Commit 68b99e94 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code.  Arguably,
getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.

Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>

Pull more thermal control updates from Rafael Wysocki:
 "These fix assorted issues in the thermal core and ARM thermal drivers.

  Specifics:

   - Use platform data to get the sensor ID instead of parsing the
     device in imx_sc thermal driver and remove the dedicated OF
     function from the core code (Daniel Lezcano).

   - Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
     Cameron).

   - Add missing const annotation to the RCar ops thermal driver (Lad
     Prabhakar).

   - Drop duplicate parameter check from
     thermal_zone_device_register_with_trips() (Lad Prabhakar).

   - Fix NULL pointer dereference in trip_point_temp_store() by making
     it check if the ->set_trip_temp() operation is present (Lad
     Prabhakar).

   - Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
     driver (Vincent Knecht)"

* tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
  thermal/core: Add a check before calling set_trip_temp()
  thermal/core: Drop valid pointer check for type
  thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
  thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
  thermal/of: Remove the thermal_zone_of_get_sensor_id() function
  thermal/drivers/imx_sc: Rely on the platform data to get the resource id

Pull more power management updates from Rafael Wysocki:
 "These update the turbostat utility, extend the macros used for
  defining device power management callbacks and add a diagnostic
  message to the generic power domains code.

  Specifics:

   - Add an error message to be printed when a power domain marked as
     "always on" is not actually on during initialization (Johan
     Hovold).

   - Extend macros used for defining power management callbacks to allow
     conditional exporting of noirq and late/early suspend/resume PM
     callbacks (Paul Cercueil).

   - Update the turbostat utility:
      - Add support for two new platforms (Zhang Rui).
      - Adjust energy unit for Sapphire Rapids (Zhang Rui).
      - Do not dump TRL if turbo is not supported (Artem Bityutskiy)"

* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power turbostat: version 2022.10.04
  tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
  tools/power turbostat: Do not dump TRL if turbo is not supported
  tools/power turbostat: Add support for MeteorLake platforms
  tools/power turbostat: Add support for RPL-S
  PM: Improve EXPORT_*_DEV_PM_OPS macros
  PM: domains: log failures to register always-on domains

Pull more ACPI updates from Rafael Wysocki:
 "These fix two issues, in APEI and in the int3472 driver, clean up the
  ACPI thermal driver, add ACPI support for non-GPE system wakeup events
  and make the system reboot code use the S5 (system off) state by
  default.

  Specifics:

   - Fix ACPI device object reference counting in (recently updated)
     skl_int3472_fill_clk_pdata() (Andy Shevchenko).

   - Fix a memory leak in APEI by avoiding to add a task_work to kernel
     threads running when an asynchronous error is detected (Shuai Xue).

   - Add ACPI support for handling system wakeups via GPIO wake capable
     IRQs in addition to GPEs (Raul E Rangel).

   - Make the system reboot code put ACPI-enabled systems into the S5
     (system off) state which is necessary for some platforms to work as
     expected (Kai-Heng Feng).

   - Make the white space usage in the ACPI thermal driver more
     consistent and drop redundant code from it (Rafael Wysocki)"

* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Drop some redundant code
  ACPI: thermal: Drop redundant parens from expressions
  ACPI: thermal: Use white space more consistently
  platform/x86: int3472: Don't leak reference on error
  ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
  PM: ACPI: reboot: Reinstate S5 for reboot
  kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
  ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
  i2c: acpi: Use ACPI wake capability bit to set wake_irq
  ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
  gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get

Pull dma-mapping updates from Christoph Hellwig:

 - fix a regression in the ARM dma-direct conversion (Christoph Hellwig)

 - use memcpy_{from,to}_page (Fabio M. De Francesco)

 - cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)

 - make SG table pool allocation less fragile (Masahiro Yamada)

 - don't panic on swiotlb initialization failure (Robin Murphy)

* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
  ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
  ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
  lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
  MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
  swiotlb: don't panic!
  swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()

Pull iommu updates from Joerg Roedel:

 - remove the bus_set_iommu() interface which became unnecesary because
   of IOMMU per-device probing

 - make the dma-iommu.h header private

 - Intel VT-d changes from Lu Baolu:
	  - Decouple PASID and PRI from SVA
	  - Add ESRTPS & ESIRTPS capability check
	  - Cleanups

 - Apple DART support for the M1 Pro/MAX SOCs

 - support for AMD IOMMUv2 page-tables for the DMA-API layer.

