- 27 Jul, 2017 40 commits
-
-
Maciej W. Rozycki authored
commit fef40be6 upstream. Fix commit 319824ea ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") and also send SIGILL rather than returning -SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no longer supported in R6, except where emulated. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 319824ea ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16398/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej W. Rozycki authored
commit 1f4edde4 upstream. Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by:
-
Maciej W. Rozycki authored
commit 7b82c105 upstream. Fix commit e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") and send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP ASE instruction has been encountered in `__compute_return_epc_for_insn' as our Reserved Instruction exception handler would in response to an attempt to actually execute the instruction. Sending SIGBUS only makes sense for the unaligned PC case, since moved to `__compute_return_epc'. Adjust function documentation accordingly, correct formatting and use `pr_info' rather than `printk' as the other exit path already does. Fixes: e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") Signed-off-by:
-
Maciej W. Rozycki authored
commit 13769eba upstream. Terminate FPU emulation immediately whenever an ISA mode switch has been observed. This is so that we do not interpret machine code in the wrong mode, for example when a regular MIPS FPU instruction has been placed in a delay slot of a jump that switches into the MIPS16 mode, as with the following code (taken from a GCC test suite case): 00400650 <set_fast_math>: 400650: 3c020100 lui v0,0x100 400654: 03e00008 jr ra 400658: 44c2f800 ctc1 v0,c1_fcsr 40065c: 00000000 nop [...] 004012d0 <__libc_csu_init>: 4012d0: f000 6a02 li v0,2 4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0> 4012d8: f400 3240 sll v0,16 4012dc: e269 addu v0,v1 4012de: 659a move gp,v0 4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1 4012e4: 673c move s1,gp 4012e6: f010 9978 lw v1,-32744(s1) 4012ea: d204 sw v0,16(sp) 4012ec: eb40 jalr v1 4012ee: 653b move t9,v1 4012f0: f010 997c lw v1,-32740(s1) 4012f4: f030 9920 lw s1,-32736(s1) 4012f8: e32f subu v1,s1 4012fa: 326b sra v0,v1,2 4012fc: d206 sw v0,24(sp) 4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48> 401300: 6800 li s0,0 401302: 99e0 lw a3,0(s1) 401304: 4801 addiu s0,1 401306: 960e lw a2,56(sp) 401308: 4904 addiu s1,4 40130a: 950d lw a1,52(sp) 40130c: 940c lw a0,48(sp) 40130e: ef40 jalr a3 401310: 653f move t9,a3 401312: 9206 lw v0,24(sp) 401314: ea0a cmp v0,s0 401316: 61f5 btnez 401302 <__libc_csu_init+0x32> 401318: 6476 restore 48,ra,s0-s1 40131a: e8a0 jrc ra Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit) and emulation triggers for the CTC1 instruction. As it is in a jump delay slot emulation continues from `401312' (`401313' with the ISA bit). However we have no path to handle MIPS16 FPU code emulation, because there are no MIPS16 FPU instructions. So the default emulation path is taken, interpreting a 32-bit word fetched by `get_user' from `401313' as a regular MIPS instruction, which is: 401313: f5ea0a92 sdc1 $f10,2706(t7) This makes the FPU emulator proceed with the supposed SDC1 instruction and consequently makes the program considered here terminate with SIGSEGV. A similar although less severe issue exists with pure-microMIPS processors in the case where similarly an FPU instruction is emulated in a delay slot of a register jump that (incorrectly) switches into the regular MIPS mode. A subsequent instruction fetch from the jump's target is supposed to cause an Address Error exception, however instead we proceed with regular MIPS FPU emulation. For simplicity then, always terminate the emulation loop whenever a mode change is detected, denoted by an ISA mode bit flip. As from commit 377cb1b6 ("MIPS: Disable MIPS16/microMIPS crap for platforms not supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded to 0, so we need to examine the ISA mode bit by hand. This complements commit 102cedc3 ("MIPS: microMIPS: Floating point support.") which added JALX decoding to FPU emulation. Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.") Signed-off-by:
-
Maciej W. Rozycki authored
commit 11a3799d upstream. Fix a regression introduced with commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and defer to `__compute_return_epc' if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware, which will then arrange for a SIGBUS due to an unaligned instruction reference. Returning EPC here is never correct as the API defines this function's result to be either a negative error code on failure or one of 0 and BRANCH_LIKELY_TAKEN on success. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
Maciej W. Rozycki authored
commit a9db101b upstream. Complement commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and actually decode the regular MIPS JALX major instruction opcode, the handling of which has been added with the said commit for EPC calculation in `__compute_return_epc_for_insn'. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
James Hogan authored
commit 49955d84 upstream. The MIPS sysmips system call handler may return directly from the MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path restores the static (callee saved) registers, however they won't have been saved on entry to the system call. Use the save_static_function() macro to create a __sys_sysmips wrapper function which saves the static registers before calling sys_sysmips, so that the correct static register state is restored by syscall_exit. Fixes: f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16149/Signed-off-by:
-
Maciej W. Rozycki authored
commit e5f5a5b0 upstream. Correct a commit 515a6393 ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo") regression that caused MIPS I systems to show no ISA levels supported in /proc/cpuinfo, e.g.: system type : Digital DECstation 2100/3100 machine : Unknown processor : 0 cpu model : R3000 V2.0 FPU V2.0 BogoMIPS : 10.69 wait instruction : no microsecond timers : no tlb_entries : 64 extra interrupt vector : no hardware watchpoint : no isa : ASEs implemented : shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available and similarly exclude `mips1' from the ISA list for any processors below MIPSr1. This is because the condition to show `mips1' on has been made `cpu_has_mips_r1' rather than newly-introduced `cpu_has_mips_1'. Use the correct condition then. Fixes: 515a6393 ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo") Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Reviewed-by:
-
Seunghun Han authored
commit e708e35b upstream. One of the rarely executed code pathes in check_timer() calls unmask_ioapic_irq() passing irq_get_chip_data(0) as argument. That's wrong as unmask_ioapic_irq() expects a pointer to the irq data of interrupt 0. irq_get_chip_data(0) returns NULL, so the following dereference in unmask_ioapic_irq() causes a kernel panic. The issue went unnoticed in the first place because irq_get_chip_data() returns a void pointer so the compiler cannot do a type check on the argument. The code path was added for machines with broken configuration, but it seems that those machines are either not running current kernels or simply do not longer exist. Hand in irq_get_irq_data(0) as argument which provides the correct data. [ tglx: Rewrote changelog ] Fixes: 4467715a ("x86/irq: Move irq_cfg.irq_2_pin into io_apic.c") Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1500369644-45767-1-git-send-email-kkamagui@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Seunghun Han authored
commit dad5ab0d upstream. The bus_irq argument of mp_override_legacy_irq() is used as the index into the isa_irq_to_gsi[] array. The bus_irq argument originates from ACPI_MADT_TYPE_IO_APIC and ACPI_MADT_TYPE_INTERRUPT items in the ACPI tables, but is nowhere sanity checked. That allows broken or malicious ACPI tables to overwrite memory, which might cause malfunction, panic or arbitrary code execution. Add a sanity check and emit a warning when that triggers. [ tglx: Added warning and rewrote changelog ] Signed-off-by:
-
Lv Zheng authored
commit 9c40f956 upstream. On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier EC event freezing timing causes acpitz-virtual-0 to report a stuck 48C temparature. And with EC firmware revisioned as 1.14, without reverting back to old EC event freezing timing, the fan still blows up after a system resume. This reverts the culprit change so that the regression can be fixed without upgrading the EC firmware. Fixes: d3028305 (ACPI / EC: Enable event freeze mode to improve event handling) Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168Tested-by:
Damjan Georgievski <gdamjan@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lv Zheng authored
commit 66259146 upstream. According to bug reports, although the busy polling mode can make noirq stages execute faster, it causes abnormal fan blowing up after system resume (see the first link below for a video demonstration) on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can be fixed by upgrading the EC firmware on that machine. However, many reporters confirm that the problem can be fixed by stopping busy polling during suspend/resume and for some of them upgrading the EC firmware is not an option. For this reason, drop the noirq stage hooks from the EC driver to fix the regression. Fixes: c3a696b6 (ACPI / EC: Use busy polling mode when GPE is not enabled) Link: https://youtu.be/9NQ9x-Jm99Q Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129Reported-by:
Andreas Lindhe <andreas@lindhe.io> Tested-by:
Gjorgji Jankovski <j.gjorgji@gmail.com> Tested-by:
Fernando Chaves <nanochaves@gmail.com> Tested-by:
Tomislav Ivek <tomislav.ivek@gmail.com> Tested-by:
Denis P. <theoriginal.skullburner@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit a6664433 upstream. We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in parallel and this case was forgotten. :-( Fixes: d63d61c1 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
David Gstir authored
commit f34e87f5 upstream. When a new inode is created, we check if the containing folder has a encryption policy set and inherit that. This should however only be done for regular files, links and subdirectories. Not for sockes fifos etc. Fixes: d475a507 ("ubifs: Add skeleton for fscrypto") Signed-off-by:
David Gstir <david@sigma-star.at> Signed-off-by:
-
Richard Weinberger authored
commit 4acadda7 upstream. When UBIFS prepares data structures which will be written to the MTD it ensues that their lengths are multiple of 8. Since it uses kmalloc() the padded bytes are left uninitialized and we leak a few bytes of kernel memory to the MTD. To make sure that all bytes are initialized, let's switch to kzalloc(). Kzalloc() is fine in this case because the buffers are not huge and in the IO path the performance bottleneck is anyway the MTD. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Richard Weinberger authored
commit 272eda82 upstream. UBIFS handles extended attributes just like files, as consequence of that, they also have inodes. Therefore UBIFS does all the inode machinery also for xattrs. Since new inodes have i_nlink of 1, a file or xattr inode will be evicted if i_nlink goes down to 0 after an unlink. UBIFS assumes this model also for xattrs, which is not correct. One can create a file "foo" with xattr "user.test". By reading "user.test" an inode will be created, and by deleting "user.test" it will get evicted later. The assumption breaks if the file "foo", which hosts the xattrs, will be removed. VFS nor UBIFS does not remove each xattr via ubifs_xattr_remove(), it just removes the host inode from the TNC and all underlying xattr nodes too and the inode will remain in the cache and wastes memory. To solve this problem, remove xattr inodes from the VFS inode cache in ubifs_xattr_remove() to make sure that they get evicted. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Boris Brezillon authored
commit a1864932 upstream. SEQIN is supposed to be used when one wants to start programming a page. What we want here is just to change the column within the page, which is done with the RNDIN command. Fixes: 6956e238 ("mtd: nand: add tango NAND flash controller support") Signed-off-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by:
-
James Hogan authored
commit 4f32a39d upstream. The sys_exit trace event takes a single return value for the system call, which MIPS passes the value of the $v0 (result) register, however MIPS returns positive error codes in $v0 with $a3 specifying that $v0 contains an error code. As a result erroring system calls are traced returning positive error numbers that can't always be distinguished from success. Use regs_return_value() to negate the error code if $a3 is set. Fixes: 1d7bf993 ("MIPS: ftrace: Add support for syscall tracepoints.") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
James Hogan authored
commit 4915e1b0 upstream. EVA linked loads (LLE) and conditional stores (SCE) should be used on EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system call, or else the atomic set will apply to the kernel view of the virtual address space (potentially unmapped on EVA kernels) rather than the user view (TLB mapped). Signed-off-by:
-
James Hogan authored
commit 2ec420b2 upstream. The inline asm retry check in the MIPS_ATOMIC_SET operation of the sysmips system call has been backwards since commit f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler") merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying until the operation was inatomic, before returning the new value that was probably just written multiple times instead of the old value. Invert the branch condition to fix that particular issue. Fixes: f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler") Signed-off-by:
-
Maarten Lankhorst authored
commit 4086d90c upstream. All atomic state should be cleared when drm_modeset_backoff() is called, because it drops all locks and the state becomes invalid. The call to drm_atomic_state_clear was missing in atomic_remove_fb, so add the missing call there. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170629115954.26029-1-maarten.lankhorst@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: db8f6403 ("drm: Convert drm_framebuffer_remove to atomic, v4.") Signed-off-by:
-
Chuanxiao Dong authored
commit f16bd3dd upstream. There are two kinds of locking sequence. One is in the thread which is started by vfio ioctl to do the iommu unmapping. The locking sequence is: down_read(&group_lock) ----> mutex_lock(&cached_lock) The other is in the vfio release thread which will unpin all the cached pages. The lock sequence is: mutex_lock(&cached_lock) ---> down_read(&group_lock) And, the cache_lock is used to protect the rb tree of the cache node and doing vfio unpin doesn't require this lock. Move the vfio unpin out of the cache_lock protected region. v2: - use for style instead of do{}while(1). (Zhenyu) Fixes: f30437c5 ("drm/i915/gvt: add KVMGT support") Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Robin Murphy authored
commit 84c24379 upstream. Revision C of IORT now allows us to identify ARM MMU-401 and the Cavium ThunderX implementation. Wire them up so that we can probe these models once firmware starts using the new codes in place of generic ones, and so that the appropriate features and quirks get enabled when we do. For the sake of backports and mitigating sychronisation problems with the ACPICA headers, we'll carry a backup copy of the new definitions locally for the short term to make life simpler. Acked-by:
Robert Richter <rrichter@cavium.com> Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Dan Carpenter authored
commit 2e028c4f upstream. My static checker complains that if "func" is NULL then "clear_filter" is uninitialized. This seems like it could be true, although it's possible something subtle is happening that I haven't seen. kernel/trace/ftrace.c:3844 match_records() error: uninitialized symbol 'clear_filter'. Link: http://lkml.kernel.org/r/20170712073556.h6tkpjcdzjaozozs@mwanda Fixes: f0a3b154 ("ftrace: Clarify code for mod command") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Marta Rybczynska authored
commit 5e599d73 upstream. This patch improves the way the RDMA IB signalling is done by using atomic operations for the signalling variable. This avoids race conditions on sig_count. The signalling interval changes slightly and is now the largest power of two not larger than queue depth / 2. ilog() usage idea by Bart Van Assche. Signed-off-by:
Marta Rybczynska <marta.rybczynska@kalray.eu> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alex Williamson authored
commit 7f56c30b upstream. The original intent of vfio_container.group_lock is to protect vfio_container.group_list, however over time it's become a crutch to prevent changes in container composition any time we call into the iommu driver backend. This introduces problems when we start to have more complex interactions, for example when a user's DMA unmap request triggers a notification to an mdev vendor driver, who responds by attempting to unpin mappings within that request, re-entering the iommu backend. We incorrectly assume that the use of read-locks here allow for this nested locking behavior, but a poorly timed write-lock could in fact trigger a deadlock. The current use of group_lock seems to fall into the trap of locking code, not data. Correct that by removing uses of group_lock that are not directly related to group_list. Note that the vfio type1 iommu backend has its own mutex, vfio_iommu.lock, which it uses to protect itself for each of these interfaces anyway. The group_lock appears to be a redundancy for these interfaces and type1 even goes so far as to release its mutex to allow for exactly the re-entrant code path above. Reported-by:
Alex Williamson <alex.williamson@redhat.com> Acked-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Alex Williamson authored
commit 5d6dee80 upstream. At the point where the kvm-vfio pseudo device wants to release its vfio group reference, we can't always acquire a new reference to make that happen. The group can be in a state where we wouldn't allow a new reference to be added. This new helper function allows a caller to match a file to a group to facilitate this. Given a file and group, report if they match. Thus the caller needs to already have a group reference to match to the file. This allows the deletion of a group without acquiring a new reference. Signed-off-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Tested-by:
-
Alex Williamson authored
commit 811642d8 upstream. If vfio_iommu_group_notifier() acquires a group reference and that reference becomes the last reference to the group, then vfio_group_put introduces a deadlock code path where we're trying to unregister from the iommu notifier chain from within a callout of that chain. Use a work_struct to release this reference asynchronously. Signed-off-by:
-
Ville Syrjälä authored
commit ce3f7163 upstream. We have pretty clear evidence that MSIs are getting lost on g4x and somehow the interrupt logic doesn't seem to recover from that state even if we try hard to clear the IIR. Disabling IER around the normal IIR clearing in the irq handler isn't sufficient to avoid this, so the problem really seems to be further up the interrupt chain. This should guarantee that there's always an edge if any IIR bits are set after the interrupt handler is done, which should normally guarantee that the CPU interrupt is generated. That approach seems to work perfectly on VLV/CHV, but apparently not on g4x. MSI is documented to be broken on 965gm at least. The chipset spec says MSI is defeatured because interrupts can be delayed or lost, which fits well with what we're seeing on g4x. Previously we've already disabled GMBUS interrupts on g4x because somehow GMBUS manages to raise legacy interrupts even when MSI is enabled. Since there's such widespread MSI breakahge all over in the pre-gen5 land let's just give up on MSI on these platforms. Seqno reporting might be negatively affected by this since the legcy interrupts aren't guaranteed to be ordered with the seqno writes, whereas MSI interrupts may be? But an occasioanlly missed seqno seems like a small price to pay for generally working interrupts. Cc: Diego Viola <diego.viola@gmail.com> Tested-by:
Diego Viola <diego.viola@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101261Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170626203051.28480-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Hawking Zhang authored
commit b1e8b9c5 upstream. vddc_dep_on_dal_pwrl is allocated and initialized in cz_hwmgr_backend_init Thus free the memory in cz_hwmgr_backend_fini Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Amir Goldstein authored
commit 8fc646b4 upstream. On failure to prepare_creds(), mount fails with a random return value, as err was last set to an integer cast of a valid lower mnt pointer or set to 0 if inodes index feature is enabled. Reported-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit ea3dad18 upstream. When linking a file with copy up origin into a new parent, mark the new parent dir "impure". Fixes: ee1d6d37 ("ovl: mark upper dir with type origin entries "impure"") Signed-off-by:
-
Dan Carpenter authored
commit 4ab3c51e upstream. The kstrtol() function returns -ERANGE as well as -EINVAL so these tests are not enough. It's not a super serious bug, but my static checker correctly complains that the "r" variable might be used uninitialized. Fixes: 5d23188a ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Signed-off-by:
-
Dan Carpenter authored
commit 2b01bfae upstream. It looks like we intended to return an error code here, because we dereference "ascport->pinctrl" on the next lines. Fixes: 6929cb00 ("serial: st-asc: Read in all Pinctrl states") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Jaegeuk Kim authored
commit c925dc16 upstream. This patch copies commit b7f8a09f: "btrfs: Don't clear SGID when inheriting ACLs" written by Jan. Fixes: 07393101Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Reviewed-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
commit d1aa2453 upstream. generic/361 reports below warning, this is because: once, there is someone entering into critical region of sbi.cp_lock, if write_end_io. f2fs_stop_checkpoint is invoked from an triggered IRQ, we will encounter deadlock. So this patch changes to use spin_{,un}lock_irq{save,restore} to create critical region without IRQ enabled to avoid potential deadlock. irq event stamp: 83391573 loop: Write error at byte offset 438729728, length 1024. hardirqs last enabled at (83391573): [<c1809752>] restore_all+0xf/0x65 hardirqs last disabled at (83391572): [<c1809eac>] reschedule_interrupt+0x30/0x3c loop: Write error at byte offset 438860288, length 1536. softirqs last enabled at (83389244): [<c180cc4e>] __do_softirq+0x1ae/0x476 softirqs last disabled at (83389237): [<c101ca7c>] do_softirq_own_stack+0x2c/0x40 loop: Write error at byte offset 438990848, length 2048. ================================ WARNING: inconsistent lock state 4.12.0-rc2+ #30 Tainted: G O -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. xfs_io/7959 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&sbi->cp_lock)->rlock){?.+...}, at: [<f96f96cc>] f2fs_stop_checkpoint+0x1c/0x50 [f2fs] {HARDIRQ-ON-W} state was registered at: __lock_acquire+0x527/0x7b0 lock_acquire+0xae/0x220 _raw_spin_lock+0x42/0x50 do_checkpoint+0x165/0x9e0 [f2fs] write_checkpoint+0x33f/0x740 [f2fs] __f2fs_sync_fs+0x92/0x1f0 [f2fs] f2fs_sync_fs+0x12/0x20 [f2fs] sync_filesystem+0x67/0x80 generic_shutdown_super+0x27/0x100 kill_block_super+0x22/0x50 kill_f2fs_super+0x3a/0x40 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x69/0x80 exit_to_usermode_loop+0x57/0x85 do_fast_syscall_32+0x18c/0x1b0 entry_SYSENTER_32+0x4c/0x7b irq event stamp: 1957420 hardirqs last enabled at (1957419): [<c1808f37>] _raw_spin_unlock_irq+0x27/0x50 hardirqs last disabled at (1957420): [<c1809f9c>] call_function_single_interrupt+0x30/0x3c softirqs last enabled at (1953784): [<c180cc4e>] __do_softirq+0x1ae/0x476 softirqs last disabled at (1953773): [<c101ca7c>] do_softirq_own_stack+0x2c/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&sbi->cp_lock)->rlock); <Interrupt> lock(&(&sbi->cp_lock)->rlock); *** DEADLOCK *** 2 locks held by xfs_io/7959: #0: (sb_writers#13){.+.+.+}, at: [<c11fd7ca>] vfs_write+0x16a/0x190 #1: (&sb->s_type->i_mutex_key#16){+.+.+.}, at: [<f96e33f5>] f2fs_file_write_iter+0x25/0x140 [f2fs] stack backtrace: CPU: 2 PID: 7959 Comm: xfs_io Tainted: G O 4.12.0-rc2+ #30 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x5f/0x92 print_usage_bug+0x1d3/0x1dd ? check_usage_backwards+0xe0/0xe0 mark_lock+0x23d/0x280 __lock_acquire+0x699/0x7b0 ? __this_cpu_preempt_check+0xf/0x20 ? trace_hardirqs_off_caller+0x91/0xe0 lock_acquire+0xae/0x220 ? f2fs_stop_checkpoint+0x1c/0x50 [f2fs] _raw_spin_lock+0x42/0x50 ? f2fs_stop_checkpoint+0x1c/0x50 [f2fs] f2fs_stop_checkpoint+0x1c/0x50 [f2fs] f2fs_write_end_io+0x147/0x150 [f2fs] bio_endio+0x7a/0x1e0 blk_update_request+0xad/0x410 blk_mq_end_request+0x16/0x60 lo_complete_rq+0x3c/0x70 __blk_mq_complete_request_remote+0x11/0x20 flush_smp_call_function_queue+0x6d/0x120 ? debug_smp_processor_id+0x12/0x20 generic_smp_call_function_single_interrupt+0x12/0x30 smp_call_function_single_interrupt+0x25/0x40 call_function_single_interrupt+0x37/0x3c EIP: _raw_spin_unlock_irq+0x2d/0x50 EFLAGS: 00000296 CPU: 2 EAX: 00000001 EBX: d2ccc51c ECX: 00000001 EDX: c1aacebd ESI: 00000000 EDI: 00000000 EBP: c96c9d1c ESP: c96c9d18 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 ? inherit_task_group.isra.98.part.99+0x6b/0xb0 __add_to_page_cache_locked+0x1d4/0x290 add_to_page_cache_lru+0x38/0xb0 pagecache_get_page+0x8e/0x200 f2fs_write_begin+0x96/0xf00 [f2fs] ? trace_hardirqs_on_caller+0xdd/0x1c0 ? current_time+0x17/0x50 ? trace_hardirqs_on+0xb/0x10 generic_perform_write+0xa9/0x170 __generic_file_write_iter+0x1a2/0x1f0 ? f2fs_preallocate_blocks+0x137/0x160 [f2fs] f2fs_file_write_iter+0x6e/0x140 [f2fs] ? __lock_acquire+0x429/0x7b0 __vfs_write+0xc1/0x140 vfs_write+0x9b/0x190 SyS_pwrite64+0x63/0xa0 do_fast_syscall_32+0xa1/0x1b0 entry_SYSENTER_32+0x4c/0x7b EIP: 0xb7786c61 EFLAGS: 00000293 CPU: 2 EAX: ffffffda EBX: 00000003 ECX: 08416000 EDX: 00001000 ESI: 18b24000 EDI: 00000000 EBP: 00000003 ESP: bf9b36b0 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Fixes: aaec2b1d ("f2fs: introduce cp_lock to protect updating of ckpt_flags") Signed-off-by:
-
Jin Qian authored
commit 21d3f8e1 upstream. Make sure number of entires doesn't exceed max journal size. Signed-off-by:
Jin Qian <jinqian@android.com> Reviewed-by:
-
Damien Le Moal authored
commit acfd2810 upstream. clear_prefree_segments() issues small discards after discarding full segments. These small discards may not be section aligned, so not zone aligned on a zoned block device, causing __f2fs_iissue_discard_zone() to fail. Fix this by not issuing small discards for a volume mounted with the BLKZONED feature enabled. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Jaegeuk Kim authored
commit 1d7be270 upstream. This allows to freeze gc and discard threads. Signed-off-by:
-
Jin Qian authored
commit 15d3042a upstream. Make sure segno and blkoff read from raw image are valid. Signed-off-by:
Jin Qian <jinqian@google.com> [Jaegeuk Kim: adjust minor coding style] Signed-off-by:
-
