sound/pci/ctxfi/ctresource.c causes this warning: "warning: wrong kernel-doc identifier on line: * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved." Similarly for other files too. Provide a simple fix by replacing the kernel-doc like comment syntax with general format, i.e. "/*", to prevent kernel-doc from parsing it. Signed-off-by:
Aditya Srivastava <yashsri421@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210317203932.23993-1-yashsri421@gmail.comSigned-off-by:
-
Aditya Srivastava authored
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are files in sound/pci/asihpi which follow this syntax in their file headers, i.e. start with '/**' like comments, which causes unexpected warnings from kernel-doc. E.g., running scripts/kernel-doc -none on sound/pci/asihpi/hpidspcd.h causes this warning: "warning: Cannot understand on line 4 - I thought it was a doc line" Provide a simple fix by replacing the kernel-doc like comment syntax with general format, i.e. "/*", to prevent kernel-doc from parsing it. Signed-off-by:
-
- 16 Mar, 2021 4 commits
-
-
Stefan Binding authored
CS8409/CS42L42 Driver currently does most of the platform specific setup inside the main body of the code, however, this setup can be moved into fixup functions, to make the driver more generic. Making the driver more generic, allows the driver to use the cs_parse_auto_config function in the patch function. This function forces all of the ADCs to be permanently powered, which means the cap_sync_hook function is no longer needed to restart the stream, when the jack has been ejected. Since the codec is re-initialized on every init/resume, there is no need to add specific verbs to be run on init, and instead these can be combined with the initialization verbs, which are run on init. In addition, the extra fixup verbs are no longer required, since this is taken care of elsewhere. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 [ Use fallthrough macro instead of comment -- tiwai ] Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210315190716.47686-5-vitalyr@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
Existing name "Headset Mic Volume Control" causes multiple Microphone entries to appear in UI. Using name "Mic Volume Control" ensures only a single Microphone entry exists when the Headset is connected. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
You-Sheng Yang <vicamo.yang@canonical.com> Link: https://lore.kernel.org/r/20210315190716.47686-4-vitalyr@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
Minor changes, clean up code, remove unnecessary initialization of variables, reduced number of warnings from ./scripts/checkpatch.pl from 19 to 0 Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
-
Stefan Binding authored
Also removing 2 redundant cs8409_i2c_read() calls, as we already did read them in a code above. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
-
- 11 Mar, 2021 1 commit
-
-
Wolfram Sang authored
The I2C attach_adapter callback is gone. Remove this reference. Signed-off-by:
Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20210310193227.333140-1-wsa@kernel.orgSigned-off-by:
-
- 07 Mar, 2021 14 commits
-
-
Stefan Binding authored
CS8409 does not support Volume Control for NIDs 0x24 (the Headphones), or 0x34 (The Headset Mic). However, CS42L42 codec does support gain control for both. We can add support for Volume Controls, by writing the the CS42L42 regmap via i2c commands, using custom info, get and put volume functions, saved in the control. Tested on DELL Inspiron-3500, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
-
Vitaly Rodionov authored
In the case of CS8409 we do not have unsol events from NID's 0x24 and 0x34 where hs mic and hp are connected. Companion codec CS42L42 will generate interrupt via gpio 4 to notify jack events. We have to overwrite standard snd_hda_jack_unsol_event(), read CS42L42 jack detect status registers and then notify status via generic snd_hda_jack_unsol_event() call. Tested on DELL Inspiron-3500, DELL Inspiron-3501, DELL Inspiron-3505. Signed-off-by:
-
Vitaly Rodionov authored
Dell's laptops Inspiron 3500, Inspiron 3501, Inspiron 3505 are using Cirrus Logic CS8409 HDA bridge with CS42L42 companion codec. The CS8409 is a multichannel HD audio routing controller. CS8409 includes support for four channels of digital microphone data and two bidirectional ASPs for up to 32 channels of TDM data or 4 channels of I2S data. The CS8409 is intended to be used with a remote companion codec that implements high performance analog functions in close physical proximity to the end-equipment audio port or speaker driver. The CS42L42 is a low-power audio codec with integrated MIPI SoundWire interface or I2C/I2S/TDM interfaces designed for portable applications. It provides a high-dynamic range, stereo DAC for audio playback and a mono high-dynamic-range ADC for audio capture CS42L42 is connected to CS8409 HDA bridge via I2C and I2S. CS8409 CS42L42 ------- -------- ASP1.A TX --> ASP_SDIN ASP1.A RX <-- ASP_SDOUT GPIO5 --> RST# GPIO4 <-- INT# GPIO3 <-- WAKE# GPIO7 <-> I2C SDA GPIO6 --> I2C CLK Tested on DELL Inspiron-3500, DELL Inspiron-3501, DELL Inspiron-3505 This patch will register CS8409 with sound card and create input/output paths and two input devices, initialise CS42L42 companion codec and configure it for ASP TX/RX TDM mode, 24bit, 48kHz. cat /proc/asound/pcm 00-00: CS8409 Analog : CS8409 Analog : playback 1 : capture 1 00-03: HDMI 0 : HDMI 0 : playback 1 dmesg snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS8409: line_outs=1 (0x2c/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x24/0x0/0x0/0x0/0x0) snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_cirrus hdaudioC0D0: inputs: snd_hda_codec_cirrus hdaudioC0D0: Internal Mic=0x44 snd_hda_codec_cirrus hdaudioC0D0: Mic=0x34 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 Signed-off-by:
-
Vitaly Rodionov authored
In preparation to support Cirrus Logic CS8409 HDA bridge on new Dell platforms it is nessasary to increase AUTO_CFG_MAX_INS and AUTO_CFG_NUM_INPUTS values. Currently AUTO_CFG_MAX_INS is limited to 8, but Cirrus Logic HDA bridge CS8409 has 18 input pins, 16 ASP receivers and 2 DMIC inputs. We have to increase this value to 18, so generic code can handle this correctly. Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500 Signed-off-by:
-
Takashi Iwai authored
ALSA: add virtio sound driver This series implements a driver part of the virtio sound device specification v8 [1]. The driver supports PCM playback and capture substreams, jack and channel map controls. A message-based transport is used to write/read PCM frames to/from a device. As a device part was used OpenSynergy proprietary implementation. v7 changes: - Moved the snd_pcm_period_elapsed() call from the interrupt handler to the kernel worker for being consistent with the non-atomic mode of the PCM device. - Removed SNDRV_PCM_INFO_RESUME flag. Now ops->prepare() sets the parameters for the substream if it was previously suspended. - Some additional code readability improvements/comments. [1] https://lists.oasis-open.org/archives/virtio-dev/202003/msg00185.html Link: https://lore.kernel.org/r/20210302164709.3142702-1-anton.yakovlev@opensynergy.com
-
Anton Yakovlev authored
All running PCM substreams are stopped on device suspend and restarted on device resume. Signed-off-by:
Anton Yakovlev <anton.yakovlev@opensynergy.com> Link: https://lore.kernel.org/r/20210302164709.3142702-10-anton.yakovlev@opensynergy.comSigned-off-by:
-
Anton Yakovlev authored
Enumerate all available PCM channel maps and create ALSA controls. Signed-off-by:
-
Anton Yakovlev authored
Enumerate all available jacks and create ALSA controls. At the moment jacks have a simple implementation and can only be used to receive notifications about a plugged in/out device. Signed-off-by:
-
Anton Yakovlev authored
Introduce the operators required for the operation of substreams. Signed-off-by:
-
Anton Yakovlev authored
The driver implements a message-based transport for I/O substream operations. Before the start of the substream, the hardware buffer is sliced into I/O messages, the number of which is equal to the current number of periods. The size of each message is equal to the current size of one period. I/O messages are organized in an ordered queue. The completion of the I/O message indicates an elapsed period (the only exception is the end of the stream for the capture substream). Upon completion, the message is automatically re-added to the end of the queue. Signed-off-by:
-
Anton Yakovlev authored
Like the HDA specification, the virtio sound device specification links PCM substreams, jacks and PCM channel maps into functional groups. For each discovered group, a PCM device is created, the number of which coincides with the group number. Introduce the module parameters for setting the hardware buffer parameters: pcm_buffer_ms [=160] pcm_periods_min [=2] pcm_periods_max [=16] pcm_period_ms_min [=10] pcm_period_ms_max [=80] Signed-off-by:
-
Anton Yakovlev authored
The control queue can be used by different parts of the driver to send commands to the device. Control messages can be either synchronous or asynchronous. The lifetime of a message is controlled by a reference count. Introduce a module parameter to set the message completion timeout: msg_timeout_ms [=1000] Signed-off-by:
-
Anton Yakovlev authored
Introduce skeleton of the virtio sound driver. The driver implements the virtio sound device specification, which has become part of the virtio standard. Initial initialization of the device, virtqueues and creation of an empty ALSA sound device. Signed-off-by:
-
Anton Yakovlev authored
The OASIS virtio spec defines a sound device type ID that is not present in the header yet. Signed-off-by:
-
- 06 Mar, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 1 commit
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