   The v2 page-tables are compatible with the x86 CPU page-tables. Using
   them for DMA-API prepares support for hardware-assisted IOMMU
   virtualization

 - support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver

 - some smaller fixes and cleanups

* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
  iommu/vt-d: Avoid unnecessary global DMA cache invalidation
  iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
  iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
  iommu/vt-d: Remove pasid_set_eafe()
  iommu/vt-d: Decouple PASID & PRI enabling from SVA
  iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
  dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
  iommu: dart: Support t6000 variant
  iommu/io-pgtable-dart: Add DART PTE support for t6000
  iommu/io-pgtable: Add DART subpage protection support
  iommu/io-pgtable: Move Apple DART support to its own file
  iommu/mediatek: Add support for MT6795 Helio X10 M4Us
  iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
  dt-bindings: mediatek: Add bindings for MT6795 M4U
  iommu/iova: Fix module config properly
  iommu/amd: Fix sparse warning
  iommu/amd: Remove outdated comment
  iommu/amd: Free domain ID after domain_flush_pages
  iommu/amd: Free domain id in error path
  iommu/virtio: Fix compile error with viommu_capable()
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Fix node refcounting in of_find_last_cache_level()

   - Constify device_node in of_device_compatible_match()

   - Fix 'dma-ranges' handling in bus controller nodes

   - Fix handling of initrd start > end

   - Improve error reporting in of_irq_init()

   - Taint kernel on DT unittest running

   - Use strscpy instead of strlcpy

   - Add a build target, dt_compatible_check, to check for compatible
     strings used in kernel sources against compatible strings in DT
     schemas.

   - Handle DT_SCHEMA_FILES changes when rebuilding

  DT bindings:

   - LED bindings for MT6370 PMIC

   - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
     mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
     and arm,versatile-sysreg to DT schema format

   - Add nvmem cells to u-boot,env schema

   - Add more LED_COLOR_ID definitions

   - Require 'opp-table' uses to be a node

   - Various schema fixes to match QEMU 'virt' DT usage

   - Tree wide dropping of redundant 'Device Tree Binding' in schema
     titles

   - More (unevaluated|additional)Properties fixes in schema child nodes

   - Drop various redundant minItems equal to maxItems"

* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
  of: base: Shift refcount decrement in of_find_last_cache_level()
  dt-bindings: leds: Add MediaTek MT6370 flashlight
  dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  dt-bindings: mailbox: Convert mtk-gce to DT schema
  of: base: make of_device_compatible_match() accept const device node
  of: Fix "dma-ranges" handling for bus controllers
  of: fdt: Remove unused struct fdt_scan_status
  dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
  dt-bindings: timer: Add power-domains for TI timer-dm on K3
  dt: Add a check for undocumented compatible strings in kernel
  kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
  dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
  dt-bindings: i2c: migrate mt7621 text bindings to YAML
  dt-bindings: power: gpcv2: correct patternProperties
  dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
  dt-bindings: timer: arm,arch_timer: Allow dual compatible string
  dt-bindings: arm: cpus: Add kryo240 compatible
  dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
  dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
  dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
  ...

Pull tpm updates from Jarkko Sakkinen:
 "Just a few bug fixes this time"

* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
  security/keys: Remove inconsistent __user annotation
  char: move from strlcpy with unused retval to strscpy

Pull crypto updates from Herbert Xu:
 "API:
   - Feed untrusted RNGs into /dev/random
   - Allow HWRNG sleeping to be more interruptible
   - Create lib/utils module
   - Setting private keys no longer required for akcipher
   - Remove tcrypt mode=1000
   - Reorganised Kconfig entries

  Algorithms:
   - Load x86/sha512 based on CPU features
   - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher

  Drivers:
   - Add HACE crypto driver aspeed"

* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: aspeed - Remove redundant dev_err call
  crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
  crypto: aead - Remove unused inline functions from aead
  crypto: bcm - Simplify obtain the name for cipher
  crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
  hwrng: core - start hwrng kthread also for untrusted sources
  crypto: zip - remove the unneeded result variable
  crypto: qat - add limit to linked list parsing
  crypto: octeontx2 - Remove the unneeded result variable
  crypto: ccp - Remove the unneeded result variable
  crypto: aspeed - Fix check for platform_get_irq() errors
  crypto: virtio - fix memory-leak
  crypto: cavium - prevent integer overflow loading firmware
  crypto: marvell/octeontx - prevent integer overflows
  crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
  crypto: hisilicon/qm - fix the qos value initialization
  crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
  crypto: tcrypt - add async speed test for aria cipher
  crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
  crypto: aria - prepare generic module for optimized implementations
  ...

Pull bitmap updates from Yury Norov:

 - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)

 - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)

   This series cleans that mess and adds new config FORCE_NR_CPUS that
   allows to optimize cpumask subsystem if the number of CPUs is known
   at compile-time.

 - optimize find_bit() functions (me)

   Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
   macros.

