- 22 Jul, 2022 1 commit
-
-
shaomin Deng authored
Remove the rebundant word "in" in comments. Signed-off-by:
shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220721150528.22099-1-dengshaomin@cdjrlc.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 15 Jul, 2022 11 commits
-
-
Takashi Iwai authored
This reverts commit 980b3a87. The commit didn't consider the fact that ASoC hdac-hda driver initializes the HD-audio stuff without calling snd_hda_codec_device_init(). Hence this caused a regression leading to Oops. Revert the commit to restore the behavior. Fixes: 980b3a87 ("ALSA: hda: Fix page fault in snd_hda_codec_shutdown()") Link: https://lore.kernel.org/r/3c40df55-3aee-1e08-493b-7b30cd84dc00@linux.intel.com Link: https://lore.kernel.org/r/20220715182903.19594-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Since the recent change in CS35L41 codec requires the reference of acpi_dev handle, the current Kconfig may lead to a build breakage. Revert the Kconfig change and re-introduce the hard dependency on CONFIG_ACPI again as a temporary workaround. Fixes: eef37596 ("ALSA: hda: cs35l41: Support reading subsystem id from ACPI") Link: https://lore.kernel.org/r/20220715182427.18891-1-tiwai@suse.deSigned-off-by:
-
Cezary Rojewski authored
When codec is unbound but not yet removed, in the eyes of snd_hdac_bus_process_unsol_events() it is still a valid target to delegate work to. Such behaviour may lead to use-after-free errors. Address by verifying if codec is actually registered. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220706120230.427296-6-cezary.rojewski@intel.comSigned-off-by:
-
Stefan Binding authored
By default, the driver will automatically load DSP firmware for the amps, if available. Adding this option allows the autoload to be optional, which allows for different configurations. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220630002335.366545-15-vitalyr@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
This is required to support CS35L41 calibration. By default, speaker protection firmware will be loaded, if available. However, different firmware is required to run the calibration sequence, so it is necessary to add support to be able to unload, switch and reload firmware. This patch adds 2 ALSA Controls for each amp: "DSP1 Firmware Load" "DSP1 Firmware Type" "DSP1 Firmware Load" can be used to unload and load the firmware. "DSP1 Firmware Type" can be used to switch the target firmware to be loaded by "DSP1 Firmware Load" Since loading firmware can add new ALSA controls, it is necessary to ensure the firmware loading is run asynchronously from the ALSA control itself to prevent deadlocks. Note: When switching between firmwares, an ALSA control is only added if it has not previously existed. If it had existed previously, it will be re-enabled instead. Signed-off-by:
-
Stefan Binding authored
The config sequences for running with and without firmware and DSP are different. The original behavior assumed that we would only run without DSP only in the case where firmware load failed. This meant the non-firmware sequence was written with the assumtion that various registers would be set to their default value. However, to support the ability to unload the firmware, the non-firmware register sequence must be updated to update all required registers, including values that would be defaulted, in case the firmware sequence, which could have already run, has changed their value. Signed-off-by:
-
Stefan Binding authored
This will be used to define the firmware names. Signed-off-by:
-
Stefan Binding authored
Speaker Calibration data, specific to an individual speaker is stored inside UEFI variables during calibration, and can be used by the DSP. Signed-off-by:
-
Stefan Binding authored
CS35L41 supports hibernation during suspend when using DSP firmware. When the driver suspends it will hibernate the part, if firmware is running, and resume will wake from hibernation. CS35L41 driver will suspend/resume when requested by hda driver. Note that suspend/resume and hibernation is only supported when firmware is running. Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v5.20 This is a big release thus far and there will probably be more changes to come, it's a combination of a larger than usual crop of new drivers and some subsysetm wide cleanups from Charles rather than anything structural. The SOF and Intel DSP code both also continue to be very actively developed. - Restructing of the set_fmt() callbacks to be specified in terms of the device rather than with semantics depending on if the device is supposed to be a CODEC or SoC, making things clearer in situations like CODEC to CODEC links. - Clean up of the way we flag which DAI naming scheme we use to reflect the progress that's been made modernising things. - Merge of more of the Intel AVS driver stack, including some board integrations. - New version 4 mechanism for communication with SOF DSPs. - Suppoort for dynamically selecting the PLL to use at runtime on i.MX platforms. - Improvements for CODEC to CODEC support in the generic cards. - Support for AMD Jadeite and various machines, Intel MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments TAS2780.
