Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.

Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.

Fixes: 214baf22 ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Ensure the scheduling element type and TSAR type are explicitly
initialized in the QoS rate group creation.

This prevents potential issues due to default values.

Fixes: 1ae258f8 ("net/mlx5: E-switch, Introduce rate limiting groups API")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes
in ptys2ext_ethtool_table, since it was missing.

Fixes: 6a897372 ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.

Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add the upcoming ConnectX-9 device ID to the table of supported
PCI device IDs.

Fixes: f908a35b ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

syzbot found a new splat [1].

Instead of adding yet another spin_lock_bh(&hsr->seqnr_lock) /
spin_unlock_bh(&hsr->seqnr_lock) pair, remove seqnr_lock
and use atomic_t for hsr->sequence_nr and hsr->sup_sequence_nr.

This also avoid a race in hsr_fill_info().

Also remove interlink_sequence_nr which is unused.

[1]
 WARNING: CPU: 1 PID: 9723 at net/hsr/hsr_forward.c:602 handle_std_frame+0x247/0x2c0 net/hsr/hsr_forward.c:602
Modules linked in:
CPU: 1 UID: 0 PID: 9723 Comm: syz.0.1657 Not tainted 6.11.0-rc6-syzkaller-00026-g88fac175 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
 RIP: 0010:handle_std_frame+0x247/0x2c0 net/hsr/hsr_forward.c:602
Code: 49 8d bd b0 01 00 00 be ff ff ff ff e8 e2 58 25 00 31 ff 89 c5 89 c6 e8 47 53 a8 f6 85 ed 0f 85 5a ff ff ff e8 fa 50 a8 f6 90 <0f> 0b 90 e9 4c ff ff ff e8 cc e7 06 f7 e9 8f fe ff ff e8 52 e8 06
RSP: 0018:ffffc90000598598 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffc90000598670 RCX: ffffffff8ae2c919
RDX: ffff888024e94880 RSI: ffffffff8ae2c926 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff8880627a8cc0 R14: 0000000000000000 R15: ffff888012b03c3a
FS:  0000000000000000(0000) GS:ffff88802b700000(0063) knlGS:00000000f5696b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000020010000 CR3: 00000000768b4000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
  hsr_fill_frame_info+0x2c8/0x360 net/hsr/hsr_forward.c:630
  fill_frame_info net/hsr/hsr_forward.c:700 [inline]
  hsr_forward_skb+0x7df/0x25c0 net/hsr/hsr_forward.c:715
  hsr_handle_frame+0x603/0x850 net/hsr/hsr_slave.c:70
  __netif_receive_skb_core.constprop.0+0xa3d/0x4330 net/core/dev.c:5555
  __netif_receive_skb_list_core+0x357/0x950 net/core/dev.c:5737
  __netif_receive_skb_list net/core/dev.c:5804 [inline]
  netif_receive_skb_list_internal+0x753/0xda0 net/core/dev.c:5896
  gro_normal_list include/net/gro.h:515 [inline]
  gro_normal_list include/net/gro.h:511 [inline]
  napi_complete_done+0x23f/0x9a0 net/core/dev.c:6247
  gro_cell_poll+0x162/0x210 net/core/gro_cells.c:66
  __napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6772
  napi_poll net/core/dev.c:6841 [inline]
  net_rx_action+0xa92/0x1010 net/core/dev.c:6963
  handle_softirqs+0x216/0x8f0 kernel/softirq.c:554
  do_softirq kernel/softirq.c:455 [inline]
  do_softirq+0xb2/0xf0 kernel/softirq.c:442
 </IRQ>
 <TASK>

Fixes: 06afd2c3 ("hsr: Synchronize sending frames to have always incremented outgoing seq nr.")
Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, bluetooth and wireless.

  No known regressions at this point. Another calm week, but chances are
  that has more to do with vacation season than the quality of our work.

