- 02 May, 2024 13 commits
-
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes from Takashi Sakamoto: "Two driver fixes: - The firewire-ohci driver for 1394 OHCI hardware does not fill time stamp for response packet when handling asynchronous transaction to local destination. This brings an inconvenience that the response packet is not equivalent between the transaction to local and remote. It is fixed by fulfilling the time stamp with hardware time. The fix should be applied to Linux kernel v6.5 or later as well. - The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has long-standing issue about the behaviour when user space application passes less size of buffer than expected. It is fixed by returning zero according to the convention of UNIX-like systems" * tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fulfill timestamp for some local asynchronous transaction firewire: nosy: ensure user_length is taken into account when fetching packet contents
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "Fix a memory leak and a few locking issues (that may cause the kernel to crash in principle if all goes wrong) in the thermal debug code introduced during the 6.8 development cycle" * tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Prevent use-after-free from occurring after cdev removal thermal/debugfs: Fix two locking issues with thermal zone debug thermal/debugfs: Free all thermal zone debug memory on zone removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ...
-
Jakub Kicinski authored
Chris's email address bounces and lore hasn't seen an email from anyone with his name for almost a decade. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
aelior@marvell.com bounces, we haven't seen Ariel on lore since March 2022. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Richard Gobert says: ==================== net: gro: add flush/flush_id checks and fix wrong offset in udp This series fixes a bug in the complete phase of UDP in GRO, in which socket lookup fails due to using network_header when parsing encapsulated packets. The fix is to add network_offset and inner_network_offset to napi_gro_cb and use these offsets for socket lookup. In addition p->flush/flush_id should be checked in all UDP flows. The same logic from tcp_gro_receive is applied for all flows in udp_gro_receive_segment. This prevents packets with mismatching network headers (flush/flush_id turned on) from merging in UDP GRO. The original series includes a change to vxlan test which adds the local parameter to prevent similar future bugs. I plan to submit it separately to net-next. This series is part of a previously submitted series to net-next: https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/ v3 -> v4: - Store network offsets, and use them only in udp_gro_complete flows - Correct commit hash used in Fixes tag - v3: https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/ v2 -> v3: - Add network_offsets and fix udp bug in a single commit to make backporting easier - Write to inner_network_offset in {inet,ipv6}_gro_receive - Use network_offsets union in tcp[46]_gro_complete as well - v2: https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/ v1 -> v2: - Use network_offsets instead of p_poff param as suggested by Willem - Check flush before postpull, and for all UDP GRO flows - v1: https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Richard Gobert authored
GRO-GSO path is supposed to be transparent and as such L3 flush checks are relevant to all UDP flows merging in GRO. This patch uses the same logic and code from tcp_gro_receive, terminating merge if flush is non zero. Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Richard Gobert authored
Commits a6024562 ("udp: Add GRO functions to UDP socket") and 57c67ff4 ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a6024562 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Shigeru Yoshida authored
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5acae ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Alexandra Winter authored
Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80d ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Guillaume Nault authored
Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba46 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
__skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path. Fixes: b7df21cf ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7f3434974f29 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29 RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003 RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> In the critical scenario, either the relevant skb is freed or its ownership is transferred into a frag_lists. In both cases, the cleanup code must not free it again: we need to clear the skb reference earlier. Fixes: 1149557d ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852 Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 01 May, 2024 9 commits
-
-
Jeffrey Altman authored
The find connection logic of Transarc's Rx was modified in the mid-1990s to support multi-homed servers which might send a response packet from an address other than the destination address in the received packet. The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION) were altered to permit acceptance of a packet from any address provided that the port number was unchanged and all of the connection identifiers matched (Epoch, CID, SecurityClass, ...). This change applies the same rules to the Linux implementation which makes it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS. Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <jaltman@auristor.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Torvalds authored
