Add a document describing high-level system-wide suspend code flows
in Linux.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Debug messages from the system suspend/hibernation infrastructure
are disabled by default, and can only be enabled after the system
has boot up via /sys/power/pm_debug_messages.

This makes the hibernation resume hard to track as it involves system
boot up across hibernation.  There's no chance for software_resume()
to track the resume process, for example.

Add a kernel command line option to set pm_debug_messages during
boot up.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Alan Stern points out that the WARN_ON() check in device_prepare()
is racy (because the PM-runtime API can be disabled briefly for any
device at any time and system suspend can start at any time too) and
the pm_runtime_suspended() check in the computation of the
direct_complete flag value is redundant (because it will be
repeated later anyway).

Drop both these checks accordingly.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If hibernation_restore() fails, the 'error' should not be zero.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull PNP subsystem updates from Rafael Wysocki:

 - Update MAINTAINERS to cover include/linux/pnp.h and add the
   linux-acpi list to the PNP entry in it

 - add the const modifier to the name field definition in struct
   pnp_driver

 - drop a pointer case in the RTC CMOS driver that has become redundant

All by Corentin Labbe.

* tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: Add linux-acpi list to PNP
  rtc: cmos: remove useless cast for driver_name
  PNP: constify driver name
  PNP: add missing include/linux/pnp.h to MAINTAINERS

Pull ACPI updates from Rafael Wysocki:

   - Update the ACPICA code in the kernel to the 20200214 upstream
     release including:

       * Fix to re-enable the sleep button after wakeup (Anchal
         Agarwal).

       * Fixes for mistakes in comments and typos (Bob Moore).

       * ASL-ASL+ converter updates (Erik Kaneda).

       * Type casting cleanups (Sven Barth).

   - Clean up the intialization of the EC driver and eliminate some dead
     code from it (Rafael Wysocki).

   - Clean up the quirk tables in the AC and battery drivers (Hans de
     Goede).

   - Fix the global lock handling on x86 to ignore unspecified bit
     positions in the global lock field (Jan Engelhardt).

   - Add a new "tiny" driver for ACPI button devices exposed by VMs to
     guest kernels to send signals directly to init (Josh Triplett).

   - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).

   - Make the ACPI PCI host bridge and fan drivers use scnprintf() to
     avoid potential buffer overflows (Takashi Iwai).

   - Clean up assorted pieces of code:

       * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).

       * Drop unneeded variable initialization (Colin Ian King).

       * Add missing __acquires/__releases annotations (Jules Irenge).

       * Replace list_for_each_safe() with list_for_each_entry_safe()
         (chenqiwu)"

* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
  ACPICA: Update version to 20200214
  ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
  ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
  ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
  ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
  ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
  ACPI: EC: Consolidate event handler installation code
  acpi/x86: ignore unspecified bit positions in the ACPI global lock field
  acpi/x86: add a kernel parameter to disable ACPI BGRT
  x86/acpi: make "asmlinkage" part first thing in the function definition
  ACPI: list_for_each_safe() -> list_for_each_entry_safe()
  ACPI: video: remove redundant assignments to variable result
  ACPI: OSL: Add missing __acquires/__releases annotations
  ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
  ACPI / AC: Cleanup DMI quirk table
  ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
  ACPI: EC: Simplify acpi_ec_add()
  ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
  ACPI: EC: Avoid passing redundant argument to functions
  ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
  ...

Pull power management updates from Rafael Wysocki:
 "These clean up and rework the PM QoS API, address a suspend-to-idle
  wakeup regression on some ACPI-based platforms, clean up and extend a
  few cpuidle drivers, update multiple cpufreq drivers and cpufreq
  documentation, and fix a number of issues in devfreq and several other
  things all over.

  Specifics:

   - Clean up and rework the PM QoS API to simplify the code and reduce
     the size of it (Rafael Wysocki).

   - Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and
     similar platforms where the USB plug/unplug events are handled by
     the EC (Rafael Wysocki).

   - CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
     Ulf Hansson).

   - Extend the haltpoll cpuidle driver so that it can be forced to run
     on some systems where it refused to load (Maciej Szmigiero).

