Set up uapi/asm/Kbuild.asm.  This requires the mandatory headers to be
dynamically detected.  The same goes for include/asm/Kbuild.asm.  The problem
is that the header files will be split or moved one at a time, but each header
file in Kbuild.asm's list applies to all arch headers of that name
simultaneously.

The dynamic detection of mandatory files can be undone later.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Fix a build failure in the x86 insn_sanity program after the UAPI split.  The
problem is that insn_sanity.c #includes arch/x86/lib/insn.c - which uses the
kernel string header.  This leads to conflicts for various definitions against
the /usr/include/ headers.

linux/string.h can be replaced with the normal userspace string.h if __KERNEL__
is not specified.

  HOSTCC  arch/x86/tools/insn_sanity
In file included from /data/fs/linux-2.6-hdr/include/linux/string.h:6:0,
                 from /data/fs/linux-2.6-hdr/arch/x86/lib/insn.c:21,
                 from arch/x86/tools/insn_sanity.c:36:
/data/fs/linux-2.6-hdr/include/linux/types.h:14:26: error: conflicting types for 'fd_set'
/usr/include/sys/select.h:76:5: note: previous declaration of 'fd_set' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:15:25: error: conflicting types for 'dev_t'
/usr/include/sys/types.h:61:17: note: previous declaration of 'dev_t' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:25:26: error: conflicting types for 'timer_t'
/usr/include/time.h:104:19: note: previous declaration of 'timer_t' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:45:26: error: conflicting types for 'loff_t'
/usr/include/sys/types.h:45:18: note: previous declaration of 'loff_t' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:112:17: error: conflicting types for 'u_int64_t'
/usr/include/sys/types.h:204:1: note: previous declaration of 'u_int64_t' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:113:17: error: conflicting types for 'int64_t'
/usr/include/sys/types.h:198:1: note: previous declaration of 'int64_t' was here
/data/fs/linux-2.6-hdr/include/linux/types.h:134:23: error: conflicting types for 'blkcnt_t'
/usr/include/sys/types.h:236:20: note: previous declaration of 'blkcnt_t' was here
In file included from /data/fs/linux-2.6-hdr/arch/x86/lib/insn.c:21:0,
                 from arch/x86/tools/insn_sanity.c:36:
/data/fs/linux-2.6-hdr/include/linux/string.h:38:12: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:38:12: error: expected identifier or '(' before ')' token
/data/fs/linux-2.6-hdr/include/linux/string.h:41:12: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:53:15: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:61:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'skip_spaces'
/data/fs/linux-2.6-hdr/include/linux/string.h:65:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'char'
/data/fs/linux-2.6-hdr/include/linux/string.h:83:15: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:83:15: error: expected identifier or '(' before ')' token
/data/fs/linux-2.6-hdr/include/linux/string.h:86:15: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:86:15: error: expected identifier or '(' before ')' token
/data/fs/linux-2.6-hdr/include/linux/string.h:89:24: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:89:24: error: expected identifier or '(' before ')' token
/data/fs/linux-2.6-hdr/include/linux/string.h:92:24: error: expected identifier or '(' before '__extension__'
/data/fs/linux-2.6-hdr/include/linux/string.h:92:24: error: expected identifier or '(' before ')' token
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Fix the x86 test_get_len tool to have the right include paths in the right
order (it includes a non-exported kernel header directly), otherwise errors
like the following occur:

/data/fs/linux-2.6-hdr/include/linux/types.h:18:26: error: conflicting types for 'fd_set'
/usr/include/sys/select.h:78:5: note: previous declaration of 'fd_set' was here

and

/data/fs/linux-2.6-hdr/include/linux/string.h:42:12: error: expected identifier or '(' before '__extension__'
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Set up empty UAPI Kbuild files to be populated by the header splitter.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Partition the header include path flags into two sets, one for kernelspace
builds and one for userspace builds.

Add the following directories to build after the ordinary include directories
so that #include will pick up the UAPI header directly if the kernel header
has been moved there.