Merge tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There's a few simple driver specific fixes here, plus some core cleanups from Matti which fix issues found with client drivers due to the API being confusing. The two fixes for the stubs provide more constructive behaviour with !REGULATOR configurations, issues were noticed with some hwmon drivers which would otherwise have needed confusing bodges in the users. The irq_helpers fix to duplicate the provided name for the interrupt controller was found because a driver got this wrong and it's again a case where the core is the sensible place to put the fix" * tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: change devm_regulator_get_enable_optional() stub to return Ok regulator: change stubbed devm_regulator_get_enable to return Ok regulator: vqmmc-ipq4019: fix module autoloading regulator: qcom-refgen: fix module autoloading regulator: mt6360: De-capitalize devicetree regulator subnodes regulator: irq_helpers: duplicate IRQ name
-
Felix Fietkau authored
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment. Fixes: 3a1296a3 ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Felix Fietkau authored
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns an invalid linearized skb. This code only needs to change the ethernet header, so pskb_copy is the right function to call here. Fixes: 6db6f0ea ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Christoph reported a splat hinting at a corrupted snd_una: WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Modules linked in: CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8 8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe <0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9 RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4 RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000 R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0 Call Trace: <TASK> __mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline] mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline] __mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615 mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767 process_one_work+0x1e0/0x560 kernel/workqueue.c:3254 process_scheduled_works kernel/workqueue.c:3335 [inline] worker_thread+0x3c7/0x640 kernel/workqueue.c:3416 kthread+0x121/0x170 kernel/kthread.c:388 ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> When fallback to TCP happens early on a client socket, snd_nxt is not yet initialized and any incoming ack will copy such value into snd_una. If the mptcp worker (dumbly) tries mptcp-level re-injection after such ack, that would unconditionally trigger a send buffer cleanup using 'bad' snd_una values. We could easily disable re-injection for fallback sockets, but such dumb behavior already helped catching a few subtle issues and a very low to zero impact in practice. Instead address the issue always initializing snd_nxt (and write_seq, for consistency) at connect time. Fixes: 8fd73804 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vitaly Lifshits authored
This is a partial revert of commit 6dbdd4de ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. Fixes: 6dbdd4de ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marek Behún authored
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding Information Tables. Fixes: a75961d0 ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341") Fixes: 1558727a ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sebastian Andrzej Siewior authored
The selftest for the driver sends a dummy packet and checks if the packet will be received properly as it should be. The regular TX path and the selftest can use the same network queue so locking is required and was missing in the selftest path. This was addressed in the commit cited below. Unfortunately locking the TX queue requires BH to be disabled which is not the case in selftest path which is invoked in process context. Lockdep should be complaining about this. Use __netif_tx_lock_bh() for TX queue locking. Fixes: c650e048 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yunsheng Lin authored
rxrpc_alloc_data_txbuf() may be called with data_align being zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align is supposed to be an order-based alignment value, but zero is not a valid order-based alignment value, and '~(data_align - 1)' doesn't result in a valid mask-based alignment value for __page_frag_alloc_align(). Fix it by passing a valid order-based alignment value in none_alloc_txbuf() and rxkad_alloc_txbuf(). Also use page_frag_alloc_align() expecting an order-based alignment value in rxrpc_alloc_data_txbuf() to avoid doing the alignment converting operation and to catch possible invalid alignment value in the future. Remove the 'if (data_align)' checking too, as it is always true for a valid order-based alignment value. Fixes: 6b253646 ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()") Fixes: 49489bb0 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 30 Apr, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fix from Paolo Bonzini: "A pretty straightforward fix for a NULL pointer dereference, plus the accompanying reproducer" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #2 - Fix + test for a NULL dereference resulting from unsanitised user input in the vgic-v2 device attribute accessors
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: - mt6360_charger: Fix of_match for usb-otg-vbus regulator - rt9455: Fix unused-const-variable for !CONFIG_USB_PHY * tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator power: rt9455: hide unused rt9455_boost_voltage_values
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Ilpo Järvinen: - Add Grand Ridge to HPM CPU list * tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ISST: Add Grand Ridge to HPM CPU list
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix a double-free in the pinctrl_enable() errorpath - Fix a refcount leak in pinctrl_dt_to_map() - Fix selecting the GPIO pin control state and the UART3 pin config group in the Intel Baytrail driver - Fix readback of schmitt trigger status in the Mediatek Paris driver, along with some semantic pin config issues in this driver - Fix a pin suffix typo in the Meson A1 driver - Fix an erroneous register offset in he Aspeed G6 driver - Fix an inconsistent lock state and the interrupt type on resume in the Renesas RZG2L driver - Fix some minor confusion in the Renesas DT bindings * tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: renesas: rzg2l: Configure the interrupt type on resume pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map() pinctrl: baytrail: Add pinconf group for uart3 pinctrl: baytrail: Fix selecting gpio pinctrl state pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback pinctrl: core: delete incorrect free in pinctrl_enable() pinctrl/meson: fix typo in PDM's pin name pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
