- 09 Aug, 2020 40 commits
-
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 5aee52c4 ] clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.comReviewed-by:
James Bottomley <jejb@linux.ibm.com> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Markus Theil authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 0b467b63 ] Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key. Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address. With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should. Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jacky Hu authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 69339d08 ] uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139}; which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, }, npins should be 5 instead of 9 according to the definition. Signed-off-by:
Jacky Hu <hengqing.hu@gmail.com> Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1888690 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1888690Signed-off-by:
-
Vincent Guittot authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 01cfcde9 upstream. task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit b037d60a upstream. Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue. Cc: stable@vger.kernel.org Fixes: 099343c6 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit f5e5677c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fb ("dma: Add Freescale eDMA engine driver support") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.orgSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vishwas M authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 14b0e83d upstream. This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by:
Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 Commit ed26aacf ("mips: Add udelay lpj numbers adjustment") has backported to 4.4~5.4, but the "struct cpufreq_freqs" (and also the cpufreq notifier machanism) of 4.4~4.19 are different from the upstream kernel. These differences cause build errors, and this patch can fix the build. Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Stable <stable@vger.kernel.org> # 4.4/4.9/4.14/4.19 Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Esben Haabendal authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit bf12fdf0 upstream. While e3a3c3a2 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by:
Esben Haabendal <esben@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.comSigned-off-by:
-
David Pedersen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 17d51429 upstream. This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by:
David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alexander Usyskin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e852c2c2 upstream. It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: <stable@vger.kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.comSigned-off-by:
-
Chirantan Ekbote authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 31070f6c upstream. The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/Signed-off-by:
Chirantan Ekbote <chirantan@chromium.org> Fixes: 59efec7b ("fuse: implement ioctl support") Cc: <stable@vger.kernel.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Alexander Lobakin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 897c44f0 upstream. rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b637046 ("virtio_console: Add support for remoteproc serial") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.meSigned-off-by:
-
AceLan Kao authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit da6902e5 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 08d4ef5c upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Igor Moura authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 5d0136f8 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by:
Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Hilliard authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 5c45d04c upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e7b931be upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by:
-
Zhang Qiang authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 8778eb09 upstream. Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Peter Chen authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 876d4e1e upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by:
Philippe Schenker <philippe.schenker@toradex.com> Tested-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.orgSigned-off-by:
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 211f0834 upstream. clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 9b7e5208 upstream. USB MIDI driver has an error recovery mechanism to resubmit the URB in the delayed timer handler, and this may race with the standard start / stop operations. Although both start and stop operations themselves don't race with each other due to the umidi->mutex protection, but this isn't applied to the timer handler. For fixing this potential race, the following changes are applied: - Since the timer handler can't use the mutex, we apply the umidi->disc_lock protection at each input stream URB submission; this also needs to change the GFP flag to GFP_ATOMIC - Add a check of the URB refcount and skip if already submitted - Move the timer cancel call at disconnection to the beginning of the procedure; this assures the in-flight timer handler is gone properly before killing all pending URBs Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6e8a914a upstream. LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e901b987 upstream. This patch adds a new helper function to perform a sanity check of the given URB to see whether it contains a valid endpoint. It's a light- weight version of what usb_submit_urb() does, but without the kernel warning followed by the stack trace, just returns an error code. Especially for a driver that doesn't parse the descriptor but fills the URB with the fixed endpoint (e.g. some quirks for non-compliant devices), this kind of check is preferable at the probe phase before actually submitting the urb. Tested-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6363d206 upstream. Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by:
Yariv <oigevald+kernel@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Álvaro Fernández Rojas authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 3d3fb3c5 upstream. Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.comSigned-off-by:
-
Jin Yao authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 0e0bf1ea upstream. As the code comments in perf_stat_process_counter() say, we calculate counter's data every interval, and the display code shows ps->res_stats avg value. We need to zero the stats for interval mode. But the current code only zeros the res_stats[0], it doesn't zero the res_stats[1] and res_stats[2], which are for ena and run of counter. This patch zeros the whole res_stats[] for interval mode. Fixes: 51fd2df1 ("perf stat: Fix interval output values") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit ef75e14a ] This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200709102936.GA20875@mwandaSigned-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 30517ffe ] Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f9 ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 652def4c63b99029fe8b898740f97329c26a2fd3. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 737c975db35b0117fc5c702072ca2df6f2f7eb63. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 13af14dfadcb95030dc8e2e0cacbffc1990a9772. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by:
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 5f90786b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1ca0fafd ] This essentially reverts commit 72123032 ("tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets") Mathieu reported that many vendors BGP implementations can actually switch TCP MD5 on established flows. Quoting Mathieu : Here is a list of a few network vendors along with their behavior with respect to TCP MD5: - Cisco: Allows for password to be changed, but within the hold-down timer (~180 seconds). - Juniper: When password is initially set on active connection it will reset, but after that any subsequent password changes no network resets. - Nokia: No notes on if they flap the tcp connection or not. - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until both sides are ok with new passwords. - Meta-Switch: Expects the password to be set before a connection is attempted, but no further info on whether they reset the TCP connection on a change. - Avaya: Disable the neighbor, then set password, then re-enable. - Zebos: Would normally allow the change when socket connected. We can revert my prior change because commit 9424e2e7 ("tcp: md5: fix potential overestimation of TCP option space") removed the leak of 4 kernel bytes to the wire that was the main reason for my patch. While doing my investigations, I found a bug when a MD5 key is changed, leading to these commits that stable teams want to consider before backporting this revert : Commit 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Commit e6ced831 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers") Fixes: 72123032 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets" Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit e6ced831 ] My prior fix went a bit too far, according to Herbert and Mathieu. Since we accept that concurrent TCP MD5 lookups might see inconsistent keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb() Clearing all key->key[] is needed to avoid possible KMSAN reports, if key->keylen is increased. Since tcp_md5_do_add() is not fast path, using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler. data_race() was added in linux-5.8 and will prevent KCSAN reports, this can safely be removed in stable backports, if data_race() is not yet backported. v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add() Fixes: 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 6a2febec ] MD5 keys are read with RCU protection, and tcp_md5_do_add() might update in-place a prior key. Normally, typical RCU updates would allocate a new piece of memory. In this case only key->key and key->keylen might be updated, and we do not care if an incoming packet could see the old key, the new one, or some intermediate value, since changing the key on a live flow is known to be problematic anyway. We only want to make sure that in the case key->keylen is changed, cpus in tcp_md5_hash_key() wont try to use uninitialized data, or crash because key->keylen was read twice to feed sg_init_one() and ahash_request_set_crypt() Fixes: 9ea88a15 ("tcp: md5: check md5 signature without socket lock") Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit ce69e563 ] syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c1201444 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9e ("tcp: add CDG congestion control") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Sean Tranchetti authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1e82a62f ] A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7 ("genetlink: pass multicast bind/unbind to families") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