 - add find_nth_bit() (me)

   Adds find_nth_bit(), which is ~70 times faster than bitcounting with
   for_each() loop:

	for_each_set_bit(bit, mask, size)
		if (n-- == 0)
			return bit;

   Also adds bitmap_weight_and() to let people replace this pattern:

	tmp = bitmap_alloc(nbits);
	bitmap_and(tmp, map1, map2, nbits);
	weight = bitmap_weight(tmp, nbits);
	bitmap_free(tmp);

   with a single bitmap_weight_and() call.

 - repair cpumask_check() (me)

   After switching cpumask to use nr_cpu_ids, cpumask_check() started
   generating many false-positive warnings. This series fixes it.

 - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
   Schneider)

   Extends the API with one more function and applies it in sched/core.

* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
  sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
  lib/test_cpumask: Add for_each_cpu_and(not) tests
  cpumask: Introduce for_each_cpu_andnot()
  lib/find_bit: Introduce find_next_andnot_bit()
  cpumask: fix checking valid cpu range
  lib/bitmap: add tests for for_each() loops
  lib/find: optimize for_each() macros
  lib/bitmap: introduce for_each_set_bit_wrap() macro
  lib/find_bit: add find_next{,_and}_bit_wrap
  cpumask: switch for_each_cpu{,_not} to use for_each_bit()
  net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
  cpumask: add cpumask_nth_{,and,andnot}
  lib/bitmap: remove bitmap_ord_to_pos
  lib/bitmap: add tests for find_nth_bit()
  lib: add find_nth{,_and,_andnot}_bit()
  lib/bitmap: add bitmap_weight_and()
  lib/bitmap: don't call __bitmap_weight() in kernel code
  tools: sync find_bit() implementation
  lib/find_bit: optimize find_next_bit() functions
  lib/find_bit: create find_first_zero_bit_le()
  ...

Pull tracing updates from Steven Rostedt:
 "Major changes:

   - Changed location of tracing repo from personal git repo to:
     git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git

   - Added Masami Hiramatsu as co-maintainer

   - Updated MAINTAINERS file to separate out FTRACE as it is more than
     just TRACING.

  Minor changes:

   - Added Mark Rutland as FTRACE reviewer

   - Updated user_events to make it on its way to remove the BROKEN tag.
     The changes should now be acceptable but will run it through a
     cycle and hopefully we can remove the BROKEN tag next release.

   - Added filtering to eprobes

   - Added a delta time to the benchmark trace event

   - Have the histogram and filter callbacks called via a switch
     statement instead of indirect functions. This speeds it up to avoid
     retpolines.

   - Add a way to wake up ring buffer waiters waiting for the ring
     buffer to fill up to its watermark.

   - New ioctl() on the trace_pipe_raw file to wake up ring buffer
     waiters.

   - Wake up waiters when the ring buffer is disabled. A reader may
     block when the ring buffer is disabled, but if it was blocked when
     the ring buffer is disabled it should then wake up.

  Fixes:

   - Allow splice to read partially read ring buffer pages. This fixes
     splice never moving forward.

   - Fix inverted compare that made the "shortest" ring buffer wait
     queue actually the longest.

   - Fix a race in the ring buffer between resetting a page when a
     writer goes to another page, and the reader.

   - Fix ftrace accounting bug when function hooks are added at boot up
     before the weak functions are set to "disabled".

   - Fix bug that freed a user allocated snapshot buffer when enabling a
     tracer.

   - Fix possible recursive locks in osnoise tracer

   - Fix recursive locking direct functions

   - Other minor clean ups and fixes"

* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
  ftrace: Create separate entry in MAINTAINERS for function hooks
  tracing: Update MAINTAINERS to reflect new tracing git repo
  tracing: Do not free snapshot if tracer is on cmdline
  ftrace: Still disable enabled records marked as disabled
  tracing/user_events: Move pages/locks into groups to prepare for namespaces
  tracing: Add Masami Hiramatsu as co-maintainer
  tracing: Remove unused variable 'dups'
  MAINTAINERS: add myself as a tracing reviewer
  ring-buffer: Fix race between reset page and reading page
  tracing/user_events: Update ABI documentation to align to bits vs bytes
  tracing/user_events: Use bits vs bytes for enabled status page data
  tracing/user_events: Use refcount instead of atomic for ref tracking
  tracing/user_events: Ensure user provided strings are safely formatted
  tracing/user_events: Use WRITE instead of READ for io vector import
  tracing/user_events: Use NULL for strstr checks
  tracing: Fix spelling mistake "preapre" -> "prepare"
  tracing: Wake up waiters when tracing is disabled
  tracing: Add ioctl() to force ring buffer waiters to wake up
  tracing: Wake up ring buffer waiters on closing of the file
  ring-buffer: Add ring_buffer_wake_waiters()
  ...