The userspace set (represented by the USERINCLUDE make variable) contains:

	-I $(srctree)/arch/$(hdr-arch)/include/uapi
	-I arch/$(hdr-arch)/include/generated/uapi
	-I $(srctree)/include/uapi
	-I include/generated/uapi
	-include $(srctree)/include/linux/kconfig.h

and the kernelspace set (represented by the LINUXINCLUDE make variable)
contains:

	-I $(srctree)/arch/$(hdr-arch)/include
	-I arch/$(hdr-arch)/include/generated
	-I $(srctree)/include
	-I include		--- if not building in the source tree

plus everything in the USERINCLUDE set.

Then use USERINCLUDE in building the x86 boot code.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Convert #include "..." to #include <path/...> in kernel system headers.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Remove redundant DRM UAPI header #inclusions from drivers/gpu/.

Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h).  They are now #included via drmP.h and drm_crtc.h via a preceding
patch.

Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..."  work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Only refer to the DRM UAPI headers (drm.h, drm_mode.h and drm_sarea.h) from
within drmP.h and drm_crtc.h, and use #include <...> to refer to them so that
when the UAPI split happens they can still be accessed.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

This fixes a local merge conflict resolution done wrong locally in
arm-soc for-next. soc.h was added on a cleanup branch, but the driver
was moved and the header no longer needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
[ .. and I did the same wrong merge, since git automatically does the
  whole rename detection etc, so applying this patch from Olof  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...

Pull ARM soc documentation updates from Olof Johansson:
 "Documentation update for Marvell SoCs, the secret decoder ring to all
  their crazy product names and numbers."

* tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: add documentation describing Marvell families of SoC

Pull ARM soc device tree updates, take 2 from Olof Johansson:
 "This branch contains mostly a set of changes for device tree bindings
  on Samsung Exynos.  It was staged behind the other branches due to
  dependencies on pincontrol and board changes."

Fix up trivial conflict in drivers/clocksource/Makefile due to earlier
conflict resolution.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms
  ARM: EXYNOS: Add AUXDATA support for MSHC controllers
  ARM: EXYNOS: Add support for MSHC controller clocks
  ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
  ARM: dts: use uart2 for console on smdkv310 and smdk5250
  ARM: dts: Add basic dts file for Samsung Trats board
  ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
  ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
  ARM: dts: Assume status of all optional nodes as disabled for exynos4
  ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
  ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi

Pull ARM soc board specific updates from Olof Johansson:
 "Misc board updates:
   - Greg added a handful of boards to KS8695 (since he has stepped up
     to maintain it).
   - Qualcomm has added DT-only board support for a couple of their
     newer SoCs.
   - misc other updates for Samsung and Freescale boards."

Fix up trivial conflict in arch/arm/mach-shmobile/board-armadillo800eva.c
due to gpio device data being added next to hdmi device data that got moved.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: msm: Allow 8960 and 8660 to compile together
  ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist
  ARM: EXYNOS: Add generic PWM lookup support for SMDKV310
  ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12
  ARM: EXYNOS: Use generic pwm driver in Origen board
  ARM: shmobile: armadillo800eva: Add support RTC
  ARM: ks8695: add board support for the OpenGear boards based on the KS8695
  ARM: ks8695: add board support for the SnapGear boards based on the KS8695
  ARM: dts: Add heartbeat gpio-leds support to Origen
  ARM: dts: Use active low flag for gpio-keys on Origen
  ARM: shmobile: marzen: enable thermal sensor
  ARM: shmobile: marzen: fixup regulator id for smsc911x
  ARM: shmobile: marzen: add SDHI0 support
  ARM: mmp: enable debug uart port in defconfig
  ARM: mmp: implement DEBUG_LL port choice
  ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore
  ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore
  ARM: mx27pdk: Add audio support
  ARM: ttc_dkb: add nand support

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...

Pull ARM soc-specific updates, take 2 from Olof Johansson:
 "This branch converts the MXS Freescale platform to use irqdomains and
  sparse IRQ, in preparation for DT probing and multiplatform kernels."