   - Convert several cpufreq documents to the .rst format and move the
     legacy driver documentation into one common file (Mauro Carvalho
     Chehab, Rafael Wysocki).

   - Update several cpufreq drivers:

        * Extend and fix the imx-cpufreq-dt driver (Anson Huang).

        * Improve the -EPROBE_DEFER handling and fix unwanted CPU
          overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
          Christoph Niedermaier).

        * Add support for Krait based SoCs to the qcom driver (Ansuel
          Smith).

        * Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).

        * Add platform specific intermediate callbacks support to
          cpufreq-dt and update the imx6q driver (Peng Fan).

        * Simplify and consolidate some pieces of the intel_pstate
          driver and update its documentation (Rafael Wysocki, Alex
          Hung).

   - Fix several devfreq issues:

        * Remove unneeded extern keyword from a devfreq header file and
          use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
          DEVFREQ_GOV_INTERNAL (Chanwoo Choi).

        * Fix the handling of dev_pm_qos_remove_request() result
          (Leonard Crestez).

        * Use constant name for userspace governor (Pierre Kuo).

        * Get rid of doc warnings and fix a typo (Christophe JAILLET).

   - Use built-in RCU list checking in some places in the PM core to
     avoid false-positive RCU usage warnings (Madhuparna Bhowmik).

   - Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM
     QoS routines (Qian Cai).

   - Fix removal of wakeup sources to avoid NULL pointer dereferences in
     a corner case (Neeraj Upadhyay).

   - Clean up the handling of hibernate compat ioctls and fix the
     related documentation (Eric Biggers).

   - Update the idle_inject power capping driver to use variable-length
     arrays instead of zero-length arrays (Gustavo Silva).

   - Fix list format in a PM QoS document (Randy Dunlap).

   - Make the cpufreq stats module use scnprintf() to avoid potential
     buffer overflows (Takashi Iwai).

   - Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).

   - Allow no domain-idle-states DT property in generic PM domains (Ulf
     Hansson).

   - Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
     Smythies)"

* tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits)
  cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
  tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
  ACPI: PM: s2idle: Refine active GPEs check
  ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
  PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
  PM / devfreq: Get rid of some doc warnings
  PM / devfreq: Fix handling dev_pm_qos_remove_request result
  PM / devfreq: Fix a typo in a comment
  PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
  PM / devfreq: Remove unneeded extern keyword
  PM / devfreq: Use constant name of userspace governor
  ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
  cpufreq: qcom: Add support for krait based socs
  cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
  cpufreq: Use scnprintf() for avoiding potential buffer overflow
  cpuidle: psci: Split psci_dt_cpu_init_idle()
  PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
  PM / hibernate: Remove unnecessary compat ioctl overrides
  PM: hibernate: fix docs for ioctls that return loff_t via pointer
  Documentation: intel_pstate: update links for references
  ...

Pull spi and regulator updates from Mark Brown:
 "At one point in the release cycle I managed to fat finger things and
  apply some SPI fixes onto a regulator branch and merge that into the
  SPI tree, then pull in a change shared with the MTD tree moving the
  Mediatek quadspi driver over to become the Mediatek spi-nor driver in
  the SPI tree.

  This has made a mess which I only just noticed while preparing this
  and I can't see a sensible way to unpick things due to other
  subsequent merge commits especially the pull from MTD so it looks like
  the most sensible thing to do is give up and combine the two pull
  requests.

  Fortunately both subsystems were fairly quiet this cycle, the
  highlights are:

  regulator:

   - Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869
     and Qualcomm PMI8994 and SMB208.

  SPI:

   - Lots of enhancements for spi-fsl-dspi, including XSPI mode support,
     from Vladimir Oltean.

   - Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved
     from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and
     Qualcomm Atheros AR934x/QCA95xx"

* tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits)
  spi: efm32: Convert to use GPIO descriptors
  regulator: qcom_smd: Add pmi8994 regulator support
  regulator: da9063: Fix get_mode() functions to read sleep field
  spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member
  spi: spi-s3c24xx: Replace zero-length array with flexible-array member
  spi: stm32: Fix comments compilation warnings
  spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses
  spi: spi-fsl-dspi: Add support for LS1028A
  spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message
  spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path
  spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode
  spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
  spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
  spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode
  spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode
  spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA
  spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR
  regulator: driver.h: fix regulator_map_* function names
  regulator: da9063: fix suspend
  spi: mxs: Drop GPIO includes
  ...

