- 15 Sep, 2014 40 commits
-
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
This is the main merge request for Nouveau 3.18, overview: - various bits of roy's gt21x clock work - various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs) - misc fan control improvements - kepler hdmi infoframe fixes - dp audio - l2 cache + cbc improvements * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits) drm/gt214-/disp: enable dp audio drm/gt214-/kms: fix hda eld regression drm/g94-/disp: calculate some dp audio constants drm/gt214-/kms: perform hda codec setup on displayport too drm/gk104-/disp: infoframe registers moved yet again on kepler drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones drm/nva3/fb/ram: Per-partition regs drm/nouveau/fb/ram: Support strided regs drm/nv50/fb/ram: Store the number of partitions in the designated fields drm/nv50/kms: Set VBLANK time in modeset script drm/nouveau/bios: Add rammap support for version 1.0 drm/gf100-/pwr/memx: block host and fifo around reclock drm/nouveau/pwr/memx: fix command ordering around block/unblock drm/nouveau/pwr/memx: rename fb off/on to block/unblock drm/nva3/clk: Pause the GPU before reclocking drm/nouveau/gpio: rename g92 class to g94 drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia drm/gk104/fb/ram: twiddle some more bits when reclocking drm/nouveau/bios: parse another large chunk of random memory config data drm/gk104-/fb/ram: perform certain steps only when bios data differs ...
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
NVIDIA appear to have tweaked the algorithm from GF110, this implements the previous algorithm for them still. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Thanks to Vincent Pelletier for pointing this out and providing a proof of concept patch on the list. Signed-off-by: -
Ben Skeggs authored
Done after discussion with Roy. Signed-off-by: -
Roy Spliet authored
Signed-off-by:
Roy Spliet <rspliet@eclipso.eu> Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Solves blinking on reclocking memory. The value set is an underestimate, but with non-reduced vblanking this should give us plenty of time Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
More accurate as to the function of the opcodes. Not only is FB disabled, but the host is prevented from touching the GPU. An upcoming patch for Kepler will also halt PFIFO (as NVIDIA does). Signed-off-by: -
Roy Spliet authored
V2: always call post correctly even if pre fails V3: move function prototype to nva3.h Signed-off-by: -
Emil Velikov authored
nv92 hardware has only 16 interrupt lines, while nv94 and later has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect PDISP setup. This is a regression introduced with commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon May 12 15:22:42 2014 +1000 gpio: split g92 class from nv50 Reported-by: estece on #nouveau Cc: stable@vger.kernel.org # 3.16+ Signed-off-by:Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
*when* this is done is only a rough approximation of what the binary driver does.. need to investigate more to see if it matters Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Awful, awful. But, on the GK106 I have, some upcoming patches show that this is actually necessary after all. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
All the other chipsets should be moved over to this too. It's not needed yet for the upcoming commits, so left this step as it'll conflict badly with Roy's GT21x reclocking work. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Fixes type/mask calculation being based on uninitialised data for VGA outputs. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
NVIDIA binary driver appears to, not sure if it's for a good reason, but grasping at straws for some GDDR5 reclocking issues here. Signed-off-by: -
Roy Spliet authored
V2: Always disable DLL reset Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Time measured from disabling FB to re-enabling, PPWR_IN reveals status of heads at the end of script. Helps debug various issues (like flicker). Signed-off-by:
-
Roy Spliet authored
Needs to be done after wait-for-VBLANK, and NVA3 requires register writes in between. Rather than hard-coding register writes, just split out fb_disable and fb_enable. v2. Squashed "fb/ramnve0: disable fb before reclocking" Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Martin Peres authored
Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Martin Peres authored
One of my nv92 has a calibrated internal sensor but it displays 0°C as the default values use sw calibration values to force the temperature to 0. Since we cannot read the temperature from the adt7473 present on this board, let's re-enable the internal reading! Signed-off-by:
-
Martin Peres authored
We will use this subdev to disable temperature reading on cards that did not get a sensor calibration in the factory. v2: - rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa - fold the code a little as adviced by Emil Velikov Signed-off-by:
-
