As part of vm_fault_t conversion filemap_page_mkwrite() for the NOMMU case
was missed.  Now converted.

Link: http://lkml.kernel.org/r/20180828174952.GA29229@jordon-HP-15-Notebook-PCSigned-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

check_for_memory() looks a bit confusing.  First of all, we have this:

if (N_MEMORY == N_NORMAL_MEMORY)
	return;

Checking the ENUM declaration, looks like N_MEMORY canot be equal to
N_NORMAL_MEMORY.

I could not find where N_MEMORY is set to N_NORMAL_MEMORY, or the other
way around either, so unless I am missing something, this condition will
never evaluate to true.  It makes sense to get rid of it.

Moving forward, the operations within the loop look a bit confusing as
well.

We set N_HIGH_MEMORY unconditionally, and then we set N_NORMAL_MEMORY in
case we have CONFIG_HIGHMEM (N_NORMAL_MEMORY != N_HIGH_MEMORY) and zone <=
ZONE_NORMAL.  (N_HIGH_MEMORY falls back to N_NORMAL_MEMORY on
!CONFIG_HIGHMEM systems, and that is why we can just go ahead and set
N_HIGH_MEMORY unconditionally)

Although this works, it is a bit subtle.

I think that this could be easier to follow:

First, we should only set N_HIGH_MEMORY in case we have CONFIG_HIGHMEM.
And then we should set N_NORMAL_MEMORY in case zone <= ZONE_NORMAL,
without further checking whether we have CONFIG_HIGHMEM or not.

Link: http://lkml.kernel.org/r/20180828210158.4617-1-osalvador@techadventures.netSigned-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

si->swap_map[] of the swap entries in cluster needs to be cleared during
freeing.  Previously, this is done in the caller of swap_free_cluster().
This may cause code duplication (one user now, will add more users later)
and lock/unlock cluster unnecessarily.  In this patch, the clearing code
is moved to swap_free_cluster() to avoid the downside.

Link: http://lkml.kernel.org/r/20180827075535.17406-4-ying.huang@intel.comSigned-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a code cleanup patch without functionality change.

Originally, when __swap_entry_free() is called, and its return value is 0,
free_swap_slot() will always be called to free the swap entry to the
per-CPU pool.  So move the call to free_swap_slot() to __swap_entry_free()
to simplify the code.

Link: http://lkml.kernel.org/r/20180827075535.17406-3-ying.huang@intel.comSigned-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The code path to reclaim the swap entry in free_swap_and_cache() is
almost same as that of __try_to_reclaim_swap().  The largest
difference is just coding style.  So the support to the additional
requirement of free_swap_and_cache() is added into
__try_to_reclaim_swap().  free_swap_and_cache() is changed to call
__try_to_reclaim_swap(), and delete the duplicated code.  This will
improve code readability and reduce the potential bugs.

There are 2 functionality differences between __try_to_reclaim_swap()
and swap entry reclaim code of free_swap_and_cache().

- free_swap_and_cache() only reclaims the swap entry if the page is
  unmapped or swap is getting full.  The support has been added into
  __try_to_reclaim_swap().

- try_to_free_swap() (called by __try_to_reclaim_swap()) checks
  pm_suspended_storage(), while free_swap_and_cache() not.  I think
  this is OK.  Because the page and the swap entry can be reclaimed
  later eventually.

Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.comSigned-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, kmemleak only prints the number of suspected leaks to dmesg but
requires the user to read a debugfs file to get the actual stack traces of
the objects' allocation points.  Add a module option to print the full
object information to dmesg too.  It can be enabled with
kmemleak.verbose=1 on the kernel command line, or "echo 1 >
/sys/module/kmemleak/parameters/verbose":

This allows easier integration of kmemleak into test systems: We have
automated test infrastructure to test our Linux systems.  With this
option, running our tests with kmemleak is as simple as enabling kmemleak
and passing this command line option; the test infrastructure knows how to
save kernel logs, which will now include kmemleak reports.  Without this
option, the test infrastructure needs to be specifically taught to read
out the kmemleak debugfs file.  Removing this need for special handling
makes kmemleak more similar to other kernel debug options (slab debugging,
debug objects, etc).