Pull sysctl updates from Luis Chamberlain:
 "Just some boring cleanups on the sysctl front for this release"

* tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred}
  kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c
  sysctl: remove max_extfrag_threshold
  kernel/sysctl.c: remove unnecessary (void*) conversions
  proc: remove initialization assignment

This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 99bd9956 ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull module updates from Luis Chamberlain:

 - minor enhancement for sysfs compression string (David Disseldorp)

 - debugfs interface to view unloaded tainted modules (Aaron Tomlin)

* tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module/decompress: generate sysfs string at compile time
  module: Add debugfs interface to view unloaded tainted modules

Pull Kbuild updates from Masahiro Yamada:

 - Remove potentially incomplete targets when Kbuid is interrupted by
   SIGINT etc in case GNU Make may miss to do that when stderr is piped
   to another program.

 - Rewrite the single target build so it works more correctly.

 - Fix rpm-pkg builds with V=1.

 - List top-level subdirectories in ./Kbuild.

 - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
   kallsyms.

 - Avoid two different modules in lib/zstd/ having shared code, which
   potentially causes building the common code as build-in and modular
   back-and-forth.

 - Unify two modpost invocations to optimize the build process.

 - Remove head-y syntax in favor of linker scripts for placing
   particular sections in the head of vmlinux.

 - Bump the minimal GNU Make version to 3.82.

 - Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  docs: bump minimal GNU Make version to 3.82
  ia64: simplify esi object addition in Makefile
  Revert "kbuild: Check if linker supports the -X option"
  kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
  kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
  zstd: Fixing mixed module-builtin objects
  kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
  kallsyms: take the input file instead of reading stdin
  kallsyms: drop duplicated ignore patterns from kallsyms.c
  kbuild: reuse mksysmap output for kallsyms
  mksysmap: update comment about __crc_*
  kbuild: remove head-y syntax
  kbuild: use obj-y instead extra-y for objects placed at the head
  kbuild: hide error checker logs for V=1 builds
  kbuild: re-run modpost when it is updated
  kbuild: unify two modpost invocations
  kbuild: move vmlinux.o rule to the top Makefile
  kbuild: move .vmlinux.objs rule to Makefile.modpost
  kbuild: list sub-directories in ./Kbuild
  Makefile.compiler: replace cc-ifversion with compiler-specific macros
  ...

Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Fix race between fork and livepatch transition revert

 - Add sysfs entry that shows "patched" state for each object (module)
   that can be livepatched by the given livepatch

 - Some clean up

* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: add sysfs test
  livepatch: add sysfs entry "patched" for each klp_object
  selftests/livepatch: normalize sysctl error message
  livepatch: Add a missing newline character in klp_module_coming()
  livepatch: fix race between fork and KLP transition

Pull printk updates from Petr Mladek:

 - Initialize pointer hashing using the system workqueue. It avoids
   taking locks in printk()/vsprintf() code path

 - Misc code clean up

* tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Mark __printk percpu data ready __ro_after_init
  printk: Remove bogus comment vs. boot consoles
  printk: Remove write only variable nr_ext_console_drivers
  printk: Declare log_wait properly
  printk: Make pr_flush() static
  lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.
  lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().
  lib/vnsprintf: add const modifier for param 'bitmap'

Pull cgroup updates from Tejun Heo:

 - cpuset now support isolated cpus.partition type, which will enable
   dynamic CPU isolation

 - pids.peak added to remember the max number of pids used

 - holes in cgroup namespace plugged

 - internal cleanups

* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
  cgroup: use strscpy() is more robust and safer
  iocost_monitor: reorder BlkgIterator
  cgroup: simplify code in cgroup_apply_control
  cgroup: Make cgroup_get_from_id() prettier
  cgroup/cpuset: remove unreachable code
  cgroup: Remove CFTYPE_PRESSURE
  cgroup: Improve cftype add/rm error handling
  kselftest/cgroup: Add cpuset v2 partition root state test
  cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
  cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
  cgroup/cpuset: Relocate a code block in validate_change()
  cgroup/cpuset: Show invalid partition reason string
  cgroup/cpuset: Add a new isolated cpus.partition type
  cgroup/cpuset: Relax constraints to partition & cpus changes
  cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
  cgroup/cpuset: Miscellaneous cleanups & add helper functions
  cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
  cgroup: add pids.peak interface for pids controller
  cgroup: Remove data-race around cgrp_dfl_visible
  cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
  ...