-
Zheyu Ma authored
When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb(). Fixes: b47a2229 ("ALSA: MIDI driver for Behringer BCD2000 USB device") Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220715010515.2087925-1-zheyuma97@gmail.comSigned-off-by:
-
- 14 Jul, 2022 13 commits
-
-
Mark Brown authored
Needed for further development.
-
Kuninori Morimoto authored
Before, ssiu.c didn't care SSI5-8, thus, commit b1384d4c ("ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()") cares it for status clear. But we should care it for error irq handling, too. This patch cares it. Reported-by:
Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com> Reported-by:
Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
There are two bugs that have to do with when we copy the payload: size = simple_write_to_buffer(ipc4_msg->data_ptr, priv->max_msg_size, ppos, buffer, count); The value of "*ppos" was supposed to be zero but it is sizeof(ipc4_msg->header_u64) so it will copy the data into the middle of the "ipc4_msg->data_ptr" buffer instead of to the start. The second problem is "buffer" should be "buffer + sizeof(ipc4_msg->header_u64)". This function is used for fuzz testing so the data is normally random and this bug likely does not affect anyone very much. In this context, it's simpler and more appropriate to use copy_from_user() instead of simple_write_to_buffer() so I have re-written the function. Fixes: 066c6762 ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Ysg1tB2FKLnRMsel@kiliSigned-off-by:
-
Mark Brown authored
The version of the BCLK pinctrl management changes that made it into v5.19 has caused problems on some systems due to overly strict DT requirements but attempts to fix it have caused further breakage on other platforms. Just drop the changes for this release, we already have a better version queued for -next. Fixes: 26b9f2fa ("ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found") Fixes: a5450aba ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by:
-
Stefan Binding authored
Some Laptops use a number of gpios to define which vendor is used for a particular laptop. Different coefficient files are used for different vendors. Signed-off-by:
-
Stefan Binding authored
To be able to support different firmwares and tuning for different models, the driver needs to be able to load a different firmware and coefficient file based on its Subsystem ID. The driver attempts to load the firmware in the following order: /lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>-dev<#>.wmfw /lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>.wmfw /lib/firmware/cirrus/cs35l41-dsp1-<fw-type>.wmfw Signed-off-by:
-
Stefan Binding authored
On some laptop models, the ACPI contains the unique Subsystem ID, and this value should be preferred over the value from the HDA driver. Signed-off-by:
-
Stefan Binding authored
The Subsystem ID is read from the HDA driver, and will be used by the CS35L41 driver to be able to uniquely identify the laptop, which is required to be able to define firmware to be used by specific models. Signed-off-by:
-
Vitaly Rodionov authored
This patch adds support for the CS35L41 DSP. The DSP allows for extra features, such as running speaker protection algorithms and hibernations. To utilize these features, the driver must load firmware into the DSP, as well as various tuning files which allow for customization for specific models. [ Slightly simplified Kconfig changes by tiwai ] Signed-off-by:
Vitaly Rodionov <vitaly.rodionov@cirrus.com> Signed-off-by:
-
Stefan Binding authored
This is required for ALSA control support. Signed-off-by:
-
Stefan Binding authored
DSP controls are exposed as ALSA controls, however, some of these controls are required to be accessed by the driver. Add apis which allow read/write of these controls. The write api will also notify the ALSA control on value change. Signed-off-by:
-
Stefan Binding authored
The cs35l41 part contains a DSP which is able to run firmware. The cs_dsp library can be used to control the DSP. These controls can be exposed to userspace using ALSA controls. This library adds apis to be able to interface between cs_dsp and hda drivers and expose the relevant controls as ALSA controls. [ Note: the dependency of CONFIG_SND_HDA_CS_DSP_CONTROLS Kconfig is corrected. Also, this Kconfig isn't enabled now but will be actually enabled in a later patch -- tiwai ] Signed-off-by:
-
Uros Bizjak authored
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old in ep_state_update. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). No functional change intended. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20220713151946.4743-1-ubizjak@gmail.comSigned-off-by:
-
- 13 Jul, 2022 15 commits
-
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: For SOF IPC4, we need to set pipeline state in BE DAI trigger.
