- 08 Jun, 2018 40 commits
-
-
Mike Rapoport authored
Commit 9f32624b ("mm/rmap: use rmap_walk() in page_referenced()") removed the declaration of page_referenced_ksm for the case CONFIG_KSM=y, but left one for CONFIG_KSM=n. Remove the unused leftover. Link: http://lkml.kernel.org/r/1524552106-7356-2-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Omar Sandoval authored
While revisiting my Btrfs swapfile series [1], I introduced a situation in which reclaim would lock i_rwsem, and even though the swapon() path clearly made GFP_KERNEL allocations while holding i_rwsem, I got no complaints from lockdep. It turns out that the rework of the fs_reclaim annotation was broken: if the current task has PF_MEMALLOC set, we don't acquire the dummy fs_reclaim lock, but when reclaiming we always check this _after_ we've just set the PF_MEMALLOC flag. In most cases, we can fix this by moving the fs_reclaim_{acquire,release}() outside of the memalloc_noreclaim_{save,restore}(), althought kswapd is slightly different. After applying this, I got the expected lockdep splats. 1: https://lwn.net/Articles/625412/ Link: http://lkml.kernel.org/r/9f8aa70652a98e98d7c4de0fc96a4addcee13efe.1523778026.git.osandov@fb.com Fixes: d92a8cfc ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by:Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Yang Shi authored
Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Suggested-by:
Christoph Hellwig <hch@infradead.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chintan Pandya authored
Client can call vunmap with some intermediate 'addr' which may not be the start of the VM area. Entire unmap code works with vm->vm_start which is proper but debug object API is called with 'addr'. This could be a problem within debug objects. Pass proper start address into debug object API. [akpm@linux-foundation.org: fix warning] Link: http://lkml.kernel.org/r/1523961828-9485-3-git-send-email-cpandya@codeaurora.orgSigned-off-by:
Chintan Pandya <cpandya@codeaurora.org> Reviewed-by:
-
Chintan Pandya authored
Currently, __vunmap flow is, 1) Release the VM area 2) Free the debug objects corresponding to that vm area. This leave some race window open. 1) Release the VM area 1.5) Some other client gets the same vm area 1.6) This client allocates new debug objects on the same vm area 2) Free the debug objects corresponding to this vm area. Here, we actually free 'other' client's debug objects. Fix this by freeing the debug objects first and then releasing the VM area. Link: http://lkml.kernel.org/r/1523961828-9485-2-git-send-email-cpandya@codeaurora.orgSigned-off-by: -
Chintan Pandya authored
vunmap does page table clear operations twice in the case when DEBUG_PAGEALLOC_ENABLE_DEFAULT is enabled. So, clean up the code as that is unintended. As a perf gain, we save few us. Below ftrace data was obtained while doing 1 MB of vmalloc/vfree on ARM64 based SoC *without* this patch applied. After this patch, we can save ~3 us (on 1 extra vunmap_page_range). CPU DURATION FUNCTION CALLS | | | | | | | 6) | __vunmap() { 6) | vmap_debug_free_range() { 6) 3.281 us | vunmap_page_range(); 6) + 45.468 us | } 6) 2.760 us | vunmap_page_range(); 6) ! 505.105 us | } [cpandya@codeaurora.org: v3] Link: http://lkml.kernel.org/r/1525176960-18408-1-git-send-email-cpandya@codeaurora.org Link: http://lkml.kernel.org/r/1523876342-10545-1-git-send-email-cpandya@codeaurora.orgSigned-off-by: -
Wei Yang authored
In commit c4e1be9e ("mm, sparsemem: break out of loops early") __highest_present_section_nr is introduced to reduce the loop counts for present section. This is also helpful for usemap and memmap allocation. This patch uses __highest_present_section_nr + 1 to optimize the loop. Link: http://lkml.kernel.org/r/20180326081956.75275-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
-
Wei Yang authored
When searching a present section, there are two boundaries: * __highest_present_section_nr * NR_MEM_SECTIONS And it is known, __highest_present_section_nr is a more strict boundary than NR_MEM_SECTIONS. This means it would be necessary to check __highest_present_section_nr only. Link: http://lkml.kernel.org/r/20180326081956.75275-2-richard.weiyang@gmail.comSigned-off-by:David Rientjes <rientjes@google.com> Reviewed-by:
-
Huang Ying authored
