- 19 Feb, 2019 27 commits
-
-
Arend van Spriel authored
When the firmware crashes during the probe sequence we provide little information on what really failed. This patch checks the sdpcm shared location and show the trap information if a firmware trap has happened. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arend van Spriel authored
The MBSS feature was already disabled for bcm43362 as it resulted in a beacon with BRCM_TEST_SSID regardless user configuration in hostapd. Now the same has been reported for bcm4330 so disable the feature for this device as well. Reported-by:
Russell King <linux@armlinux.org.uk> Tested-by:
Christopher Martin <chrsmrtn@gmail.com> Reviewed-by:
-
Arend van Spriel authored
Since we moved the drivers debugfs directory under ieee80211 debugfs the debugfs entries need to be added after wiphy_register() has been called. For most part that has been done accordingly, but for the debugfs entries added by SDIO it was not and failed silently. This patch fixes that by adding a bus-layer callback for it. Fixes: 856d5a01 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()") Reported-by:
-
Arend van Spriel authored
For USB there is no separate channel being used to pass events from firmware to the host driver and as such are passed over the data path. In order to detect mock event messages an additional check is needed on event subtype. This check is added conditionally using unlikely() keyword. Reviewed-by:
-
Arend van Spriel authored
The SSID length as received from firmware should not exceed IEEE80211_MAX_SSID_LEN as that would result in heap overflow. Reviewed-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. The following checkpatch exceptions are also fixed: WARNING: line over 80 characters #316: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c:1751: + SET_8821AE_H2CCMD_AOAC_RSVDPAGE_LOC_GTK_EXT_MEM(u1rsvdpageloc2, GTKEXT_PG); CHECK: spaces preferred around that '+' (ctx:VxV) #357: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2591: + (eeaddr+1), hwinfo[eeaddr+1]); ^ CHECK: spaces preferred around that '+' (ctx:VxV) #357: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2591: + (eeaddr+1), hwinfo[eeaddr+1]); ^ CHECK: spaces preferred around that '+' (ctx:VxV) #358: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2592: + if (0xFF == hwinfo[eeaddr+1]) /*YJ,add,120316*/ ^ WARNING: Comparisons should place the constant on the right side of the test #358: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2592: + if (0xFF == hwinfo[eeaddr+1]) /*YJ,add,120316*/ CHECK: spaces preferred around that '&' (ctx:VxV) #501: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2666: + pwrinfo24g->bw40_diff[rfpath][txcount] = (hwinfo[eeaddr]&0xf0) >> 4; ^ Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. The following checkpatch exceptions are also fixed: CHECK: No space is necessary after a cast #211: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:109: + (u8 *) (&rfstate)); CHECK: No space is necessary after a cast #241: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:277: + ptmp_byte = (u8 *) (®toset) + index; Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by:
-
Larry Finger authored
This patch affects modules rtl8192ce, rtl8192cu, and rtl8192com. The following checkpatch exceptions are also fixed: CHECK: No space is necessary after a cast #237: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:90: + (u8 *) (&rfstate)); CHECK: No space is necessary after a cast #744: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:329: + pwr_val[i] = (u8) ((writeval & (0x7f << CHECK: No space is necessary after a cast #784: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:365: + (u8) writeval); CHECK: spaces preferred around that '/' (ctx:VxV) #963: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:513: + txqpageunit = txqpagenum/outepnum; ^ CHECK: Unnecessary parentheses around 'outepnum > 1' #975: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:521: + if ((outepnum > 1) && (txqremaininpage)) CHECK: Alignment should match open parenthesis #1059: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:617: +static void _rtl92cu_init_chipn_two_out_ep_priority(struct ieee80211_hw *hw, bool wmm_enable, ERROR: "foo * bar" should be "foo *bar" #1940: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:591: +void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: -
Larry Finger authored
This driver contains one instance of a CamelCase variable, namely IS_81xxC_VENDOR_UMC_A_CUT. This macro is never used, thus it is deleted. Signed-off-by:
-
Larry Finger authored
File halbt_precomp.h contains the only CamelCase value, namely GetDefaultAdapter, but that macro is never used, thus it is deleted. Signed-off-by:
-
Larry Finger authored
There are a number of CamelCase variables remaining in the source files of modules rtl_pci, rtl_usb, and rtlwifi. The following checkpatch excettions are also fixed: for_kalle1/0001-rtlwifi-Remove-CamelCase-variables-from-base-code.patch ----------------------------------------------------------------------- CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { WARNING: line over 80 characters #70: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:379: + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != CHECK: No space is necessary after a cast #186: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:396: + status->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #208: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c:335: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #243: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:301: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #252: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:368: + stats.rx_is40mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); CHECK: No space is necessary after a cast #265: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c:475: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); WARNING: Unnecessary space before function pointer arguments #455: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:1462: + void (*writen_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf, WARNING: Unnecessary space before function pointer arguments #483: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:2257: + void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: -
