These are dead code, including in the downstream Raspberry Pi tree.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now we just need to get the other drivers merged and finish the style
cleanups/garbage collecting so we can get out of staging.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel.  This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The VCHIQ communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's been tempting to replace this with (L1) cache_line_size(), but
that's really not what the value is about.  It's about coordinating
the condition for the pagelist fragment behavior between the two
sides.  However, the property was not accepted for the upstream DT
binding, so we have to use the firmware's fallback value.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver is now in the cryptodev tree, so remove it from
drivers/staging as it's no longer needed here.

Based on a patch from Gilad, but the mailing list didn't like it :(
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was requested by Rob Herring in DT bindings review.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up checkpatch error:
ERROR: do not initialise globals to 0
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue found by checkpatch.pl script in
handle_scan_done().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename variables with datatype 'u8' in their name to follow the linux
coding style.

Renamed following variables:
u8abort_running_scan
pu8Buffer
pu8keybuf
pu8msa
u8remain_on_chan_flag
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor handle_disconnect() to avoid line over 80 characters issue
reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 character' issue reported by checkpatch.pl script in
handle_scan().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to avoid use of uppercase for label names, to follow linux
coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor cfg_scan_result() API to avoid 'line over 80 chars' issue
reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 char' issue found in checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue found by checkpatch.pl script. Moved
the common code from wilc_wfi_cfg_parse_tx_action() &
wilc_wfi_cfg_parse_rx_action() to new function to avoid checkpatch issue.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 characters' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'line over 80 char' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camleCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This extends spk_io_ops with a synth_out_unicode which takes a u16 character
instead of just a byte, and extends spk_ttyio to implement it to emit
utf-8. spk_do_catch_up_unicode can then be introduced to benefit from
synth_out_unicode, and speakup_dummy made to use spk_do_catch_up_unicode instead
of spk_do_catch_up.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable 'val' is initialized with a value that is never read, it is
updated with a new value again after intitialization. Remove the
redundant initialization and move the declaration and assignment into
the scope of the for-loop.

Cleans up clang warning:
drivers/staging/comedi/drivers/adl_pci6208.c:61:15: warning: Value
stored to 'val' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces custom ROR32 and ROL32 macros for the ones included in
bitops header of the linux kernel.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One of Neil's recent cleanups apparently has led the code to get
to a state where gcc tracks the 'seqnr' variable just enough to
see that it is sometimes initialized in seq_client_alloc_seq(),
but not enough that it can prove this initialization to be reliable
before the use of that variable:

drivers/staging/lustre/lustre/fid/fid_request.c: In function 'seq_client_alloc_fid':
drivers/staging/lustre/lustre/fid/fid_request.c:245:22: error: 'seqnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code seems to be otherwise correct, and I could not come
up with a good way to simplify it further, so this adds a fake
initialization to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We now allow lustre to be built when CONFIG_MODULES is disabled,
but that causes a build failure:

In file included from drivers/staging/lustre/include/linux/libcfs/libcfs.h:42,
                 from drivers/staging/lustre/lustre/obdclass/lu_object.c:44:
drivers/staging/lustre/lustre/obdclass/lu_object.c: In function 'lu_context_key_degister':
drivers/staging/lustre/lustre/obdclass/lu_object.c:1410:51: error: dereferencing pointer to incomplete type 'struct module'

This particular case can be avoided by using the module_name()
macro that was designed exactly to handle printing the name of
a module in all configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.17b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for IIO in the 4.17 cycle

The uptick in staging cleanup is partly due to GSoC Applications
process being underway and one of Daniel's tasks being to try
cleaning up an IIO driver to move out of staging.
Naturally there is some normal staging cleanup progress in here
as well.

New device support
* Microchip mcp4018
  - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
* On Semiconductor lv0104cs
  - New driver to support this ambient light sensor.

Cleanup
* axp20x_adc
  - remove a !! in favour of clear ternary operator.
* ad2s1210 (staging cleanup)
  - Reorganise to avoid ending a line with [
  - Remove some unnecessary defines.
  - Remove unsed variable.
* ad5380
  - Replace magic 0 with IIO_CHAN_INFO_RAW
* ad5764
  - Replace magic 0 with IIO_CHA_INFO_RAW
* ad7150 (staging cleanup)
  - Align arguements with parenthesis.
* ad7152 (staging cleanup)
  - Align arguements.
* ad7746 (staging cleanup)
  - Align arguements.
* ad7816
  - Remove pointless void pointer cast.
* ade7753
  - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
    checkpatch (this macro didn't really help anyway).  Also drop the
    macro from the meter.h header.
* ade7754 (staging cleanup)
  - Add names to funciton definition arguements.
  - Align arguements with open parenthesis where possible.
* ade7758 (staging cleanup)
  - Remove __func__ from dev_dbg statements as provided by dynamic
    debug anyway.
  - Align arguements with open parenthesis where possible.
* ade7759 (staging cleanup)
  - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
    checkpatch.
* adis16201 (staging cleanup)
  - Headers in alphabetical order.
  - Blank lines before returns.
* adis16209 (staging cleanup)
  - Headers in alphabetical order
  - Change some definition names to make them more meaningful (2 rounds
    of this).
  - Add explicit _REG prefix to register names to make them
    obviously different from fields within those registers.
  - Remove some superflous comments and group definitions better.
  - Use a switch statement to make it semantically obvious that we
    only have two options (rather than an unlimited 'else').
  - Use sign_extent32 instead of open coding.
* adt7316 (staging cleanup)
  - Move an export next to symbol.
* bmc150
  - drop redundant __func__ in dynamic debug.
* ccs811
  - Rename varaible to better reflect what it does.
* cros_ec
  - Reduce sampling frequency before suspending to avoid preventing
    suspend.
* dummy
  - Correct whitespace in Kconfig.
  - Add extra description in Kconfig.
* ds1803
  - Remove a VLA which we always know is 2 long.
* hid-sensor-accel
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-gyro
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-light
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-magn
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* lm3533
  - Replace magic number 0 by IIO_CHAN_INFO_RAW
* mlx90632
  - Squash a smatch warning - no runtime effect.
* stm32_dfsdm:
  - Cleanup the dt bindings.
* sx9500
  - Add GPIO ACPI mapping table to behave correctly when firmware
    doesn't provide the mapping.
* tsl2x7x (staging cleanup)
  - Fix the proximity sensor functionality.
  - Remove platform data provided power functions.  There are much
    better ways to do this these days.
  - Introduce some common functions to avoid various repititions.
  - Stop using mutex_trylock when mutex_lock and wait a bit is fine.
  - Improve error handling in various places.
  - Drop some 'Camel case' (which wasn't actually strickly camel case
    but was a bit odd.
  - Drop some _available sysfs attributes for things that don't exist
    (for particular supported parts).

Drop dependency on ARCH_LAYERSCAPE (which in turn depends on ARM64),
thus allowing this driver to compile on all architectures supported
by the fsl-mc bus driver.

This was compile tested on:
 - powerpc (corenet_basic_defconfig, ppc64_defconfig)
 - x86 (i386_defconfig, x86_64_defconfig, needs CONFIG_OF)
 - arm64 (defconfig)
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One MC command structure got away with using uXX fields instead
of __leXX. Fix it.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable old_data is a bool type, which only receives the value
'true' in the function ad2s1210_config_write and ad2s1210_config_read.
There is no other use for this variable. This patch removes old_data
from the ad2s1210_state and from all the function that use it.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch removes some #define directives not used in the code.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch fixes the checkpatch.pl check:

iio/resolver/ad2s1210.c:202: CHECK: Lines should not end with a '['
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This fixes the following checkpatch.pl CHECK: Alignment should match
open parenthesis
Signed-off-by: Tom Lebreux <tomlebreux@cock.li>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>