mmap_sem will be read locked when calling follow_pmd_mask(). But this cannot prevent PMD from being changed for all cases when PTL is unlocked, for example, from pmd_trans_huge() to pmd_none() via MADV_DONTNEED. So it is possible for the pmd_present() check in follow_pmd_mask() to encounter an invalid PMD. This may cause an incorrect VM_BUG_ON() or an infinite loop. Fix this by reading the PMD entry into a local variable with READ_ONCE() and checking the local variable and pmd_none() in the retry loop. As Kirill pointed out, with PTL unlocked, the *pmd may be changed under us, so reading it directly again and again may incur weird bugs. So although using *pmd directly other than for pmd_present() checking may be safe, it is still better to replace them to read *pmd once and check the local variable multiple times. When PTL unlocked, replace all *pmd with local variable was suggested by Kirill. Link: http://lkml.kernel.org/r/20180419083514.1365-1-ying.huang@intel.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Reviewed-by:
Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Roman Gushchin authored
Refine cgroup v2 docs after latest memory.low changes. Link: http://lkml.kernel.org/r/20180405185921.4942-4-guro@fb.comSigned-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Roman Gushchin authored
If memcg's usage is equal to the memory.low value, avoid reclaiming from this cgroup while there is a surplus of reclaimable memory. This sounds more logical and also matches memory.high and memory.max behavior: both are inclusive. Empty cgroups are not considered protected, so MEMCG_LOW events are not emitted for empty cgroups, if there is no more reclaimable memory in the system. Link: http://lkml.kernel.org/r/20180406122132.GA7185@castleSigned-off-by:
-
Roman Gushchin authored
This patch aims to address an issue in current memory.low semantics, which makes it hard to use it in a hierarchy, where some leaf memory cgroups are more valuable than others. For example, there are memcgs A, A/B, A/C, A/D and A/E: A A/memory.low = 2G, A/memory.current = 6G //\\ BC DE B/memory.low = 3G B/memory.current = 2G C/memory.low = 1G C/memory.current = 2G D/memory.low = 0 D/memory.current = 2G E/memory.low = 10G E/memory.current = 0 If we apply memory pressure, B, C and D are reclaimed at the same pace while A's usage exceeds 2G. This is obviously wrong, as B's usage is fully below B's memory.low, and C has 1G of protection as well. Also, A is pushed to the size, which is less than A's 2G memory.low, which is also wrong. A simple bash script (provided below) can be used to reproduce the problem. Current results are: A: 1430097920 A/B: 711929856 A/C: 717426688 A/D: 741376 A/E: 0 To address the issue a concept of effective memory.low is introduced. Effective memory.low is always equal or less than original memory.low. In a case, when there is no memory.low overcommittment (and also for top-level cgroups), these two values are equal. Otherwise it's a part of parent's effective memory.low, calculated as a cgroup's memory.low usage divided by sum of sibling's memory.low usages (under memory.low usage I mean the size of actually protected memory: memory.current if memory.current < memory.low, 0 otherwise). It's necessary to track the actual usage, because otherwise an empty cgroup with memory.low set (A/E in my example) will affect actual memory distribution, which makes no sense. To avoid traversing the cgroup tree twice, page_counters code is reused. Calculating effective memory.low can be done in the reclaim path, as we conveniently traversing the cgroup tree from top to bottom and check memory.low on each level. So, it's a perfect place to calculate effective memory low and save it to use it for children cgroups. This also eliminates a need to traverse the cgroup tree from bottom to top each time to check if parent's guarantee is not exceeded. Setting/resetting effective memory.low is intentionally racy, but it's fine and shouldn't lead to any significant differences in actual memory distribution. With this patch applied results are matching the expectations: A: 2147930112 A/B: 1428721664 A/C: 718393344 A/D: 815104 A/E: 0 Test script: #!/bin/bash CGPATH="/sys/fs/cgroup" truncate /file1 --size 2G truncate /file2 --size 2G truncate /file3 --size 2G truncate /file4 --size 50G mkdir "${CGPATH}/A" echo "+memory" > "${CGPATH}/A/cgroup.subtree_control" mkdir "${CGPATH}/A/B" "${CGPATH}/A/C" "${CGPATH}/A/D" "${CGPATH}/A/E" echo 2G > "${CGPATH}/A/memory.low" echo 3G > "${CGPATH}/A/B/memory.low" echo 1G > "${CGPATH}/A/C/memory.low" echo 0 > "${CGPATH}/A/D/memory.low" echo 10G > "${CGPATH}/A/E/memory.low" echo $$ > "${CGPATH}/A/B/cgroup.procs" && vmtouch -qt /file1 echo $$ > "${CGPATH}/A/C/cgroup.procs" && vmtouch -qt /file2 echo $$ > "${CGPATH}/A/D/cgroup.procs" && vmtouch -qt /file3 echo $$ > "${CGPATH}/cgroup.procs" && vmtouch -qt /file4 echo "A: " `cat "${CGPATH}/A/memory.current"` echo "A/B: " `cat "${CGPATH}/A/B/memory.current"` echo "A/C: " `cat "${CGPATH}/A/C/memory.current"` echo "A/D: " `cat "${CGPATH}/A/D/memory.current"` echo "A/E: " `cat "${CGPATH}/A/E/memory.current"` rmdir "${CGPATH}/A/B" "${CGPATH}/A/C" "${CGPATH}/A/D" "${CGPATH}/A/E" rmdir "${CGPATH}/A" rm /file1 /file2 /file3 /file4 Link: http://lkml.kernel.org/r/20180405185921.4942-2-guro@fb.comSigned-off-by: -