Link: http://lkml.kernel.org/r/20180903144046.21023-1-vincent.whitchurch@axis.comSigned-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert 5ff7091f ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").

MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac7 ("mm, oom: distinguish blockable mode for
mmu notifiers").  We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.

Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If invalidate_range_start() is called for !blocking mode then all
callbacks have to guarantee they will no block/sleep.  The same obviously
applies to invalidate_range_end because this operation pairs with the
former and they are called from the same context.  Make sure this is
appropriately documented.

Link: http://lkml.kernel.org/r/20180827112623.8992-3-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tetsuo Handa has reported that it is possible to bypass the short sleep
for PF_WQ_WORKER threads which was introduced by commit 373ccbe5
("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make
any progress") and lock up the system if OOM.

The primary reason is that WQ_MEM_RECLAIM WQs are not guaranteed to run
even when they have a rescuer available.  Those workers might be essential
for reclaim to make a forward progress, however.  If we are too unlucky
all the allocations requests can get stuck waiting for a WQ_MEM_RECLAIM
work item and the system is essentially stuck in an OOM condition without
much hope to move on.  Tetsuo has seen the reclaim stuck on
drain_local_pages_wq or xlog_cil_push_work (xfs).  There might be others.

Since should_reclaim_retry() should be a natural reschedule point,
let's do the short sleep for PF_WQ_WORKER threads unconditionally in
order to guarantee that other pending work items are started.  This
will workaround this problem and it is less fragile than hunting down
when the sleep is missed.  Having a single sleeping point is more
robust.

[akpm@linux-foundation.org: reflow comment to 80 cols to save a couple of lines]
Link: http://lkml.kernel.org/r/20180827135101.15700-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I've noticed, that dying memory cgroups are often pinned in memory by a
single pagecache page.  Even under moderate memory pressure they sometimes
stayed in such state for a long time.  That looked strange.

My investigation showed that the problem is caused by applying the LRU
pressure balancing math:

  scan = div64_u64(scan * fraction[lru], denominator),

where

  denominator = fraction[anon] + fraction[file] + 1.

Because fraction[lru] is always less than denominator, if the initial scan
size is 1, the result is always 0.

This means the last page is not scanned and has
no chances to be reclaimed.

Fix this by rounding up the result of the division.

In practice this change significantly improves the speed of dying cgroups
reclaim.

[guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments]
  Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle
Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.comSigned-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memcg charge is batched using per-cpu stocks, so an offline memcg can be
pinned by a cached charge up to a moment, when a process belonging to some
other cgroup will charge some memory on the same cpu.  In other words,
cached charges can prevent a memory cgroup from being reclaimed for some
time, without any clear need.

Let's optimize it by explicit draining of all stocks on css offlining.  As
draining is performed asynchronously, and is skipped if any parallel
draining is happening, it's cheap.

Link: http://lkml.kernel.org/r/20180827162621.30187-2-guro@fb.comSigned-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If CONFIG_VMAP_STACK is set, kernel stacks are allocated using
__vmalloc_node_range() with __GFP_ACCOUNT.  So kernel stack pages are
charged against corresponding memory cgroups on allocation and uncharged
on releasing them.

The problem is that we do cache kernel stacks in small per-cpu caches and
do reuse them for new tasks, which can belong to different memory cgroups.

Each stack page still holds a reference to the original cgroup, so the
cgroup can't be released until the vmap area is released.

To make this happen we need more than two subsequent exits without forks
in between on the current cpu, which makes it very unlikely to happen.  As
a result, I saw a significant number of dying cgroups (in theory, up to 2
* number_of_cpu + number_of_tasks), which can't be released even by
significant memory pressure.

As a cgroup structure can take a significant amount of memory (first of
all, per-cpu data like memcg statistics), it leads to a noticeable waste
of memory.

Link: http://lkml.kernel.org/r/20180827162621.30187-1-guro@fb.com
Fixes: ac496bf4 ("fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Extend the slub_debug syntax to "slub_debug=<flags>[,<slub>]*", where
<slub> may contain an asterisk at the end.  For example, the following
would poison all kmalloc slabs:

	slub_debug=P,kmalloc*

and the following would apply the default flags to all kmalloc and all
block IO slabs:

	slub_debug=,bio*,kmalloc*

Please note that a similar patch was posted by Iliyan Malchev some time
ago but was never merged:

	https://marc.info/?l=linux-mm&m=131283905330474&w=2

Link: http://lkml.kernel.org/r/20180928111139.27962-1-atomlin@redhat.comSigned-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Iliyan Malchev <malchev@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE,
instead it falls back to kmalloc_large().

For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls
kmalloc_slab() for all allocations relying on NULL return value for
over-sized allocations.

This inconsistency leads to unwanted warnings from kmalloc_slab() for
over-sized allocations for slab.  Returning NULL for failed allocations is
the expected behavior.

Make slub and slab code consistent by checking size >
KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab().

While we are here also fix the check in kmalloc_slab().  We should check
against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE.  It all kinda
worked because for slab the constants are the same, and slub always checks
the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab().  But if we
get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will
happen.  For example, in case of a newly introduced bug in slub code.

Also move the check in kmalloc_slab() from function entry to the size >
192 case.  This partially compensates for the additional check in slab
code and makes slub code a bit faster (at least theoretically).

Also drop __GFP_NOWARN in the warning check.  This warning means a bug in
slab code itself, user-passed flags have nothing to do with it.

Nothing of this affects slob.

Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.comSigned-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com
Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com
Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com
Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com
Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Switch to bitmap_zalloc() to show clearly what we are allocating.  Besides
that it returns pointer of bitmap type instead of opaque void *.

Link: http://lkml.kernel.org/r/20180830104301.61649-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

What xtensa has in asm/vga.h is the same as what can be found in
asm-generic/vga.h.  So use the latter header.

Link: http://lkml.kernel.org/r/20180907132219.12979-1-jslaby@suse.czSigned-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change iomap_page_mkwrite() return type to vm_fault_t.

see commit 1c8f4220 ("mm: change return type to vm_fault_t") for
reference.

Link: http://lkml.kernel.org/r/20180827172050.GA18673@jordon-HP-15-Notebook-PCSigned-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

fs/ocfs2/refcounttree.c: In function 'ocfs2_create_reflink_node':
fs/ocfs2/refcounttree.c:4138:31: warning:
 variable 'rb' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/1536198443-113047-1-git-send-email-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel module may sleep with holding a spinlock.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse
fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse

To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.comSigned-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Null check for kfree is unnecessary, so remove it.

Link: http://lkml.kernel.org/r/1535704514-26559-1-git-send-email-dingxiang@cmss.chinamobile.comSigned-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pointer 'eb' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'eb' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/20180828141907.10826-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clang warns when more than one set of parentheses is used for a
single conditional statement:

fs/ocfs2/dlm/dlmthread.c:534:18: warning: equality comparison with extraneous
      parentheses [-Wparentheses-equality]
        if ((res->owner == dlm->node_num)) {
             ~~~~~~~~~~~^~~~~~~~~~~~~~~~
fs/ocfs2/dlm/dlmthread.c:534:18: note: remove extraneous parentheses around the
      comparison to silence this warning
        if ((res->owner == dlm->node_num)) {
            ~           ^               ~

Link: http://lkml.kernel.org/r/20180924181929.6853-1-natechancellor@gmail.comSigned-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In addition to DEFINE_HASHTABLE() add DECLARE_ variant.

Link: http://lkml.kernel.org/r/153683203215.13678.11468076350083405643.stgit@localhost.localdomainSigned-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Constantine Shulyupin <const@MakeLinux.com>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joey Pabalinas <joeypabalinas@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Arch code may have asm implementation of string/memory API functions
instead of using generic one from lib/string.c.  KASAN don't see memory
accesses in asm code, thus can miss many bugs.

E.g.  on ARM64 KASAN don't see bugs in memchr(), memcmp(), str[r]chr(),
str[n]cmp(), str[n]len().  Add tests for these functions to be sure that
we notice the problem on other architectures.

Link: http://lkml.kernel.org/r/20180920135631.23833-3-aryabinin@virtuozzo.comSigned-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM64 has asm implementation of memchr(), memcmp(), str[r]chr(),
str[n]cmp(), str[n]len().  KASAN don't see memory accesses in asm code,
thus it can potentially miss many bugs.

Ifdef out __HAVE_ARCH_* defines of these functions when KASAN is enabled,
so the generic implementations from lib/string.c will be used.

We can't just remove the asm functions because efistub uses them.  And we
can't have two non-weak functions either, so declare the asm functions as
weak.

Link: http://lkml.kernel.org/r/20180920135631.23833-2-aryabinin@virtuozzo.comSigned-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since WEAK() supposed to be used instead of ENTRY() to define weak
symbols, but unlike ENTRY() it doesn't have ALIGN directive.  It seems
there is no actual reason to not have, so let's add ALIGN to WEAK() too.

Link: http://lkml.kernel.org/r/20180920135631.23833-1-aryabinin@virtuozzo.comSigned-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Will Deacon <will.deacon@arm.com>, Catalin Marinas <catalin.marinas@arm.com>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tracing the event "fs_dax:dax_pmd_insert_mapping" with perf produces this
warning:

      [fs_dax:dax_pmd_insert_mapping] unknown op '~'

It is printed in process_op (tools/lib/traceevent/event-parse.c) because
'~' is parsed as a binary operator.

perf reads the format of fs_dax:dax_pmd_insert_mapping ("print fmt") from
/sys/kernel/debug/tracing/events/fs_dax/dax_pmd_insert_mapping/format .

The format contains:

~(((u64) ~(~(((1UL) << 12)-1)))
         ^
         \ interpreted as a binary operator by process_op().

This part is generated in the declaration of the event class
dax_pmd_insert_mapping_class in include/trace/events/fs_dax.h :

		__print_flags_u64(__entry->pfn_val & PFN_FLAGS_MASK, "|",
			PFN_FLAGS_TRACE),

This patch adds a pair of parentheses in the declaration of PFN_FLAGS_MASK
to make sure that '~' is parsed as a unary operator by perf.

The part of the format that was problematic is now:

~(((u64) (~(~(((1UL) << 12)-1))))

Now, all the '~' are parsed as unary operators.

Link: http://lkml.kernel.org/r/20181021145939.8760-1-sebhtml@videotron.qc.caSigned-off-by: Sebastien Boisvert <sebhtml@videotron.qc.ca>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Elenie Godzaridis <arangradient@gmail.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd contains howe-grown locking of the waitqueue lock, and does
not disable interrupts.  This relies on the fact that no one else takes it
from interrupt context and violates an invariat of the normal waitqueue
locking scheme.  With aio poll it is easy to trigger other locks that
disable interrupts (or are called from interrupt context).

Link: http://lkml.kernel.org/r/20181018154101.18750-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>	[4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Leonardo reports an apparent regression in 4.19-rc7:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 6032 Comm: python Not tainted 4.19.0-041900rc7-lowlatency #201810071631
 Hardware name: LENOVO 80UG/Toronto 4A2, BIOS 0XCN45WW 08/09/2018
 RIP: 0010:smaps_pte_range+0x32d/0x540
 Code: 80 00 00 00 00 74 a9 48 89 de 41 f6 40 52 40 0f 85 04 02 00 00 49 2b 30 48 c1 ee 0c 49 03 b0 98 00 00 00 49 8b 80 a0 00 00 00 <48> 8b b8 f0 00 00 00 e8 b7 ef ec ff 48 85 c0 0f 84 71 ff ff ff a8
 RSP: 0018:ffffb0cbc484fb88 EFLAGS: 00010202
 RAX: 0000000000000000 RBX: 0000560ddb9e9000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000560ddb9e9 RDI: 0000000000000001
 RBP: ffffb0cbc484fbc0 R08: ffff94a5a227a578 R09: ffff94a5a227a578
 R10: 0000000000000000 R11: 0000560ddbbe7000 R12: ffffe903098ba728
 R13: ffffb0cbc484fc78 R14: ffffb0cbc484fcf8 R15: ffff94a5a2e9cf48
 FS:  00007f6dfb683740(0000) GS:ffff94a5aaf80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000f0 CR3: 000000011c118001 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  __walk_page_range+0x3c2/0x6f0
  walk_page_vma+0x42/0x60
  smap_gather_stats+0x79/0xe0
  ? gather_pte_stats+0x320/0x320
  ? gather_hugetlb_stats+0x70/0x70
  show_smaps_rollup+0xcd/0x1c0
  seq_read+0x157/0x400
  __vfs_read+0x3a/0x180
  ? security_file_permission+0x93/0xc0
  ? security_file_permission+0x93/0xc0
  vfs_read+0x8f/0x140
  ksys_read+0x55/0xc0
  __x64_sys_read+0x1a/0x20
  do_syscall_64+0x5a/0x110
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Decoded code matched to local compilation+disassembly points to
smaps_pte_entry():

        } else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap
                                                        && pte_none(*pte))) {
                page = find_get_entry(vma->vm_file->f_mapping,
                                                linear_page_index(vma, addr));

Here, vma->vm_file is NULL.  mss->check_shmem_swap should be false in that
case, however for smaps_rollup, smap_gather_stats() can set the flag true
for one vma and leave it true for subsequent vma's where it should be
false.

To fix, reset the check_shmem_swap flag to false.  There's also related
bug which sets mss->swap to shmem_swapped, which in the context of
smaps_rollup overwrites any value accumulated from previous vma's.  Fix
that as well.

Note that the report suggests a regression between 4.17.19 and 4.19-rc7,
which makes the 4.19 series ending with commit 258f669e ("mm:
/proc/pid/smaps_rollup: convert to single value seq_file") suspicious.
But the mss was reused for rollup since 493b0e9d ("mm: add
/proc/pid/smaps_rollup") so let's play it safe with the stable backport.

Link: http://lkml.kernel.org/r/555fbd1f-4ac9-0b58-dcd4-5dc4380ff7ca@suse.cz
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201377
Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Leonardo Soares Müller <leozinho29_eu@hotmail.com>
Tested-by: Leonardo Soares Müller <leozinho29_eu@hotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc patches for 4.20-rc1.

  Loads of things here, we have new code in all of these driver
  subsystems:
   - fpga
   - stm
   - extcon
   - nvmem
   - eeprom
   - hyper-v
   - gsmi
   - coresight
   - thunderbolt
   - vmw_balloon
   - goldfish
   - soundwire
  along with lots of fixes and minor changes to other small drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
  Documentation/security-bugs: Clarify treatment of embargoed information
  lib: Fix ia64 bootloader linkage
  MAINTAINERS: Clarify UIO vs UIOVEC maintainer
  docs/uio: fix a grammar nitpick
  docs: fpga: document programming fpgas using regions
  fpga: add devm_fpga_region_create
  fpga: bridge: add devm_fpga_bridge_create
  fpga: mgr: add devm_fpga_mgr_create
  hv_balloon: Replace spin_is_locked() with lockdep
  sgi-xp: Replace spin_is_locked() with lockdep
  eeprom: New ee1004 driver for DDR4 memory
  eeprom: at25: remove unneeded 'at25_remove'
  w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
  misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
  misc: mic: fix a DMA pool free failure
  platform: goldfish: pipe: Add a blank line to separate varibles and code
  platform: goldfish: pipe: Remove redundant casting
  platform: goldfish: pipe: Call misc_deregister if init fails
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
  ...

Merge tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small number of driver core patches for 4.20-rc1.

  Not much happened here this merge window, only a very tiny number of
  patches that do:

   - add BUS_ATTR_WO() for use by drivers

   - component error path fixes

   - kernfs range check fix

   - other tiny error path fixes and const changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  devres: provide devm_kstrdup_const()
  mm: move is_kernel_rodata() to asm-generic/sections.h
  devres: constify p in devm_kfree()
  driver core: add BUS_ATTR_WO() macro
  kernfs: Fix range checks in kernfs_get_target_path
  component: fix loop condition to call unbind() if bind() fails
  drivers/base/devtmpfs.c: don't pretend path is const in delete_path
  kernfs: update comment about kernfs_path() return value

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle with many of the commits being smallish
  code fixes and improvements across the drivers.

   - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and
     rxe

   - Memory window support in hns

   - mlx5 user API 'flow mutate/steering' allows accessing the full
     packet mangling and matching machinery from user space

   - Support inter-working with verbs API calls in the 'devx' mlx5 user
     API, and provide options to use devx with less privilege

   - Modernize the use of syfs and the device interface to use attribute
     groups and cdev properly for uverbs, and clean up some of the core
     code's device list management

   - More progress on net namespaces for RDMA devices

   - Consolidate driver BAR mmapping support into core code helpers and
     rework how RDMA holds poitners to mm_struct for get_user_pages
     cases

   - First pass to use 'dev_name' instead of ib_device->name

   - Device renaming for RDMA devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits)
  IB/mlx5: Add support for extended atomic operations
  RDMA/core: Fix comment for hw stats init for port == 0
  RDMA/core: Refactor ib_register_device() function
  RDMA/core: Fix unwinding flow in case of error to register device
  ib_srp: Remove WARN_ON in srp_terminate_io()
  IB/mlx5: Allow scatter to CQE without global signaled WRs
  IB/mlx5: Verify that driver supports user flags
  IB/mlx5: Support scatter to CQE for DC transport type
  RDMA/drivers: Use core provided API for registering device attributes
  RDMA/core: Allow existing drivers to set one sysfs group per device
  IB/rxe: Remove unnecessary enum values
  RDMA/umad: Use kernel API to allocate umad indexes
  RDMA/uverbs: Use kernel API to allocate uverbs indexes
  RDMA/core: Increase total number of RDMA ports across all devices
  IB/mlx4: Add port and TID to MAD debug print
  IB/mlx4: Enable debug print of SMPs
  RDMA/core: Rename ports_parent to ports_kobj
  RDMA/core: Do not expose unsupported counters
  IB/mlx4: Refer to the device kobject instead of ports_parent
  RDMA/nldev: Allow IB device rename through RDMA netlink
  ...

Pull sparc fix from David Miller:
 "Build regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix VDSO build with older binutils.

Merge tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This patch set contains a lot (at least, for me) of improvements to
  the RISC-V kernel port:

   - The removal of some cacheinfo values that were bogus.

   - On systems with F but without D the kernel will not show the F
     extension to userspace, as it isn't actually supported.

   - Support for futexes.

   - Removal of some unused code.

   - Cleanup of some menuconfig entries.

   - Support for systems without a floating-point unit, and for building
     kernels that will never use the floating-point unit.

   - More fixes to the RV32I port, which regressed again. It's really
     time to get this into a regression test somewhere so I stop
     breaking it. Thanks to Zong for resurrecting it again!

   - Various fixes that resulted from a year old review of our original
     patch set that I finally got around to.

   - Various improvements to SMP support, largely based around having
     switched to logical hart numbering, as well as some interrupt
     improvements. This one is in the same patch set as above, thanks to
     Atish for sheparding everything though as my patch set was a bit of
     a mess.

  I'm pretty sure this is our largest patch set since the original
  kernel contribution, and it's certainly the one with the most
  contributors. While I don't have anything else I know I'm going to
  submit for the merge window, I would be somewhat surprised if I didn't
  screw anything up.

  Thanks for the help, everyone!"

* tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  RISC-V: Cosmetic menuconfig changes
  riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  RISC-V: remove the unused return_to_handler export
  RISC-V: Add futex support.
  RISC-V: Add FP register ptrace support for gdb.
  RISC-V: Mask out the F extension on systems without D
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Show IPI stats
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Use Linux logical CPU number instead of hartid
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Use mmgrab()
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  ...

Pull KVM updates from Radim Krčmář:
 "ARM:
   - Improved guest IPA space support (32 to 52 bits)

   - RAS event delivery for 32bit

   - PMU fixes

   - Guest entry hardening

   - Various cleanups

   - Port of dirty_log_test selftest

  PPC:
   - Nested HV KVM support for radix guests on POWER9. The performance
     is much better than with PR KVM. Migration and arbitrary level of
     nesting is supported.

   - Disable nested HV-KVM on early POWER9 chips that need a particular
     hardware bug workaround

   - One VM per core mode to prevent potential data leaks

   - PCI pass-through optimization

   - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base

  s390:
   - Initial version of AP crypto virtualization via vfio-mdev

   - Improvement for vfio-ap

   - Set the host program identifier

   - Optimize page table locking

  x86:
   - Enable nested virtualization by default

   - Implement Hyper-V IPI hypercalls

   - Improve #PF and #DB handling

   - Allow guests to use Enlightened VMCS

   - Add migration selftests for VMCS and Enlightened VMCS

   - Allow coalesced PIO accesses

   - Add an option to perform nested VMCS host state consistency check
     through hardware

   - Automatic tuning of lapic_timer_advance_ns

   - Many fixes, minor improvements, and cleanups"

* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
  Revert "kvm: x86: optimize dr6 restore"
  KVM: PPC: Optimize clearing TCEs for sparse tables
  x86/kvm/nVMX: tweak shadow fields
  selftests/kvm: add missing executables to .gitignore
  KVM: arm64: Safety check PSTATE when entering guest and handle IL
  KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
  arm/arm64: KVM: Enable 32 bits kvm vcpu events support
  arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
  KVM: arm64: Fix caching of host MDCR_EL2 value
  KVM: VMX: enable nested virtualization by default
  KVM/x86: Use 32bit xor to clear registers in svm.c
  kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
  kvm: vmx: Defer setting of DR6 until #DB delivery
  kvm: x86: Defer setting of CR2 until #PF delivery
  kvm: x86: Add payload operands to kvm_multiple_exception
  kvm: x86: Add exception payload fields to kvm_vcpu_events
  kvm: x86: Add has_payload and payload to kvm_queued_exception
  KVM: Documentation: Fix omission in struct kvm_vcpu_events
  KVM: selftests: add Enlightened VMCS test
  ...

Pull cgroup updates from Tejun Heo:
 "All trivial changes - simplification, typo fix and adding
  cond_resched() in a netclassid update loop"

* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, netclassid: add a preemption point to write_classid
  rdmacg: fix a typo in rdmacg documentation
  cgroup: Simplify cgroup_ancestor

Pull printk updates from Petr Mladek:

 - Fix two more locations where printf formatting leaked pointers

 - Better log_buf_len parameter handling

 - Add prefix to messages from printk code

 - Do not miss messages on other consoles when the log is replayed on a
   new one

 - Reduce race between console registration and panic() when the log
   might get replayed on all consoles

 - Some cont buffer code clean up

 - Call console only when there is something to do (log vs cont buffer)

* tag 'printk-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Hash printed address for netdev bits fallback
  lib/vsprintf: Hash legacy clock addresses
  lib/vsprintf: Prepare for more general use of ptr_to_id()
  lib/vsprintf: Make ptr argument conts in ptr_to_id()
  printk: fix integer overflow in setup_log_buf()
  printk: do not preliminary split up cont buffer
  printk: lock/unlock console only for new logbuf entries
  printk: keep kernel cont support always enabled
  printk: Give error on attempt to set log buffer length to over 2G
  printk: Add KBUILD_MODNAME and remove a redundant print prefix
  printk: Correct wrong casting
  printk: Fix panic caused by passing log_buf_len to command line
  printk: CON_PRINTBUFFER console registration is a bit racy
  printk: Do not miss new messages when replaying the log

Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...

Pull LoadPin updates from James Morris:
 "From Kees: This is a small reporting improvement and the param change
  needed for the ordering series (but since the loadpin change is
  desired and separable, I'm putting it here)"

* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LoadPin: Rename boot param "enabled" to "enforce"
  LoadPin: Report friendly block device name