  Current release - new code bugs:

   - smc: prevent NULL pointer dereference in txopt_get

   - eth: ti: am65-cpsw: number of XDP-related fixes

  Previous releases - regressions:

   - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
     BREDR/LE", it breaks existing user space

   - Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
     later problems with suspend

   - can: mcp251x: fix deadlock if an interrupt occurs during
     mcp251x_open

   - eth: r8152: fix the firmware communication error due to use of bulk
     write

   - ptp: ocp: fix serial port information export

   - eth: igb: fix not clearing TimeSync interrupts for 82580

   - Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo

  Previous releases - always broken:

   - eth: intel: fix crashes and bugs when reconfiguration and resets
     happening in parallel

   - wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()

  Misc:

   - docs: netdev: document guidance on cleanup.h"

* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  ila: call nf_unregister_net_hooks() sooner
  tools/net/ynl: fix cli.py --subscribe feature
  MAINTAINERS: fix ptp ocp driver maintainers address
  selftests: net: enable bind tests
  net: dsa: vsc73xx: fix possible subblocks range of CAPT block
  sched: sch_cake: fix bulk flow accounting logic for host fairness
  docs: netdev: document guidance on cleanup.h
  net: xilinx: axienet: Fix race in axienet_stop
  net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
  r8152: fix the firmware doesn't work
  fou: Fix null-ptr-deref in GRO.
  bareudp: Fix device stats updates.
  net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
  bpf, net: Fix a potential race in do_sock_getsockopt()
  net: dqs: Do not use extern for unused dql_group
  sch/netem: fix use after free in netem_dequeue
  usbnet: modern method to get random MAC
  MAINTAINERS: wifi: cw1200: add net-cw1200.h
  ice: do not bring the VSI up, if it was down before the XDP setup
  ice: remove ICE_CFG_BUSY locking from AF_XDP code
  ...

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes (including some of the widespread
  work on fixing missing ID tables for module autoloading and the revert
  of some problematic PM work in spi-rockchip), some improvements to the
  MAINTAINERS information for the NXP drivers and the addition of a new
  device ID to spidev"

* tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers
  MAINTAINERS: SPI: Add freescale lpspi maintainer information
  spi: spi-fsl-lpspi: Fix off-by-one in prescale max
  spi: spidev: Add missing spi_device_id for jg10309-01
  spi: bcm63xx: Enable module autoloading
  spi: intel: Add check devm_kasprintf() returned value
  spi: spidev: Add an entry for elgin,jg10309-01
  spi: rockchip: Resolve unbalanced runtime PM / system PM handling

Merge tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix from Doug Anderson for a missing stub, required to fix the build
  for some newly added users of devm_regulator_bulk_get_const() in
  !REGULATOR configurations"

* tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR

Pull Rust fixes from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Fix builds for nightly compiler users now that 'new_uninit' was
     split into new features by using an alternative approach for the
     code that used what is now called the 'box_uninit_write' feature

   - Allow the 'stable_features' lint to preempt upcoming warnings about
     them, since soon there will be unstable features that will become
     stable in nightly compilers

   - Export bss symbols too

  'kernel' crate:

   - 'block' module: fix wrong usage of lockdep API

  'macros' crate:

   - Provide correct provenance when constructing 'THIS_MODULE'

  Documentation:

   - Remove unintended indentation (blockquotes) in generated output

   - Fix a couple typos

  MAINTAINERS:

   - Remove Wedson as Rust maintainer

   - Update Andreas' email"

* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
  MAINTAINERS: update Andreas Hindborg's email address
  MAINTAINERS: Remove Wedson as Rust maintainer
  rust: macros: provide correct provenance when constructing THIS_MODULE
  rust: allow `stable_features` lint
  docs: rust: remove unintended blockquote in Quick Start
  rust: alloc: eschew `Box<MaybeUninit<T>>::write`
  rust: kernel: fix typos in code comments
  docs: rust: remove unintended blockquote in Coding Guidelines
  rust: block: fix wrong usage of lockdep API
  rust: kbuild: fix export of bss symbols

Pull tracing fixes from Steven Rostedt:

 - Fix adding a new fgraph callback after function graph tracing has
   already started.

   If the new caller does not initialize its hash before registering the
   fgraph_ops, it can cause a NULL pointer dereference. Fix this by
   adding a new parameter to ftrace_graph_enable_direct() passing in the
   newly added gops directly and not rely on using the fgraph_array[],
   as entries in the fgraph_array[] must be initialized.

   Assign the new gops to the fgraph_array[] after it goes through
   ftrace_startup_subops() as that will properly initialize the
   gops->ops and initialize its hashes.

 - Fix a memory leak in fgraph storage memory test.

   If the "multiple fgraph storage on a function" boot up selftest fails
   in the registering of the function graph tracer, it will not free the
   memory it allocated for the filter. Break the loop up into two where
   it allocates the filters first and then registers the functions where
   any errors will do the appropriate clean ups.