Roman Gushchin authored
This patch renames struct page_counter fields: count -> usage limit -> max and the corresponding functions: page_counter_limit() -> page_counter_set_max() mem_cgroup_get_limit() -> mem_cgroup_get_max() mem_cgroup_resize_limit() -> mem_cgroup_resize_max() memcg_update_kmem_limit() -> memcg_update_kmem_max() memcg_update_tcp_limit() -> memcg_update_tcp_max() The idea behind this renaming is to have the direct matching between memory cgroup knobs (low, high, max) and page_counters API. This is pure renaming, this patch doesn't bring any functional change. Link: http://lkml.kernel.org/r/20180405185921.4942-1-guro@fb.comSigned-off-by:
-
Stefan Agner authored
So far code was using ULLONG_MAX and type casting to obtain a phys_addr_t with all bits set. The typecast is necessary to silence compiler warnings on 32-bit platforms. Use the simpler but still type safe approach "~(phys_addr_t)0" to create a preprocessor define for all bits set. Link: http://lkml.kernel.org/r/20180406213809.566-1-stefan@agner.chSigned-off-by:
Stefan Agner <stefan@agner.ch> Suggested-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
Laurent Dufour authored
Remove the additional define HAVE_PTE_SPECIAL and rely directly on CONFIG_ARCH_HAS_PTE_SPECIAL. There is no functional change introduced by this patch Link: http://lkml.kernel.org/r/1523533733-25437-1-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
-
Laurent Dufour authored
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
-
Wei Yang authored
Highmem's realsize always equals to freesize, so it is not necessary to spare a variable to record this. Link: http://lkml.kernel.org/r/20180413083859.65888-1-richard.weiyang@gmail.comSigned-off-by:
-
Mike Kravetz authored
With the addition of memfd hugetlbfs support, we now have the situation where memfd depends on TMPFS -or- HUGETLBFS. Previously, memfd was only supported on tmpfs, so it made sense that the code resided in shmem.c. In the current code, memfd is only functional if TMPFS is defined. If HUGETLFS is defined and TMPFS is not defined, then memfd functionality will not be available for hugetlbfs. This does not cause BUGs, just a lack of potentially desired functionality. Code is restructured in the following way: - include/linux/memfd.h is a new file containing memfd specific definitions previously contained in shmem_fs.h. - mm/memfd.c is a new file containing memfd specific code previously contained in shmem.c. - memfd specific code is removed from shmem_fs.h and shmem.c. - A new config option MEMFD_CREATE is added that is defined if TMPFS or HUGETLBFS is defined. No functional changes are made to the code: restructuring only. Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Mike Kravetz authored
In preparation for memfd code restructure, update comments, definitions and function names dealing with file sealing to indicate that tmpfs and hugetlbfs are the supported filesystems. Also, change file pointer checks in memfd_file_seals_ptr to use defined interfaces instead of directly referencing file_operation structs. Link: http://lkml.kernel.org/r/20180415182119.4517-3-mike.kravetz@oracle.comSigned-off-by:
-
Mike Kravetz authored
Patch series "restructure memfd code", v4. This patch (of 3): In preparation for memfd code restucture, clean up sparse warnings. Most changes required adding __rcu annotations. The routine find_swap_entry was modified to properly deference radix tree entries. Link: http://lkml.kernel.org/r/20180415182119.4517-2-mike.kravetz@oracle.comSigned-off-by:
Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by:
-
Minchan Kim authored
zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. Better idea is app developers free them directly rather than remaining them on heap. This patch tell us last access time of each block of zram via "cat /sys/kernel/debug/zram/zram0/block_state". The output is as follows, 300 75.033841 .wh 301 63.806904 s.. 302 63.806919 ..h First column is zram's block index and 3rh one represents symbol (s: same page w: written page to backing store h: huge page) of the block state. Second column represents usec time unit of the block was last accessed. So above example means the 300th block is accessed at 75.033851 second and it was huge so it was written to the backing store. Admin can leverage this information to catch cold|incompressible pages of process with *pagemap* once part of heaps are swapped out. I used