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The old-style license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.1 * beacon support for USB devices (mesh+ad-hoc only) * mt76x0 tx power fixes * fixes for encryption, calibration and ED/CCA * more code unification * USB fixes * fix for using the correct hweight8 function
-
- 18 Feb, 2019 13 commits
-
-
Felix Fietkau authored
There is no need to use a for loop here, supported chips can only support up to 2 chains. Signed-off-by:Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
It needs to be unset instead of set Fixes: 23405236 ("mt76: fix transmission of encrypted management frames") Signed-off-by:
-
Felix Fietkau authored
Since ccmp_pn is u8 *, the second half needs to start at array index 4 instead of 0. Fixes a connection stall after a certain amount of traffic Fixes: 23405236 ("mt76: fix transmission of encrypted management frames") Cc: stable@vger.kernel.org Signed-off-by:
-
Felix Fietkau authored
Remove bogus check for MT_PACKET_ID_NO_ACK in mt76_tx_status_skb_get, which is already handled in callers and turns timeout calls into no-ops Do not clean up pending status items on reordering of tx status information if the timeout is not reached yet Signed-off-by: -
Ben Hutchings authored
mt76_init_stream_cap() and mt76_get_txpower() call __sw_hweight8() directly, but that's only defined if CONFIG_GENERIC_HWEIGHT is enabled. The function that works on all architectures is hweight8(). Fixes: 551e1ef4 ("mt76: add mt76_init_stream_cap routine") Fixes: 9313faac ("mt76: move mt76x02_get_txpower to mt76 core") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Stanislaw Gruszka authored
In mt76x02u_skb_dma_info() pad is always non-zero. Patch removes bogus check and add comments to the function. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
During device removal the driver can report multiple error messages. Use dev_err_ratelimited instead of dev_err to display urb errors Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Add disable_usb_sg module parameter to disable scatter-gather on demand Signed-off-by:
-
Lorenzo Bianconi authored
Use linear fragment and not a single usb scatter-gather buffer in mt76u {tx,rx} datapath if the usb controller has sg data length constraints Signed-off-by: -
Lorenzo Bianconi authored
Do not use scatter-gather buffers for mcu commands. Introduce mt76u_buf_alloc and mt76u_buf_alloc_sg routines. Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76u_check_sg routine in usb.c and introduce sg_en variable in mt76_usb in order to check if scatter-gather is supported by mt76u layer Signed-off-by:
-
Lorenzo Bianconi authored
Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path since it will be run in mt76x0u_register_device or mt76x2u_register_device error path. Current implementation triggers the following kernel warning: [ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8 [ 67.019513] refcount_t: underflow; use-after-free. [ 67.099872] Hardware name: BCM2835 [ 67.106268] Backtrace: [ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24) [ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6 [ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114) [ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120) [ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58 [ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50) [ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000 [ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8) [ 67.195221] r3:80c91c25 r2:8099dc94 [ 67.200370] r4:00000000 [ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c) [ 67.218046] r4:b7368e00 r3:00000001 [ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c) [ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb]) [ 67.247302] r4:00000001 r3:00000001 [ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb]) [ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080 [ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u]) [ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20 [ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u]) [ 67.311174] r4:b5dace20 r3:00000000 [ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240) [ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620 [ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8) [ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120 [ 67.359175] r4:b8fe8620 r3:805e0a68 [ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180) [ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034 [ 67.387170] r4:b8fe8620 r3:00000000 [ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4) [ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620 [ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0) [ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027 [ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30) [ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034 [ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c) [ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124) [ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034 [ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140) [ 67.493901] r5:00000000 r4:7f65e000 [ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u]) [ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0 [ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210) [ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c) [ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0 [ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304) Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Move q->ndesc initialization before the for loop in mt76u_alloc_rx since otherwise allocated urbs will not be freed in mt76u_buf_free Double-check scatterlist pointer in mt76u_buf_free Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Signed-off-by:
-