-
Bard Liao authored
For IPC4, we need to set pipeline state in BE DAI trigger. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220708061312.25878-3-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Bard Liao authored
When a pipeline is split into FE and BE parts, the BE pipeline may need to be triggered separately in the BE trigger op. So add the trigger callback in the link_res ops that will be invoked during BE DAI trigger. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220708061312.25878-2-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Liang He authored
In mt6359_parse_dt() and mt6359_accdet_parse_dt(), we should call of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 68353028 ("ASoC: mt6359: fix failed to parse DT properties") Fixes: eef07b9e ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver") Signed-off-by:
Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220713102013.367336-1-windhl@126.comSigned-off-by:
-
Randy Dunlap authored
Since SND_SOC_ES8316 has a hard dependency on I2C and since 'select' does not follow any dependency chains, SND_SOC_AMD_ST_ES8336_MACH also needs to have a hard dependency on I2C. Fixes a kconfig warning and subsequent build errors: WARNING: unmet direct dependencies detected for SND_SOC_ES8316 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=n] Selected by [y]: - SND_SOC_AMD_ST_ES8336_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP [=y] && ACPI [=y] && (I2C [=n] || COMPILE_TEST [=y]) sound/soc/codecs/es8316.c:866:1: warning: data definition has no type or storage class 866 | module_i2c_driver(es8316_i2c_driver); sound/soc/codecs/es8316.c:866:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] sound/soc/codecs/es8316.c:866:1: warning: parameter names (without types) in function declaration sound/soc/codecs/es8316.c:857:26: warning: ‘es8316_i2c_driver’ defined but not used [-Wunused-variable] 857 | static struct i2c_driver es8316_i2c_driver = { Fixes: f94fa840 ("ASoC: amd: enable machine driver build for Jadeite platform") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20220712183348.31046-1-rdunlap@infradead.orgSigned-off-by:
-
Liang He authored
We should call of_node_put() for the reference before its replacement as it returned by of_get_parent() which has increased the refcount. Besides, we should also call of_node_put() before return. Fixes: c8c74939 ("ASoC: audio-graph-card2: add Multi CPU/Codec support") Signed-off-by:
-
Dan Carpenter authored
The "gpio_pa" pointer is an error pointer, there is no need to try put it. Calling gpiod_put() on it will lead to an error pointer dereference. Fixes: 02527c3f ("ASoC: amd: add Machine driver for Jadeite platform") Signed-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for the remaining ALSA core API functions. Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for memory allocation helpers. Link: https://lore.kernel.org/r/20220713104759.4365-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value in proper format. This patch adds or fixes the missing entries for control API. Link: https://lore.kernel.org/r/20220713104759.4365-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value and the summary for each struct / enum in a proper format. This patch adds or fixes the missing entries for compress-offload API. Link: https://lore.kernel.org/r/20220713104759.4365-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for PCM dmaengine API. Link: https://lore.kernel.org/r/20220713104759.4365-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for PCM API. Link: https://lore.kernel.org/r/20220713104759.4365-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The exported functions snd_compress_new() and snd_compr_stop_error() had already kernel-doc-style comments but they were not processed as they weren't marked properly. Let's enable them. This patch also fixes the missing argument id for snd_compress_new comments, too. Reported-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/3cd6b93b36b32ad6ae160931aaa00b20688e241a.1656759989.git.mchehab@kernel.org Link: https://lore.kernel.org/r/20220713104759.4365-2-tiwai@suse.deSigned-off-by:
-
Andy Shevchenko authored
Selections can be propagated via selections, while dependencies are not. Hence, consolidate selections under the SND_HDA_SCODEC_CS35L41 option. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220712153519.35692-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
