- 17 Nov, 2019 40 commits
-
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Tested-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Signed-off-by:
-
Ard Biesheuvel authored
Setting the cra_type field is not necessary for skciphers, and ablkcipher will be removed, so drop the assignment from the nitrox driver. Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Tested-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Tested-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Reviewed-by:
Kamil Konieczny <k.konieczny@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Reviewed-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Reviewed-by:
Tero Kristo <t-kristo@ti.com> Tested-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Reviewed-by:
Gary R Hook <gary.hook@amd.com> Tested-by:
-
Ard Biesheuvel authored
Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
-
Ard Biesheuvel authored
Return -EINVAL for input sizes that are not a multiple of the AES block size, since they are not supported by our CBC chaining mode. While at it, remove the pr_err() that reports unsupported key sizes being used: we shouldn't spam the kernel log with that. Fixes: dbaf0624 ("crypto: add virtio-crypto driver") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
-
Ard Biesheuvel authored
In order to allow for CBC to be chained, which is something that the CTS template relies upon, implementations of CBC need to pass the IV to be used for subsequent invocations via the IV buffer. This was not implemented yet for virtio-crypto so implement it now. Fixes: dbaf0624 ("crypto: add virtio-crypto driver") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gonglei <arei.gonglei@huawei.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
-
Corentin Labbe authored
this patchs constify the alg list because this list is never modified. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Ard Biesheuvel authored
Reimplement the library routines to perform chacha20poly1305 en/decryption on scatterlists, without [ab]using the [deprecated] blkcipher interface, which is rather heavyweight and does things we don't really need. Instead, we use the sg_miter API in a novel and clever way, to iterate over the scatterlist in-place (i.e., source == destination, which is the only way this library is expected to be used). That way, we don't have to iterate over two scatterlists in parallel. Another optimization is that, instead of relying on the blkcipher walker to present the input in suitable chunks, we recognize that ChaCha is a streamcipher, and so we can simply deal with partial blocks by keeping a block of cipherstream on the stack and use crypto_xor() to mix it with the in/output. Finally, we omit the scatterwalk_and_copy() call if the last element of the scatterlist covers the MAC as well (which is the common case), avoiding the need to walk the scatterlist and kmap() the page twice. Signed-off-by:
-
Ard Biesheuvel authored
This incorporates the chacha20poly1305 from the Zinc library, retaining the library interface, but replacing the implementation with calls into the code that already existed in the kernel's crypto API. Note that this library API does not implement RFC7539 fully, given that it is limited to 64-bit nonces. (The 96-bit nonce version that was part of the selftest only has been removed, along with the 96-bit nonce test vectors that only tested the selftest but not the actual library itself) Signed-off-by:
-
Jason A. Donenfeld authored
This ports the SUPERCOP implementation for usage in kernel space. In addition to the usual header, macro, and style changes required for kernel space, it makes a few small changes to the code: - The stack alignment is relaxed to 16 bytes. - Superfluous mov statements have been removed. - ldr for constants has been replaced with movw. - ldreq has been replaced with moveq. - The str epilogue has been made more idiomatic. - SIMD registers are not pushed and popped at the beginning and end. - The prologue and epilogue have been made idiomatic. - A hole has been removed from the stack, saving 32 bytes. - We write-back the base register whenever possible for vld1.8. - Some multiplications have been reordered for better A7 performance. There are more opportunities for cleanup, since this code is from qhasm, which doesn't always do the most opportune thing. But even prior to extensive hand optimizations, this code delivers significant performance improvements (given in get_cycles() per call): ----------- ------------- | generic C | this commit | ------------ ----------- ------------- | Cortex-A7 | 49136 | 22395 | ------------ ----------- ------------- | Cortex-A17 | 17326 | 4983 | ------------ ----------- ------------- Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> [ardb: - move to arch/arm/crypto - wire into lib/crypto framework - implement crypto API KPP hooks ] Signed-off-by:
-
Jason A. Donenfeld authored
This comes from Dan Bernstein and Peter Schwabe's public domain NEON code, and is included here in raw form so that subsequent commits that fix these up for the kernel can see how it has changed. This code does have some entirely cosmetic formatting differences, adding indentation and so forth, so that when we actually port it for use in the kernel in the subsequent commit, it's obvious what's changed in the process. This code originates from SUPERCOP 20180818, available at <https://bench.cr.yp.to/supercop.html>. Signed-off-by:
-
Jason A. Donenfeld authored
This implementation is the fastest available x86_64 implementation, and unlike Sandy2x, it doesn't requie use of the floating point registers at all. Instead it makes use of BMI2 and ADX, available on recent microarchitectures. The implementation was written by Armando Faz-Hernández with contributions (upstream) from Samuel Neves and me, in addition to further changes in the kernel implementation from us. Signed-off-by:
Samuel Neves <sneves@dei.uc.pt> Co-developed-by:
-
Ard Biesheuvel authored
Arnd reports that the 32-bit generic library code for Curve25119 ends up using an excessive amount of stack space when built with Clang: lib/crypto/curve25519-fiat32.c:756:6: error: stack frame size of 1384 bytes in function 'curve25519_generic' [-Werror,-Wframe-larger-than=] Let's give some hints to the compiler regarding which routines should not be inlined, to prevent it from running out of registers and spilling to the stack. The resulting code performs identically under both GCC and Clang, and makes the warning go away. Suggested-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ard Biesheuvel authored
Expose the generic Curve25519 library via the crypto API KPP interface. Signed-off-by:
-
Ard Biesheuvel authored
In preparation of introducing KPP implementations of Curve25519, import the set of test cases proposed by the Zinc patch set, but converted to the KPP format. Signed-off-by:
-
Jason A. Donenfeld authored
This contains two formally verified C implementations of the Curve25519 scalar multiplication function, one for 32-bit systems, and one for 64-bit systems whose compiler supports efficient 128-bit integer types. Not only are these implementations formally verified, but they are also the fastest available C implementations. They have been modified to be friendly to kernel space and to be generally less horrendous looking, but still an effort has been made to retain their formally verified characteristic, and so the C might look slightly unidiomatic. The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto Information: https://cr.yp.to/ecdh.htmlSigned-off-by:
-
Jason A. Donenfeld authored
These implementations from Samuel Neves support AVX and AVX-512VL. Originally this used AVX-512F, but Skylake thermal throttling made AVX-512VL more attractive and possible to do with negligable difference. Signed-off-by:
-
Ard Biesheuvel authored
Wire up our newly added Blake2s implementation via the shash API. Signed-off-by:
-
Ard Biesheuvel authored
As suggested by Eric for the Blake2b implementation contributed by David, introduce a set of test vectors for Blake2s covering different digest and key sizes. blake2s-128 blake2s-160 blake2s-224 blake2s-256 --------------------------------------------------- len=0 | klen=0 klen=1 klen=16 klen=32 len=1 | klen=16 klen=32 klen=0 klen=1 len=7 | klen=32 klen=0 klen=1 klen=16 len=15 | klen=1 klen=16 klen=32 klen=0 len=64 | klen=0 klen=1 klen=16 klen=32 len=247 | klen=16 klen=32 klen=0 klen=1 len=256 | klen=32 klen=0 klen=1 klen=16 Cc: David Sterba <dsterba@suse.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: -
Jason A. Donenfeld authored
The C implementation was originally based on Samuel Neves' public domain reference implementation but has since been heavily modified for the kernel. We're able to do compile-time optimizations by moving some scaffolding around the final function into the header file. Information: https://blake2.net/Signed-off-by:
-
Ard Biesheuvel authored
In order to use 128-bit integer arithmetic in C code, the architecture needs to have declared support for it by setting ARCH_SUPPORTS_INT128, and it requires a version of the toolchain that supports this at build time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test whether __SIZEOF_INT128__ is defined, since this is only the case for compilers that can support 128-bit integers. Let's fold this additional test into the Kconfig declaration of ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles, e.g., to decide whether a certain object needs to be included in the first place. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Ard Biesheuvel authored
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken straight from this upstream GitHub repository [0] at commit d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes required to build it as part of a Linux kernel module. [0] https://github.com/dot-asm/cryptogamsCo-developed-by:
Andy Polyakov <appro@cryptogams.org> Signed-off-by:
René van Dorst <opensource@vdorst.com> Signed-off-by:
-
Ard Biesheuvel authored
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL project. The file 'poly1305-armv4.pl' is taken straight from this upstream GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f, and already contains all the changes required to build it as part of a Linux kernel module. [0] https://github.com/dot-asm/cryptogamsCo-developed-by:
-
Ard Biesheuvel authored
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL project. The file 'poly1305-armv8.pl' is taken straight from this upstream GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f, and already contains all the changes required to build it as part of a Linux kernel module. [0] https://github.com/dot-asm/cryptogamsCo-developed-by:
-
Ard Biesheuvel authored
Implement the arch init/update/final Poly1305 library routines in the accelerated SIMD driver for x86 so they are accessible to users of the Poly1305 library interface as well. Signed-off-by:
-
Ard Biesheuvel authored
Remove the dependency on the generic Poly1305 driver. Instead, depend on the generic library so that we only reuse code without pulling in the generic skcipher implementation as well. While at it, remove the logic that prefers the non-SIMD path for short inputs - this is no longer necessary after recent FPU handling changes on x86. Since this removes the last remaining user of the routines exported by the generic shash driver, unexport them and make them static. Signed-off-by:
-
Ard Biesheuvel authored
Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by:
-
Ard Biesheuvel authored
In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by:
-
