Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

N.B. Leon apparently never uses initial BAR values, so it didn't matter
that we never fixed up the I/O resources from bus address to CPU addresses.

Other sparc uses pci_of_scan_bus(), which sets device resources directly
to CPU addresses, not bus addresses, so it didn't need pcibios_fixup_bus()
either.  But by telling the core about the offsets, we can nuke
pcibios_resource_to_bus().

CC: "David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: linux-parisc@vger.kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: David Howells <dhowells@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

Here's the wrinkle on Cobalt: we can't generate normal I/O port addresses
on PCI because the GT-64111 doesn't do any address translation, so we have
this:

  CPU I/O port addresses		[io 0x0000-0xffffff]
  PCI bus I/O port addresses	[io 0x10000000-0x10ffffff]

Legacy-mode IDE controllers start out with the legacy bus addresses, e.g.,
0x1f0, assigned by pci_setup_device().  These are outside the range of
addresses GT-64111 can generate on PCI, but pcibios_fixup_device_resources()
converted them to CPU addresses anyway by adding io_offset.  Therefore, we
had to pre-adjust them in cobalt_legacy_ide_fixup().

With io_offset = 0xf0000000, we had this:

  res->start = 0x1f0	initialized in pci_setup_device()
  res->start = 0x100001f0	-= io_offset in cobalt_legacy_ide_fixup()
  res->start = 0x1f0	+= io_offset in pcibios_fixup_device_resources()

The difference after this patch is that the generic pci_bus_to_resource()
only adds the offset if the bus address is inside a host bridge window.
Since 0x1f0 is not a valid bus address and is not inside any windows, it is
unaffected, so we now have this:

  region->start = 0x1f0	initialized in pci_setup_device()
  res->start = 0x1f0	no offset by pci_bus_to_resource()

That means we can remove both pcibios_fixup_device_resources() and
cobalt_legacy_ide_fixup().

I would *rather* set the host bridge offset to zero (which corresponds
to what the GT-64111 actually does), and have both CPU and PCI addresses
of [io 0x10000000-0x10ffffff].  However, that would require changes to
generic code that assumes legacy I/O addresses, such as pic1_io_resource
([io 0x0020-0x00021]), and we'd have to keep a Cobalt IDE fixup.

Of course, none of this changes the fact that references to I/O port
0x1f0 actually go to port 0x100001f0, not 0x1f0, on the Cobalt PCI bus.
Fortunately the VT82C586 IDE controller only decodes the low 24 address
bits, so it does work.

CC: Ralf Baechle <ralf@linux-mips.org>
CC: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Tony Luck <tony.luck@intel.com>
CC: Jack Steiner <steiner@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Convert from pci_scan_bus() to pci_scan_root_bus().  Supply the root
bus resources from bussoft.  When we move the resource adjustment from
pcibios_fixup_resources() to the PCI core, it will be important to have
the root bus resources correct from the beginning.

CC: Tony Luck <tony.luck@intel.com>
CC: Jack Steiner <steiner@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: linux-alpha@vger.kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This replaces the generic versions of pcibios_resource_to_bus() and
pcibios_bus_to_resource() in asm-generic/pci.h with versions that use
pci_resource_to_bus() and pci_bus_to_resource().

The replacements are equivalent except that they can apply host
bridge window offsets when the arch has supplied them by using
pci_add_resource_offset().

Each arch can convert to using pci_add_resource_offset() individually by
removing its device resource fixups from pcibios_fixup_bus() and supplying
ARCH_HAS_GENERIC_PCI_OFFSETS.  ARCH_HAS_GENERIC_PCI_OFFSETS can be removed
after all have converted.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some PCI host bridges translate CPU addresses to PCI bus addresses.
Previously, we initialized pci_dev resources with PCI bus addresses,
then converted them to CPU addresses later in arch-specific code
(pcibios_fixup_resources()), which leaves a window of time where the
pci_dev resources are incorrect.

This patch adds support in the core for this address translation.
When the arch creates the root bus, it can supply the host bridge
address translation information, and the core can use it to set the
pci_dev resources correctly from the beginning.

This gives us a way to fix the problem that quirks that run between device
discovery and pcibios_fixup_resources() fail because they use pci_dev
resources that haven't been converted.  The reference below is to one
such problem that affected ARM and ia64.

Note that this patch has no effect until an arch starts using
pci_add_resource_offset() with a non-zero offset: before that, all
all host bridge windows have a zero offset and pci_bus_to_resource()
copies the pci_bus_region directly to the struct resource.

Reference: https://lkml.org/lkml/2009/10/12/405Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some PCI host bridges apply an address offset, so bus addresses on PCI are
different from CPU addresses.  This patch adds a way for architectures to
tell the PCI core about this offset.  For example:

    LIST_HEAD(resources);
    pci_add_resource_offset(&resources, host->io_space, host->io_offset);
    pci_add_resource_offset(&resources, host->mem_space, host->mem_offset);
    pci_scan_root_bus(parent, bus, ops, sysdata, &resources);
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This adds a list of all PCI host bridges we find and a way to look up
the host bridge from a pci_dev.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

When pci_create_root_bus() adds the new struct pci_bus to the global
pci_root_buses list, the bus becomes visible to other parts of the
kernel, so it should be fully initialized.

