- 14 Jul, 2020 40 commits
-
-
Amit Cohen authored
The trap identifier was increased to 10 bits in new versions of the Programmer's Reference Manual (PRM). Increase it accordingly in the Host PacKet Trap (HPKT) register and in the Completion Queue Element (CQE). This is significant for subsequent patches that will introduce trap identifiers which utilize the extended range. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When mirroring packets to the CPU port the mirrored packets are trapped to the CPU. However, unlike other traps, it is not possible to set a policer on the associated trap group. Instead, the policer needs to be set on the SPAN agent. Moreover, the policer ID must be within a specified range: From a configurable (even) base ID to this base plus the maximum number of SPAN agents. While the immediate use case is to set the policer on a SPAN agent that mirrors to the CPU port, a policer can be set on any SPAN agent. Therefore, the operation is implemented for all SPAN agent types. Extend the SPAN agent request API to allow passing the desired policer ID that should be bound to the SPAN agent. Return an error for Spectrum-1, as it does not support policer setting on a SPAN agent. Reviewed-by:
-
Ido Schimmel authored
Currently, the only parameter of a SPAN agent is the netdev which the SPAN agent should mirror to. The next patch will add the ability to request a SPAN agent that mirrors to a specific netdev and has a specific policer ID bound to it. This is required when mirroring packets to the CPU port. Therefore, encapsulate the sole parameter to mlxsw_sp_span_agent_get() in a structure, so that it could later be extended with policer information. Reviewed-by:
-
Ido Schimmel authored
The Spectrum-2 and Spectrum-3 ASICs are able to mirror packets towards the CPU. These packets are then trapped like any other packet, but with a special packet trap and additional metadata such as why the packet was mirrored. The ability to mirror packets towards the CPU will be utilized by a subsequent patch set that will mirror packets that were dropped by the ASIC for various buffer-related reasons, such as tail-drop and early-drop. Add mirroring towards the CPU as a new SPAN agent type and re-use the functions that mirror to a physical port where possible. Reviewed-by:
-
Ido Schimmel authored
Currently, the destination netdev to which we mirror must be a valid netdev. However, this is going to change with the introduction of mirroring towards the CPU port, as the CPU port does not have a backing netdev. Avoid dereferencing the destination netdev when it is not clear if it is valid or not. Reviewed-by:
-
Ido Schimmel authored
The parms_set() callback is supposed to fill in the parameters for the SPAN agent, such as the destination port and encapsulation info, if any. When mirroring to the CPU port we cannot resolve the destination port (the CPU port) without access to the driver private info. Pass the driver private info to parms_set() callback so that it could be used later on to resolve the CPU port. Reviewed-by:
-
Ido Schimmel authored
The various SPAN agent types differ in their mirror targets (i.e., physical port netdev vs. VLAN netdev) and the encapsulation headers that they need to encapsulate the mirrored packets with. The Spectrum-2 and Spectrum-3 ASICs support a SPAN agent type that is able to mirror towards the CPU, whereas the Spectrum-1 ASIC does not. Prepare for the addition of this new SPAN agent type by splitting the SPAN agent operations to be per-ASIC. Reviewed-by:
-
Amit Cohen authored
Allow setting mirroring_pid_base using MOGCR register. Signed-off-by:
-
Amit Cohen authored
Allow setting session_id and pid as part of port analyzer configurations. Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. No GFP_ flag needs to be corrected. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'init_shared_mem()' GFP_KERNEL can be used because this flag is already used to allocate some memory in this function. While at it, update some debug message to match the new function names. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'lan743x_tx_ring_cleanup()' and 'lan743x_rx_ring_init()', GFP_KERNEL can be used because this flag is already used to allocate some memory in these functions. While at it, remove a useless (void *) casting in the first hunk in so that the code is more consistent. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== bridge: mrp: Add support for interconnect ring This patch series extends existing MRP to add support for interconnect ring. An interconnect ring is a ring that connects 2 rings. In this way is possible to connect multiple rings. Each interconnect ring is form of 4 nodes, in which 3 have the role MIC(Media Redundancy Interconnect Client) and one has the role MIM(Media Redundancy Interconnect Manager). All these nodes need to have the same ID and the ID needs to be unique between multiple interconnect rings. And 2 nodes needs to be part of one ring and the other 2 nodes needs to be part of the other ring that is connected. +---------+ | | +----------| MRM |---------------+ | | | | | +---------+ | | | | | | | +--------------+ +-----------------+ | | | | | MRC/MIC |------------------| MRC/MIM | | | | | +--------------+ +-----------------+ | | |Interconnect port |Interconnect port | | | | +--------------+ +-----------------+ | | | | | MRC/MIC |----------------- | MRC/MIC | | | | | +--------------+ +-----------------+ | | | | | +---------+ | | | | | +----------| MRM |----------------+ | | +---------+ Each node in a ring needs to have one of the following ring roles, MRM or MRC. And it can also have an interconnect role like MIM or MIC if it is part of an interconnect ring. In the figure above the MRM doesn't have any interconnect role but the MRC from the top ring have the interconnect roles MIC respectively MIM. Therefore it is not possible for a node to have only an interconnect role. There are 2 ways for interconnect ring to detect when is open or closed: 1. To use CCM frames on the interconnect port to detect when the interconnect link goes down/up. This mode is called LC-mode. 2. To send InTest frames on all 3 ports(2 ring ports and 1 interconnect port) and detect when these frames are received back. This mode is called RC-mode. This patch series adds support only for RC-mode. Where MIM sends InTest frames on all 3 ports and detects when it receives back the InTest. When it receives the InTest it means that the ring is closed so it would set the interconnect port in blocking state. If it stops receiving the InTest frames then it would set the port in forwarding state and it would send InTopo frames. These InTopo frames will be received by MRM nodes and process them. And then the MRM will send Topo frames in the rings so each client will clear its FDB. v4: - always cancel delay work if the MRP instance is deleted or interconnect role is disabled but allow only to start to send InTest frames only if the role is MIM. v3: - update 'br_mrp_set_in_role' to stop sending test if the role is disabled and don't allow to set a different interconnect port if there is already one. v2: - rearrange structures not to contain holes - stop sending MRP_InTest frames when the MRP instance is deleted ==================== Signed-off-by: -
Horatiu Vultur authored
This patch adds a new port attribute, IFLA_BRPORT_MRP_IN_OPEN, which allows to notify the userspace when the node lost the contiuity of MRP_InTest frames. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Horatiu Vultur authored
This patch extends the function br_mrp_fill_info to return also the status for the interconnect ring. Signed-off-by:
-
Horatiu Vultur authored
Extend the existing MRP_INFO to return status of MRP interconnect. In case there is no MRP interconnect on the node then the role will be disabled so the other attributes can be ignored. Signed-off-by:
-
Horatiu Vultur authored
This patch extends the existing MRP netlink interface with the following attributes: IFLA_BRIDGE_MRP_IN_ROLE, IFLA_BRIDGE_MRP_IN_STATE and IFLA_BRIDGE_MRP_START_IN_TEST. These attributes are similar with their ring attributes but they apply to the interconnect port. Signed-off-by:
-
Horatiu Vultur authored
Thie patch adds support for MRP Interconnect. Similar with the MRP ring, if the HW can't generate MRP_InTest frames, then the SW will try to generate them. And if also the SW fails to generate the frames then an error is return to userspace. The forwarding/termination of MRP_In frames is happening in the kernel and is done by MRP instances. Signed-off-by:
-
Horatiu Vultur authored
Implement the MRP API for interconnect switchdev. Similar with the other br_mrp_switchdev function, these function will just eventually call the switchdev functions: switchdev_port_obj_add/del. Signed-off-by:
-
Horatiu Vultur authored
This function notifies the userspace when the node lost the continuity of MRP_InTest frames. Signed-off-by:
-
Horatiu Vultur authored
This patch renames the function br_mrp_port_open to br_mrp_ring_port_open. In this way is more clear that a ring port lost the continuity because there will be also a br_mrp_in_port_open. Signed-off-by:
-
Horatiu Vultur authored
This patch extends the 'struct br_mrp' to contain information regarding the MRP interconnect. It contains the following: - the interconnect port 'i_port', which is NULL if the node doesn't have a interconnect role - the interconnect id, which is similar with the ring id, but this field is also part of the MRP_InTest frames. - the interconnect role, which can be MIM or MIC. - the interconnect state, which can be open or closed. - the interconnect delayed_work for sending MRP_InTest frames and check for lost of continuity. Signed-off-by:
-
Horatiu Vultur authored
This patch adds a new flag(BR_MRP_LOST_IN_CONT) to the net bridge ports. This bit will be set when the port lost the continuity of MRP_InTest frames. Signed-off-by:
-
Horatiu Vultur authored
Extend the existing MRP netlink attributes to allow to configure MRP Interconnect: IFLA_BRIDGE_MRP_IN_ROLE - the parameter type is br_mrp_in_role which contains the interconnect id, the ring id, the interconnect role(MIM or MIC) and the port ifindex that represents the interconnect port. IFLA_BRIDGE_MRP_IN_STATE - the parameter type is br_mrp_in_state which contains the interconnect id and the interconnect state. IFLA_BRIDGE_MRP_IN_TEST - the parameter type is br_mrp_start_in_test which contains the interconnect id, the interval at which to send MRP_InTest frames, how many test frames can be missed before declaring the interconnect ring open and the period which represents for how long to send MRP_InTest frames. Signed-off-by:
-
Horatiu Vultur authored
Extend switchdev API to add support for MRP interconnect. The HW is notified in the following cases: SWITCHDEV_OBJ_ID_IN_ROLE_MRP: This is used when the interconnect role of the node changes. The supported roles are MIM and MIC. SWITCHDEV_OBJ_ID_IN_STATE_MRP: This is used when the interconnect ring changes it states to open or closed. SWITCHDEV_OBJ_ID_IN_TEST_MRP: This is used to start/stop sending MRP_InTest frames on all MRP ports. This is called only on nodes that have the interconnect role MIM. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-13 The following pull-request contains BPF updates for your *net-next* tree. We've added 36 non-merge commits during the last 7 day(s) which contain a total of 62 files changed, 2242 insertions(+), 468 deletions(-). The main changes are: 1) Avoid trace_printk warning banner by switching bpf_trace_printk to use its own tracing event, from Alan. 2) Better libbpf support on older kernels, from Andrii. 3) Additional AF_XDP stats, from Ciara. 4) build time resolution of BTF IDs, from Jiri. 5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav. ==================== Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'pcnet32_realloc_tx_ring()' and 'pcnet32_realloc_rx_ring()', GFP_ATOMIC must be used because a spin_lock is hold. The call chain is: pcnet32_set_ringparam ** spin_lock_irqsave(&lp->lock, flags); --> pcnet32_realloc_tx_ring --> pcnet32_realloc_rx_ring ** spin_unlock_irqrestore(&lp->lock, flags); When memory is in 'pcnet32_probe1()' and 'pcnet32_alloc_ring()', GFP_KERNEL can be used. While at it, update a few comments and pr_err messages to be more in line with the new function names. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'amd8111e_init_ring()', GFP_ATOMIC must be used because a spin_lock is hold. One of the call chains is: amd8111e_open ** spin_lock_irq(&lp->lock); --> amd8111e_restart --> amd8111e_init_ring ** spin_unlock_irq(&lp->lock); The rest of the patch is produced by coccinelle with a few adjustments to please checkpatch.pl. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
David S. Miller authored
Vladimir Oltean says: ==================== New DSA driver for VSC9953 Seville switch Looking at the Felix and Ocelot drivers, Maxim asked if it would be possible to use them as a base for a new driver for the Seville switch inside NXP T1040. Turns out, it is! The result is that the mscc_felix driver was extended to probe on Seville. The biggest challenge seems to be getting register read/write API generic enough to cover such wild bitfield variations between hardware generations. Currently, both felix and seville are built under the same kernel config option (NET_DSA_MSCC_FELIX). This has both some advantages (no need to duplicate the Lynx PCS code from felix_vsc9959.c) and some disadvantages (Seville needs to depend on PCI and on ENETC_MDIO). This will be further refined as time progresses. The driver has been completely reviewed. Previous submission was here, it wasn't accepted due to a conflict with Mark Brown's tree, very late in the release cycle: https://patchwork.ozlabs.org/project/netdev/cover/20200531122640.1375715-1-olteanv@gmail.com/ So this is more of a repost, with the only changes being related to rebasing on top of the cleanup I had to do in Ocelot. ==================== Signed-off-by:
-
Vladimir Oltean authored
There are no non-standard bindings being used. However Felix is a PCI device and Seville is a platform device. So give an example of device tree for this switch and document its compatible string. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Maxim Kochetkov authored
This is another switch from Vitesse / Microsemi / Microchip, that has 10 ports (8 external, 2 internal) and is integrated into the Freescale / NXP T1040 PowerPC SoC. It is very similar to Felix from NXP LS1028A, except that this is a platform device and Felix is a PCI device, and it doesn't support IEEE 1588 and TSN. Like Felix, this driver configures its own PCS on the internal MDIO bus using a phy_device abstraction for it (yes, it will be refactored to use a raw mdio_device, like other phylink drivers do, but let's keep it like that for now). But unlike Felix, the MDIO bus and the PCS are not from the same vendor. The PCS is the same QorIQ/Layerscape PCS as found in Felix/ENETC/DPAA*, but the internal MDIO bus that is used to access it is actually an instantiation of drivers/net/phy/mdio-mscc-miim.c. But it would be difficult to reuse that driver (it doesn't even use regmap, and it's less than 200 lines of code), so we hand-roll here some internal MDIO bus accessors within seville_vsc9953.c, which serves the purpose of driving the PCS absolutely fine. Also, same as Felix, the PCS doesn't support dynamic reconfiguration of SerDes protocol, so we need to do pre-validation of PHY mode from device tree and not let phylink change it. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by:
-
Maxim Kochetkov authored
The ocelot_wm_encode function deals with setting thresholds for pause frame start and stop. In Ocelot and Felix the register layout is the same, but for Seville, it isn't. The easiest way to accommodate Seville hardware configuration is to introduce a function pointer for setting this up. Signed-off-by:
-
Maxim Kochetkov authored
Seville has a different bitwise layout than Ocelot and Felix. Signed-off-by:
-
Vladimir Oltean authored
The Ocelot switches do not support flow control on Ethernet interfaces where a DSA tag must be added. If pause frames are enabled, they will be encapsulated in the DSA tag just like regular frames, and the DSA master will not recognize them. Signed-off-by:
-
Vladimir Oltean authored
We don't want ocelot_port_set_maxlen to enable pause frame TX, just to adjust the pause thresholds. Move the unconditional enabling of pause TX to ocelot_init_port. There is no good place to put such setting because it shouldn't be unconditional. But at the moment it is, we're not changing that. Signed-off-by:
-