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: remove mach/irqs.h
  ARM: mxs: select SPARSE_IRQ
  ARM: mxs: adopt irq_domain support for icoll driver
  ARM: mxs: select MULTI_IRQ_HANDLER
  ARM: mxs: retrieve timer irq from device tree
  gpio/mxs: adopt irq_domain support for mxs gpio driver

Pull ARM soc cleanups, part 2 from Olof Johansson:
 "A shorter cleanup branch submitted separately due to dependencies with
  some of the previous topics.

  Major thing here is that the Broadcom bcmring platform is removed.
  It's an SoC that's used on some stationary VoIP platforms, and is in
  desperate need of some cleanup.  Broadcom came back and suggested that
  we just deprecate the platform for now, since they aren't going to
  spend the resources needed on cleaning it up, and there are no users
  of the platform directly from mainline."

Fix some conflicts due to BCM2835 getting added next to the removed
BCMRING, and removal of tegra files that had been converted to
devicetree.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
  ARM: ux500: use __iomem pointers for MMIO
  ARM: Remove mach-bcmring
  ARM: clps711x: Remove board support for CEIVA
  ARM: clps711x: Fix register definitions
  ARM: clps711x: Fix lowlevel debug-macro
  ARM: clps711x: Added simple clock framework
  pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl
  ARM: tegra: delete unused headers
  ARM: tegra: remove useless includes of <mach/*.h>
  ARM: tegra: remove dead code

Pull ARM soc device tree updates from Olof Johansson:
 "Device tree conversion and enablement branch.  Mostly a bunch of new
  bindings and setup for various platforms, but the Via/Winchip VT8500
  platform is also converted over from being 100% legacy to now use
  device tree for probing.  More of that will come for 3.8."

Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
  arm: vt8500: Fixup for missing gpio.h
  ARM: LPC32xx: LED fix in PHY3250 DTS file
  ARM: dt: mmp-dma: add binding file
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ...

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

Pull ARM soc MAINTAINERS updates from Olof Johansson:
 "Maintainers updates for KS8965 adding Greg Ungerer, and removing
  myself and Colin Cross as tegra maintainers, since Stephen Warren has
  been handling it on his own for several releases now."

* tag 'maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: ks8695: add maintainers entry
  MAINTAINERS: tegra: remove Olof/Colin, add device tree files
  MAINTAINERS: add defconfig file to TEGRA section

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...

Pull non-critical ARM soc bug fixes from Olof Johansson:
 "These were submitted as bug fixes before v3.6 but not considered
  important enough to be included in it.  Some of them cross over to
  cleanup territory as well, and aren't strictly bugfixes."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: nomadik: remove NAND_NO_READRDY use
  ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
  ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()
  ARM: S3C24XX: removes unnecessary semicolon
  ARM: S3C24xx: delete double assignment
  ARM: EXYNOS: fix address for EXYNOS4 MDMA1
  ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name
  ARM: ep93xx: Move ts72xx.h out of include/mach
  ARM: ep93xx: use __iomem pointers for MMIO
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660
  ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write
  ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save
  dma: tegra: make data used as *of_device_id.data const
  can: mpc5xxx_can: make data used as *of_device_id.data const
  macintosh/mediabay: make data used as *of_device_id.data const
  i2c/mpc: make data used as *of_device_id.data const
  mfd/da9052: make i2c_device_id array const
  ...

Pull CIFS updates from Steve French:
 "This patchset is the final section of the SMB2.1 support merge for
  cifs.ko.  It also includes improvements to the cifs socket handling
  from Jeff, and also fixes a few cifs bug fixes.  It adds SMB2 support
  for file and inode operations as well as moves some existing cifs code
  to use ops server struct of protocol specific callbacks.

  Most of this code is SMB2 specific.  When enabled SMB2.1 does pass
  various functional tests including most of the connectathon test
  suite, For SMB2.1, Connectathon test 4 and some related tests fail due
  to not updating mode bits remotely (cifsacl support where mode bits
  are approximated with the cifs acl is not enable for smb2), and test8
  (symlink) support is not completed for SMB2 yet (note that we will
  likely have a "Unix Extensions" eventually, at least for Samba, so in
  the long run posix locks won't have to be emulated when mounting Linux
  to Linux, but for most NAS and for Windows mounts posix lock emulation
  will still used for SMB2 in a similar fashion as we do for cifs).

