- 06 Dec, 2023 24 commits
-
-
Shannon Nelson authored
Set the lif->ionic value that is used in some ethtool callbacks before setting ethtool ops. There really shouldn't be any race issues before this change since the netdev hasn't been registered yet, but this seems more correct. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-3-shannon.nelson@amd.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Brett Creeley authored
Each time a VF attribute is set via iproute a call to get the VF configuration is also made. This is currently problematic because for each VF configuration call there are multiple commands sent to the device. Unfortunately, this doesn't scale well. Fix this by reporting the cached VF attributes. The original change to query the device for getting the VF attributes f16f5be3 ("ionic: Query FW when getting VF info via ndo_get_vf_config") was made to remain consistent with device set VF attributes. However, after further investigation there is no need to query the device. Signed-off-by: -
Yan Zhai authored
Commit da37845f ("packet: uses kfree_skb() for errors.") switches from consume_skb to kfree_skb to improve error handling. However, this could bring a lot of noises when we monitor real packet drops in kfree_skb[1], because in tpacket_rcv or packet_rcv only packet clones can be freed, not actual packets. Adding a generic drop reason to allow distinguish these "clone drops". [1]: https://lore.kernel.org/netdev/CABWYdi00L+O30Q=Zah28QwZ_5RU-xcxLFUK2Zj08A8MrLk9jzg@mail.gmail.com/ Fixes: da37845f ("packet: uses kfree_skb() for errors.") Suggested-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by:
Yan Zhai <yan@cloudflare.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/ZW4piNbx3IenYnuw@debian.debianSigned-off-by:
-
Coco Li authored
Original errors: Documentation/networking/net_cachelines/index.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/inet_connection_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/inet_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/net_device.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/snmp.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Documentation/networking/net_cachelines/tcp_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent. Fixes: 14006f1d ("Documentations: Analyze heavily used Networking related structs") Signed-off-by:
Coco Li <lixiaoyan@google.com> Link: https://lore.kernel.org/r/20231204220728.746134-1-lixiaoyan@google.comSigned-off-by:
-
Johannes Berg authored
There are multiple ways to query for the carrier state: through rtnetlink, sysfs, and (possibly) ethtool. Synchronize linkwatch work before these operations so that we don't have a situation where userspace queries the carrier state between the driver's carrier off->on transition and linkwatch running and expects it to work, when really (at least) TX cannot work until linkwatch has run. I previously posted a longer explanation of how this applies to wireless [1] but with this wireless can simply query the state before sending data, to ensure the kernel is ready for it. [1] https://lore.kernel.org/all/346b21d87c69f817ea3c37caceb34f1f56255884.camel@sipsolutions.net/Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231204214706.303c62768415.I1caedccae72ee5a45c9085c5eb49c145ce1c0dd5@changeidSigned-off-by:
-
Jakub Kicinski authored
Coco Li says: ==================== Reorganize remaining patch of networking struct cachelines Rebase patches to top-of-head in https://lwn.net/Articles/951321/ to ensure the results of the cacheline savings are still accurate. ==================== Link: https://lore.kernel.org/r/20231204201232.520025-1-lixiaoyan@google.comSigned-off-by:
-
Coco Li authored
The variables are organized according in the following way: - TX read-mostly hotpath cache lines - TXRX read-mostly hotpath cache lines - RX read-mostly hotpath cache lines - TX read-write hotpath cache line - TXRX read-write hotpath cache line - RX read-write hotpath cache line Fastpath cachelines end after rcvq_space. Cache line boundaries are enforced only between read-mostly and read-write. That is, if read-mostly tx cachelines bleed into read-mostly txrx cachelines, we do not care. We care about the boundaries between read and write cachelines because we want to prevent false sharing. Fast path variables span cache lines before change: 12 Fast path variables span cache lines after change: 8 Suggested-by:
Wei Wang <weiwan@google.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231204201232.520025-3-lixiaoyan@google.comSigned-off-by:
-
Coco Li authored
Reorganize fast path variables on tx-txrx-rx order Fastpath variables end after npinfo. Below data generated with pahole on x86 architecture. Fast path variables span cache lines before change: 12 Fast path variables span cache lines after change: 4 Suggested-by:
-
Shinas Rasheed authored
Inquire firmware on supported offloads, as well as convey offloads enabled dynamically to firmware. New control net API functionality is required for the above. Implement control net API framework for offloads. Additionally, fetch/insert offload metadata from hardware RX/TX buffer respectively during receive/transmit. Currently supported offloads include checksum and TSO. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231204154940.2583140-1-srasheed@marvell.comSigned-off-by:
-
Jakub Kicinski authored
Tobias Waldekranz says: ==================== net: mvmdio: Performance related improvements Observations of the XMDIO bus on a CN9130-based system during a firmware download showed a very low bus utilization, which stemmed from the 150us (10x the average access time) sleep which would take place when the first poll did not succeed. With this series in place, bus throughput increases by about 10x, multiplied by whatever gain you are able to extract from running the MDC at a higher frequency (hardware dependent). ==================== Link: https://lore.kernel.org/r/20231204100811.2708884-1-tobias@waldekranz.comSigned-off-by:
-
Tobias Waldekranz authored
Support the standard "clock-frequency" attribute to set the generated MDC frequency. If not specified, the driver will leave the divisor untouched. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Tobias Waldekranz authored
Before this change, when operating in polled mode, i.e. no IRQ is available, every individual C45 access would be hit with a 150us sleep after the bus access. For example, on a board with a CN9130 SoC connected to an MV88X3310 PHY, a single C45 read would take around 165us: root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003 Performed 1000 reads in 165ms By replacing the long sleep with a tighter poll loop, we observe a 10x increase in bus throughput: root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003 Performed 1000 reads in 15ms Signed-off-by: -
Jakub Kicinski authored
ynl.h has a growing amount of "internal" stuff, which may confuse users who try to take a look at the external API. Currently the internals are at the bottom of the file with a banner in between, but this arrangement makes it hard to add external APIs / inline helpers which need internal definitions. Move internals to a separate header. Link: https://lore.kernel.org/r/20231202211225.342466-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
If kernel didn't give use any meaningful error - print a strerror() to the ynl error message. Reviewed-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20231202211310.342716-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Commit 1768d8a7 ("tools/net/ynl: Add support for create flags") added support for setting legacy netlink CRUD flags on netlink messages (NLM_F_REPLACE, _EXCL, _CREATE etc.). Most of genetlink won't need these, don't force callers to pass in an empty argument to each do() call. Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231202211005.341613-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Uwe Kleine-König says: ==================== net*: Convert to platform remove callback returning void (implicit) v1 of this series can be found at https://lore.kernel.org/netdev/20231117095922.876489-1-u.kleine-koenig@pengutronix.de. Changes since then: - Dropped patch #1 as Alex objected. Patch #1 (was #2 before) now converts ipa to remove_new() and introduces an error message in the error path that failed before. ==================== Link: https://lore.kernel.org/r/cover.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20231117095922.876489-9-u.kleine-koenig@pengutronix.deSigned-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/49795ee930be6a9a24565e5e7133e6f8383ab532.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-8-u.kleine-koenig@pengutronix.deSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/b0488fa6181a47668e5737905ae7adc8d7cd055e.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-7-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-6-u.kleine-koenig@pengutronix.deSigned-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/7c1d50d559c0e0e36a20eb3e410f6e9d3f884b6f.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231117095922.876489-5-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Arnd Bergmann authored
This function exceeds the stack frame warning limit: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pri': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:1039:1: error: the frame size of 1408 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Use dynamic allocation for the largest stack object instead. It would be nice to rewrite this file to completely avoid the extra buffer and just use the one that was already allocated by debugfs, but that is a much larger change. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231204085735.4112882-1-arnd@kernel.orgSigned-off-by:
-
- 05 Dec, 2023 16 commits
-
-
Jakub Kicinski authored
The ynl-generated user space C code is already above 25kLoC and is growing. The initial reason to commit these files was to make reviewing changes to the generator easier. Unfortunately, it has the opposite effect on reviewing changes to specs, and we get far more changes to specs than to the generator. Uncommit those fails, as they are generated on the fly as needed. netdev patchwork now runs a script on each series to create a diff of generated code on the fly, for the rare cases when looking at it is helpful: https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.shSuggested-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
Alex Austin says: ==================== sfc: Implement ndo_hwtstamp_(get|set) Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena. ==================== Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.comSigned-off-by:
-
Alex Austin authored
Update efx->ptp_data to use kernel_hwtstamp_config and implement ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from efx_ioctl. Signed-off-by:
Alex Austin <alex.austin@amd.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.comSigned-off-by:
-
Alex Austin authored
Update efx->ptp_data to use kernel_hwtstamp_config and implement ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from efx_ioctl. Signed-off-by:
-
Zhengchao Shao authored
The .parse_protocol hook function in the ipvlan_header_ops structure is not implemented. As a result, when the AF_PACKET family is used to send packets, skb->protocol will be set to 0. Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use eth_header_parse_protocol function to obtain the protocol. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
-
Zhengchao Shao authored
The .parse_protocol hook function in the macvlan_header_ops structure is not implemented. As a result, when the AF_PACKET family is used to send packets, skb->protocol will be set to 0. Macvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use eth_header_parse_protocol function to obtain the protocol. Suggested-by:
-
Paolo Abeni authored
Hangbin Liu says: ==================== Conver net selftests to run in unique namespace (Part 1) As Guillaume pointed, many selftests create namespaces with very common names (like "client" or "server") or even (partially) run directly in init_net. This makes these tests prone to failure if another namespace with the same name already exists. It also makes it impossible to run several instances of these tests in parallel. This patch set intend to conver all the net selftests to run in unique namespace, so we can update the selftest freamwork to run all tests in it's own namespace in parallel. After update, we only need to wait for the test which need longest time. As the total patch set is too large. I break it to severl parts. This is the first part. v2 -> v3: - Convert all ip netns del to cleanup_ns (Justin Iurman) v1 -> v2: - Split the large patch set to small parts for easy review (Paolo Abeni) - Move busywait from forwarding/lib.sh to net/lib.sh directly (Petr Machata) - Update setup_ns/cleanup_ns struct (Petr Machata) - Remove default trap in lib.sh (Petr Machata) ==================== Link: https://lore.kernel.org/r/20231202020110.362433-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./unicast_extensions.sh /usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin) ########################################################################### Unicast address extensions tests (behavior of reserved IPv4 addresses) ########################################################################### TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ] TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ] TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ] ... TEST: assign and ping class D address (is forbidden) [ OK ] TEST: routing using class D (is forbidden) [ OK ] TEST: routing using 127/8 (is forbidden) [ OK ] Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./sctp_vrf.sh Testing For SCTP VRF: TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS] ... TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS] ***v6 Tests Done*** Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./ndisc_unsolicited_na_test.sh TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=1 [ OK ] Tests passed: 8 Tests failed: 0 Acked-by: -
Hangbin Liu authored
Here is the test result after conversion. ]# ./l2tp.sh TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel [ OK ] TEST: IPv6 route through L2TP tunnel [ OK ] TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ] Tests passed: 16 Tests failed: 0 Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./ioam6.sh -------------------------------------------------------------------------- OUTPUT tests -------------------------------------------------------------------------- TEST: Unknown IOAM namespace (inline mode) [ OK ] TEST: Unknown IOAM namespace (encap mode) [ OK ] TEST: Missing trace room (inline mode) [ OK ] TEST: Missing trace room (encap mode) [ OK ] TEST: Trace type with bit 0 only (inline mode) [ OK ] ... TEST: Full supported trace (encap mode) [ OK ] -------------------------------------------------------------------------- GLOBAL tests -------------------------------------------------------------------------- TEST: Forward - Full supported trace (inline mode) [ OK ] TEST: Forward - Full supported trace (encap mode) [ OK ] - Tests passed: 88 - Tests failed: 0 Acked-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./icmp.sh OK Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./icmp_redirect.sh ########################################################################### Legacy routing ########################################################################### TEST: IPv4: redirect exception [ OK ] ... TEST: IPv4: mtu exception plus redirect [ OK ] TEST: IPv6: mtu exception plus redirect [ OK ] Tests passed: 40 Tests failed: 0 Tests xfailed: 0 Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./traceroute.sh TEST: IPV6 traceroute [ OK ] TEST: IPV4 traceroute [ OK ] Tests passed: 2 Tests failed: 0 Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./drop_monitor_tests.sh Software drops test TEST: Capturing active software drops [ OK ] TEST: Capturing inactive software drops [ OK ] Hardware drops test TEST: Capturing active hardware drops [ OK ] TEST: Capturing inactive hardware drops [ OK ] Tests passed: 4 Tests failed: 0 Acked-by:
-