the feature a few years ago to find memory hoggers in userspace to notify them what memory they have wasted without touch for a long time. With it, they could reduce unnecessary memory space. However, at that time, I hacked up zram for the feature but now I need the feature again so I decided it would be better to upstream rather than keeping it alone. I hope I submit the userspace tool to use the feature soon. [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: use ktime_get_boottime() instead of sched_clock()] Link: http://lkml.kernel.org/r/20180420063525.GA253739@rodete-desktop-imager.corp.google.com [akpm@linux-foundation.org: documentation tweak] [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: fix compile warning] Link: http://lkml.kernel.org/r/20180508104849.GA8209@rodete-desktop-imager.corp.google.com [rdunlap@infradead.org: fix printk formats] Link: http://lkml.kernel.org/r/3652ccb1-96ef-0b0b-05d1-f661d7733dcc@infradead.org Link: http://lkml.kernel.org/r/20180416090946.63057-5-minchan@kernel.orgSigned-off-by:Minchan Kim <minchan@kernel.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Minchan Kim authored
zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. Better idea is app developers free them directly rather than remaining them on heap. This patch records last access time of each block of zram so that With upcoming zram memory tracking, it could help userspace developers to reduce memory footprint. Link: http://lkml.kernel.org/r/20180416090946.63057-4-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
Mark incompressible pages so that we could investigate who is the owner of the incompressible pages once the page is swapped out via using upcoming zram memory tracker feature. With it, we could prevent such pages to be swapped out by using mlock. Otherwise we might remove them. This patch exposes new stat for huge pages via mm_stat. Link: http://lkml.kernel.org/r/20180416090946.63057-3-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
Patch series "zram memory tracking", v5. zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. As well, it's pointless to store incompressible pages to zram so better idea is app developers manages them directly like free or mlock rather than remaining them on heap. This patch provides a debugfs /sys/kernel/debug/zram/zram0/block_state to represent each block's state so admin can investigate what memory is cold|incompressible|same page with using pagemap once the pages are swapped out. The output is as follows: 300 75.033841 .wh 301 63.806904 s.. 302 63.806919 ..h First column is zram's block index and 3rh one represents symbol (s: same page w: written page to backing store h: huge page) of the block state. Second column represents usec time unit of the block was last accessed. So above example means the 300th block is accessed at 75.033851 second and it was huge so it was written to the backing store. This patch (of 4): ZRAM_ACCESS is used for locking a slot of zram so correct the name. It is also not a common flag to indicate status of the block so move the declare position on top of the flag. Lastly, let's move the function to the top of source code to be able to use it easily without forward declaration. Link: http://lkml.kernel.org/r/20180416090946.63057-2-minchan@kernel.orgSigned-off-by: -
Tejun Heo authored
Add swap max and fail events so that userland can monitor and respond to running out of swap. I'm not too sure about the fail event. Right now, it's a bit confusing which stats / events are recursive and which aren't and also which ones reflect events which originate from a given cgroup and which targets the cgroup. No idea what the right long term solution is and it could just be that growing them organically is actually the only right thing to do. Link: http://lkml.kernel.org/r/20180416231151.GI1911913@devbig577.frc2.facebook.comSigned-off-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
-
Tejun Heo authored
Patch series "mm, memcontrol: Implement memory.swap.events", v2. This patchset implements memory.swap.events which contains max and fail events so that userland can monitor and respond to swap running out. This patch (of 2): get_swap_page() is always followed by mem_cgroup_try_charge_swap(). This patch moves mem_cgroup_try_charge_swap() into get_swap_page() and makes get_swap_page() call the function even after swap allocation failure. This simplifies the callers and consolidates memcg related logic and will ease adding swap related memcg events. Link: http://lkml.kernel.org/r/20180416230934.GH1911913@devbig577.frc2.facebook.comSigned-off-by:
-
Yang Shi authored