  SMB2.1 dialect is supported.  Although additional fixes to enable smb2
  (the original smb2.02) dialect and to add various optional features of
  the smb3 dialect are expected to be added in the future as testing
  progresses, currently mounting with the "vers=2.1" is supported (in
  order to mount using SMB2.1 to servers like Samba 4, and Windows 7,
  Windows 2008R2)."

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: (82 commits)
  [CIFS] Fix indentation of fs/cifs/Kconfig entries
  [CIFS] Fix SMB2 negotiation support to select only one dialect (based on vers=)
  cifs: obtain file access during backup intent lookup (resend)
  CIFS: Fix possible freed pointer dereference in CIFS_SessSetup
  CIFS: Fix possible freed pointer dereference in SMB2_sess_setup
  CIFS: Make ops->close return void
  cifs: change DOS/NT/POSIX mapping of ERRnoresource
  cifs: remove support for deprecated "forcedirectio" and "strictcache" mount options
  cifs: remove support for CIFS_IOC_CHECKUMOUNT ioctl
  CIFS: Fix possible memory leaks in SMB2 code
  CIFS: Fix endian conversion of IndexNumber
  Trivial endian fixes
  MARK SMB2 support EXPERIMENTAL
  Update cifs version number
  cifs: add FL_CLOSE to fl_flags mask in cifs_read_flock
  cifs: Mangle string used for unc in /proc/mounts
  cifs: cleanups for cifs_mkdir_qinfo
  CIFS: Fix fast lease break after open problem
  CIFS: Add SMB2.1 lease break support
  CIFS: Fix cache coherency for read oplock case
  ...

This file has turned out to be a pure write-only file that causes merge
conflicts and has no actual redeeming features.

There is never any reason to add stuff to this idiotic file.  Either
something isn't getting used, and you should just remove it, or there is
no excuse for removing it in the first place.  Just stop the idiocy.

It has also been the excuse for just plain bad behavior ("Hey, I don't
like xyz, so let's mark it for removal" followed by "Hey, look, it been
in feature-removal.txt for six months now, so we should remove it").

The recent bogus setitimer() ABI change request was just the most recent
example of pointless and incorrect mental masturbation involving this
file, and I'm tired of the silly and pointless conflicts in the file.

This removal was discussed during the recent kernel summit, and while
Steven Rostedt suggested we should just enter the file itself in the
feature-removal schedule (to see if anybody who edits the file actually
looks at it), that's cute but non-productive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Conflicts:
	arch/arm/mach-exynos/clock-exynos5.c

Conflicts:
	arch/arm/mach-shmobile/board-armadillo800eva.c

Conflicts:
	arch/arm/boot/dts/omap4.dtsi
	arch/arm/mach-clps711x/common.c
	arch/arm/mach-omap1/board-h2.c
	arch/arm/mach-omap1/board-h3.c
	arch/arm/mach-omap1/leds-h2p2-debug.c
	arch/arm/mach-omap1/leds.c
	arch/arm/mach-pnx4008/time.c
	arch/arm/plat-omap/debug-leds.c
	drivers/Makefile
	drivers/bus/omap_l3_noc.c

Conflicts:
	arch/arm/Kconfig
	arch/arm/Makefile
	arch/arm/mach-bcmring/arch.c
	arch/arm/mach-tegra/devices.c
	arch/arm/mach-tegra/dma.c

Conflicts:
	Documentation/devicetree/bindings/usb/platform-uhci.txt
	arch/arm/mach-vt8500/bv07.c
	arch/arm/mach-vt8500/devices-vt8500.c
	arch/arm/mach-vt8500/devices-wm8505.c
	arch/arm/mach-vt8500/devices.c
	arch/arm/mach-vt8500/devices.h
	arch/arm/mach-vt8500/wm8505_7in.c

Conflicts:
	arch/arm/mach-ux500/clock.c
	arch/arm/mach-ux500/cpu.c
	drivers/clocksource/Makefile

Conflicts:
	drivers/staging/tidspbridge/core/wdt.c
	drivers/usb/host/Kconfig
	drivers/w1/masters/omap_hdq.c

Pull x86/smap support from Ingo Molnar:
 "This adds support for the SMAP (Supervisor Mode Access Prevention) CPU
  feature on Intel CPUs: a hardware feature that prevents unintended
  user-space data access from kernel privileged code.