Pull regma: update from Mark Brown:
 "Only one small documentation fix for regmap this time around"

* tag 'regmap-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: wrong descriptions in regmap_range_cfg

Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.7-rc1.

  We again end up deleting more code than we added here, thanks to
  finally getting rid of the old and obsolete wireless USB stuff, and
  the exfat code (which is coming in again through the vfs tree in a
  much cleaner version).

  But some code does come back, with the octeon drivers being found to
  actually be used in the wild, so those deletions are now reverted.

  Other than those major things, just loads and loads of tiny checkpatch
  cleanups all over the place, along with new IIO drivers and fixes.

  All have been in linux-next with no reported issues"

[ Stephen Rothwell points out some reported issues due to merge conflicts ]

* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
  staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
  staging: remove hp100 driver
  staging: wilc1000: Use crc7 in lib/ rather than a private copy
  Staging: rtl8192u: ieee80211: Use netdev_alert().
  Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
  Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
  Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
  staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
  staging: rtl8723bs: hal: Remove NULL check before kfree
  staging: rtl8723bs: hal: Correct typos in comments
  staging: rtl8723bs: os_dep: Correct typos in comments
  staging: rtl8723bs: core: Correct typos in comments
  staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
  staging: rtl8188eu: cleanup long line in odm.c
  staging: rtl8723bs: hal: Compress return logic
  staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
  staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
  staging: wilc1000: remove label from examples in DT binding documentation
  staging: rtl8723bs: Remove blank line before '}' brace
  Staging: rtl8188eu: hal: Add space around operators
  ...

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.7-rc1.

  Nothing huge in here, just lots of little firmware core changes and
  use of new apis, a libfs fix, a debugfs api change, and some driver
  core deferred probe rework.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
  Revert "driver core: Set fw_devlink to "permissive" behavior by default"
  driver core: Set fw_devlink to "permissive" behavior by default
  driver core: Replace open-coded list_last_entry()
  driver core: Read atomic counter once in driver_probe_done()
  libfs: fix infoleak in simple_attr_read()
  driver core: Add device links from fwnode only for the primary device
  platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  Input: silead - Switch to firmware_request_platform for retreiving the fw
  selftests: firmware: Add firmware_request_platform tests
  test_firmware: add support for firmware_request_platform
  firmware: Add new platform fallback mechanism and firmware_request_platform()
  Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
  drivers: base: power: wakeup.c: Use built-in RCU list checking
  component: allow missing unbind callback
  debugfs: remove return value of debugfs_create_file_size()
  debugfs: Check module state before warning in {full/open}_proxy_open()
  firmware: fix a double abort case with fw_load_sysfs_fallback
  arch_topology: Fix putting invalid cpu clk
  ...

Pull USB / PHY updates from Greg KH:
 "Here are the big set of USB and PHY driver patches for 5.7-rc1.

  Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
  updates, xhci updates, usb-serial driver updates and new device ids,
  and other minor things. Full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
  USB: cdc-acm: restore capability check order
  usb: cdns3: make signed 1 bit bitfields unsigned
  usb: gadget: fsl: remove unused variable 'driver_desc'
  usb: gadget: f_fs: Fix use after free issue as part of queue failure
  usb: typec: Correct the documentation for typec_cable_put()
  USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
  USB: serial: option: add Wistron Neweb D19Q1
  USB: serial: option: add BroadMobi BM806U
  USB: serial: option: add support for ASKEY WWHC050
  usb: core: Add ACPI support for USB interface devices
  driver core: platform: Reimplement devm_platform_ioremap_resource
  usb: dwc2: convert to devm_platform_get_and_ioremap_resource
  usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
  usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
  drivers: provide devm_platform_get_and_ioremap_resource()
  phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
  phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
  dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
  phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
  dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: imx219

 - Support for some new pixelformats

 - Support for Sun8i SoC

 - Added more codecs to meson vdec driver

 - Prepare for removing the legacy usbvision driver by moving it to
   staging. This driver has issues and use legacy core APIs. If nobody
   steps up to address those, it is time for its retirement.

