- 31 Jan, 2018 31 commits
-
-
Eric Dumazet authored
[ Upstream commit 7c68d1a6 ] Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b4 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felix Fietkau authored
[ Upstream commit ad23b750 ] Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Yuiko Oshino authored
[ Upstream commit a5b1379a ] Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 95ef498d ] In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Mike Maloney authored
[ Upstream commit 749439bf ] The logic in __ip6_append_data() assumes that the MTU is at least large enough for the headers. A device's MTU may be adjusted after being added while sendmsg() is processing data, resulting in __ip6_append_data() seeing any MTU. For an mtu smaller than the size of the fragmentation header, the math results in a negative 'maxfraglen', which causes problems when refragmenting any previous skb in the skb_write_queue, leaving it possibly malformed. Instead sendmsg returns EINVAL when the mtu is calculated to be less than IPV6_MIN_MTU. Found by syzkaller: kernel BUG at ./include/linux/skbuff.h:2064! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d0b68580 task.stack: ffff8801ac6b8000 RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline] RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216 RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000 RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0 RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000 R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8 R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000 FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:911 [inline] udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093 udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x352/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9 RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005 RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69 R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000 Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570 RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570 Reported-by:
Mike Maloney <maloney@google.com> Reviewed-by:
-
Ben Hutchings authored
[ Upstream commit e9191ffb ] Commit 513674b5 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit dd5684ec ] ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dab ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa39 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by:
-
Jim Westfall authored
[ Upstream commit cd9ff4de ] Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices to avoid making an entry for every remote ip the device needs to talk to. This used the be the old behavior but became broken in a263b309 (ipv4: Make neigh lookups directly in output packet path) and later removed in 0bb4087c (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) because it was broken. Signed-off-by:
Jim Westfall <jwestfall@surrealistic.net> Signed-off-by:
-
Jim Westfall authored
[ Upstream commit 096b9854 ] Use n->primary_key instead of pkey to account for the possibility that a neigh constructor function may have modified the primary_key value. Signed-off-by:
-
Boris Brezillon authored
commit 17b11b76 upstream. When saving BOs in the hang state we skip one entry of the kernel_state->bo[] array, thus leaving it to NULL. This leads to a NULL pointer dereference when, later in this function, we iterate over all BOs to check their ->madv state. Fixes: ca26d28b ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Russell King authored
commit 091f0248 upstream. As per 90caccdd ("bpf: fix bpf_tail_call() x64 JIT"), the index used for array lookup is defined to be 32-bit wide. Update a misleading comment that suggests it is 64-bit wide. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
commit ec19e02b upstream. When the source and destination register are identical, our JIT does not generate correct code, which leads to kernel oopses. Fix this by (a) generating more efficient code, and (b) making use of the temporary earlier if we will overwrite the address register. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
Russell King authored
commit 02088d9b upstream. When an eBPF program tail-calls another eBPF program, it enters it after the prologue to avoid having complex stack manipulations. This can lead to kernel oopses, and similar. Resolve this by always using a fixed stack layout, a CPU register frame pointer, and using this when reloading registers before returning. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
Russell King authored
commit 0005e55a upstream. The stack layout documentation incorrectly suggests that the BPF JIT scratch space starts immediately below BPF_FP. This is not correct, so let's fix the documentation to reflect reality. Signed-off-by:
-
Russell King authored
commit 70ec3a6c upstream. Move the stack documentation towards the top of the file, where it's relevant for things like the register layout. Signed-off-by:
-
Russell King authored
commit d1220efd upstream. As per 2dede2d8 ("ARM EABI: stack pointer must be 64-bit aligned after a CPU exception") the stack should be aligned to a 64-bit boundary on EABI systems. Ensure that the eBPF JIT appropraitely aligns the stack. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
Russell King authored
commit f4483f2c upstream. When a tail call fails, it is documented that the tail call should continue execution at the following instruction. An example tail call sequence is: 12: (85) call bpf_tail_call#12 13: (b7) r0 = 0 14: (95) exit The ARM assembler for the tail call in this case ends up branching to instruction 14 instead of instruction 13, resulting in the BPF filter returning a non-zero value: 178: ldr r8, [sp, #588] ; insn 12 17c: ldr r6, [r8, r6] 180: ldr r8, [sp, #580] 184: cmp r8, r6 188: bcs 0x1e8 18c: ldr r6, [sp, #524] 190: ldr r7, [sp, #528] 194: cmp r7, #0 198: cmpeq r6, #32 19c: bhi 0x1e8 1a0: adds r6, r6, #1 1a4: adc r7, r7, #0 1a8: str r6, [sp, #524] 1ac: str r7, [sp, #528] 1b0: mov r6, #104 1b4: ldr r8, [sp, #588] 1b8: add r6, r8, r6 1bc: ldr r8, [sp, #580] 1c0: lsl r7, r8, #2 1c4: ldr r6, [r6, r7] 1c8: cmp r6, #0 1cc: beq 0x1e8 1d0: mov r8, #32 1d4: ldr r6, [r6, r8] 1d8: add r6, r6, #44 1dc: bx r6 1e0: mov r0, #0 ; insn 13 1e4: mov r1, #0 1e8: add sp, sp, #596 ; insn 14 1ec: pop {r4, r5, r6, r7, r8, sl, pc} For other sequences, the tail call could end up branching midway through the following BPF instructions, or maybe off the end of the function, leading to unknown behaviours. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
Russell King authored
commit e9062481 upstream. Avoid the 'bx' instruction on CPUs that have no support for Thumb and thus do not implement this instruction by moving the generation of this opcode to a separate function that selects between: bx reg and mov pc, reg according to the capabilities of the CPU. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
Martin Brandenburg authored
commit 6793f1c4 upstream. After do_readv_writev, the inode cache is invalidated anyway, so i_size will never be read. It will be fetched from the server which will also know about updates from other machines. Fixes deadlock on 32-bit SMP. See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christian Borntraeger authored
commit 1de1ea7e upstream. Some parts of the cmma migration bitmap is already protected with the kvm->lock (e.g. the migration start). On the other hand the read of the cmma bits is not protected against a concurrent free, neither is the emulation of the ESSA instruction. Let's extend the locking to all related ioctls by using the slots lock for - kvm_s390_vm_start_migration - kvm_s390_vm_stop_migration - kvm_s390_set_cmma_bits - kvm_s390_get_cmma_bits In addition to that, we use synchronize_srcu before freeing the migration structure as all users hold kvm->srcu for read. (e.g. the ESSA handler). Reported-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 190df4a2 (KVM: s390: CMMA tracking, ESSA emulation, migration mode) Reviewed-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Josef Bacik authored
commit e4fd493c upstream. In fixing the readdir+pagefault deadlock I accidentally introduced a stale entry regression in readdir. If we get close to full for the temporary buffer, and then skip a few delayed deletions, and then try to add another entry that won't fit, we will emit the entries we found and retry. Unfortunately we delete entries from our del_list as we find them, assuming we won't need them. However our pos will be with whatever our last entry was, which could be before the delayed deletions we skipped, so the next search will add the deleted entries back into our readdir buffer. So instead don't delete entries we find in our del_list so we can make sure we always find our delayed deletions. This is a slight perf hit for readdir with lots of pending deletions, but hopefully this isn't a common occurrence. If it is we can revist this and optimize it. Fixes: 23b5ec74 ("btrfs: fix readdir deadlock with pagefault") Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 2a924d71 upstream. The newer trackpoints from ALPS, Elan and NXP implement a very limited subset of extended commands and controls that the original trackpoints implemented, so we should not be exposing not working controls in sysfs. The newer trackpoints also do not implement "Power On Reset" or "Read Extended Button Status", so we should not be using these commands during initialization. While we are at it, let's change "unsigned char" to u8 for byte data or bool for booleans and use better suited error codes instead of -1. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Aaron Ma authored
commit f5d07b9e upstream. Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands. They supposed to reply with 0x02, 0x03, or 0x04 in response to the "Read Extended ID" command, so we would know not to try certain extended commands. Unfortunately even some trackpoints reporting the original IBM version (0x01 firmware 0x0e) now respond with incorrect data to the "Get Extended Buttons" command: thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0 Since there are no trackpoints without buttons, let's assume the trackpoint has 3 buttons when we get 0 response to the extended buttons query. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253Signed-off-by:
-
Mark Furneaux authored
commit e5c9c6a8 upstream. Adds support for the current lineup of Xbox One controllers from PDP (Performance Designed Products). These controllers are very picky with their initialization sequence and require an additional 2 packets before they send any input reports. Signed-off-by:
Mark Furneaux <mark@furneaux.ca> Reviewed-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 5132ede0 upstream. This reverts commit 6cfb521a. Turns out distros do not want to make retpoline as part of their "ABI", so this patch should not have been merged. Sorry Andi, this was my fault, I suggested it when your original patch was the "correct" way of doing this instead. Reported-by:
Jiri Kosina <jikos@kernel.org> Fixes: 6cfb521a ("module: Add retpoline tag to VERMAGIC") Acked-by:
Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Signed-off-by:
-
Steffen Klassert authored
commit 76a42011 upstream. We need to run xfrm_resolve_and_create_bundle() with bottom halves off. Otherwise we may reuse an already released dst_enty when the xfrm lookup functions are called from process context. Fixes: c30d78c14a813db39a647b6a348b428 ("xfrm: add xdst pcpu cache") Reported-by:
Darius Ski <darius.ski@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Acked-by: David Miller <davem@davemloft.net>, Signed-off-by:
-
Kevin Cernekee authored
commit 916a2790 upstream. The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, xt_osf_fingers is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: vpnns -- nfnl_osf -f /tmp/pf.os vpnns -- nfnl_osf -f /tmp/pf.os -d These non-root operations successfully modify the systemwide OS fingerprint list. Add new capable() checks so that they can't. Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Kevin Cernekee authored
commit 4b380c42 upstream. The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, nfnl_cthelper_list is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: $ nfct helper list nfct v1.4.4: netlink error: Operation not permitted $ vpnns -- nfct helper list { .name = ftp, .queuenum = 0, .l3protonum = 2, .l4protonum = 6, .priv_data_len = 24, .status = enabled, }; Add capable() checks in nfnetlink_cthelper, as this is cleaner than trying to generalize the solution. Signed-off-by:
-
Vlastimil Babka authored
commit b050e376 upstream. Since commit 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations"), __zone_watermark_ok() check for high-order allocations will shortcut per-migratetype free list checks for ALLOC_HARDER allocations, and return true as long as there's free page of any migratetype. The intention is that ALLOC_HARDER can allocate from MIGRATE_HIGHATOMIC free lists, while normal allocations can't. However, as a side effect, the watermark check will then also return true when there are pages only on the MIGRATE_ISOLATE list, or (prior to CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list. Since the allocation cannot actually obtain isolated pages, and might not be able to obtain CMA pages, this can result in a false positive. The condition should be rare and perhaps the outcome is not a fatal one. Still, it's better if the watermark check is correct. There also shouldn't be a performance tradeoff here. Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz Fixes: 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Martin Brandenburg authored
commit a0ec1ded upstream. In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by:
-
Martin Brandenburg authored
commit 0afc0dec upstream. set_op_state_purged can delete the op. Signed-off-by:
-
- 23 Jan, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Jonas Gorski authored
commit 0a5191ef upstream. Since commit aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Signed-off-by:
-
Yan Markman authored
commit e749aca8 upstream. Short fragmented packets may never be sent by the hardware when padding is disabled. This patch stop modifying the GMAC padding bits, to leave them to their reset value (disabled). Fixes: 3919357f ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by:
Yan Markman <ymarkman@marvell.com> [Antoine: commit message] Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 0d665e7b upstream. Tetsuo reported random crashes under memory pressure on 32-bit x86 system and tracked down to change that introduced page_vma_mapped_walk(). The root cause of the issue is the faulty pointer math in check_pte(). As ->pte may point to an arbitrary page we have to check that they are belong to the section before doing math. Otherwise it may lead to weird results. It wasn't noticed until now as mem_map[] is virtually contiguous on flatmem or vmemmap sparsemem. Pointer arithmetic just works against all 'struct page' pointers. But with classic sparsemem, it doesn't because each section memap is allocated separately and so consecutive pfns crossing two sections might have struct pages at completely unrelated addresses. Let's restructure code a bit and replace pointer arithmetic with operations on pfns. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by:
Michal Hocko <mhocko@suse.com> Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()") Signed-off-by:
-
Tom Lendacky authored
commit f23d74f6 upstream. Some issues have been reported with the for loop in stop_this_cpu() that issues the 'wbinvd; hlt' sequence. Reverting this sequence to halt() has been shown to resolve the issue. However, the wbinvd is needed when running with SME. The reason for the wbinvd is to prevent cache flush races between encrypted and non-encrypted entries that have the same physical address. This can occur when kexec'ing from memory encryption active to inactive or vice-versa. The important thing is to not have outside of kernel text memory references (such as stack usage), so the usage of the native_*() functions is needed since these expand as inline asm sequences. So instead of reverting the change, rework the sequence. Move the wbinvd instruction outside of the for loop as native_wbinvd() and make its execution conditional on X86_FEATURE_SME. In the for loop, change the asm 'wbinvd; hlt' sequence back to a halt sequence but use the native_halt() call. Fixes: bba4ed01 ("x86/mm, kexec: Allow kexec to be used with SME") Reported-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Andi Kleen authored
commit 3f7d8755 upstream. The generated assembler for the C fill RSB inline asm operations has several issues: - The C code sets up the loop register, which is then immediately overwritten in __FILL_RETURN_BUFFER with the same value again. - The C code also passes in the iteration count in another register, which is not used at all. Remove these two unnecessary operations. Just rely on the single constant passed to the macro for the iterations. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: dave.hansen@intel.com Cc: gregkh@linuxfoundation.org Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.orgSigned-off-by:
-
zhenwei.pi authored
commit 98f0fcee upstream. In section <2. Runtime Cost>, fix wrong index. Signed-off-by:
zhenwei.pi <zhenwei.pi@youruncloud.com> Signed-off-by:
-
Masami Hiramatsu authored
commit c86a32c0 upstream. Since indirect jump instructions will be replaced by jump to __x86_indirect_thunk_*, those jmp instruction must be treated as an indirect jump. Since optprobe prohibits to optimize probes in the function which uses an indirect jump, it also needs to find out the function which jump to __x86_indirect_thunk_* and disable optimization. Add a check that the jump target address is between the __indirect_thunk_start/end when optimizing kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit c1804a23 upstream. Mark __x86_indirect_thunk_* functions as blacklist for kprobes because those functions can be called from anywhere in the kernel including blacklist functions of kprobes. Signed-off-by:
-