mmap_sem is on the hot path of kernel, and it very contended, but it is abused too. It is used to protect arg_start|end and evn_start|end when reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make sense since those proc files just expect to read 4 values atomically and not related to VM, they could be set to arbitrary values by C/R. And, the mmap_sem contention may cause unexpected issue like below: INFO: task ps:14018 blocked for more than 120 seconds. Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ps D 0 14018 1 0x00000004 Call Trace: schedule+0x36/0x80 rwsem_down_read_failed+0xf0/0x150 call_rwsem_down_read_failed+0x18/0x30 down_read+0x20/0x40 proc_pid_cmdline_read+0xd9/0x4e0 __vfs_read+0x37/0x150 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xc5 Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock for them to mitigate the abuse of mmap_sem. So, introduce a new spinlock in mm_struct to protect the concurrent access to arg_start|end, env_start|end and others, as well as replace write map_sem to read to protect the race condition between prctl and sys_brk which might break check_data_rlimit(), and makes prctl more friendly to other VM operations. This patch just eliminates the abuse of mmap_sem, but it can't resolve the above hung task warning completely since the later access_remote_vm() call needs acquire mmap_sem. The mmap_sem scalability issue will be solved in the future. [yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock] Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
-
Baoquan He authored
In commit 3b0efdfa ("mm, sl[aou]b: Extract common fields from struct kmem_cache") the variable 'obj_size' was moved above, however the related code comment is not updated accordingly. Do it here. Link: http://lkml.kernel.org/r/20180603032402.27526-1-bhe@redhat.comSigned-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Canjiang Lu authored
The obsolete comment removed in this patch was introduced by 51df1142 ("slub: Dynamically size kmalloc cache allocations"). I paste related modification from that commit: +#ifdef CONFIG_NUMA + /* + * Allocate kmem_cache_node properly from the kmem_cache slab. + * kmem_cache_node is separately allocated so no need to + * update any list pointers. + */ + temp_kmem_cache_node = kmem_cache_node; + kmem_cache_node = kmem_cache_alloc(kmem_cache, GFP_NOWAIT); + memcpy(kmem_cache_node, temp_kmem_cache_node, kmem_size); + + kmem_cache_bootstrap_fixup(kmem_cache_node); + + caches++; +#else + /* + * kmem_cache has kmem_cache_node embedded and we moved it! + * Update the list heads + */ + INIT_LIST_HEAD(&kmem_cache->local_node.partial); + list_splice(&temp_kmem_cache->local_node.partial, &kmem_cache->local_node.partial); +#ifdef CONFIG_SLUB_DEBUG + INIT_LIST_HEAD(&kmem_cache->local_node.full); + list_splice(&temp_kmem_cache->local_node.full, &kmem_cache->local_node.full); +#endif As we can see there're used to distinguish the difference handling between NUMA/non-NUMA configuration in the original commit. I think it doesn't make any sense in current implementation which is placed above kmem_cache_node = bootstrap(&boot_kmem_cache_node); So maybe it's better to remove them now? Link: http://lkml.kernel.org/r/5af26f58.1c69fb81.1be0e.c520SMTPIN_ADDED_BROKEN@mx.google.comSigned-off-by:
Canjiang Lu <canjiang.lu@samsung.com> Acked-by:
-
Mathieu Malaterre authored
__printf is useful to verify format and arguments. Remove the following warning (with W=1): mm/slub.c:721:2: warning: function might be possible candidate for `gnu_printf' format attribute [-Wsuggest-attribute=format] Link: http://lkml.kernel.org/r/20180505200706.19986-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
-
Matthew Wilcox authored
__GFP_ZERO requests that the object be initialised to all-zeroes, while the purpose of a constructor is to initialise an object to a particular pattern. We cannot do both. Add a warning to catch any users who mistakenly pass a __GFP_ZERO flag when allocating a slab with a constructor. Link: http://lkml.kernel.org/r/20180412191322.GA21205@bombadil.infradead.org Fixes: d07dbea4 ("Slab allocators: support __GFP_ZERO in all allocators") Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
-
Sebastian Andrzej Siewior authored
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. One thing it does is to break the RT build. Link: http://lkml.kernel.org/r/20180504100319.11880-1-bigeasy@linutronix.deSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
Chengguang Xu authored
Currently when detecting invalid options in option parsing, some options(e.g. msize) just set errno and allow to continuously validate other options so that it can detect invalid options as much as possible and give proper error messages together. This patch applies same rule to option 'cache' and 'access' when detecting -EINVAL. Link: http://lkml.kernel.org/r/1525340676-34072-2-git-send-email-cgxu519@gmx.comSigned-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
