1. 29 Apr, 2015 28 commits
  2. 28 Apr, 2015 3 commits
    • Johannes Berg's avatar
      iwlwifi: mvm: force quota update update after FW restart · e7afe89f
      Johannes Berg authored
      During firmware restart, the quota command isn't calculated multiple
      times, but after the firmware restart it has to be sent, so force it.
      Otherwise the firmware crashes.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      e7afe89f
    • Emmanuel Grumbach's avatar
      iwlwifi: mvm: fix typo in CONFIG option · 6bbd5521
      Emmanuel Grumbach authored
      I forgot to rename the CPTCFG_ prefix...
      
      Fixes: 484b3d13 ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans")
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      6bbd5521
    • Eran Harary's avatar
      iwlwifi: mvm: don't power off the device between INIT and OPER firmwares · 8d193ca2
      Eran Harary authored
      Our device needs two different firmwares: the INIT firmware
      and the operational (OPER) firmware. The first one is run
      when the driver loads and it returns calibrations results
      as well as the NVM. The second one implements the WiFi
      protocol.
      
      If the wlan interface is not brought up, the device is put
      to low power state: no firmware will be running. When the
      interface is brought up, we would run the OPER firmware
      only and reuse the results of the run of the INIT firmware
      when the driver was loaded. This is changing with this
      patch.
      We now run the INIT firmware every time mac80211 calls
      start(). The penalty for that is minimal since the INIT
      firwmare run fast. I now also avoid to power down the device
      between the INIT and OPER firmware on certains buses.
      
      The motivation for this change is that there are components
      on the device (MFUART) that are triggered by the INIT
      firmware and need the device to be powered up in order to
      keep running. Powering the device down between the INIT and
      OPER firmware would stop these components and prevent them
      from running again since they are triggered by the INIT
      firmware only.
      The new flow allows this and also allows to trigger these
      components again when the interface is brought up after
      it has been brought down.
      Signed-off-by: default avatarEran Harary <eran.harary@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      8d193ca2
  3. 20 Apr, 2015 1 commit
  4. 19 Apr, 2015 4 commits
  5. 15 Apr, 2015 4 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next · 6c373ca8
      Linus Torvalds authored
      Pull networking updates from David Miller:
      
       1) Add BQL support to via-rhine, from Tino Reichardt.
      
       2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
          can support hw switch offloading.  From Floria Fainelli.
      
       3) Allow 'ip address' commands to initiate multicast group join/leave,
          from Madhu Challa.
      
       4) Many ipv4 FIB lookup optimizations from Alexander Duyck.
      
       5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
          Borkmann.
      
       6) Remove the ugly compat support in ARP for ugly layers like ax25,
          rose, etc.  And use this to clean up the neigh layer, then use it to
          implement MPLS support.  All from Eric Biederman.
      
       7) Support L3 forwarding offloading in switches, from Scott Feldman.
      
       8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
          up route lookups even further.  From Alexander Duyck.
      
       9) Many improvements and bug fixes to the rhashtable implementation,
          from Herbert Xu and Thomas Graf.  In particular, in the case where
          an rhashtable user bulk adds a large number of items into an empty
          table, we expand the table much more sanely.
      
      10) Don't make the tcp_metrics hash table per-namespace, from Eric
          Biederman.
      
      11) Extend EBPF to access SKB fields, from Alexei Starovoitov.
      
      12) Split out new connection request sockets so that they can be
          established in the main hash table.  Much less false sharing since
          hash lookups go direct to the request sockets instead of having to
          go first to the listener then to the request socks hashed
          underneath.  From Eric Dumazet.
      
      13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.
      
      14) Support stable privacy address generation for RFC7217 in IPV6.  From
          Hannes Frederic Sowa.
      
      15) Hash network namespace into IP frag IDs, also from Hannes Frederic
          Sowa.
      
      16) Convert PTP get/set methods to use 64-bit time, from Richard
          Cochran.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
        fm10k: Bump driver version to 0.15.2
        fm10k: corrected VF multicast update
        fm10k: mbx_update_max_size does not drop all oversized messages
        fm10k: reset head instead of calling update_max_size
        fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
        fm10k: update xcast mode before synchronizing multicast addresses
        fm10k: start service timer on probe
        fm10k: fix function header comment
        fm10k: comment next_vf_mbx flow
        fm10k: don't handle mailbox events in iov_event path and always process mailbox
        fm10k: use separate workqueue for fm10k driver
        fm10k: Set PF queues to unlimited bandwidth during virtualization
        fm10k: expose tx_timeout_count as an ethtool stat
        fm10k: only increment tx_timeout_count in Tx hang path
        fm10k: remove extraneous "Reset interface" message
        fm10k: separate PF only stats so that VF does not display them
        fm10k: use hw->mac.max_queues for stats
        fm10k: only show actual queues, not the maximum in hardware
        fm10k: allow creation of VLAN on default vid
        fm10k: fix unused warnings
        ...
      6c373ca8
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm · bb0fd7ab
      Linus Torvalds authored
      Pull ARM updates from Russell King:
       "Included in this update are both some long term fixes and some new
        features.
      