Pull random number generator updates from Jason Donenfeld:

 - Huawei reported that when they updated their kernel from 4.4 to
   something much newer, some userspace code they had broke, the culprit
   being the accidental removal of O_NONBLOCK from /dev/random way back
   in 5.6. It's been gone for over 2 years now and this is the first
   we've heard of it, but userspace breakage is userspace breakage, so
   O_NONBLOCK is now back.

 - Use randomness from hardware RNGs much more often during early boot,
   at the same interval that crng reseeds are done, from Dominik.

 - A semantic change in hardware RNG throttling, so that the hwrng
   framework can properly feed random.c with randomness from hardware
   RNGs that aren't specifically marked as creditable.

   A related patch coming to you via Herbert's hwrng tree depends on
   this one, not to compile, but just to function properly, so you may
   want to merge this PULL before that one.

 - A fix to clamp credited bits from the interrupts pool to the size of
   the pool sample. This is mainly just a theoretical fix, as it'd be
   pretty hard to exceed it in practice.

 - Oracle reported that InfiniBand TCP latency regressed by around
   10-15% after a change a few cycles ago made at the request of the RT
   folks, in which we hoisted a somewhat rare operation (1 in 1024
   times) out of the hard IRQ handler and into a workqueue, a pretty
   common and boring pattern.

   It turns out, though, that scheduling a worker from there has
   overhead of its own, whereas scheduling a timer on that same CPU for
   the next jiffy amortizes better and doesn't incur the same overhead.

   I also eliminated a cache miss by moving the work_struct (and
   subsequently, the timer_list) to below a critical cache line, so that
   the more critical members that are accessed on every hard IRQ aren't
   split between two cache lines.

 - The boot-time initialization of the RNG has been split into two
   approximate phases: what we can accomplish before timekeeping is
   possible and what we can accomplish after.

   This winds up being useful so that we can use RDRAND to seed the RNG
   before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
   addition to other early uses of randomness. The effect is that
   systems with RDRAND (or a bootloader seed) will never see any
   warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
   kfence benefits from getting a better seed of its own.

 - Small systems without much entropy sometimes wind up putting some
   truncated serial number read from flash into hostname, so contribute
   utsname changes to the RNG, without crediting.

 - Add smaller batches to serve requests for smaller integers, and make
   use of them when people ask for random numbers bounded by a given
   compile-time constant. This has positive effects all over the tree,
   most notably in networking and kfence.

 - The original jitter algorithm intended (I believe) to schedule the
   timer for the next jiffy, not the next-next jiffy, yet it used
   mod_timer(jiffies + 1), which will fire on the next-next jiffy,
   instead of what I believe was intended, mod_timer(jiffies), which
   will fire on the next jiffy. So fix that.

 - Fix a comment typo, from William.

* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: clear new batches when bringing new CPUs online
  random: fix typos in get_random_bytes() comment
  random: schedule jitter credit for next jiffy, not in two jiffies
  prandom: make use of smaller types in prandom_u32_max
  random: add 8-bit and 16-bit batches
  utsname: contribute changes to RNG
  random: use init_utsname() instead of utsname()
  kfence: use better stack hash seed
  random: split initialization into early step and later step
  random: use expired timer rather than wq for mixing fast pool
  random: avoid reading two cache lines on irq randomness
  random: clamp credited irq bits to maximum mixed
  random: throttle hwrng writes if no entropy is credited
  random: use hwgenerator randomness more frequently at early boot
  random: restore O_NONBLOCK support

Pull slab fixes from Vlastimil Babka:

 - The "common kmalloc v4" series [1] by Hyeonggon Yoo.

   While the plan after LPC is to try again if it's possible to get rid
   of SLOB and SLAB (and if any critical aspect of those is not possible
   to achieve with SLUB today, modify it accordingly), it will take a
   while even in case there are no objections.

   Meanwhile this is a nice cleanup and some parts (e.g. to the
   tracepoints) will be useful even if we end up with a single slab
   implementation in the future:

      - Improves the mm/slab_common.c wrappers to allow deleting
        duplicated code between SLAB and SLUB.

      - Large kmalloc() allocations in SLAB are passed to page allocator
        like in SLUB, reducing number of kmalloc caches.

      - Removes the {kmem_cache_alloc,kmalloc}_node variants of
        tracepoints, node id parameter added to non-_node variants.

 - Addition of kmalloc_size_roundup()

   The first two patches from a series by Kees Cook [2] that introduce
   kmalloc_size_roundup(). This will allow merging of per-subsystem
   patches using the new function and ultimately stop (ab)using ksize()
   in a way that causes ongoing trouble for debugging functionality and
   static checkers.

 - Wasted kmalloc() memory tracking in debugfs alloc_traces

   A patch from Feng Tang that enhances the existing debugfs
   alloc_traces file for kmalloc caches with information about how much
   space is wasted by allocations that needs less space than the
   particular kmalloc cache provides.