Chengguang Xu authored
Currently when detecting invalid options in option parsing, some options(e.g. msize) just set errno and allow to continuously validate other options so that it can detect invalid options as much as possible and give proper error messages together. This patch applies same rule to option 'trans' and 'version' when detecting -EINVAL. Link: http://lkml.kernel.org/r/1525340676-34072-1-git-send-email-cgxu519@gmx.comSigned-off-by:
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f4220 ("mm: change return type to vm_fault_t") vmf_error() is the newly introduce inline function in 4.18. Fix one checkpatch.pl warning by replacing BUG_ON() with WARN_ON() [akpm@linux-foundation.org: undo BUG_ON->WARN_ON change] Link: http://lkml.kernel.org/r/20180523153258.GA28451@jordon-HP-15-Notebook-PCSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
-
Salvatore Mesoraca authored
Avoid a VLA by using a real constant expression instead of a variable. The compiler should be able to optimize the original code and avoid using an actual VLA. Anyway this change is useful because it will avoid a false positive with -Wvla, it might also help the compiler generating better code. Link: http://lkml.kernel.org/r/1520970710-19732-1-git-send-email-s.mesoraca16@gmail.comSigned-off-by:
Salvatore Mesoraca <s.mesoraca16@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Guozhonghua authored
Correct the comments position of the structure ocfs2_dir_block_trailer. Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA401071C5FDE@H3CMLB12-EX.srv.huawei-3com.comSigned-off-by:
guozhonghua <guozhonghua@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
Zhen Lei authored
The warning is invalid because the parameter chunksize passed from ocfs2_info_freefrag_scan_chain-->ocfs2_info_update_ffg is guaranteed to be positive. So __ilog2_u32 cannot return -1. fs/ocfs2/ioctl.c: In function 'ocfs2_info_update_ffg': fs/ocfs2/ioctl.c:411:17: warning: array subscript is below array bounds [-Warray-bounds] hist->fc_chunks[index]++; ^ fs/ocfs2/ioctl.c:411:17: warning: array subscript is below array bounds [-Warray-bounds] Link: http://lkml.kernel.org/r/1524655799-12112-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by:Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
-
Larry Chen authored
ocfs2_inode_lock_tracker as a variant of ocfs2_inode_lock, is used to prevent deadlock due to recursive lock acquisition. But this function does not distinguish whether the requested level is EX or PR. If a RP lock has been attained, this function will immediately return success afterwards even an EX lock is requested. But actually the return value does not mean that the process got a EX lock, because ocfs2_inode_lock has not been called. When taking lock levels into account, we face some different situations: 1. no lock is held In this case, just lock the inode and return 0 2. We are holding a lock For this situation, things diverges into several cases wanted holding what to do ex ex see 2.1 below ex pr see 2.2 below pr ex see 2.1 below pr pr see 2.1 below 2.1 lock level that is been held is compatible with the wanted level, so no lock action will be tacken. 2.2 Otherwise, an upgrade is needed, but it is forbidden. Reason why upgrade within a process is forbidden is that lock upgrade may cause dead lock. The following illustrate how it happens. process 1 process 2 ocfs2_inode_lock_tracker(ex=0) <====== ocfs2_inode_lock_tracker(ex=1) ocfs2_inode_lock_tracker(ex=1) For the status quo of ocfs2, without this patch, neither a bug nor end-user impact will be caused because the wrong logic is avoided. But I'm afraid this generic interface, may be called by other developers in future and used in this situation. a process ocfs2_inode_lock_tracker(ex=0) ocfs2_inode_lock_tracker(ex=1) Link: http://lkml.kernel.org/r/20180510053230.17217-1-lchen@suse.comSigned-off-by:Larry Chen <lchen@suse.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
Jia Guo authored
ocfs2_extend_allocation() has been deleted, clean up its declaration. Also change the static function name from __ocfs2_extend_allocation() to ocfs2_extend_allocation() to be consistent with the corresponding trace events as well as comments for ocfs2_lock_allocators(). Link: http://lkml.kernel.org/r/09cf7125-6f12-e53e-20f5-e606b2c16b48@huawei.com Fixes: 964f14a0 ("ocfs2: clean up some dead code") Signed-off-by:
Jia Guo <guojia12@huawei.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