This patch delays adding the bus to the pci_root_buses list until after
all the struct pci_bus initialization is finished.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

No architecture defines its own pci_flags, so the core symbol does not
need to be weak.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

CC: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We already use pci_flags, so this just sets pci_flags directly and removes
the intermediate step of figuring out pci_probe_only, then using it to set
pci_flags.

The PCI core provides a pci_flags definition (currently __weak), so drop
the powerpc definitions in favor of that.

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci_probe_only is set on ppc64 to prevent resource re-allocation
by the core. It's meant to be used in very specific circumstances
such as when operating under a hypervisor that may prevent such
re-allocation.

Instead of default to 1, we make it default to 0 and explicitly
set it in the few cases where we need it.

This fixes FSL PCI which wants it clear among others.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We never assign anything other than PCI_ASSIGN_ALL_BUSSES to pci_probe,
so just remove the indirection.  If configurability is required in the
future, please use the pci_flags/PCI_REASSIGN_ALL_BUS functionality
as is done for powerpc.

CC: Ralf Baechle <ralf@linux-mips.org>
CC: linux-mips@linux-mips.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some architectures (alpha, mips, powerpc) have an arch-specific
"pci_probe_only" flag.  Others use PCI_PROBE_ONLY in pci_flags for
the same purpose.  This moves mips to the pci_flags approach so
generic code can use the same test across all architectures.

CC: Ralf Baechle <ralf@linux-mips.org>
CC: linux-mips@linux-mips.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci_flags is initialized to zero and never modified (I think this was just
copied from powerpc).  Therefore, "(pci_flags & XX)" is always false and
"!(pci_flags & XX)" is always true, and we can remove all references
to pci_flags.

CC: Michal Simek <monstr@monstr.eu>
CC: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The PCI core provides a pci_flags definition (currently __weak), so drop
the arm definition in favor of that.

We EXPORT_SYMBOL(pci_flags) as arm did previously.  I'm dubious about
this: no other architecture exports it, and I didn't see any modules in
the tree that reference it.

CC: Rob Herring <rob.herring@calxeda.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some architectures (alpha, mips, powerpc) have an arch-specific
"pci_probe_only" flag.  Others use PCI_PROBE_ONLY in pci_flags for
the same purpose.  This moves alpha to the pci_flags approach so
generic code can use the same test across all architectures.

CC: linux-alpha@vger.kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add a pci_clear_flags() for cases when we statically initialize
pci_flags, then decide to clear things out later.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

If we move resource assignment functions into the core, we'll still
need a way for architectures to prevent reassignment, e.g., the
"pci_probe_only" functionality, and we'll need a generic, always
available way the core can test for that.  The "pci_flags"
arrangement used by several architectures seems like a convenient
way to do this.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The PCI fixups get executed based upon whether they are linked in. We need
to avoid executing them if we boot a dual SoC/PC type kernel on a PC class
system.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

ATOMISP on Medfield is a real PCI device which should be handled differently
than the fake PCI devices on south complex. PCI type 1 access is used for
accessing config space this also has other impact such as PM D3 delay. There
shouldn't be any need for reading base address from IUNIT via msg bus.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Langwell devices are not true pci devices, they are not subject to the 10 ms
d3 to d0 delay required by pci spec. This patch assigns d3_delay to 0 for all
langwell pci devices.

We can also power off devices that are not really used by the OS
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Add a parameter to avoid using MSI/MSI-X for PCIe native hotplug; it's
known to be buggy on some platforms.

In my environment, while shutting down, following stack trace is shown
sometimes.

  irq 16: nobody cared (try booting with the "irqpoll" option)
  Pid: 1081, comm: reboot Not tainted 3.2.0 #1
  Call Trace:
   <IRQ>  [<ffffffff810cec1d>] __report_bad_irq+0x3d/0xe0
   [<ffffffff810cee1c>] note_interrupt+0x15c/0x210
   [<ffffffff810cc485>] handle_irq_event_percpu+0xb5/0x210
   [<ffffffff810cc621>] handle_irq_event+0x41/0x70
   [<ffffffff810cf675>] handle_fasteoi_irq+0x55/0xc0
   [<ffffffff81015356>] handle_irq+0x46/0xb0
   [<ffffffff814fbe9d>] do_IRQ+0x5d/0xe0
   [<ffffffff814f146e>] common_interrupt+0x6e/0x6e
   [<ffffffff8106b040>] ? __do_softirq+0x60/0x210
   [<ffffffff8108aeb1>] ? hrtimer_interrupt+0x151/0x240
   [<ffffffff814fb5ec>] call_softirq+0x1c/0x30
   [<ffffffff810152d5>] do_softirq+0x65/0xa0
   [<ffffffff8106ae9d>] irq_exit+0xbd/0xe0
   [<ffffffff814fbf8e>] smp_apic_timer_interrupt+0x6e/0x99
   [<ffffffff814f9e5e>] apic_timer_interrupt+0x6e/0x80
   <EOI>  [<ffffffff814f0fb1>] ? _raw_spin_unlock_irqrestore+0x11/0x20
   [<ffffffff812629fc>] pci_bus_write_config_word+0x6c/0x80
   [<ffffffff81266fc2>] pci_intx+0x52/0xa0
   [<ffffffff8127de3d>] pci_intx_for_msi+0x1d/0x30
  [<ffffffff8127e4fb>] pci_msi_shutdown+0x7b/0x110
   [<ffffffff81269d34>] pci_device_shutdown+0x34/0x50
   [<ffffffff81326c4f>] device_shutdown+0x2f/0x140
   [<ffffffff8107b981>] kernel_restart_prepare+0x31/0x40
   [<ffffffff8107b9e6>] kernel_restart+0x16/0x60
   [<ffffffff8107bbfd>] sys_reboot+0x1ad/0x220
   [<ffffffff814f4b90>] ? do_page_fault+0x1e0/0x460
   [<ffffffff811942d0>] ? __sync_filesystem+0x90/0x90
   [<ffffffff8105c9aa>] ? __cond_resched+0x2a/0x40
   [<ffffffff814ef090>] ? _cond_resched+0x30/0x40
   [<ffffffff81169e17>] ? iterate_supers+0xb7/0xd0
   [<ffffffff814f9382>] system_call_fastpath+0x16/0x1b
  handlers:
  [<ffffffff8138a0f0>] usb_hcd_irq
  [<ffffffff8138a0f0>] usb_hcd_irq
  [<ffffffff8138a0f0>] usb_hcd_irq
  Disabling IRQ #16

An un-wanted interrupt is generated when PCI driver switches from
MSI/MSI-X to INTx while shutting down the device.  The interrupt does
not happen if MSI/MSI-X is not used on the device.
I confirmed that this problem does not happen if pcie_hp=nomsi was
specified and hotplug operation worked fine as usual.

v2: Automatically disable MSI/MSI-X against following device:
    PCI bridge: Integrated Device Technology, Inc. Device 807f (rev 02)
v3: Based on the review comment, combile the if statements.
v4: Removed module parameter.
    Move some code to build pciehp as a module.
    Move device specific code to driver/pci/quirks.c.
v5: Drop a device specific code until getting a vendor statement.
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Only one user in driver/pci/pci.c, so we don't need to put it in global
pci.h
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

unreferenced object 0xffff880276d17700 (size 64):
  comm "swapper/0", pid 1, jiffies 4294897182 (age 3976.028s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 18 f9 de 76 02 88 ff ff  ...........v....
    10 00 00 00 0e 00 00 00 0f 28 40 00 00 00 00 00  .........(@.....
  backtrace:
    [<ffffffff81c8aede>] kmemleak_alloc+0x26/0x43
    [<ffffffff811385f0>] __kmalloc+0x121/0x183
    [<ffffffff813cf821>] pci_add_cap_save_buffer+0x35/0x7c
    [<ffffffff813d12b7>] pci_allocate_cap_save_buffers+0x1d/0x65
    [<ffffffff813cdb52>] pci_device_add+0x92/0xf1
    [<ffffffff81c8afe6>] pci_scan_single_device+0x9f/0xa1
    [<ffffffff813cdbd2>] pci_scan_slot.part.20+0x21/0x106
    [<ffffffff813cdce2>] pci_scan_slot+0x2b/0x35
    [<ffffffff81c8dae4>] __pci_scan_child_bus+0x51/0x107
    [<ffffffff81c8d75b>] pci_scan_bridge+0x376/0x6ae
    [<ffffffff81c8db60>] __pci_scan_child_bus+0xcd/0x107
    [<ffffffff81c8dbab>] pci_scan_child_bus+0x11/0x2a
    [<ffffffff81cca58c>] pci_acpi_scan_root+0x18b/0x21c
    [<ffffffff81c916be>] acpi_pci_root_add+0x1e1/0x42a
    [<ffffffff81406210>] acpi_device_probe+0x50/0x190
    [<ffffffff814a0227>] really_probe+0x99/0x126

Need to free saved_buffer for capabilities.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Found debug print of class is shifted.

| pci 0000:f8:15.2: [8086:2b56] type 0 class 0x000600

Code is trying to print class with 6 digits, but use shifted class with
4 digits valid value as variable.

Change to original dev->class directly.

Also remove not needed calculating of local variable class, because it
will be updated after pci_fixup_device(pci_fixup_early...)

Also unify type print out when class and header is not matched.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Otherwise when rescan is used for cardbus, assigned resources will get
cleared.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

We should not set the requested size to -2; that will confuse the
resource list sorting with align when SIZEALIGN is used.

Change to STARTALIGN and pass align from start;  we are safe to do that
just as we do that regular pci bridge.  In the long run, we should just
treat cardbus like a regular pci bridge.

Also fix the case when realloc_head is not passed: we should keep the
requested size.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Some BIOSes enable prefetch on both MEM0 and MEM1.  But the cardbus code
assumes MEM1 is non-pref...

Discussion could be found at:
	https://lkml.org/lkml/2012/1/12/1
	https://bugzilla.kernel.org/show_bug.cgi?id=41622#c23Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>