 - My series [3] to fix validation races for caches with enabled
   debugging:

      - By decoupling the debug cache operation more from non-debug
        fastpaths, extra locking simplifications were possible and thus
        done afterwards.

      - Additional cleanup of PREEMPT_RT specific code on top, by Thomas
        Gleixner.

      - A late fix for slab page leaks caused by the series, by Feng
        Tang.

 - Smaller fixes and cleanups:

      - Unneeded variable removals, by ye xingchen

      - A cleanup removing a BUG_ON() in create_unique_id(), by Chao Yu

Link: https://lore.kernel.org/all/20220817101826.236819-1-42.hyeyoo@gmail.com/ [1]
Link: https://lore.kernel.org/all/20220923202822.2667581-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/all/20220823170400.26546-1-vbabka@suse.cz/ [3]

* tag 'slab-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (30 commits)
  mm/slub: fix a slab missed to be freed problem
  slab: Introduce kmalloc_size_roundup()
  slab: Remove __malloc attribute from realloc functions
  mm/slub: clean up create_unique_id()
  mm/slub: enable debugging memory wasting of kmalloc
  slub: Make PREEMPT_RT support less convoluted
  mm/slub: simplify __cmpxchg_double_slab() and slab_[un]lock()
  mm/slub: convert object_map_lock to non-raw spinlock
  mm/slub: remove slab_lock() usage for debug operations
  mm/slub: restrict sysfs validation to debug caches and make it safe
  mm/sl[au]b: check if large object is valid in __ksize()
  mm/slab_common: move declaration of __ksize() to mm/slab.h
  mm/slab_common: drop kmem_alloc & avoid dereferencing fields when not using
  mm/slab_common: unify NUMA and UMA version of tracepoints
  mm/sl[au]b: cleanup kmem_cache_alloc[_node]_trace()
  mm/sl[au]b: generalize kmalloc subsystem
  mm/slub: move free_debug_processing() further
  mm/sl[au]b: introduce common alloc/free functions without tracepoint
  mm/slab: kmalloc: pass requests larger than order-1 page to page allocator
  mm/slab_common: cleanup kmalloc_large()
  ...

Pull timer updates from Thomas Gleixner:
 "A boring time, timekeeping, timers update:

   - No core code changes

   - No new clocksource/event driver

   - Cleanup of the TI DM clocksource/event driver

   - The usual set of device tree binding updates

   - Small improvement, fixes and cleanups all over the place"

* tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  clocksource/drivers/arm_arch_timer: Fix CNTPCT_LO and CNTVCT_LO value
  clocksource/drivers/imx-sysctr: handle nxp,no-divider property
  dt-bindings: timer: nxp,sysctr-timer: add nxp,no-divider property
  clocksource/drivers/timer-ti-dm: Get clock in probe with devm_clk_get()
  clocksource/drivers/timer-ti-dm: Add flag to detect omap1
  clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver
  clocksource/drivers/timer-ti-dm: Use runtime PM directly and check errors
  clocksource/drivers/timer-ti-dm: Move private defines to the driver
  clocksource/drivers/timer-ti-dm: Simplify register access further
  clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()
  clocksource/drivers/timer-ti-dm: Simplify register reads with dmtimer_read()
  clocksource/drivers/timer-ti-dm: Drop unused functions
  clocksource/drivers/timer-gxp: Add missing error handling in gxp_timer_probe
  clocksource/drivers/arm_arch_timer: Fix handling of ARM erratum 858921
  clocksource/drivers/exynos_mct: Enable building on ARTPEC
  clocksource/drivers/exynos_mct: Support local-timers property
  clocksource/drivers/exynos_mct: Support frc-shared property
  dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support
  clocksource/drivers/sun4i: Add definition of clear interrupt
  clocksource/drivers/renesas-ostm: Add support for RZ/V2L SoC
  ...

Pull preempt RT updates from Thomas Gleixner:
 "Introduce preempt_[dis|enable_nested() and use it to clean up various
  places which have open coded PREEMPT_RT conditionals.

  On PREEMPT_RT enabled kernels, spinlocks and rwlocks are neither
  disabling preemption nor interrupts. Though there are a few places
  which depend on the implicit preemption/interrupt disable of those
  locks, e.g. seqcount write sections, per CPU statistics updates etc.

  PREEMPT_RT added open coded CONFIG_PREEMPT_RT conditionals to
  disable/enable preemption in the related code parts all over the
  place. That's hard to read and does not really explain why this is
  necessary.

  Linus suggested to use helper functions (preempt_disable_nested() and
  preempt_enable_nested()) and use those in the affected places. On !RT
  enabled kernels these functions are NOPs, but contain a lockdep assert
  to validate that preemption is actually disabled to catch call sites
  which do not have preemption disabled.

