- 19 Dec, 2014 1 commit
-
-
Luis Henriques authored
Signed-off-by:Luis Henriques <luis.henriques@canonical.com>
-
- 15 Dec, 2014 17 commits
-
-
Todd Fujinaka authored
commit aec653c4 upstream. Call igb_setup_link() when the PHY is powered up. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Reported-by:
Jeff Westfahl <jeff.westfahl@ni.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by:
-
Andreas Noever authored
commit bceee4a9 upstream. pciehp assumes that dev->subordinate, the struct pci_bus for a bridge's secondary bus, exists. But we do not create that bus if we run out of bus numbers during enumeration. This leads to a NULL dereference in init_slot() (and other places). Change pciehp_probe() to return -ENODEV when no secondary bus is present. Signed-off-by:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Joonyoung Shim authored
commit 526a4045 upstream. The usb device will autoresume from choose_wakeup() if it is autosuspended with the wrong wakeup setting, but below errors occur because usb3503 misc driver will switch to standby mode when suspended. As add USB_QUIRK_RESET_RESUME, it can stop setting wrong wakeup from autosuspend_check(). [ 7.734717] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 7.854658] usb 1-3: device descriptor read/64, error -71 [ 8.079657] usb 1-3: device descriptor read/64, error -71 [ 8.294664] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 8.414658] usb 1-3: device descriptor read/64, error -71 [ 8.639657] usb 1-3: device descriptor read/64, error -71 [ 8.854667] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.264598] usb 1-3: device not accepting address 3, error -71 [ 9.374655] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.784601] usb 1-3: device not accepting address 3, error -71 [ 9.784838] usb usb1-port3: device 1-3 not suspended yet Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 7ddc6a21 upstream. These functions can be executed on the int3 stack, so kprobes are dangerous. Tracing is probably a bad idea, too. Fixes: b645af2d ("x86_64, traps: Rework bad_iret") Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alexander Kochetkov authored
commit ccfc8663 upstream. commit 6d9939f6 (i2c: omap: split out [XR]DR and [XR]RDY) changed the way how errata i207 (I2C: RDR Flag May Be Incorrectly Set) get handled. 6d9939f6 code doesn't correspond to workaround provided by errata. According to errata ISR must filter out spurious RDR before data read not after. ISR must read RXSTAT to get number of bytes available to read. Because RDR could be set while there could no data in the receive FIFO. Restored pre 6d9939f6 way of handling errata. Found by code review. Real impact haven't seen. Tested on Beagleboard XM C. Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Fixes: 6d9939f6 i2c: omap: split out [XR]DR and [XR]RDY Tested-by:
Felipe Balbi <balbi@ti.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Daniel Borkmann authored
commit 9772b54c upstream. To accomodate for enough headroom for tunnels, use MAX_HEADER instead of LL_MAX_HEADER. Robert reported that he has hit after roughly 40hrs of trinity an skb_under_panic() via SCTP output path (see reference). I couldn't reproduce it from here, but not using MAX_HEADER as elsewhere in other protocols might be one possible cause for this. In any case, it looks like accounting on chunks themself seems to look good as the skb already passed the SCTP output path and did not hit any skb_over_panic(). Given tunneling was enabled in his .config, the headroom would have been expanded by MAX_HEADER in this case. Reported-by:
Robert Święcki <robert@swiecki.net> Reference: https://lkml.org/lkml/2014/12/1/507 Fixes: 594ccc14 ("[SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in sctp_packet_transmit().") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
commit 5f478b41 upstream. mvneta_tx() dereferences skb to get skb->len too late, as hardware might have completed the transmit and TX completion could have freed the skb from another cpu. Fixes: 71f6d1b3 ("net: mvneta: replace Tx timer with a real interrupt") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
willy tarreau authored
commit aebea2ba upstream. The mvneta driver sets the amount of Tx coalesce packets to 16 by default. Normally that does not cause any trouble since the driver uses a much larger Tx ring size (532 packets). But some sockets might run with very small buffers, much smaller than the equivalent of 16 packets. This is what ping is doing for example, by setting SNDBUF to 324 bytes rounded up to 2kB by the kernel. The problem is that there is no documented method to force a specific packet to emit an interrupt (eg: the last of the ring) nor is it possible to make the NIC emit an interrupt after a given delay. In this case, it causes trouble, because when ping sends packets over its raw socket, the few first packets leave the system, and the first 15 packets will be emitted without an IRQ being generated, so without the skbs being freed. And since the socket's buffer is small, there's no way to reach that amount of packets, and the ping ends up with "send: no buffer available" after sending 6 packets. Running with 3 instances of ping in parallel