-
- 29 Apr, 2024 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "Two doc update patches and the following three fixes: - On single node systems, the default pool is used but the node_nr_active for the default pool was set to min_active. This effectively limited the max concurrency of unbound pools on single node systems to 8 causing performance regressions on some workloads. Fixed by setting the default pool's node_nr_active to max_active. - wq_update_node_max_active() could trigger divide-by-zero if the intersection between the allowed CPUs for an unbound workqueue and online CPUs becomes empty. - When kick_pool() was trying to repatriate a worker to a CPU in its pod by setting task->wake_cpu, it didn't consider whether the CPU being selected is online or not which obviously can lead to subobtimal behaviors. On s390, this triggered a crash in arch code. The workqueue patch removes the gross misbehavior but doesn't fix the crash completely as there's a race window in which CPUs can go down after wake_cpu is set. Need to decide whether the fix should be on the core or arch side" * tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix divide error in wq_update_node_max_active() workqueue: The default node_nr_active should have its max set to max_active workqueue: Fix selection of wake_cpu in kick_pool() docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1 Documentation/core-api: Update events_freezable_power references.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "Minor core fix to prevent the sd driver printing the stream count every time we rescan and instead print only if it's changed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Only print updates to permanent stream count
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fix from Chuck Lever: - Avoid freeing unallocated memory (v6.7 regression) * tag 'nfsd-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix nfsd4_encode_fattr4() crasher
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: - Fix an Oops in xs_tcp_tls_setup_socket - Fix an Oops due to missing error handling in nfs_net_init() * tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Handle error of rpc_proc_register() in nfs_net_init(). SUNRPC: add a missing rpc_stat for TCP TLS
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Tiny set of fixes this time" * tag 'bcachefs-2024-04-29' of https://evilpiepirate.org/git/bcachefs: bcachefs: fix integer conversion bug bcachefs: btree node scan now fills in sectors_written bcachefs: Remove accidental debug assert
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: "Three fixes related to EROFS fscache mode. The most important two patches fix calling kill_block_super() in bdev-based mode instead of kill_anon_super(). The remaining patch is an informative one. Summary: - Better error message when prepare_ondemand_read failed - Fix unmount of bdev-based mode if CONFIG_EROFS_FS_ONDEMAND is on" * tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: reliably distinguish block based and fscache mode erofs: get rid of erofs_fs_context erofs: modify the error message when prepare_ondemand_read failed
-
Matthew Wilcox (Oracle) authored
bits_per() rounds up to the next power of two when passed a power of two. This causes crashes on some machines and configurations. Reported-by: Михаил Новоселов <m.novosyolov@rosalinux.ru> Tested-by: Ильфат Гаптрахманов <i.gaptrakhmanov@rosalinux.ru> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3347 Link: https://lore.kernel.org/all/1c978cf1-2934-4e66-e4b3-e81b04cb3571@rosalinux.ru/ Fixes: f2d5dcb4 (bounds: support non-power-of-two CONFIG_NR_CPUS) Cc: <stable@vger.kernel.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
Guillaume Nault says: ==================== vxlan: Fix vxlan counters. Like most virtual devices, vxlan needs special care when updating its netdevice counters. This is done in patch 1. Patch 2 just adds a missing VNI counter update (found while working on patch 1). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
VXLAN stores per-VNI statistics using vxlan_vnifilter_count(). These statistics were not updated when arp_reduce() failed its pskb_may_pull() call. Use vxlan_vnifilter_count() to update the VNI counter when that happens. Fixes: 4095e0e1 ("drivers: vxlan: vnifilter: per vni stats") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
VXLAN devices update their stats locklessly. Therefore these counters should either be stored in per-cpu data structures or the updates should be done using atomic increments. Since the net_device_core_stats infrastructure is already used in vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter updates. Update the other counters atomically using DEV_STATS_INC(). Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Srinivas Pandruvada authored
Add Grand Ridge (ATOM_CRESTMONT) to hpm_cpu_ids, so that MSR 0x54 can be used. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20240422212222.3881606-1-srinivas.pandruvada@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-
Takashi Sakamoto authored
1394 OHCI driver generates packet data for the response subaction to the request subaction to some local registers. In the case, the driver should assign timestamp to them by itself. This commit fulfills the timestamp for the subaction. Cc: stable@vger.kernel.org Fixes: dcadfd7f ("firewire: core: use union for callback of transaction completion") Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
-
Thanassis Avgerinos authored
Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows. Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
-