  Clean up the affected code paths in mm, dentry and lib"

* tag 'sched-rt-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  u64_stats: Streamline the implementation
  flex_proportions: Disable preemption entering the write section.
  mm/compaction: Get rid of RT ifdeffery
  mm/memcontrol: Replace the PREEMPT_RT conditionals
  mm/debug: Provide VM_WARN_ON_IRQS_ENABLED()
  mm/vmstat: Use preempt_[dis|en]able_nested()
  dentry: Use preempt_[dis|en]able_nested()
  preempt: Provide preempt_[dis|en]able_nested()

Pull objtool updates from Ingo Molnar:

 - Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really
   useful and only found a non-bug false positive so far.

 - Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86
   decoder. Because these instructions are rather ineffective, they
   never showed up in compiler output, but they are simple enough to
   support, so add them for completeness.

 - A bit more cross-arch preparatory work.

* tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Teach decode about LOOP* instructions
  objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
  objtool: Use arch_jump_destination() in read_intra_function_calls()

Pull locking updates from Ingo Molnar:

 - Disable preemption in rwsem_write_trylock()'s attempt to take the
   rwsem, to avoid RT tasks hogging the CPU, which managed to preempt
   this function after the owner has been cleared but before a new owner
   is set. Also add debug checks to enforce this.

 - Add __lockfunc to more slow path functions and add __sched to
   semaphore functions.

 - Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
   toggles are disabled, to reduce LTO text size.

 - Print more debug information when lockdep gets confused in
   look_up_lock_class().

 - Improve header file abuse checks.

 - Misc cleanups

* tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused
  locking: Add __sched to semaphore functions
  locking/rwsem: Disable preemption while trying for rwsem lock
  locking: Detect includes rwlock.h outside of spinlock.h
  locking: Add __lockfunc to slow path functions
  locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled
  selftests: futex: Fix 'the the' typo in comment

Merge additional generic power domains handling update and an
improvement of the PM callback definition macros for 6.1-rc1:

 - Add an error message to be printed when a power domain marked as
   "always on" is not actually on during initialization (Johan Hovold).

 - Extend macros used for defining power management callbacks to allow
   conditional exporting of noirq and late/early suspend/resume PM
   callbacks (Paul Cercueil).

* pm-domains:
  PM: domains: log failures to register always-on domains

* pm-core:
  PM: Improve EXPORT_*_DEV_PM_OPS macros

Pull perf events updates from Ingo Molnar:
 "PMU driver updates:

   - Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
     support for Zen 4 processors.

   - Extend the perf ABI to provide branch speculation information, if
     available, and use this on CPUs that have it (eg. LbrExtV2).

   - Improve Intel PEBS TSC timestamp handling & integration.

   - Add Intel Raptor Lake S CPU support.

   - Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
     by utilizing IBS tagged load/store samples.

   - Clean up & optimize various x86 PMU details.

  HW breakpoints:

   - Big rework to optimize the code for systems with hundreds of CPUs
     and thousands of breakpoints:

      - Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
        per-CPU rwsem that is read-locked during most of the key
        operations.

      - Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
        fetch_bp_busy_slots().

      - Apply micro-optimizations & cleanups.

  - Misc cleanups & enhancements"

* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
  perf: Fix pmu_filter_match()
  perf: Fix lockdep_assert_event_ctx()
  perf/x86/amd/lbr: Adjust LBR regardless of filtering
  perf/x86/utils: Fix uninitialized var in get_branch_type()
  perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
  perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
  perf/x86/amd: Support PERF_SAMPLE_ADDR
  perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
  perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
  perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
  perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
  perf/x86/uncore: Add new Raptor Lake S support
  perf/x86/cstate: Add new Raptor Lake S support
  perf/x86/msr: Add new Raptor Lake S support
  perf/x86: Add new Raptor Lake S support
  bpf: Check flags for branch stack in bpf_read_branch_records helper
  perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
  perf: Use sample_flags for raw_data
  perf: Use sample_flags for addr
  ...

Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:

 - Fix a memory leak in APEI by avoiding to add do not add task_work to
   kernel threads running when an asynchronous error is detected (Shuai
   Xue).

 - Add ACPI support for handling system wakeups via GPIO wake capable
   IRQs in addition to GPEs (Raul E Rangel).

 - Make the system reboot code put ACPI-enabled systems into the S5
   (system off) state which is necessary for some platforms to work as
   expected (Kai-Heng Feng).

 - Make the white space usage in the ACPI thermal driver more consistent
   and drop redundant code from it (Rafael Wysocki).