is enough to hide the problem, because with 6 packets per instance, that's 18 packets total, which is enough to grant a Tx interrupt before all are sent. The original driver in the LSP kernel worked around this design flaw by using a software timer to clean up the Tx descriptors. This timer was slow and caused terrible network performance on some Tx-bound workloads (such as routing) but was enough to make tools like ping work correctly. Instead here, we simply set the packet counts before interrupt to 1. This ensures that each packet sent will produce an interrupt. NAPI takes care of coalescing interrupts since the interrupt is disabled once generated. No measurable performance impact nor CPU usage were observed on small nor large packets, including when saturating the link on Tx, and this fixes tools like ping which rely on too small a send buffer. If one wants to increase this value for certain workloads where it is safe to do so, "ethtool -C $dev tx-frames" will override this default setting. This fix needs to be applied to stable kernels starting with 3.10. Tested-By:
Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Denis Kirjanov authored
commit 2e46477a upstream. Remove optimize_div() from BPF_MOD | BPF_K case since we don't know the dividend and fix the emit_mod() by reading the mod operation result from HI register Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
-
Tom Herbert authored
commit 6fb2a756 upstream. Set the inner mac header to point to the GRE payload when doing GRO. This is needed if we proceed to send the packet through GRE GSO which now uses the inner mac header instead of inner network header to determine the length of encapsulation headers. Fixes: 14051f04 ("gre: Use inner mac length when computing tunnel length") Reported-by:
Wolfgang Walter <linux@stwm.de> Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Nicolas Dichtel authored
commit e0ebde0e upstream. rtnl_link_get_net() holds a reference on the 'struct net', we need to release it in case of error. CC: Eric W. Biederman <ebiederm@xmission.com> Fixes: b51642f6 ("net: Enable a userns root rtnl calls that are safe for unprivilged users") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Thomas Graf authored
commit f6c6fda4 upstream. Fixes: 7f28fa10 ("bonding: add arp_ip_target netlink support") Reported-by:
John Fastabend <john.fastabend@gmail.com> Cc: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Jack Morgenstein authored
commit 2d5c57d7 upstream. Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit a620a6bc upstream. If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Marcelo Leitner authored
commit 00c83b01 upstream. Currently, when trying to reuse a socket, vxlan_sock_add will grab vn->sock_lock, locate a reusable socket, inc refcount and release vn->sock_lock. But vxlan_sock_release() will first decrement refcount, and then grab that lock. refcnt operations are atomic but as currently we have deferred works which hold vs->refcnt each, this might happen, leading to a use after free (specially after vxlan_igmp_leave): CPU 1 CPU 2 deferred work vxlan_sock_add ... ... spin_lock(&vn->sock_lock) vs = vxlan_find_sock(); vxlan_sock_release dec vs->refcnt, reaches 0 spin_lock(&vn->sock_lock) vxlan_sock_hold(vs), refcnt=1 spin_unlock(&vn->sock_lock) hlist_del_rcu(&vs->hlist); vxlan_notify_del_rx_port(vs) spin_unlock(&vn->sock_lock) So when we look for a reusable socket, we check if it wasn't freed already before reusing it. Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 7c47cedf ("vxlan: move IGMP join/leave to work queue") Signed-off-by:
-
Yuri Chislov authored
commit be6572fd upstream. When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:
Yuri Chislov <yuri.chislov@gmail.com> Tested-by:
-
lucien authored
commit 20ea60ca upstream. Now the vti_link_ops do not point the .dellink, for fb tunnel device (ip_vti0), the net_device will be removed as the default .dellink is unregister_netdevice_queue,but the tunnel still in the tunnel list, then if we add a new vti tunnel, in ip_tunnel_find(): hlist_for_each_entry_rcu(t, head, hash_node) { if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr && link == t->parms.link && ==> type == t->dev->type && ip_tunnel_key_match(&t->parms, flags, key)) break; } the panic will happen, cause dev of ip_tunnel *t is null: [ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel] [ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0 [ 3835.073008] Oops: 0000 [#1] SMP ..... [ 3835.073008] Stack: [ 3835.073008] ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0 [ 3835.073008] ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858 [ 3835.073008] ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000 [ 3835.073008] Call Trace: [ 3835.073008] [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel] [ 3835.073008] [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti] [ 3835.073008] [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0 [ 3835.073008] [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70 [ 3835.073008] [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60 [ 3835.073008] [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0 [ 3835.073008] [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270 [ 3835.073008] [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90 [ 3835.073008] [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30 [ 3835.073008] [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0 [ 3835.073008] [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30 .... modprobe ip_vti ip link del ip_vti0 type vti ip link add ip_vti0 type vti rmmod ip_vti do that one or more times, kernel will panic. fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in which we skip the unregister of fb tunnel device. do the same on ip6_vti. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
- 10 Dec, 2014 22 commits
-
-
Christian König authored
commit 86b27638 upstream. Not just the userspace relocs, otherwise we won't wait for a swapped out page tables to be swapped in again. v2: rebased on Alex current drm-fixes-3.18 Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [ luis: backported to 3.16: used Christian's backport to 3.17 ] Signed-off-by:
-
Vishnu Motghare authored
commit 681d15a0 upstream. Cadence I2C controller has bug wherein it generates invalid read transactions after timeout in master receiver mode. This driver does not use the HW timeout and this interrupt is disabled but the feature itself cannot be disabled. Hence, this patch writes the maximum value (0xFF) to this register. This is one of the workarounds to this bug and it will not avoid the issue completely but reduces the chances of error. Signed-off-by:
Vishnu Motghare <vishnum@xilinx.com> Signed-off-by:
Harini Katakam <harinik@xilinx.com> Signed-off-by:
-
Grygorii Strashko authored
commit 9ea359f7 upstream. According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a ("i2c: omap: query STP always when NACK is received"). Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by:
Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Tejun Heo authored
commit 2b21ef0a upstream. Just like 0x1600 which got blacklisted by 66a7cbc3 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171Signed-off-by:
-
Paul Mackerras authored
commit 7c3fbbdd upstream. The bounds check for nodeid in ____cache_alloc_node gives false positives on machines where the node IDs are not contiguous, leading to a panic at boot time. For example, on a POWER8 machine the node IDs are typically 0, 1, 16 and 17. This means that num_online_nodes() returns 4, so when ____cache_alloc_node is called with nodeid = 16 the VM_BUG_ON triggers, like this: kernel BUG at /home/paulus/kernel/kvm/mm/slab.c:3079! Call Trace: .____cache_alloc_node+0x5c/0x270 (unreliable) .kmem_cache_alloc_node_trace+0xdc/0x360 .init_list+0x3c/0x128 .kmem_cache_init+0x1dc/0x258 .start_kernel+0x2a0/0x568 start_here_common+0x20/0xa8 To fix this, we instead compare the nodeid with MAX_NUMNODES, and additionally make sure it isn't negative (since nodeid is an int). The check is there mainly to protect the array dereference in the get_node() call in the next line, and the array being dereferenced is of size MAX_NUMNODES. If the nodeid is in range but invalid (for example if the node is off-line), the BUG_ON in the next line will catch that. Fixes: 14e50c6a ("mm: slab: Verify the nodeid passed to ____cache_alloc_node") Signed-off-by:
Paul Mackerras <paulus@samba.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Daniel Forrest authored
commit c4ea95d7 upstream. Andrew Morton noticed that the error return from anon_vma_clone() was being dropped and replaced with -ENOMEM (which is not itself a bug because the only error return value from anon_vma_clone() is -ENOMEM). I did an audit of callers of anon_vma_clone() and discovered an actual bug where the error return was being lost. In __split_vma(), between Linux 3.11 and 3.12 the code was changed so the err variable is used before the call to anon_vma_clone() and the default initial value of -ENOMEM is overwritten. So a failure of anon_vma_clone() will return success since err at this point is now zero. Below is a patch which fixes this bug and also propagates the error return value from anon_vma_clone() in all cases. Fixes: ef0855d3 ("mm: mempolicy: turn vma_set_policy() into vma_dup_policy()") Signed-off-by:
Daniel Forrest <dan.forrest@ssec.wisc.edu> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tim Hartrick <tim@edgecast.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Hugh Dickins authored
commit 2022b4d1 upstream. I've been seeing swapoff hangs in recent testing: it's cycling around trying unsuccessfully to find an mm for some remaining pages of swap. I have been exercising swap and page migration more heavily recently, and now notice a long-standing error in copy_one_pte(): it's trying to add dst_mm to swapoff's mmlist when it finds a swap entry, but is doing so even when it's a migration entry or an hwpoison entry. Which wouldn't matter much, except it adds dst_mm next to src_mm, assuming src_mm is already on the mmlist: which may not be so. Then if pages are later swapped out from dst_mm, swapoff won't be able to find where to replace them. There's already a !non_swap_entry() test for stats: move that up before the swap_duplicate() and the addition to mmlist. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by:
-
Andrew Morton authored
commit 92788ac1 upstream. If kzalloc() failed and then evdev_open_device() fails, evdev_open() will pass a vmalloc'ed pointer to kfree. This might fix https://bugzilla.kernel.org/show_bug.cgi?id=88401, where there was a crash in kfree(). Reported-by:
Christian Casteyde <casteyde.christian@free.fr> Belatedly-Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Seth Forshee authored
commit 8d609725 upstream. These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c3747 ("xen/netfront: handle compound page fragments on transmit") Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Andrew Morton authored
commit 91b57191 upstream. In some android devices, there will be a "divide by zero" exception. vmpr->scanned could be zero before spin_lock(&vmpr->sr_lock). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=88051 [akpm@linux-foundation.org: neaten] Reported-by:
ji_ang <ji_ang@163.com> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by:
-
Weijie Yang authored
commit fb993fa1 upstream. If a frontswap dup-store failed, it should invalidate the expired page in the backend, or it could trigger some data corruption issue. Such as: 1. use zswap as the frontswap backend with writeback feature 2. store a swap page(version_1) to entry A, success 3. dup-store a newer page(version_2) to the same entry A, fail 4. use __swap_writepage() write version_2 page to swapfile, success 5. zswap do shrink, writeback version_1 page to swapfile 6. version_2 page is overwrited by version_1, data corrupt. This patch fixes this issue by invalidating expired data immediately when meet a dup-store failure. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
Petr Mladek authored
commit f5475cc4 upstream. I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Petr Mladek <pmladek@suse.cz> Tested-by:
-
Dmitry Torokhov authored
commit aad0b624 upstream. irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Signed-off-by:
-
Devin Ryles authored
commit 249cd0a1 upstream. This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by:
Devin Ryles <devin.ryles@intel.com> Signed-off-by:
-
Daniel Vetter authored
commit b0616c53 upstream. Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by:
Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
Jani Nikula <jani.nikula@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Daniel Vetter authored
commit b6836227 upstream. Apparently PCH fifo underruns are tricky, we have plenty reports that we see the occasional underrun (especially at boot-up). So for a change let's see what happens when we don't re-enable pch fifo underrun reporting when the pipe is disabled. This means that the kernel can't catch pch fifo underruns when they happen (except when all pipes are on on the pch). But we'll still catch underruns when disabling the pipe again. So not a terrible reduction in test coverage. Since the DRM_ERROR is new and hence a regression plan B would be to revert it back to a debug output. Which would be a lot worse than this hack for underrun test coverage in the wild. See the referenced discussions for more. References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=86233 References: https://bugs.freedesktop.org/show_bug.cgi?id=86478Signed-off-by:
lu hua <huax.lu@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Kailang Yang authored
commit b734304f upstream. Dell has new machines. It supports headset Mic and Headphone Mic. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Dave Airlie authored
commit 8b62c8c6 upstream. Introduced in b440bde7, however it was added to the wrong function in nouveau. https://bugzilla.kernel.org/show_bug.cgi?id=86011 Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit 226d63a1 upstream. Indications are that no GF116's actually have a copy engine there, but actually have the decompression engine. This engine can be made to do copies, but that should be done separately. Unclear why this didn't turn up on all GF116's, but perhaps the non-mobile ones came with enough VRAM to not trigger ttm migrations in test scenarios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=85465 Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=59168Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ian Campbell authored
commit 094cb981 upstream. memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce4 "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Chris Clayton authored
commit e2e68ae6 upstream. commit e6023367 'x86, kaslr: Prevent .bss from overlaping initrd' broke the cross compile of x86. It added a objdump invocation, which invokes the host native objdump and ignores an active cross tool chain. Use $(OBJDUMP) instead which takes the CROSS_COMPILE prefix into account. [ tglx: Massage changelog and use $(OBJDUMP) ] Fixes: e6023367 'x86, kaslr: Prevent .bss from overlaping initrd' Signed-off-by:
Chris Clayton <chris2553@googlemail.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/54705C8E.1080400@googlemail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
sensoray-dev authored
commit 1f391217 upstream. length is the size of the buffer, not the payload. That's set using vb2_set_plane_payload(). Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