 - Only clear the timerlat timers if it has an associated kthread.

   In the rtla tool that uses timerlat, if it was killed just as it was
   shutting down, the signals can free the kthread and the timer. But
   the closing of the timerlat files could cause the hrtimer_cancel() to
   be called on the already freed timer. As the kthread variable is is
   set to NULL when the kthreads are stopped and the timers are freed it
   can be used to know not to call hrtimer_cancel() on the timer if the
   kthread variable is NULL.

 - Use a cpumask to keep track of osnoise/timerlat kthreads

   The timerlat tracer can use user space threads for its analysis. With
   the killing of the rtla tool, the kernel can get confused between if
   it is using a user space thread to analyze or one of its own kernel
   threads. When this confusion happens, kthread_stop() can be called on
   a user space thread and bad things happen. As the kernel threads are
   per-cpu, a bitmask can be used to know when a kernel thread is used
   or when a user space thread is used.

 - Add missing interface_lock to osnoise/timerlat stop_kthread()

   The stop_kthread() function in osnoise/timerlat clears the osnoise
   kthread variable, and if it was a user space thread does a put_task
   on it. But this can race with the closing of the timerlat files that
   also does a put_task on the kthread, and if the race happens the task
   will have put_task called on it twice and oops.

 - Add cond_resched() to the tracing_iter_reset() loop.

   The latency tracers keep writing to the ring buffer without resetting
   when it issues a new "start" event (like interrupts being disabled).
   When reading the buffer with an iterator, the tracing_iter_reset()
   sets its pointer to that start event by walking through all the
   events in the buffer until it gets to the time stamp of the start
   event. In the case of a very large buffer, the loop that looks for
   the start event has been reported taking a very long time with a non
   preempt kernel that it can trigger a soft lock up warning. Add a
   cond_resched() into that loop to make sure that doesn't happen.

 - Use list_del_rcu() for eventfs ei->list variable

   It was reported that running loops of creating and deleting kprobe
   events could cause a crash due to the eventfs list iteration hitting
   a LIST_POISON variable. This is because the list is protected by SRCU
   but when an item is deleted from the list, it was using list_del()
   which poisons the "next" pointer. This is what list_del_rcu() was to
   prevent.

* tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
  tracing/timerlat: Only clear timer if a kthread exists
  tracing/osnoise: Use a cpumask to know what threads are kthreads
  eventfs: Use list_del_rcu() for SRCU protected list variable
  tracing: Avoid possible softlockup in tracing_iter_reset()
  tracing: Fix memory leak in fgraph storage selftest
  tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()

syzbot found an use-after-free Read in ila_nf_input [1]

Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().

It should be done in the reverse way, with a synchronize_rcu().

This is a good match for a pre_exit() method.

[1]
 BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16

CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
  __netif_receive_skb_one_core net/core/dev.c:5661 [inline]
  __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
  process_backlog+0x662/0x15b0 net/core/dev.c:6108
  __napi_poll+0xcb/0x490 net/core/dev.c:6772
  napi_poll net/core/dev.c:6841 [inline]
  net_rx_action+0x89b/0x1240 net/core/dev.c:6963
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
  smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
  prep_new_page mm/page_alloc.c:1501 [inline]
  get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
  __alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
  ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
  __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
  __do_kmalloc_node mm/slub.c:4146 [inline]
  __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
  __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
  ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
  ops_init+0x359/0x610 net/core/net_namespace.c:139
  setup_net+0x515/0xca0 net/core/net_namespace.c:343
  copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508
  create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110
  unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228
  ksys_unshare+0x619/0xc10 kernel/fork.c:3328
  __do_sys_unshare kernel/fork.c:3399 [inline]
  __se_sys_unshare kernel/fork.c:3397 [inline]
  __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397
page last free pid 11846 tgid 11846 stack trace:
  reset_page_owner include/linux/page_owner.h:25 [inline]
  free_pages_prepare mm/page_alloc.c:1094 [inline]
  free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612
  __folio_put+0x2c8/0x440 mm/swap.c:128
  folio_put include/linux/mm.h:1486 [inline]
  free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565
  kfree+0x1c4/0x360 mm/slub.c:4588
  rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169
  ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626
  ops_exit_list net/core/net_namespace.c:173 [inline]
  cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640
  process_one_work kernel/workqueue.c:3231 [inline]
  process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
  worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Memory state around the buggy address:
 ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 7f00feaf ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Execution of command:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml /
	--subscribe "monitor" --sleep 10
fails with:
  File "/repo/./tools/net/ynl/cli.py", line 109, in main
    ynl.check_ntf()
  File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf
    op = self.rsp_by_value[nl_msg.cmd()]
KeyError: 19

Parsing Generic Netlink notification messages performs lookup for op in
the message. The message was not yet decoded, and is not yet considered
GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of
proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13).

Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the
op was not passed to the decode function, thus allow parsing of Generic
Netlink notifications without causing the failure.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/
Fixes: 0a966d60 ("tools/net/ynl: Fix extack decoding for directional ops")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While checking the latest series for ptp_ocp driver I realised that
MAINTAINERS file has wrong item about email on linux.dev domain.

Fixes: 795fd934 ("ptp_ocp: adjust MAINTAINERS and mailmap")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bind_wildcard is compiled but not run, bind_timewait is not compiled.

These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.

The author of the tests confirmed via email that these were
intended to be run.

Enable these two tests.

Fixes: 13715acf ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and
dspi).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add imx@lists.linux.dev and NXP maintainer information for lpspi driver
(drivers/spi/spi-fsl-lpspi.c).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - amd/pmf: ASUS GA403 quirk matching tweak

 - dell-smbios: Fix to the init function rollback path

* tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd: pmf: Make ASUS GA403 quirk generic
  platform/x86: dell-smbios: Fix error path in dell_smbios_init()

Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fix fromShuah Khan:
 "One single fix to a use-after-free bug resulting from
  kunit_driver_create() failing to copy the driver name leaving it on
  the stack or freeing it"

* tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Device wrappers should also manage driver name

The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.

Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.

Remove unneeded "return;" in stop_kthread().

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.

Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.

Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.

Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:

 while true; do
   rtla timerlat top -u -q & PID=$!;
   sleep 5;
   kill -INT $PID;
   sleep 0.001;
   kill -TERM $PID;
   wait $PID;
  done

Causing the following OOPS:

 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc7-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
 RIP: 0010:hrtimer_active+0x58/0x300
 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
 RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
 RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
 R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
 FS:  0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
 Call Trace:
  <TASK>
  ? die_addr+0x40/0xa0
  ? exc_general_protection+0x154/0x230
  ? asm_exc_general_protection+0x26/0x30
  ? hrtimer_active+0x58/0x300
  ? __pfx_mutex_lock+0x10/0x10
  ? __pfx_locks_remove_file+0x10/0x10
  hrtimer_cancel+0x15/0x40
  timerlat_fd_release+0x8e/0x1f0
  ? security_file_release+0x43/0x80
  __fput+0x372/0xb10
  task_work_run+0x11e/0x1f0
  ? _raw_spin_lock+0x85/0xe0
  ? __pfx_task_work_run+0x10/0x10
  ? poison_slab_object+0x109/0x170
  ? do_exit+0x7a0/0x24b0
  do_exit+0x7bd/0x24b0
  ? __pfx_migrate_enable+0x10/0x10
  ? __pfx_do_exit+0x10/0x10
  ? __pfx_read_tsc+0x10/0x10
  ? ktime_get+0x64/0x140
  ? _raw_spin_lock_irq+0x86/0xe0
  do_group_exit+0xb0/0x220
  get_signal+0x17ba/0x1b50
  ? vfs_read+0x179/0xa40
  ? timerlat_fd_read+0x30b/0x9d0
  ? __pfx_get_signal+0x10/0x10
  ? __pfx_timerlat_fd_read+0x10/0x10
  arch_do_signal_or_restart+0x8c/0x570
  ? __pfx_arch_do_signal_or_restart+0x10/0x10
  ? vfs_read+0x179/0xa40
  ? ksys_read+0xfe/0x1d0
  ? __pfx_ksys_read+0x10/0x10
  syscall_exit_to_user_mode+0xbc/0x130
  do_syscall_64+0x74/0x110
  ? __pfx___rseq_handle_notify_resume+0x10/0x10
  ? __pfx_ksys_read+0x10/0x10
  ? fpregs_restore_userregs+0xdb/0x1e0
  ? fpregs_restore_userregs+0xdb/0x1e0
  ? syscall_exit_to_user_mode+0x116/0x130
  ? do_syscall_64+0x74/0x110
  ? do_syscall_64+0x74/0x110
  ? do_syscall_64+0x74/0x110
  entry_SYSCALL_64_after_hwframe+0x71/0x79
 RIP: 0033:0x7ff0070eca9c
 Code: Unable to access opcode bytes at 0x7ff0070eca72.
 RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
 RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
  </TASK>
 Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
 ---[ end trace 0000000000000000 ]---

This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.

Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.

Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/

This was debugged by using the persistent ring buffer:

Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/

Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:

  https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes: e88ed227 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Chi Zhiling reported:

  We found a null pointer accessing in tracefs[1], the reason is that the
  variable 'ei_child' is set to LIST_POISON1, that means the list was
  removed in eventfs_remove_rec. so when access the ei_child->is_freed, the
  panic triggered.

  by the way, the following script can reproduce this panic

  loop1 (){
      while true
      do
          echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events
          echo "" > /sys/kernel/debug/tracing/kprobe_events
      done
  }
  loop2 (){
      while true
      do
          tree /sys/kernel/debug/tracing/events/kprobes/
      done
  }
  loop1 &
  loop2

  [1]:
  [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150
  [ 1147.968239][T17331] Mem abort info:
  [ 1147.971739][T17331]   ESR = 0x0000000096000004
  [ 1147.976172][T17331]   EC = 0x25: DABT (current EL), IL = 32 bits
  [ 1147.982171][T17331]   SET = 0, FnV = 0
  [ 1147.985906][T17331]   EA = 0, S1PTW = 0
  [ 1147.989734][T17331]   FSC = 0x04: level 0 translation fault
  [ 1147.995292][T17331] Data abort info:
  [ 1147.998858][T17331]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
  [ 1148.005023][T17331]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  [ 1148.010759][T17331]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges
  [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP
  [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls]
  [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G        W         ------- ----  6.6.43 #2
  [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650
  [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020
  [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398
  [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398
  [ 1148.115969][T17331] sp : ffff80008d56bbd0
  [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000
  [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100
  [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10
  [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000
  [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0
  [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
  [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0
  [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862
  [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068
  [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001
  [ 1148.198131][T17331] Call trace:
  [ 1148.201259][T17331]  eventfs_iterate+0x2c0/0x398
  [ 1148.205864][T17331]  iterate_dir+0x98/0x188
  [ 1148.210036][T17331]  __arm64_sys_getdents64+0x78/0x160
  [ 1148.215161][T17331]  invoke_syscall+0x78/0x108
  [ 1148.219593][T17331]  el0_svc_common.constprop.0+0x48/0xf0
  [ 1148.224977][T17331]  do_el0_svc+0x24/0x38
  [ 1148.228974][T17331]  el0_svc+0x40/0x168
  [ 1148.232798][T17331]  el0t_64_sync_handler+0x120/0x130
  [ 1148.237836][T17331]  el0t_64_sync+0x1a4/0x1a8
  [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300)
  [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]---

The issue is that list_del() is used on an SRCU protected list variable
before the synchronization occurs. This can poison the list pointers while
there is a reader iterating the list.

This is simply fixed by using list_del_rcu() that is specifically made for
this purpose.

Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home
Fixes: 43aa6f97 ("eventfs: Get rid of dentry pointers without refcounts")
Reported-by: Chi Zhiling <chizhiling@kylinos.cn>
Tested-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).

Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.

Cc: stable@vger.kernel.org
Fixes: 2f26ebd5 ("tracing: use timestamp to determine start of latency traces")
Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.comSuggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The commit 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.

Fixes: 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.netSigned-off-by: Mark Brown <broonie@kernel.org>

CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7.
Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this
moment.

This patch fix it.

Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.

This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).

Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).

AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.

This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.

The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that.

Fixes: 71263992 ("sch_cake: Make the dual modes fairer")
Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Document what was discussed multiple times on list and various
virtual / in-person conversations. guard() being okay in functions
<= 20 LoC is a bit of my own invention. If the function is trivial
it should be fine, but feel free to disagree :)

We'll obviously revisit this guidance as time passes and we and other
subsystems get more experience.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240830171443.3532077-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tony Nguyen says:

====================
ice: fix synchronization between .ndo_bpf() and reset

Larysa Zaremba says:

PF reset can be triggered asynchronously, by tx_timeout or by a user. With some
unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and
modify XDP rings at the same time, causing system crash.

The first patch factors out rtnl-locked code from VSI rebuild code to avoid
deadlock. The following changes lock rebuild and .ndo_bpf() critical sections
with an internal mutex as well and provide complementary fixes.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: do not bring the VSI up, if it was down before the XDP setup
  ice: remove ICE_CFG_BUSY locking from AF_XDP code
  ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset
  ice: check for XDP rings instead of bpf program when unconfiguring
  ice: protect XDP configuration with a mutex
  ice: move netif_queue_set_napi to rtnl-protected sections
====================

Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.11

Hopefully final fixes for v6.11 and this time only fixes to ath11k
driver. We need to revert hibernation support due to reported
regressions and we have a fix for kernel crash introduced in
v6.11-rc1.

* tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  MAINTAINERS: wifi: cw1200: add net-cw1200.h
  Revert "wifi: ath11k: support hibernation"
  Revert "wifi: ath11k: restore country code during resume"
  wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()
====================

Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

axienet_dma_err_handler can race with axienet_stop in the following
manner:

CPU 1                       CPU 2
======================      ==================
axienet_stop()
    napi_disable()
    axienet_dma_stop()
                            axienet_dma_err_handler()
                                napi_disable()
                                axienet_dma_stop()
                                axienet_dma_start()
                                napi_enable()
    cancel_work_sync()
    free_irq()

Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().

If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.

If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.

Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.

Fixes: 710ae728 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.

Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.

Fixes: e5c266a6 ("r8152: set bp in bulk")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host.  [0]

The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.

When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.

So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.

Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.

[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
 PF: supervisor read access in kernel mode
 PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS:  0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
 ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
 ? no_context (arch/x86/mm/fault.c:752)
 ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
 ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
 ? fou_gro_receive (net/ipv4/fou.c:233) [fou]
 udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
 udp4_gro_receive (net/ipv4/udp_offload.c:604)
 inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
 dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
 napi_gro_receive (net/core/dev.c:6170)
 ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
 ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
 napi_poll (net/core/dev.c:6847)
 net_rx_action (net/core/dev.c:6917)
 __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
 asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
 do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
 irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
 common_interrupt (arch/x86/kernel/irq.c:239)
 asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64
RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044
R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001
R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000
 ? sched_clock_cpu (kernel/sched/clock.c:371)
 acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3))
 cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237)
 cpuidle_enter (drivers/cpuidle/cpuidle.c:353)
 cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239)
 do_idle (kernel/sched/idle.c:302)
 cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1))
 start_kernel (init/main.c:1048)
 secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310)
Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel
CR2: 0000000000000008

Fixes: d92283e3 ("fou: change to use UDP socket GRO")
Reported-by: Alphonse Kurian <alkurian@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Bareudp devices update their stats concurrently.
Therefore they need proper atomic increments.

Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull bcachefs fixes from Kent Overstreet:

 - Fix a typo in the rebalance accounting changes

 - BCH_SB_MEMBER_INVALID: small on disk format feature which will be
   needed for full erasure coding support; this is only the minimum so
   that 6.11 can handle future versions without barfing.

* tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs:
  bcachefs: BCH_SB_MEMBER_INVALID
  bcachefs: fix rebalance accounting

Merge tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A number of small fixes for the late cycle:

   - Two more build fixes on 32-bit archs

   - Fixed a segfault during perf test

   - Fixed spinlock/rwlock accounting bug in perf lock contention"

* tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf daemon: Fix the build on more 32-bit architectures
  perf python: include "util/sample.h"
  perf lock contention: Fix spinlock and rwlock accounting
  perf test pmu: Set uninitialized PMU alias to null

Merge tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - hp-wmi-sensors: Check if WMI event data exists before accessing it

 - ltc2991: fix register bits defines

* tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (hp-wmi-sensors) Check if WMI event data exists
  hwmon: ltc2991: fix register bits defines

Pull btrfs fixes from David Sterba:

 - followup fix for direct io and fsync under some conditions, reported
   by QEMU users

 - fix a potential leak when disabling quotas while some extent tracking
   work can still happen

 - in zoned mode handle unexpected change of zone write pointer in
   RAID1-like block groups, turn the zones to read-only

* tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between direct IO write and fsync when using same fd
  btrfs: zoned: handle broken write pointer on zones
  btrfs: qgroup: don't use extent changeset when not needed

Pull smb server fixes from Steve French:

 - Fix crash in session setup

 - Fix locking bug

 - Improve access bounds checking

* tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: Unlock on in ksmbd_tcp_set_interfaces()
  ksmbd: unset the binding mark of a reused connection
  smb: Annotate struct xattr_smb_acl with __counted_by()