 - Several cleanups and improvements on drivers, with the addition of
   new supported boards

* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
  media: venus: firmware: Ignore secure call error on first resume
  media: mtk-vpu: load vpu firmware from the new location
  media: i2c: video-i2c: fix build errors due to 'imply hwmon'
  media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
  media: hantro: add initial i.MX8MQ support
  media: dt-bindings: Document i.MX8MQ VPU bindings
  media: vivid: fix incorrect PA assignment to HDMI outputs
  media: hantro: Add linux-rockchip mailing list to MAINTAINERS
  media: cedrus: h264: Fix 4K decoding on H6
  media: siano: Use scnprintf() for avoiding potential buffer overflow
  media: rc: Use scnprintf() for avoiding potential buffer overflow
  media: allegro: create new struct for channel parameters
  media: allegro: move mail definitions to separate file
  media: allegro: pass buffers through firmware
  media: allegro: verify source and destination buffer in VCU response
  media: allegro: handle dependency of bitrate and bitrate_peak
  media: allegro: read bitrate mode directly from control
  media: allegro: make QP configurable
  media: allegro: make frame rate configurable
  media: allegro: skip filler data if possible
  ...

Pull hwmon updates from Guenter Roeck:

 - New driver for AXI fan control

 - Attenuator bypass support and support for inverting pwm output in
   adt7475 driver

 - Support for new power supply version in ibm-cffps driver

 - PMBus drivers:

     * support for multi-phase chips

     * ltc2978 driver: add support for LTC2972, LTC2979, LTC3884,
       LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and
       LTM4700/

     * tps53679 driver: add support for TPS53681, TPS53647, and TPS53667

     * isl68137 driver: support for various 2nd Gen Renesas digital
       multiphase chips added to isl68137 driver

 - Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem,
   and k10temp drivers

* tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits)
  docs: hwmon: Update documentation for isl68137 pmbus driver
  hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase
  hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
  hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes
  hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow
  hwmon: (adt7475) Add support for inverting pwm output
  hwmon: (adt7475) Add attenuator bypass support
  dt-bindings: hwmon: Document adt7475 pwm-active-state property
  dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  dt-bindings: hwmon: Document adt7475 binding
  hwmon: (lm73) Add support for of_match_table
  dt-bindings: Add TI LM73 as a trivial device
  hwmon: (pmbus/tps53679) Add documentation
  hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
  hwmon: (pmbus/tps53679) Add support for TPS53681
  hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
  hwmon: (pmbus/tps53679) Add support for multiple chips IDs
  hwmon: (pmbus) Implement multi-phase support
  hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support
  hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions
  ...

Pull RAS updates from Borislav Petkov:

 - Do not report spurious MCEs on some Intel platforms caused by errata;
   by Prarit Bhargava.

 - Change dev-mcelog's hardcoded limit of 32 error records to a dynamic
   one, controlled by the number of logical CPUs, by Tony Luck.

 - Add support for the processor identification number (PPIN) on AMD, by
   Wei Huang.

* tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/amd: Add PPIN support for AMD MCE
  x86/mce/dev-mcelog: Dynamically allocate space for machine check records
  x86/mce: Do not log spurious corrected mce errors

Pull EDAC updates from Borislav Petkov:

 - A substantial edac_mc cleanup, sanitizing object freeing,
   streamlining and simplifying code flow, and getting rid of a lot of
   needless complexity in memory controller representation code, by
   Robert Richter.

 - A new EDAC driver for the ARM DMC-520 memory controller, by Lei Wang,
   Shiping Ji and others.

 - The usual sprinkling of misc cleanups and fixes all over the
   subsystem.

* tag 'edac_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/armada_xp: Use scnprintf() for avoiding potential buffer overflow
  EDAC/synopsys: Do not dump uninitialized pinf->col
  EDAC: Add EDAC driver for DMC520
  dt-bindings: edac: Dmc-520.yaml
  EDAC/mce_amd: Print !SMCA processor warning only once
  EDAC/mc: Remove per layer counters
  EDAC/mc: Remove detail[] string and cleanup error string generation
  EDAC/mc: Pass the error descriptor to error reporting functions
  EDAC/mc: Remove enable_per_layer_report function argument
  EDAC/mc: Report "unknown memory" on too many DIMM labels found
  EDAC/mc: Carve out error increment into a separate function
  EDAC/mc: Determine mci pointer from the error descriptor
  EDAC: Store error type in struct edac_raw_error_desc
  EDAC/mc: Reorder functions edac_mc_alloc*()
  EDAC/mc: Split edac_mc_alloc() into smaller functions
  EDAC/mc: Change mci device removal to use put_device()

Pull pstore updates from Kees Cook:
 "These mostly some minor cleanups and a bug fix for an ftrace corner
  case:

   - Improve failure paths (chenqiwu)

   - Fix ftrace position index (Vasily Averin)

   - Use proper flexible-array member (Gustavo A. R. Silva)"

* tag 'pstore-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Replace zero-length array with flexible-array member
  pstore: pstore_ftrace_seq_next should increase position index
  pstore/ram: remove unnecessary ramoops_unregister_dummy()
  pstore/platform: fix potential mem leak if pstore_init_fs failed

Pull seccomp updates from Kees Cook:
 "A couple of seccomp updates. They're both mostly bug fixes that I
  wanted to have sit in linux-next for a while:

   - allow TSYNC and USER_NOTIF together (Tycho Andersen)

   - add missing compat_ioctl for notify (Sven Schnelle)"

* tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Add missing compat_ioctl for notify
  seccomp: allow TSYNC and USER_NOTIF together

Pull erofs updates from Gao Xiang:
 "Updates with a XArray adaptation, several fixes for shrinker and
  corrupted images are ready for this cycle.

  All commits have been stress tested with no noticeable smoke out and
  have been in linux-next as well.

  Summary:

   - Convert radix tree usage to XArray

   - Fix shrink scan count on multiple filesystem instances

   - Better handling for specific corrupted images

   - Update my email address in MAINTAINERS"

* tag 'erofs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  MAINTAINERS: erofs: update my email address
  erofs: handle corrupted images whose decompressed size less than it'd be
  erofs: use LZ4_decompress_safe() for full decoding
  erofs: correct the remaining shrink objects
  erofs: convert workstn to XArray

Pull documentation updates from Jonathan Corbet:
 "This has been a busy cycle for documentation work.

  Highlights include:

   - Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
     Maybe someday we'll get to the end of this stuff...maybe...

   - Some organizational work to bring some order to the core-api
     manual.

   - Various new docs and additions to the existing documentation.

   - Typo fixes, warning fixes, ..."

* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
  Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
  MAINTAINERS: adjust to filesystem doc ReST conversion
  docs: deprecated.rst: Add BUG()-family
  doc: zh_CN: add translation for virtiofs
  doc: zh_CN: index files in filesystems subdirectory
  docs: locking: Drop :c:func: throughout
  docs: locking: Add 'need' to hardirq section
  docs: conf.py: avoid thousands of duplicate label warning on Sphinx
  docs: prevent warnings due to autosectionlabel
  docs: fix reference to core-api/namespaces.rst
  docs: fix pointers to io-mapping.rst and io_ordering.rst files
  Documentation: Better document the softlockup_panic sysctl
  docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
  docs: perf: imx-ddr.rst: get rid of a warning
  docs: filesystems: fuse.rst: supress a Sphinx warning
  docs: translations: it: avoid duplicate refs at programming-language.rst
  docs: driver.rst: supress two ReSt warnings
  docs: trace: events.rst: convert some new stuff to ReST format
  Documentation: Add io_ordering.rst to driver-api manual
  Documentation: Add io-mapping.rst to driver-api manual
  ...

Pull io_uring updates from Jens Axboe:
 "Here are the io_uring changes for this merge window. Light on new
  features this time around (just splice + buffer selection), lots of
  cleanups, fixes, and improvements to existing support. In particular,
  this contains:

   - Cleanup fixed file update handling for stack fallback (Hillf)

   - Re-work of how pollable async IO is handled, we no longer require
     thread offload to handle that. Instead we rely using poll to drive
     this, with task_work execution.

   - In conjunction with the above, allow expendable buffer selection,
     so that poll+recv (for example) no longer has to be a split
     operation.

   - Make sure we honor RLIMIT_FSIZE for buffered writes

   - Add support for splice (Pavel)

   - Linked work inheritance fixes and optimizations (Pavel)

   - Async work fixes and cleanups (Pavel)

   - Improve io-wq locking (Pavel)

   - Hashed link write improvements (Pavel)

   - SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"

* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
  io_uring: cleanup io_alloc_async_ctx()
  io_uring: fix missing 'return' in comment
  io-wq: handle hashed writes in chains
  io-uring: drop 'free_pfile' in struct io_file_put
  io-uring: drop completion when removing file
  io_uring: Fix ->data corruption on re-enqueue
  io-wq: close cancel gap for hashed linked work
  io_uring: make spdxcheck.py happy
  io_uring: honor original task RLIMIT_FSIZE
  io-wq: hash dependent work
  io-wq: split hashing and enqueueing
  io-wq: don't resched if there is no work
  io-wq: remove duplicated cancel code
  io_uring: fix truncated async read/readv and write/writev retry
  io_uring: dual license io_uring.h uapi header
  io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
  io_uring: Fix unused function warnings
  io_uring: add end-of-bits marker and build time verify it
  io_uring: provide means of removing buffers
  io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
  ...

Pull block driver updates from Jens Axboe:

 - floppy driver cleanup series from Willy

 - NVMe updates and fixes (Various)

 - null_blk trace improvements (Chaitanya)

 - bcache fixes (Coly)

 - md fixes (via Song)

 - loop block size change optimizations (Martijn)

 - scnprintf() use (Takashi)

* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
  null_blk: add trace in null_blk_zoned.c
  null_blk: add tracepoint helpers for zoned mode
  block: add a zone condition debug helper
  nvme: cleanup namespace identifier reporting in nvme_init_ns_head
  nvme: rename __nvme_find_ns_head to nvme_find_ns_head
  nvme: refactor nvme_identify_ns_descs error handling
  nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
  nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
  nvme: Fix controller creation races with teardown flow
  nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
  nvme: Fix ctrl use-after-free during sysfs deletion
  nvme-pci: Re-order nvme_pci_free_ctrl
  nvme: Remove unused return code from nvme_delete_ctrl_sync
  nvme: Use nvme_state_terminal helper
  nvme: release ida resources
  nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
  nvmet-tcp: optimize tcp stack TX when data digest is used
  nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
  nvme-multipath: do not reset on unknown status
  nvmet-rdma: allocate RW ctxs according to mdts
  ...

Pull block updates from Jens Axboe:

 - Online capacity resizing (Balbir)

 - Number of hardware queue change fixes (Bart)

 - null_blk fault injection addition (Bart)

 - Cleanup of queue allocation, unifying the node/no-node API
   (Christoph)

 - Cleanup of genhd, moving code to where it makes sense (Christoph)

 - Cleanup of the partition handling code (Christoph)

 - disk stat fixes/improvements (Konstantin)

 - BFQ improvements (Paolo)

 - Various fixes and improvements

* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
  block: return NULL in blk_alloc_queue() on error
  block: move bio_map_* to blk-map.c
  Revert "blkdev: check for valid request queue before issuing flush"
  block: simplify queue allocation
  bcache: pass the make_request methods to blk_queue_make_request
  null_blk: use blk_mq_init_queue_data
  block: add a blk_mq_init_queue_data helper
  block: move the ->devnode callback to struct block_device_operations
  block: move the part_stat* helpers from genhd.h to a new header
  block: move block layer internals out of include/linux/genhd.h
  block: move guard_bio_eod to bio.c
  block: unexport get_gendisk
  block: unexport disk_map_sector_rcu
  block: unexport disk_get_part
  block: mark part_in_flight and part_in_flight_rw static
  block: mark block_depr static
  block: factor out requeue handling from dispatch code
  block/diskstats: replace time_in_queue with sum of request times
  block/diskstats: accumulate all per-cpu counters in one pass
  block/diskstats: more accurate approximation of io_ticks for slow disks
  ...

Pull libata updates from Jens Axboe:

 - Series from Bart, making the libata code smaller on PATA only setups.
   This is useful for smaller/embedded use cases, and will help us move
   some of those off drivers/ide.

 - Kill unused BPRINTK() (Hannes)

 - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika)

 - Fix for a double scsi_host_put() in error handling (John)

 - Use scnprintf (Takashi)

 - Assign OF node to the SCSI device (Linus Walleij)

* tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits)
  ata: make "libata.force" kernel parameter optional
  ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
  ata: start separating SATA specific code from libata-eh.c
  ata: move ata_sas_*() to libata-sata.c
  ata: start separating SATA specific code from libata-scsi.c
  ata: move sata_deb_timing_*() to libata-sata.c
  ata: move ata_qc_complete_multiple() to libata-sata.c
  ata: move sata_link_hardreset() to libata-sata.c
  ata: move sata_link_{debounce,resume}() to libata-sata.c
  ata: move *sata_set_spd*() to libata-sata.c
  ata: move sata_scr_*() to libata-sata.c
  ata: start separating SATA specific code from libata-core.c
  ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
  ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts
  ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()
  ata: separate PATA timings code from libata-core.c
  ata: fix CodingStyle issues in PATA timings code
  ata: remove EXPORT_SYMBOL_GPL()s not used by modules
  ata: move EXPORT_SYMBOL_GPL()s close to exported code
  ata: optimize ata_scsi_rbuf[] size
  ...

Pull i3c updates from Boris Brezillon:

 - Fix driver auto-probing related issues

 - Stop using the deprecated i2c_new_device() function

 - Replace zero-length array with flexible-array member

* tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: convert to use i2c_new_client_device()
  i3c: master: Replace zero-length array with flexible-array member
  i3c: Simplify i3c_device_match_id()
  i3c: Generate aliases for i3c modules
  i3c: Add a modalias sysfs attribute
  i3c: Fix MODALIAS uevents
  i3c: master: no need to iterate master device twice

Pull tpm updates from Jarkko Sakkinen:
 "tpmdd updates for Linux v5.7"

* tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd:
  KEYS: reaching the keys quotas correctly
  tpm: ibmvtpm: Add support for TPM2
  tpm: ibmvtpm: Wait for buffer to be set before proceeding
  tpm: of: Handle IBM,vtpm20 case when getting log parameters
  MAINTAINERS: adjust to trusted keys subsystem creation
  tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays
  tpm_tis_spi: use new 'delay' structure for SPI transfer delays
  tpm: tpm2_bios_measurements_next should increase position index
  tpm: tpm1_bios_measurements_next should increase position index
  tpm: Don't make log failures fatal

* acpi-ec:
  ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
  ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
  ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
  ACPI: EC: Consolidate event handler installation code
  ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
  ACPI: EC: Simplify acpi_ec_add()
  ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
  ACPI: EC: Avoid passing redundant argument to functions
  ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()

* acpi-fan:
  ACPI: fan: Use scnprintf() for avoiding potential buffer overflow

* acpi-pci:
  ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow

* acpi-button:
  ACPI: Add new tiny-power-button driver to directly signal init
  ACPI: button: move HIDs to acpi/button.h

* acpi-battery:
  ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
  ACPI / AC: Cleanup DMI quirk table

* acpi-osl:
  ACPI: OSL: Add missing __acquires/__releases annotations

* acpi-video:
  ACPI: video: remove redundant assignments to variable result

* acpi-misc:
  ACPI: list_for_each_safe() -> list_for_each_entry_safe()

* acpica:
  ACPICA: Update version to 20200214
  ACPICA: Fix a couple of typos
  ACPICA: use acpi_size instead of u32 for prefix_path_length
  ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32
  ACPICA: cast the result of the pointer difference to u32
  ACPICA: Table Manager: Update comments in a function header
  ACPICA: Enable sleep button on ACPI legacy wake
  ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events.
  ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree
  ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()

ACPICA commit ac0c1b8a43a317702bb11e11fd5067a1c59e3002

Version 20200214

Link: https://github.com/acpica/acpica/commit/ac0c1b8aSigned-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-devfreq:
  PM / devfreq: Get rid of some doc warnings
  PM / devfreq: Fix handling dev_pm_qos_remove_request result
  PM / devfreq: Fix a typo in a comment
  PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
  PM / devfreq: Remove unneeded extern keyword
  PM / devfreq: Use constant name of userspace governor

* powercap:
  powercap: idle_inject: Replace zero-length array with flexible-array member

* pm-docs:
  docs: cpu-freq: convert cpufreq-stats.txt to ReST
  docs: cpu-freq: convert cpu-drivers.txt to ReST
  docs: cpu-freq: convert core.txt to ReST
  docs: cpu-freq: convert index.txt to ReST
  docs: cpufreq: fix a broken reference
  Documentation: cpufreq: Move legacy driver documentation

* pm-core:
  PM: runtime: Add pm_runtime_get_if_active()

* pm-sleep:
  PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
  PM / hibernate: Remove unnecessary compat ioctl overrides
  PM: hibernate: fix docs for ioctls that return loff_t via pointer
  PM: sleep: wakeup: Use built-in RCU list checking
  PM: sleep: core: Use built-in RCU list checking

* pm-acpi:
  ACPI: PM: s2idle: Refine active GPEs check
  ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
  ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()

* pm-domains:
  cpuidle: psci: Split psci_dt_cpu_init_idle()
  PM / Domains: Allow no domain-idle-states DT property in genpd when parsing

* pm-cpufreq:
  cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
  cpufreq: qcom: Add support for krait based socs
  cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
  cpufreq: Use scnprintf() for avoiding potential buffer overflow
  Documentation: intel_pstate: update links for references
  cpufreq: intel_pstate: Consolidate policy verification
  cpufreq: dt: Allow platform specific intermediate callbacks
  cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
  cpufreq: imx6q: read OCOTP through nvmem for imx6q
  cpufreq: imx6q: fix error handling
  cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
  cpufreq: ti-cpufreq: Add support for OPP_PLUS
  cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

* pm-cpuidle:
  cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
  intel_idle: Update copyright notice, known limitations and version
  intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16)
  intel_idle: Clean up kerneldoc comments for multiple functions
  intel_idle: Reorder declarations of static variables
  intel_idle: Annotate init time data structures
  intel_idle: Add __initdata annotations to init time variables
  intel_idle: Relocate definitions of cpuidle callbacks
  intel_idle: Clean up definitions of cpuidle callbacks
  intel_idle: Simplify LAPIC timer reliability checks

* pm-qos: (30 commits)
  PM: QoS: annotate data races in pm_qos_*_value()
  Documentation: power: fix pm_qos_interface.rst format warning
  PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE
  Documentation: PM: QoS: Update to reflect previous code changes
  PM: QoS: Update file information comments
  PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions
  sound: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*()
  drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*()
  x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()
  cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request()
  PM: QoS: Add CPU latency QoS API wrappers
  PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h
  PM: QoS: Simplify definitions of CPU latency QoS trace events
  ...

With the latest cleanup in qcom scm driver the secure monitor
call for setting the remote processor state returns EINVAL when
it is called for the first time and after another scm call
auth_and_reset. The error returned from scm call could be ignored
because the state transition is already done in auth_and_reset.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Merge branches 'edac-mc-cleanup', 'edac-misc', 'edac-drivers' and 'edac-urgent' into edac-updates-for-5.7
Signed-off-by: Borislav Petkov <bp@suse.de>

Executing the seccomp_bpf testsuite under a 64-bit kernel with 32-bit
userland (both s390 and x86) doesn't work because there's no compat_ioctl
handler defined. Add the handler.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 6a21cc50 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200310123332.42255-1-svens@linux.ibm.comSigned-off-by: Kees Cook <keescook@chromium.org>