* acpi-apei:
  ACPI: APEI: do not add task_work to kernel thread to avoid memory leak

* acpi-wakeup:
  ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
  i2c: acpi: Use ACPI wake capability bit to set wake_irq
  ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
  gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get

* acpi-reboot:
  PM: ACPI: reboot: Reinstate S5 for reboot
  kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode

* acpi-thermal:
  ACPI: thermal: Drop some redundant code
  ACPI: thermal: Drop redundant parens from expressions
  ACPI: thermal: Use white space more consistently

Pull scheduler updates from Ingo Molnar:
 "Debuggability:

   - Change most occurances of BUG_ON() to WARN_ON_ONCE()

   - Reorganize & fix TASK_ state comparisons, turn it into a bitmap

   - Update/fix misc scheduler debugging facilities

  Load-balancing & regular scheduling:

   - Improve the behavior of the scheduler in presence of lot of
     SCHED_IDLE tasks - in particular they should not impact other
     scheduling classes.

   - Optimize task load tracking, cleanups & fixes

   - Clean up & simplify misc load-balancing code

  Freezer:

   - Rewrite the core freezer to behave better wrt thawing and be
     simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
     fixing/adjusting all the fallout.

  Deadline scheduler:

   - Fix the DL capacity-aware code

   - Factor out dl_task_is_earliest_deadline() &
     replenish_dl_new_period()

   - Relax/optimize locking in task_non_contending()

  Cleanups:

   - Factor out the update_current_exec_runtime() helper

   - Various cleanups, simplifications"

* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  sched: Fix more TASK_state comparisons
  sched: Fix TASK_state comparisons
  sched/fair: Move call to list_last_entry() in detach_tasks
  sched/fair: Cleanup loop_max and loop_break
  sched/fair: Make sure to try to detach at least one movable task
  sched: Show PF_flag holes
  freezer,sched: Rewrite core freezer logic
  sched: Widen TAKS_state literals
  sched/wait: Add wait_event_state()
  sched/completion: Add wait_for_completion_state()
  sched: Add TASK_ANY for wait_task_inactive()
  sched: Change wait_task_inactive()s match_state
  freezer,umh: Clean up freezer/initrd interaction
  freezer: Have {,un}lock_system_sleep() save/restore flags
  sched: Rename task_running() to task_on_cpu()
  sched/fair: Cleanup for SIS_PROP
  sched/fair: Default to false in test_idle_cores()
  sched/fair: Remove useless check in select_idle_core()
  sched/fair: Avoid double search on same cpu
  sched/fair: Remove redundant check in select_idle_smt()
  ...

Merge tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts update from Eric Biederman:
 "Split rlimit and ucount values and max values

  After the ucount rlimit code was merged a bunch of small but
  siginificant bugs were found and fixed. At the time it was realized
  that part of the problem was that while the ucount rlimits were very
  similar to the oridinary ucounts (in being nested counts with limits)
  the semantics were slightly different and the code would be less error
  prone if there was less sharing.

  This is the long awaited cleanup that should hopefully keep things
  more comprehensible and less error prone for whoever needs to touch
  that code next"

* tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Split rlimit and ucount values and max values

Merge tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace update from Eric Biederman:
 "ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT

  Recently I had a conversation where it was pointed out to me that
  SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
  difficult for a tracer to handle.

  Keeping SIGKILL working after the process has been killed is pain from
  an implementation point of view.

  So since the debuggers don't want this behavior let's see if we can
  remove this wart for the userspace API

  If a regression is detected it should only need to be the last change
  that is the reverted. The other two are just general cleanups that
  make the last patch simpler"

* tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Drop signals received after a fatal signal has been processed
  signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
  signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit

Merge tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull mqueue fix from Eric Biederman:
 "A fix for an unlikely but possible memory leak"

* tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc: mqueue: fix possible memory leak in init_mqueue_fs()

Merge tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull kthread update from Eric Biederman:
 "Break out of wait loops on kthread_stop()

  This is a small tweak to kthread_stop so it breaks out of
  interruptible waits, that don't explicitly test for kthread_stop.

  These interruptible waits occassionaly occur in kernel threads do to
  code sharing"

* tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: break out of wait loops on kthread_stop()

Pull powerpc updates from Michael Ellerman:

 - Remove our now never-true definitions for pgd_huge() and p4d_leaf().

 - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.

 - Add support for syscall wrappers.

 - Add support for KFENCE on 64-bit.

 - Update 64-bit HV KVM to use the new guest state entry/exit accounting
   API.

 - Support execute-only memory when using the Radix MMU (P9 or later).

 - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.

 - Updates to our linker script to move more data into read-only
   sections.

 - Allow the VDSO to be randomised on 32-bit.

 - