- 06 Jul, 2018 5 commits
-
-
Jian-Hong Pan authored
Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Michael Scott authored
After decompression of 6lowpan socket data, an IPv6 header is inserted before the existing socket payload. After this, we reset the network_header value of the skb to account for the difference in payload size from prior to decompression + the addition of the IPv6 header. However, we fail to reset the mac_header value. Leaving the mac_header value untouched here, can cause a calculation error in net/packet/af_packet.c packet_rcv() function when an AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan interface. On line 2088, the data pointer is moved backward by the value returned from skb_mac_header(). If skb->data is adjusted so that it is before the skb->head pointer (which can happen when an old value of mac_header is left in place) the kernel generates a panic in net/core/skbuff.c line 1717. This panic can be generated by BLE 6lowpan interfaces (such as bt0) and 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan sources for compression and decompression. Signed-off-by:
Michael Scott <michael@opensourcefoundries.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== IP listification follow-ups While working on IPv6 list processing, I found another bug in the IPv4 version. So this patch series has that fix, and the IPv6 version with both fixes incorporated. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Essentially the same as the ipv4 equivalents. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
If we have an L3 master device, l3mdev_ip_rcv() will steal the skb, but we were returning NET_RX_SUCCESS from ip_rcv_finish_core() which meant that ip_list_rcv_finish() would keep it on the list. Instead let's move the l3mdev_ip_rcv() call into the caller, so that our response to a steal can be different in the single packet path (return NET_RX_SUCCESS) and the list path (forget this packet and continue). Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish") Signed-off-by:
-
- 05 Jul, 2018 32 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Ganesh Goudar authored
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d45292 ("cxgb4: clean up init_one") Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Colin Ian King authored
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: ethernet: Miscellaneous Kconfig and Makefile cleanups This patch series contains a few Kconfig and Makefile cleanups w.r.t. Ethernet vendors. ==================== Signed-off-by: -
Geert Uytterhoeven authored
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Geert Uytterhoeven authored
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by:
-
Geert Uytterhoeven authored
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by:
-
Colin Ian King authored
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
David S. Miller authored
Moshe Shemesh says: ==================== Add configuration parameters support Add configuration parameters setting through devlink. Each device registers supported configuration parameters table. Each parameter can be either generic or driver specific. The user can retrieve data on these parameters by "devlink param show" command and can set new value to a parameter by "devlink param set" command. The parameters can be set in different configuration modes: runtime - set while driver is running, no reset required. driverinit - applied while driver initializes, requires restart driver by devlink reload command. permanent - written to device's non-volatile memory, hard reset required. The patches at the end of the patchset introduce few params that are using the introduced infrastructure on mlx4 and bnxt. Command examples and output: pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value true cmode driverinit value true name max_macs type generic values: cmode driverinit value 128 name enable_64b_cqe_eqe type driver-specific values: cmode driverinit value true name enable_4k_uar type driver-specific values: cmode driverinit value false pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value false cmode driverinit value true ==================== Signed-off-by: -
Vasundhara Volam authored
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
-
Moshe Shemesh authored
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by:
-
Moshe Shemesh authored
Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by:
-
Moshe Shemesh authored
Add devlink_param_notify() function to support devlink param notifications. Add notification call to devlink param set, register and unregister functions. Add devlink_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. Signed-off-by:
-
Moshe Shemesh authored
"driverinit" configuration mode value is held by devlink to enable the driver query the value after reload. Two additional functions added to help the driver get/set the value from/to devlink: devlink_param_driverinit_value_set() and devlink_param_driverinit_value_get(). Signed-off-by:
-
Moshe Shemesh authored
Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by:
-
Moshe Shemesh authored
Add param get command which gets data per parameter. Option to dump the parameters data per device. Signed-off-by:
-
Moshe Shemesh authored
Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by:
-
Colin Ian King authored
Variable channel is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'channel' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variables my_epid and max_epid are currently assigned and not being used - however, I suspect they were intended to be used in the for-loops to reduce the dereferencing of hw. Replace hw->my_epid and hw->max_epid with these variables. Cleans up clang warnings: warning: variable 'my_epid' set but not used [-Wunused-but-set-variable] variable 'max_epid' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message. Signed-off-by:
-
Li RongQing authored
After commit 07d78363 ("net: Convert NAPI gro list into a small hash table.")' there is 8 hash buckets, which allows more flows to be held for merging. but MAX_GRO_SKBS, the total held skb for merging, is 8 skb still, limit the hash table performance. keep MAX_GRO_SKBS as 8 skb, but limit each hash list length to 8 skb, not the total 8 skb Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Heiner Kallweit authored
When runtime-suspending we configure WoL w/o touching saved_wolopts. If saved_wolopts == 0 we would power down the PHY in this case what's wrong. Therefore we have to check the actual chip WoL settings here. Fixes: 433f9d0d ("r8169: improve saved_wolopts handling") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Edward Cree authored
Since callees (ip_rcv_core() and ip_rcv_finish_core()) might free or steal the skb, we can't use the list_cut_before() method; we can't even do a list_del(&skb->list) in the drop case, because skb might have already been freed and reused. So instead, take each skb off the source list before processing, and add it to the sublist afterwards if it wasn't freed or stolen. Fixes: 5fa12739 net: ipv4: listify ip_rcv_finish Fixes: 17266ee9 net: ipv4: listified version of ip_rcv Signed-off-by:
-
Casey Leedom authored
In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
- 04 Jul, 2018 3 commits
-
-
Colin Ian King authored
Variable 'irq' is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'irq' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable old_vlan is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'name' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'name' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
