Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

These aren't actually used by the only instance implementing the methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Modern-day mapping_set_error has the ability to squash the usual
negative error code into something appropriate for long-term storage in
a struct address_space -- ENOSPC becomes AS_ENOSPC, and everything else
becomes EIO.  iomap squashes /everything/ to EIO, just as XFS did before
that, but this doesn't make sense.

Fix this by making it so that we can pass ENOSPC to userspace when
writeback fails due to space problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>

Check that the file tail does not cross a page boundary.  Requested by
Andreas.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

kmap_atomic() has the side-effect of disabling pagefaults and
preemption.  kmap_local_page() does not do this and is preferred.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Fix some typos and bad grammar in buffered-io.c to make the comments
easier to read.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Remove the restriction that inline data must start on a page boundary
in a file.  This allows, for example, the first 2KiB to be stored out
of line and the trailing 30 bytes to be stored inline.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

The existing inline data support only works for cases where the entire
file is stored as inline data.  For larger files, EROFS stores the
initial blocks separately and the remainder of the file ("file tail")
adjacent to the inode.  Generalise inline data to allow reading the
inline file tail.  Tails may not cross a page boundary in memory.

We currently have no filesystems that support tails and writing,
so that case is currently disabled (see iomap_write_begin_inline).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Now that the outstanding writes are counted in bytes, there is no need
to use the low-level __bio_try_merge_page API, we can switch back to
always using bio_add_page and simply iomap_add_to_ioend again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Now that the outstanding reads are counted in bytes, there is no need
to use the low-level __bio_try_merge_page API, we can switch back to
always using bio_add_page and simplify iomap_readpage_actor again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top'
   abort, uncovering a design flaw on how namespace information is kept.
   The fix for that is more than we can do right now, leave it for the
   next merge window.

 - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up
   the decoding of some records.

 - Fix PMU alias matching.

Thanks to James Clark and John Garry for these fixes.

* tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  Revert "perf map: Fix dso->nsinfo refcounting"
  perf pmu: Fix alias matching
  perf cs-etm: Split --dump-raw-trace by AUX records

Pull powerpc fixes from Michael Ellerman:

 - Don't use r30 in VDSO code, to avoid breaking existing Go lang
   programs.

 - Change an export symbol to allow non-GPL modules to use spinlocks
   again.

Thanks to Paul Menzel, and Srikar Dronamraju.

* tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: Don't use r30 to avoid breaking Go lang
  powerpc/pseries: Fix regression while building external modules

Pull xfs fixes from Darrick Wong:
 "This contains a bunch of bug fixes in XFS.

  Dave and I have been busy the last couple of weeks to find and fix as
  many log recovery bugs as we can find; here are the results so far. Go
  fstests -g recoveryloop! ;)

   - Fix a number of coordination bugs relating to cache flushes for
     metadata writeback, cache flushes for multi-buffer log writes, and
     FUA writes for single-buffer log writes

   - Fix a bug with incorrect replay of attr3 blocks

   - Fix unnecessary stalls when flushing logs to disk

   - Fix spoofing problems when recovering realtime bitmap blocks"

* tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: prevent spoofing of rtbitmap blocks when recovering buffers
  xfs: limit iclog tail updates
  xfs: need to see iclog flags in tracing
  xfs: Enforce attr3 buffer recovery order
  xfs: logging the on disk inode LSN can make it go backwards
  xfs: avoid unnecessary waits in xfs_log_force_lsn()
  xfs: log forces imply data device cache flushes
  xfs: factor out forced iclog flushes
  xfs: fix ordering violation between cache flushes and tail updates
  xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
  xfs: external logs need to flush data device
  xfs: flush data dev on external log write

Pull cifs fixes from Steve French:
 "Three cifs/smb3 fixes, including two for stable, and a fix for an
  fallocate problem noticed by Clang"

* tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing parsing of backupuid
  smb3: rc uninitialized in one fallocate path
  SMB3: fix readpage for large swap cache

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...

Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007

Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
 "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.

This reverts commit 2d6b74ba.

Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

* acpi-resources:
  Revert "ACPI: resources: Add checks for ACPI IRQ override"

* acpi-dptf:
  ACPI: DPTF: Fix reading of attributes

Pull block fixes from Jens Axboe:

 - gendisk freeing fix (Christoph)

 - blk-iocost wake ordering fix (Tejun)

 - tag allocation error handling fix (John)

 - loop locking fix. While this isn't the prettiest fix in the world,
   nobody has any good alternatives for 5.14. Something to likely
   revisit for 5.15. (Tetsuo)

* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  block: delay freeing the gendisk
  blk-iocost: fix operation ordering in iocg_wake_fn()
  blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
  loop: reintroduce global lock for safe loop_validate_file() traversal

Pull io_uring fixes from Jens Axboe:

 - A fix for block backed reissue (me)

 - Reissue context hardening (me)

 - Async link locking fix (Pavel)

* tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  io_uring: fix poll requests leaking second poll entries
  io_uring: don't block level reissue off completion path
  io_uring: always reissue from task_work context
  io_uring: fix race in unified task_work running
  io_uring: fix io_prep_async_link locking

Pull libata fixlets from Jens Axboe:

 - A fix for PIO highmem (Christoph)

 - Kill HAVE_IDE as it's now unused (Lukas)

* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  arch: Kconfig: clean up obsolete use of HAVE_IDE
  libata: fix ata_pio_sector for CONFIG_HIGHMEM

Pull btrfs fixes from David Sterba:

 - fix -Warray-bounds warning, to help external patchset to make it
   default treewide

 - fix writeable device accounting (syzbot report)

 - fix fsync and log replay after a rename and inode eviction

 - fix potentially lost error code when submitting multiple bios for
   compressed range

* tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: calculate number of eb pages properly in csum_tree_block
  btrfs: fix rw device counting in __btrfs_free_extra_devids
  btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
  btrfs: mark compressed range uptodate only if all bio succeed

Pull HID fixes from Jiri Kosina:

 - resume timing fix for intel-ish driver (Ye Xiang)

 - fix for using incorrect MMIO register in amd_sfh driver (Dylan
   MacKenzie)

 - Cintiq 24HDT / 27QHDT regression fix and touch processing fix for
   Wacom driver (Jason Gerecke)

 - device removal bugfix for ft260 driver (Michael Zaidman)

 - other small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: ft260: fix device removal due to USB disconnect
  HID: wacom: Skip processing of touches with negative slot values
  HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT
  HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"
  HID: apple: Add support for Keychron K1 wireless keyboard
  HID: fix typo in Kconfig
  HID: ft260: fix format type warning in ft260_word_show()
  HID: amd_sfh: Use correct MMIO register for DMA address
  HID: asus: Remove check for same LED brightness on set
  HID: intel-ish-hid: use async resume function

Merge misc fixes from Andrew Morton:
 "7 patches.

  Subsystems affected by this patch series: lib, ocfs2, and mm (slub,
  migration, and memcg)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
  slub: fix unreclaimable slab stat for bulk free
  mm/migrate: fix NR_ISOLATED corruption on 64-bit
  mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
  ocfs2: issue zeroout to EOF blocks
  ocfs2: fix zero out valid data
  lib/test_string.c: move string selftest in the Runtime Testing menu

Merge tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-07-30

The first patch is by me and adds Yasushi SHOJI as a reviewer for the
Microchip CAN BUS Analyzer Tool driver.

Dan Carpenter's patch fixes a signedness bug in the hi311x driver.

Pavel Skripkin provides 4 patches, the first targets the mcba_usb
driver by adding the missing urb->transfer_dma initialization, which
was broken in a previous commit. The last 3 patches fix a memory leak
in the usb_8dev, ems_usb and esd_usb2 driver.

* tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
====================

Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When I use kfree_rcu() to free a large memory allocated by kmalloc_node(),
the following dump occurs.

  BUG: kernel NULL pointer dereference, address: 0000000000000020
  [...]
  Oops: 0000 [#1] SMP
  [...]
  Workqueue: events kfree_rcu_work
  RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline]
  RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline]
  RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363
  [...]
  Call Trace:
    kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293
    kfree_bulk include/linux/slab.h:413 [inline]
    kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300
    process_one_work+0x207/0x530 kernel/workqueue.c:2276
    worker_thread+0x320/0x610 kernel/workqueue.c:2422
    kthread+0x13d/0x160 kernel/kthread.c:313
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

When kmalloc_node() a large memory, page is allocated, not slab, so when
freeing memory via kfree_rcu(), this large memory should not be used by
memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for
slab.

Using page_objcgs_check() instead of page_objcgs() in
memcg_slab_free_hook() to fix this bug.

Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com
Fixes: 270c6a71 ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB uses page allocator for higher order allocations and update
unreclaimable slab stat for such allocations.  At the moment, the bulk
free for SLUB does not share code with normal free code path for these
type of allocations and have missed the stat update.  So, fix the stat
update by common code.  The user visible impact of the bug is the
potential of inconsistent unreclaimable slab stat visible through
meminfo and vmstat.

Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com
Fixes: 6a486c0a ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to commit 2da9f630 ("mm/vmscan: fix NR_ISOLATED_FILE
corruption on 64-bit") avoid using unsigned int for nr_pages.  With
unsigned int type the large unsigned int converts to a large positive
signed long.

Symptoms include CMA allocations hanging forever due to
alloc_contig_range->...->isolate_migratepages_block waiting forever in
"while (unlikely(too_many_isolated(pgdat)))".

Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com
Fixes: c5fc5c3a ("mm: migrate: account THP NUMA migration counters correctly")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Dan Carpenter reports:

    The patch 2d146aa3: "mm: memcontrol: switch to rstat" from Apr
    29, 2021, leads to the following static checker warning:

	    kernel/cgroup/rstat.c:200 cgroup_rstat_flush()
	    warn: sleeping in atomic context

    mm/memcontrol.c
      3572  static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
      3573  {
      3574          unsigned long val;
      3575
      3576          if (mem_cgroup_is_root(memcg)) {
      3577                  cgroup_rstat_flush(memcg->css.cgroup);
			    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    This is from static analysis and potentially a false positive.  The
    problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold()
    which holds an rcu_read_lock().  And the cgroup_rstat_flush() function
    can sleep.

      3578                  val = memcg_page_state(memcg, NR_FILE_PAGES) +
      3579                          memcg_page_state(memcg, NR_ANON_MAPPED);
      3580                  if (swap)
      3581                          val += memcg_page_state(memcg, MEMCG_SWAP);
      3582          } else {
      3583                  if (!swap)
      3584                          val = page_counter_read(&memcg->memory);
      3585                  else
      3586                          val = page_counter_read(&memcg->memsw);
      3587          }
      3588          return val;
      3589  }

__mem_cgroup_threshold() indeed holds the rcu lock.  In addition, the
thresholding code is invoked during stat changes, and those contexts
have irqs disabled as well.  If the lock breaking occurs inside the
flush function, it will result in a sleep from an atomic context.

Use the irqsafe flushing variant in mem_cgroup_usage() to fix this.

Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org
Fixes: 2d146aa3 ("mm: memcontrol: switch to rstat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471 ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

STRING_SELFTEST is presented in the "Library routines" menu.  Move it in
Kernel hacking > Kernel Testing and Coverage > Runtime Testing together
with other similar tests found in lib/

	--- Runtime Testing
	<*>   Test functions located in the hexdump module at runtime
	<*>   Test string functions (NEW)
	<*>   Test functions located in the string_helpers module at runtime
	<*>   Test strscpy*() family of functions at runtime
	<*>   Test kstrto*() family of functions at runtime
	<*>   Test printf() family of functions at runtime
	<*>   Test scanf() family of functions at runtime

Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.comSigned-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The team maintaining the gve driver has undergone some changes,
this updates the MAINTAINERS file accordingly.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.

As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.

The issue was identified with ./scripts/checkkconfigsymbols.py.

Fixes: b7fb14d3 ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.comReviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
   with coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see ems_usb_start) and this flag cannot be used with
   coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>