- 28 Jun, 2021 2 commits
-
-
Valentin Schneider authored
Since CPU capacity asymmetry can stem purely from maximum frequency differences (e.g. Pixel 1), a rebuild of the scheduler topology can be issued upon loading cpufreq, see: arch_topology.c::init_cpu_capacity_callback() Turns out that if this rebuild happens *before* sched_debug_init() is run (which is a late initcall), we end up messing up the sched_domain debug directory: passing a NULL parent to debugfs_create_dir() ends up creating the directory at the debugfs root, which in this case creates /sys/kernel/debug/domains (instead of /sys/kernel/debug/sched/domains). This currently doesn't happen on asymmetric systems which use cpufreq-scpi or cpufreq-dt drivers, as those are loaded via deferred_probe_initcall() (it is also a late initcall, but appears to be ordered *after* sched_debug_init()). Ionela has been working on detecting maximum frequency asymmetry via ACPI, and that actually happens via a *device* initcall, thus before sched_debug_init(), and causes the aforementionned debugfs mayhem. One option would be to punt sched_debug_init() down to fs_initcall_sync(). Preventing update_sched_domain_debugfs() from running before sched_debug_init() appears to be the safer option. Fixes: 3b87f136 ("sched,debug: Convert sysctl sched_domains to debugfs") Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lore.kernel.org/r/20210514095339.12979-1-ionela.voinescu@arm.com
-
Odin Ugedal authored
The _sum and _avg values are in general sync together with the PELT divider. They are however not always completely in perfect sync, resulting in situations where _sum gets to zero while _avg stays positive. Such situations are undesirable. This comes from the fact that PELT will increase period_contrib, also increasing the PELT divider, without updating _sum and _avg values to stay in perfect sync where (_sum == _avg * divider). However, such PELT change will never lower _sum, making it impossible to end up in a situation where _sum is zero and _avg is not. Therefore, we need to ensure that when subtracting load outside PELT, that when _sum is zero, _avg is also set to zero. This occurs when (_sum < _avg * divider), and the subtracted (_avg * divider) is bigger or equal to the current _sum, while the subtracted _avg is smaller than the current _avg. Reported-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Odin Ugedal <odin@uged.al> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Tested-by:
-
- 24 Jun, 2021 5 commits
-
-
Beata Michalska authored
Update the documentation bits referring to capacity aware scheduling with regards to newly introduced SD_ASYM_CPUCAPACITY_FULL sched_domain flag. Signed-off-by:
Beata Michalska <beata.michalska@arm.com> Signed-off-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20210603140627.8409-4-beata.michalska@arm.com
-
Beata Michalska authored
Currently the CPU capacity asymmetry detection, performed through asym_cpu_capacity_level, tries to identify the lowest topology level at which the highest CPU capacity is being observed, not necessarily finding the level at which all possible capacity values are visible to all CPUs, which might be bit problematic for some possible/valid asymmetric topologies i.e.: DIE [ ] MC [ ][ ] CPU [0] [1] [2] [3] [4] [5] [6] [7] Capacity |.....| |.....| |.....| |.....| L M B B Where: arch_scale_cpu_capacity(L) = 512 arch_scale_cpu_capacity(M) = 871 arch_scale_cpu_capacity(B) = 1024 In this particular case, the asymmetric topology level will point at MC, as all possible CPU masks for that level do cover the CPU with the highest capacity. It will work just fine for the first cluster, not so much for the second one though (consider the find_energy_efficient_cpu which might end up attempting the energy aware wake-up for a domain that does not see any asymmetry at all) Rework the way the capacity asymmetry levels are being detected, allowing to point to the lowest topology level (for a given CPU), where full set of available CPU capacities is visible to all CPUs within given domain. As a result, the per-cpu sd_asym_cpucapacity might differ across the domains. This will have an impact on EAS wake-up placement in a way that it might see different range of CPUs to be considered, depending on the given current and target CPUs. Additionally, those levels, where any range of asymmetry (not necessarily full) is being detected will get identified as well. The selected asymmetric topology level will be denoted by SD_ASYM_CPUCAPACITY_FULL sched domain flag whereas the 'sub-levels' would receive the already used SD_ASYM_CPUCAPACITY flag. This allows maintaining the current behaviour for asymmetric topologies, with misfit migration operating correctly on lower levels, if applicable, as any asymmetry is enough to trigger the misfit migration. The logic there relies on the SD_ASYM_CPUCAPACITY flag and does not relate to the full asymmetry level denoted by the sd_asym_cpucapacity pointer. Detecting the CPU capacity asymmetry is being based on a set of available CPU capacities for all possible CPUs. This data is being generated upon init and updated once CPU topology changes are being detected (through arch_update_cpu_topology). As such, any changes to identified CPU capacities (like initializing cpufreq) need to be explicitly advertised by corresponding archs to trigger rebuilding the data. Additional -dflags- parameter, used when building sched domains, has been removed as well, as the asymmetry flags are now being set directly in sd_init. Suggested-by:
-
Beata Michalska authored
Introducing new, complementary to SD_ASYM_CPUCAPACITY, sched_domain topology flag, to distinguish between shed_domains where any CPU capacity asymmetry is detected (SD_ASYM_CPUCAPACITY) and ones where a full set of CPU capacities is visible to all domain members (SD_ASYM_CPUCAPACITY_FULL). With the distinction between full and partial CPU capacity asymmetry, brought in by the newly introduced flag, the scope of the original SD_ASYM_CPUCAPACITY flag gets shifted, still maintaining the existing behaviour when one is detected on a given sched domain, allowing misfit migrations within sched domains that do not observe full range of CPU capacities but still do have members with different capacity values. It loses though it's meaning when it comes to the lowest CPU asymmetry sched_domain level per-cpu pointer, which is to be now denoted by SD_ASYM_CPUCAPACITY_FULL flag. Signed-off-by:
-
Zhaoyang Huang authored
Race detected between psi_trigger_destroy/create as shown below, which cause panic by accessing invalid psi_system->poll_wait->wait_queue_entry and psi_system->poll_timer->entry->next. Under this modification, the race window is removed by initialising poll_wait and poll_timer in group_init which are executed only once at beginning. psi_trigger_destroy() psi_trigger_create() mutex_lock(trigger_lock); rcu_assign_pointer(poll_task, NULL); mutex_unlock(trigger_lock); mutex_lock(trigger_lock); if (!rcu_access_pointer(group->poll_task)) { timer_setup(poll_timer, poll_timer_fn, 0); rcu_assign_pointer(poll_task, task); } mutex_unlock(trigger_lock); synchronize_rcu(); del_timer_sync(poll_timer); <-- poll_timer has been reinitialized by psi_trigger_create() So, trigger_lock/RCU correctly protects destruction of group->poll_task but misses this race affecting poll_timer and poll_wait. Fixes: 461daba0 ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") Co-developed-by:ziwei.dai <ziwei.dai@unisoc.com> Signed-off-by:
ke.wang <ke.wang@unisoc.com> Signed-off-by:
Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Link: https://lkml.kernel.org/r/1623371374-15664-1-git-send-email-huangzhaoyang@gmail.com
-
Huaixin Chang authored
The CFS bandwidth controller limits CPU requests of a task group to quota during each period. However, parallel workloads might be bursty so that they get throttled even when their average utilization is under quota. And they are latency sensitive at the same time so that throttling them is undesired. We borrow time now against our future underrun, at the cost of increased interference against the other system users. All nicely bounded. Traditional (UP-EDF) bandwidth control is something like: (U = \Sum u_i) <= 1 This guaranteeds both that every deadline is met and that the system is stable. After all, if U were > 1, then for every second of walltime, we'd have to run more than a second of program time, and obviously miss our deadline, but the next deadline will be further out still, there is never time to catch up, unbounded fail. This work observes that a workload doesn't always executes the full quota; this enables one to describe u_i as a statistical distribution. For example, have u_i = {x,e}_i, where x is the p(95) and x+e p(100) (the traditional WCET). This effectively allows u to be smaller, increasing the efficiency (we can pack more tasks in the system), but at the cost of missing deadlines when all the odds line up. However, it does maintain stability, since every overrun must be paired with an underrun as long as our x is above the average. That is, suppose we have 2 tasks, both specify a p(95) value, then we have a p(95)*p(95) = 90.25% chance both tasks are within their quota and everything is good. At the same time we have a p(5)p(5) = 0.25% chance both tasks will exceed their quota at the same time (guaranteed deadline fail). Somewhere in between there's a threshold where one exceeds and the other doesn't underrun enough to compensate; this depends on the specific CDFs. At the same time, we can say that the worst case deadline miss, will be \Sum e_i; that is, there is a bounded tardiness (under the assumption that x+e is indeed WCET). The benefit of burst is seen when testing with schbench. Default value of kernel.sched_cfs_bandwidth_slice_us(5ms) and CONFIG_HZ(1000) is used. mkdir /sys/fs/cgroup/cpu/test echo $$ > /sys/fs/cgroup/cpu/test/cgroup.procs echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_quota_us echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_burst_us ./schbench -m 1 -t 3 -r 20 -c 80000 -R 10 The average CPU usage is at 80%. I run this for 10 times, and got long tail latency for 6 times and got throttled for 8 times. Tail latencies are shown below, and it wasn't the worst case. Latency percentiles (usec) 50.0000th: 19872 75.0000th: 21344 90.0000th: 22176 95.0000th: 22496 *99.0000th: 22752 99.5000th: 22752 99.9000th: 22752 min=0, max=22727 rps: 9.90 p95 (usec) 22496 p99 (usec) 22752 p95/cputime 28.12% p99/cputime 28.44% The interferenece when using burst is valued by the possibilities for missing the deadline and the average WCET. Test results showed that when there many cgroups or CPU is under utilized, the interference is limited. More details are shown in: https://lore.kernel.org/lkml/5371BD36-55AE-4F71-B9D7-B86DC32E3D2B@linux.alibaba.com/Co-developed-by:Shanpei Chen <shanpeic@linux.alibaba.com> Signed-off-by:
Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by:
Huaixin Chang <changhuaixin@linux.alibaba.com> Signed-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210621092800.23714-2-changhuaixin@linux.alibaba.com
-
- 22 Jun, 2021 3 commits
-
-
Qais Yousef authored
Now cpu.uclamp.min acts as a protection, we need to make sure that the uclamp request of the task is within the allowed range of the cgroup, that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and tg->uclamp[UCLAMP_MAX]. As reported by Xuewen [1] we can have some corner cases where there's inversion between uclamp requested by task (p) and the uclamp values of the taskgroup it's attached to (tg). Following table demonstrates 2 corner cases: | p | tg | effective -----------+-----+------+----------- CASE 1 -----------+-----+------+----------- uclamp_min | 60% | 0% | 60% -----------+-----+------+----------- uclamp_max | 80% | 50% | 50% -----------+-----+------+----------- CASE 2 -----------+-----+------+----------- uclamp_min | 0% | 30% | 30% -----------+-----+------+----------- uclamp_max | 20% | 50% | 20% -----------+-----+------+----------- With this fix we get: | p | tg | effective -----------+-----+------+----------- CASE 1 -----------+-----+------+----------- uclamp_min | 60% | 0% | 50% -----------+-----+------+----------- uclamp_max | 80% | 50% | 50% -----------+-----+------+----------- CASE 2 -----------+-----+------+----------- uclamp_min | 0% | 30% | 30% -----------+-----+------+----------- uclamp_max | 20% | 50% | 30% -----------+-----+------+----------- Additionally uclamp_update_active_tasks() must now unconditionally update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for instance could have an impact on the effective UCLAMP_MIN of the tasks. | p | tg | effective -----------+-----+------+----------- old -----------+-----+------+----------- uclamp_min | 60% | 0% | 50% -----------+-----+------+----------- uclamp_max | 80% | 50% | 50% -----------+-----+------+----------- *new* -----------+-----+------+----------- uclamp_min | 60% | 0% | *60%* -----------+-----+------+----------- uclamp_max | 80% |*70%* | *70%* -----------+-----+------+----------- [1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/ Fixes: 0c18f2ec ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min") Reported-by:
Xuewen Yan <xuewen.yan94@gmail.com> Signed-off-by:
Qais Yousef <qais.yousef@arm.com> Signed-off-by:
-
Vincent Donnefort authored
DL keeps track of the utilization on a per-rq basis with the structure avg_dl. This utilization is updated during task_tick_dl(), put_prev_task_dl() and set_next_task_dl(). However, when the current running task changes its policy, set_next_task_dl() which would usually take care of updating the utilization when the rq starts running DL tasks, will not see a such change, leaving the avg_dl structure outdated. When that very same task will be dequeued later, put_prev_task_dl() will then update the utilization, based on a wrong last_update_time, leading to a huge spike in the DL utilization signal. The signal would eventually recover from this issue after few ms. Even if no DL tasks are run, avg_dl is also updated in __update_blocked_others(). But as the CPU capacity depends partly on the avg_dl, this issue has nonetheless a significant impact on the scheduler. Fix this issue by ensuring a load update when a running task changes its policy to DL. Fixes: 3727e0e1 ("sched/dl: Add dl_rq utilization tracking") Signed-off-by:
Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by:
-
Vincent Donnefort authored
RT keeps track of the utilization on a per-rq basis with the structure avg_rt. This utilization is updated during task_tick_rt(), put_prev_task_rt() and set_next_task_rt(). However, when the current running task changes its policy, set_next_task_rt() which would usually take care of updating the utilization when the rq starts running RT tasks, will not see a such change, leaving the avg_rt structure outdated. When that very same task will be dequeued later, put_prev_task_rt() will then update the utilization, based on a wrong last_update_time, leading to a huge spike in the RT utilization signal. The signal would eventually recover from this issue after few ms. Even if no RT tasks are run, avg_rt is also updated in __update_blocked_others(). But as the CPU capacity depends partly on the avg_rt, this issue has nonetheless a significant impact on the scheduler. Fix this issue by ensuring a load update when a running task changes its policy to RT. Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking") Signed-off-by:
-
- 18 Jun, 2021 8 commits
-
-
Peter Zijlstra authored
Change the type and name of task_struct::state. Drop the volatile and shrink it to an 'unsigned int'. Rename it in order to find all uses such that we can use READ_ONCE/WRITE_ONCE as appropriate. Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Will Deacon <will@kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
-
Peter Zijlstra authored
All 6 architectures define TASK_STATE in asm-offsets, but then never actually use it. Remove the definitions to make sure they never will. Signed-off-by:
-
Peter Zijlstra authored
There's an existing helper for setting TASK_RUNNING; must've gotten lost last time we did this cleanup. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
-
Peter Zijlstra authored
Remove yet another few p->state accesses. Signed-off-by:
-
Peter Zijlstra authored
When ran from the sched-out path (preempt_notifier or perf_event), p->state is irrelevant to determine preemption. You can get preempted with !task_is_running() just fine. The right indicator for preemption is if the task is still on the runqueue in the sched-out path. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210611082838.285099381@infradead.org
-
Peter Zijlstra authored
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper: task_is_running(p). Signed-off-by:
Davidlohr Bueso <dave@stgolabs.net> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Peter Zijlstra authored
Remove broken task->state references and let wake_up_process() DTRT. The anti-pattern in these patches breaks the ordering of ->state vs COND as described in the comment near set_current_state() and can lead to missed wakeups: (OoO load, observes RUNNING)<-. for (;;) { | t->state = UNINTERRUPTIBLE; | smp_mb(); ,-----> | (observes !COND) | / if (COND) ---------' | COND = 1; break; `- if (t->state != RUNNING) wake_up_process(t); // not done schedule(); // forever waiting } t->state = TASK_RUNNING; Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Ingo Molnar authored
This commit in sched/urgent moved the cfs_rq_is_decayed() function: a7b359fc: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") and this fresh commit in sched/core modified it in the old location: 9e077b52: ("sched/pelt: Check that *_avg are null when *_sum are") Merge the two variants. Conflicts: kernel/sched/fair.c Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 17 Jun, 2021 6 commits
-
-
Peter Zijlstra authored
This is a partial forward-port of Peter Ziljstra's work first posted at: https://lore.kernel.org/lkml/20180530142236.667774973@infradead.org/ Currently select_idle_cpu()'s proportional scheme uses the average idle time *for when we are idle*, that is temporally challenged. When a CPU is not at all idle, we'll happily continue using whatever value we did see when the CPU goes idle. To fix this, introduce a separate average idle and age it (the existing value still makes sense for things like new-idle balancing, which happens when we do go idle). The overall goal is to not spend more time scanning for idle CPUs than we're idle for. Otherwise we're inhibiting work. This means that we need to consider the cost over all the wake-ups between consecutive idle periods. To track this, the scan cost is subtracted from the estimated average idle time. The impact of this patch is related to workloads that have domains that are fully busy or overloaded. Without the patch, the scan depth may be too high because a CPU is not reaching idle. Due to the nature of the patch, this is a regression magnet. It potentially wins when domains are almost fully busy or overloaded -- at that point searches are likely to fail but idle is not being aged as CPUs are active so search depth is too large and useless. It will potentially show regressions when there are idle CPUs and a deep search is beneficial. This tbench result on a 2-socket broadwell machine partially illustates the problem 5.13.0-rc2 5.13.0-rc2 vanilla sched-avgidle-v1r5 Hmean 1 445.02 ( 0.00%) 451.36 * 1.42%* Hmean 2 830.69 ( 0.00%) 846.03 * 1.85%* Hmean 4 1350.80 ( 0.00%) 1505.56 * 11.46%* Hmean 8 2888.88 ( 0.00%) 2586.40 * -10.47%* Hmean 16 5248.18 ( 0.00%) 5305.26 * 1.09%* Hmean 32 8914.03 ( 0.00%) 9191.35 * 3.11%* Hmean 64 10663.10 ( 0.00%) 10192.65 * -4.41%* Hmean 128 18043.89 ( 0.00%) 18478.92 * 2.41%* Hmean 256 16530.89 ( 0.00%) 17637.16 * 6.69%* Hmean 320 16451.13 ( 0.00%) 17270.97 * 4.98%* Note that 8 was a regression point where a deeper search would have helped but it gains for high thread counts when searches are useless. Hackbench is a more extreme example although not perfect as the tasks idle rapidly hackbench-process-pipes 5.13.0-rc2 5.13.0-rc2 vanilla sched-avgidle-v1r5 Amean 1 0.3950 ( 0.00%) 0.3887 ( 1.60%) Amean 4 0.9450 ( 0.00%) 0.9677 ( -2.40%) Amean 7 1.4737 ( 0.00%) 1.4890 ( -1.04%) Amean 12 2.3507 ( 0.00%) 2.3360 * 0.62%* Amean 21 4.0807 ( 0.00%) 4.0993 * -0.46%* Amean 30 5.6820 ( 0.00%) 5.7510 * -1.21%* Amean 48 8.7913 ( 0.00%) 8.7383 ( 0.60%) Amean 79 14.3880 ( 0.00%) 13.9343 * 3.15%* Amean 110 21.2233 ( 0.00%) 19.4263 * 8.47%* Amean 141 28.2930 ( 0.00%) 25.1003 * 11.28%* Amean 172 34.7570 ( 0.00%) 30.7527 * 11.52%* Amean 203 41.0083 ( 0.00%) 36.4267 * 11.17%* Amean 234 47.7133 ( 0.00%) 42.0623 * 11.84%* Amean 265 53.0353 ( 0.00%) 47.7720 * 9.92%* Amean 296 60.0170 ( 0.00%) 53.4273 * 10.98%* Stddev 1 0.0052 ( 0.00%) 0.0025 ( 51.57%) Stddev 4 0.0357 ( 0.00%) 0.0370 ( -3.75%) Stddev 7 0.0190 ( 0.00%) 0.0298 ( -56.64%) Stddev 12 0.0064 ( 0.00%) 0.0095 ( -48.38%) Stddev 21 0.0065 ( 0.00%) 0.0097 ( -49.28%) Stddev 30 0.0185 ( 0.00%) 0.0295 ( -59.54%) Stddev 48 0.0559 ( 0.00%) 0.0168 ( 69.92%) Stddev 79 0.1559 ( 0.00%) 0.0278 ( 82.17%) Stddev 110 1.1728 ( 0.00%) 0.0532 ( 95.47%) Stddev 141 0.7867 ( 0.00%) 0.0968 ( 87.69%) Stddev 172 1.0255 ( 0.00%) 0.0420 ( 95.91%) Stddev 203 0.8106 ( 0.00%) 0.1384 ( 82.92%) Stddev 234 1.1949 ( 0.00%) 0.1328 ( 88.89%) Stddev 265 0.9231 ( 0.00%) 0.0820 ( 91.11%) Stddev 296 1.0456 ( 0.00%) 0.1327 ( 87.31%) Again, higher thread counts benefit and the standard deviation shows that results are also a lot more stable when the idle time is aged. The patch potentially matters when a socket was multiple LLCs as the maximum search depth is lower. However, some of the test results were suspiciously good (e.g. specjbb2005 gaining 50% on a Zen1 machine) and other results were not dramatically different to other mcahines. Given the nature of the patch, Peter's full series is not being forward ported as each part should stand on its own. Preferably they would be merged at different times to reduce the risk of false bisections. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Lukasz Luba authored
Energy Aware Scheduling (EAS) needs to predict the decisions made by SchedUtil. The map_util_freq() exists to do that. There are corner cases where the max allowed frequency might be reduced (due to thermal). SchedUtil as a CPUFreq governor, is aware of that but EAS is not. This patch aims to address it. SchedUtil stores the maximum allowed frequency in 'sugov_policy::next_freq' field. EAS has to predict that value, which is the real used frequency. That value is made after a call to cpufreq_driver_resolve_freq() which clamps to the CPUFreq policy limits. In the existing code EAS is not able to predict that real frequency. This leads to energy estimation errors. To avoid wrong energy estimation in EAS (due to frequency miss prediction) make sure that the step which calculates Performance Domain frequency, is also aware of the allowed CPU capacity. Furthermore, modify map_util_freq() to not extend the frequency value. Instead, use map_util_perf() to extend the util value in both places: SchedUtil and EAS, but for EAS clamp it to max allowed CPU capacity. In the end, we achieve the same desirable behavior for both subsystems and alignment in regards to the real CPU frequency. Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
-
Lukasz Luba authored
Energy Aware Scheduling (EAS) needs to be able to predict the frequency requests made by the SchedUtil governor to properly estimate energy used in the future. It has to take into account CPUs utilization and forecast Performance Domain (PD) frequency. There is a corner case when the max allowed frequency might be reduced due to thermal. SchedUtil is aware of that reduced frequency, so it should be taken into account also in EAS estimations. SchedUtil, as a CPUFreq governor, knows the maximum allowed frequency of a CPU, thanks to cpufreq_driver_resolve_freq() and internal clamping to 'policy::max'. SchedUtil is responsible to respect that upper limit while setting the frequency through CPUFreq drivers. This effective frequency is stored internally in 'sugov_policy::next_freq' and EAS has to predict that value. In the existing code the raw value of arch_scale_cpu_capacity() is used for clamping the returned CPU utilization from effective_cpu_util(). This patch fixes issue with too big single CPU utilization, by introducing clamping to the allowed CPU capacity. The allowed CPU capacity is a CPU capacity reduced by thermal pressure raw value. Thanks to knowledge about allowed CPU capacity, we don't get too big value for a single CPU utilization, which is then added to the util sum. The util sum is used as a source of information for estimating whole PD energy. To avoid wrong energy estimation in EAS (due to capped frequency), make sure that the calculation of util sum is aware of allowed CPU capacity. This thermal pressure might be visible in scenarios where the CPUs are not heavily loaded, but some other component (like GPU) drastically reduced available power budget and increased the SoC temperature. Thus, we still use EAS for task placement and CPUs are not over-utilized. Signed-off-by:
-
Lukasz Luba authored
The thermal pressure signal gives information to the scheduler about reduced CPU capacity due to thermal. It is based on a value stored in a per-cpu 'thermal_pressure' variable. The online CPUs will get the new value there, while the offline won't. Unfortunately, when the CPU is back online, the value read from per-cpu variable might be wrong (stale data). This might affect the scheduler decisions, since it sees the CPU capacity differently than what is actually available. Fix it by making sure that all online+offline CPUs would get the proper value in their per-cpu variable when thermal framework sets capping. Fixes: f12e4f66 ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
-
Dietmar Eggemann authored
In case the _avg delta is 0 there is no need to update se's _avg (level n) nor cfs_rq's _avg (level n-1). These values stay the same. Since cfs_rq's _avg isn't changed, i.e. no load is propagated down, cfs_rq's _sum should stay the same as well. So bail out after se's _sum has been updated. Signed-off-by:
-
Vincent Guittot authored
Check that we never break the rule that pelt's avg values are null if pelt's sum are. Signed-off-by:
-
- 14 Jun, 2021 1 commit
-
-
Odin Ugedal authored
Fix an issue where fairness is decreased since cfs_rq's can end up not being decayed properly. For two sibling control groups with the same priority, this can often lead to a load ratio of 99/1 (!!). This happens because when a cfs_rq is throttled, all the descendant cfs_rq's will be removed from the leaf list. When they initial cfs_rq is unthrottled, it will currently only re add descendant cfs_rq's if they have one or more entities enqueued. This is not a perfect heuristic. Instead, we insert all cfs_rq's that contain one or more enqueued entities, or it its load is not completely decayed. Can often lead to situations like this for equally weighted control groups: $ ps u -C stress USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 10009 88.8 0.0 3676 100 pts/1 R+ 11:04 0:13 stress --cpu 1 root 10023 3.0 0.0 3676 104 pts/1 R+ 11:04 0:00 stress --cpu 1 Fixes: 31bc6aea ("sched/fair: Optimize update_blocked_averages()") [vingo: !SMP build fix] Signed-off-by:
-
- 13 Jun, 2021 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Correct buffer copying when peeking events - Sync cpufeatures/disabled-features.h header with the kernel sources * tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers cpufeatures: Sync with the kernel sources perf session: Correct buffer copying when peeking events
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix use-after-free in nfs4_init_client() Bugfixes: - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() - Fix second deadlock in nfs4_evict_inode() - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP - Fix setting of the NFS_CAP_SECURITY_LABEL capability" * tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix second deadlock in nfs4_evict_inode() NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() NFS: FMODE_READ and friends are C macros, not enum types NFS: Fix a potential NULL dereference in nfs_get_client() NFS: Fix use-after-free in nfs4_init_client() NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four reasonably small fixes to the core for scsi host allocation failure paths. The root problem is that we're not freeing the memory allocated by dev_set_name(), which involves a rejig of may of the free on error paths to do put_device() instead of kfree which, in turn, has several other knock on ramifications and inspection turned up a few other lurking bugs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Only put parent device if host state differs from SHOST_CREATED scsi: core: Put .shost_dev in failure path if host state changes to RUNNING scsi: core: Fix failure handling of scsi_add_host_with_dma() scsi: core: Fix error handling of scsi_host_alloc()
-
- 12 Jun, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A pair of XIP fixes: one to fix alternatives, and one to turn off the rest of the features that require code modification - A fix to a type that was causing some alternatives to break - A build fix for BUILTIN_DTB * tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix BUILTIN_DTB for sifive and microchip soc riscv: alternative: fix typo in macro name riscv: code patching only works on !XIP_KERNEL riscv: xip: support runtime trap patching
-
Feng Tang authored
0day robot reported a 9.2% regression for will-it-scale mmap1 test case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from racing with COW during fork"). Further debug shows the regression is due to that commit changes the offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some cache alignment changes. From the perf data, the contention for 'mmap_lock' is very severe and takes around 95% cpu cycles, and it is a rw_semaphore struct rw_semaphore { atomic_long_t count; /* 8 bytes */ atomic_long_t owner; /* 8 bytes */ struct optimistic_spin_queue osq; /* spinner MCS lock */ ... Before commit 57efa1fe adds the 'write_protect_seq', it happens to have a very optimal cache alignment layout, as Linus explained: "and before the addition of the 'write_protect_seq' field, the mmap_sem was at offset 120 in 'struct mm_struct'. Which meant that count and owner were in two different cachelines, and then when you have contention and spend time in rwsem_down_write_slowpath(), this is probably *exactly* the kind of layout you want. Because first the rwsem_write_trylock() will do a cmpxchg on the first cacheline (for the optimistic fast-path), and then in the case of contention, rwsem_down_write_slowpath() will just access the second cacheline. Which is probably just optimal for a load that spends a lot of time contended - new waiters touch that first cacheline, and then they queue themselves up on the second cacheline." After the commit, the rw_semaphore is at offset 128, which means the 'count' and 'owner' fields are now in the same cacheline, and causes more cache bouncing. Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will affect its offset: CONFIG_MMU CONFIG_MEMBARRIER CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES The layout above is on 64 bits system with 0day's default kernel config (similar to RHEL-8.3's config), in which all these 3 options are 'y'. And the layout can vary with different kernel configs. Relayouting a structure is usually a double-edged sword, as sometimes it can helps one case, but hurt other cases. For this case, one solution is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t (when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes hole in 'mm_struct' will not change other fields' alignment, while restoring the regression. Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1] Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of tiny USB fixes for 5.13-rc6. There are more than I would normally like, but there's been a bunch of people banging on the gadget and dwc3 and typec code recently for I think an Android release, which has resulted in a number of small fixes. It's nice to see companies send fixes upstream for this type of work, a notable change from years ago. Anyway, fixes in here are: - usb-serial device id updates - usb-serial cp210x driver fixes for broken firmware versions - typec fixes for crazy charging devices and other reported problems - dwc3 fixes for reported problems found - gadget fixes for reported problems - tiny xhci fixes - other small fixes for reported issues. - revert of a problem fix found by linux-next testing All of these have passed 0-day and linux-next testing with no reported problems (the revert for the found linux-next build problem included)" * tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits) Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs" usb: typec: mux: Fix copy-paste mistake in typec_mux_match usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path usb: gadget: fsl: Re-enable driver for ARM SoCs usb: typec: wcove: Use LE to CPU conversion when accessing msg->header USB: serial: cp210x: fix CP2102N-A01 modem control USB: serial: cp210x: fix alternate function for CP2102N QFN20 usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() usb: dwc3: ep0: fix NULL pointer exception usb: gadget: eem: fix wrong eem header operation usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put() usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource() usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe() usb: typec: tcpm: Do not finish VDM AMS for retrying Responses usb: fix various gadget panics on 10gbps cabling usb: fix various gadgets null ptr deref on 10gbps cabling. usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir usb: f_ncm: only first packet of aggregate needs to start timer USB: f_ncm: ncm_bitrate (speed) is unsigned MAINTAINERS: usb: add entry for isp1760 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull serial driver fix from Greg KH: "A single 8250_exar serial driver fix for a reported problem with a change that happened in 5.13-rc1. It has been in linux-next with no reported problems" * tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_exar: Avoid NULL pointer dereference at ->exit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Two tiny staging driver fixes: - ralink-gdma driver authorship information fixed up - rtl8723bs driver fix for reported regression Both have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ralink-gdma: Remove incorrect author information staging: rtl8723bs: Fix uninitialized variables
-
Linus Torvalds authored
Merge tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "A single debugfs fix for 5.13-rc6, fixing a bug in debugfs_read_file_str() that showed up in 5.13-rc1. It has been in linux-next for a full week with no reported problems" * tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Fix debugfs_read_file_str()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix some documentation warnings for Allwinner - Fix duplicated GPIO groups on Qualcomm SDX55 - Fix a double enablement bug in the Ralink driver - Fix the Qualcomm SC8180x Kconfig so the driver can be selected. * tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Make it possible to select SC8180x TLMM pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled pinctrl: qcom: Fix duplication in gpio_groups pinctrl: aspeed: Fix minor documentation error
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes that should go into 5.13: - Fix a regression deadlock introduced in this release between open and remove of a bdev (Christoph) - Fix an async_xor md regression in this release (Xiao) - Fix bcache oversized read issue (Coly)" * tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block: block: loop: fix deadlock between open and remove async_xor: check src_offs is not NULL before updating it bcache: avoid oversized read request in cache missing code path bcache: remove bcache device self-defined readahead -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Just an API change for the registration changes that went into this release. Better to get it sorted out now than before it's too late" * tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block: io_uring: add feature flag for rsrc tags io_uring: change registration/upd/rsrc tagging ABI
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: - Fix performance regression caused by lack of intended batching of RCU callbacks by over-eager NOHZ-full code. - Fix cgroups related corruption of load_avg and load_sum metrics. - Three fixes to fix blocked load, util_sum/runnable_sum and util_est tracking bugs" * tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling sched/pelt: Ensure that *_sum is always synced with *_avg tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed sched/fair: Make sure to update tg contrib for blocked load sched/fair: Keep load_avg and load_sum synced
-