  It's turned on automatically when possible.

  This, in combination with SMEP, makes it even harder to exploit kernel
  bugs such as NULL pointer dereferences."

Fix up trivial conflict in arch/x86/kernel/entry_64.S due to newly added
includes right next to each other.

* 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, smep, smap: Make the switching functions one-way
  x86, suspend: On wakeup always initialize cr4 and EFER
  x86-32: Start out eflags and cr4 clean
  x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
  x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry
  x86, smap: Reduce the SMAP overhead for signal handling
  x86, smap: A page fault due to SMAP is an oops
  x86, smap: Turn on Supervisor Mode Access Prevention
  x86, smap: Add STAC and CLAC instructions to control user space access
  x86, uaccess: Merge prototypes for clear_user/__clear_user
  x86, smap: Add a header file with macros for STAC/CLAC
  x86, alternative: Add header guards to <asm/alternative-asm.h>
  x86, alternative: Use .pushsection/.popsection
  x86, smap: Add CR4 bit for SMAP
  x86-32, mm: The WP test should be done on a kernel page

Pull ia64 update from Tony Luck:
 "Usual mish-mash of ia64 fixes for next merge window"

* tag 'please-pull-ia64-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] xen: Fix return value check in xencomm_vtop()
  [IA64] Must enable interrupts in do_notify_resume_user before calling tracehook_notify_resume()
  [IA64] kexec: Move the dereference below the NULL test
  [IA64] Fix a node distance bug

Pull m68k updates from Geert Uytterhoeven:
 "All pretty boring, seems like all of us had better things to do last
  summer..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/q40: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/amiga: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR
  m68k/apollo: Remove disabled definitions in apollohw.h

Pull dlm updates from David Teigland:
 "There are two main patches in this set, both related to the userland
  dlm_controld daemon.

  The first fixes a deadlock between dlm_controld and the dlm_send
  workqueue when both access configfs data simultaneously.

  The second reworks some code to get around a long standing, but
  intentional, unlock balance warning.  The userland daemon no longer
  takes a lock that is later released from the kernel.

  The other commits are minor fixes and changes."

* tag 'dlm-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: check the maximum size of a request from user
  dlm: cleanup send_to_sock routine
  dlm: convert add_sock routine return value type to void
  dlm: remove redundant variable assignments
  dlm: fix unlock balance warnings
  dlm: fix uninitialized spinlock
  dlm: fix deadlock between dlm_send and dlm_controld

Pull hwmon updates from Guenter Roeck:
 "New drivers for: MCP3221, ADT7410, MAX197

  Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112,
  MAX1113, INA220, INA230, MCP3221

  Cleanup: Use devm_ functions, fixed build warnings, removed deprecated
  sysfs attributes, code simplifications, dropped dependencies on
  EXPERIMENTAL"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
  hwmon: (mcp3021) Add MCP3221 support
  hwmon: (mcp3021) Prepare MCP3021 driver to support other chips
  hwmon: (w83791d) Drop unnecessary compare statements
  hwmon: (lm93) Drop unnecessary compare statement
  hwmon: (lm70) Simplify show_name function
  hwmon: (adcxx) Simplify show_name function
  hwmon: Drop dependencies on EXPERIMENTAL
  hwmon: (it87) Fix Kconfig for IT87 driver
  hwmon: (sht15) move header to linux/platform_data/
  hwmon: (asus_atk0110) Remove useless kfree
  hwmon: (ina2xx) Add support for INA220 and INA230
  hwmon: (ina2xx) Use structure array to distinguish chip types
  hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113
  hwmon: (lm70) Add support for LM71 and LM74
  hwmon: (Documentation) Update feature-removal-schedule.txt
  hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes
  hwmon: (w83792d) Remove legacy chassis intrusion detection attributes
  hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute
  hwmon: (lm70) Allow 4wire SPI bus with LM70
  hwmon: (sht15) remove multiple driver registration
  ...

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a2 for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...