        Fixes:
      
         - An integer overflow in the calculation of ELF_ET_DYN_BASE.
      
         - Avoiding OOMs for high-order IOMMU allocations
      
         - SMP requires the data cache to be enabled for synchronisation
           primitives to work, so prevent the CPU_DCACHE_DISABLE option being
           visible on SMP builds.
      
         - A bug going back 10+ years in the noMMU ARM94* CPU support code,
           where it corrupts registers.  Found by folk getting Linux running
           on their cameras.
      
         - Versatile Express needs an errata workaround enabled for CPU
           hot-unplug to work.
      
        Features:
      
         - Clean up module linker by handling out of range relocations
           separately from relocation cases we don't handle.
      
         - Fix a long term bug in the pci_mmap_page_range() code, which we
           hope won't impact userspace (we hope there's no users of the
           existing broken interface.)
      
         - Don't map DMA coherent allocations when we don't have a MMU.
      
         - Drop experimental status for SMP_ON_UP.
      
         - Warn when DT doesn't specify ePAPR mandatory cache properties.
      
         - Add documentation concerning how we find the start of physical
           memory for AUTO_ZRELADDR kernels, detailing why we have chosen the
           mask and the implications of changing it.
      
         - Updates from Ard Biesheuvel to address some issues with large
           kernels (such as allyesconfig) failing to link.
      
         - Allow hibernation to work on modern (ARMv7) CPUs - this appears to
           have never worked in the past on these CPUs.
      
         - Enable IRQ_SHOW_LEVEL, which changes the /proc/interrupts output
           format (hopefully without userspace breaking...  let's hope that if
           it causes someone a problem, they tell us.)
      
         - Fix tegra-ahb DT offsets.
      
         - Rework ARM errata 643719 code (and ARMv7 flush_cache_louis()/
           flush_dcache_all()) code to be more efficient, and enable this
           errata workaround by default for ARMv7+SMP CPUs.  This complements
           the Versatile Express fix above.
      
         - Rework ARMv7 context code for errata 430973, so that only Cortex A8
           CPUs are impacted by the branch target buffer flush when this
           errata is enabled.  Also update the help text to indicate that all
           r1p* A8 CPUs are impacted.
      
         - Switch ARM to the generic show_mem() implementation, it conveys all
           the information which we were already reporting.
      
         - Prevent slow timer sources being used for udelay() - timers running
           at less than 1MHz are not useful for this, and can cause udelay()
           to return immediately, without any wait.  Using such a slow timer
           is silly.
      
         - VDSO support for 32-bit ARM, mainly for gettimeofday() using the
           ARM architected timer.
      
         - Perf support for Scorpion performance monitoring units"
      
      vdso semantic conflict fixed up as per linux-next.
      
      * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (52 commits)
        ARM: update errata 430973 documentation to cover Cortex A8 r1p*
        ARM: ensure delay timer has sufficient accuracy for delays
        ARM: switch to use the generic show_mem() implementation
        ARM: proc-v7: avoid errata 430973 workaround for non-Cortex A8 CPUs
        ARM: enable ARM errata 643719 workaround by default
        ARM: cache-v7: optimise test for Cortex A9 r0pX devices
        ARM: cache-v7: optimise branches in v7_flush_cache_louis
        ARM: cache-v7: consolidate initialisation of cache level index
        ARM: cache-v7: shift CLIDR to extract appropriate field before masking
        ARM: cache-v7: use movw/movt instructions
        ARM: allow 16-bit instructions in ALT_UP()
        ARM: proc-arm94*.S: fix setup function
        ARM: vexpress: fix CPU hotplug with CT9x4 tile.
        ARM: 8276/1: Make CPU_DCACHE_DISABLE depend on !SMP
        ARM: 8335/1: Documentation: DT bindings: Tegra AHB: document the legacy base address
        ARM: 8334/1: amba: tegra-ahb: detect and correct bogus base address
        ARM: 8333/1: amba: tegra-ahb: fix register offsets in the macros
        ARM: 8339/1: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL
        ARM: 8338/1: kexec: Relax SMP validation to improve DT compatibility
        ARM: 8337/1: mm: Do not invoke OOM for higher order IOMMU DMA allocations
        ...
      bb0fd7ab
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · bdfa54df
      Linus Torvalds authored
      Pull s390 updates from Martin Schwidefsky:
       "The major change in this merge is the removal of the support for
        31-bit kernels.  Naturally 31-bit user space will continue to work via
        the compat layer.
      
        And then some cleanup, some improvements and bug fixes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
        s390/smp: wait until secondaries are active & online
        s390/hibernate: fix save and restore of kernel text section
        s390/cacheinfo: add missing facility check
        s390/syscalls: simplify syscall_get_arch()
        s390/irq: enforce correct irqclass_sub_desc array size
        s390: remove "64" suffix from mem64.S and swsusp_asm64.S
        s390/ipl: cleanup macro usage
        s390/ipl: cleanup shutdown_action attributes
        s390/ipl: cleanup bin attr usage
        s390/uprobes: fix address space annotation
        s390: add missing arch_release_task_struct() declaration
        s390: make couple of functions and variables static
        s390/maccess: improve s390_kernel_write()
        s390/maccess: remove potentially broken probe_kernel_write()
        s390/watchdog: support for KVM hypervisors and delete pr_info messages
        s390/watchdog: enable KEEPALIVE for /dev/watchdog
        s390/dasd: remove setting of scheduler from driver
        s390/traps: panic() instead of die() on translation exception
        s390: remove test_facility(2) (== z/Architecture mode active) checks
        s390/cmpxchg: simplify cmpxchg_double
        ...
      bdfa54df
    • Linus Torvalds's avatar
      Merge tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 2481bc75
      Linus Torvalds authored
      Pull power management and ACPI updates from Rafael Wysocki:
       "These are mostly fixes and cleanups all over, although there are a few
        items that sort of fall into the new feature category.
      
        First off, we have new callbacks for PM domains that should help us to
        handle some issues related to device initialization in a better way.
      
        There also is some consolidation in the unified device properties API
        area allowing us to use that inferface for accessing data coming from
        platform initialization code in addition to firmware-provided data.
      
        We have some new device/CPU IDs in a few drivers, support for new
        chips and a new cpufreq driver too.
      
        Specifics:
      
         - Generic PM domains support update including new PM domain callbacks
           to handle device initialization better (Russell King, Rafael J
           Wysocki, Kevin Hilman)
      
         - Unified device properties API update including a new mechanism for
           accessing data provided by platform initialization code (Rafael J
           Wysocki, Adrian Hunter)
      
         - ARM cpuidle update including ARM32/ARM64 handling consolidation
           (Daniel Lezcano)
      
         - intel_idle update including support for the Silvermont Core in the
           Baytrail SOC and for the Airmont Core in the Cherrytrail and
           Braswell SOCs (Len Brown, Mathias Krause)
      
         - New cpufreq driver for Hisilicon ACPU (Leo Yan)
      
         - intel_pstate update including support for the Knights Landing chip
           (Dasaratharaman Chandramouli, Kristen Carlson Accardi)
      
         - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)
      
         - powernv cpufreq driver update (Shilpasri G Bhat)
      
         - devfreq update including Tegra support changes (Tomeu Vizoso,
           MyungJoo Ham, Chanwoo Choi)
      
         - powercap RAPL (Running-Average Power Limit) driver update including
           support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)
      
         - ACPI device enumeration update related to the handling of the
           special PRP0001 device ID allowing DT-style 'compatible' property
           to be used for ACPI device identification (Rafael J Wysocki)
      
         - ACPI EC driver update including limited _DEP support (Lan Tianyu,
           Lv Zheng)
      
         - ACPI backlight driver update including a new mechanism to allow
           native backlight handling to be forced on non-Windows 8 systems and
           a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)
      
         - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)
      
         - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
           Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)
      
         - Fixes related to suspend-to-idle for the iTCO watchdog driver and
           the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)
      
         - PM tracing support for the suspend phase of system suspend/resume
           transitions (Zhonghui Fu)
      
         - Configurable delay for the system suspend/resume testing facility
           (Brian Norris)
      
         - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"
      
      * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
        ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
        ACPI / scan: Rework modalias creation when "compatible" is present
        intel_idle: mark cpu id array as __initconst
        powercap / RAPL: mark rapl_ids array as __initconst
        powercap / RAPL: add ID for Broadwell server
        intel_pstate: Knights Landing support
        intel_pstate: remove MSR test
        cpufreq: fix qoriq uniprocessor build
        ACPI / scan: Take the PRP0001 position in the list of IDs into account
        ACPI / scan: Simplify acpi_match_device()
        ACPI / scan: Generalize of_compatible matching
        device property: Introduce firmware node type for platform data
        device property: Make it possible to use secondary firmware nodes
        PM / watchdog: iTCO: stop watchdog during system suspend
        cpufreq: hisilicon: add acpu driver
        ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
        cpufreq: powernv: Report cpu frequency throttling
        intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
        intel_idle: Update support for Silvermont Core in Baytrail SOC
        PM / devfreq: tegra: Register governor on module init
        ...
      2481bc75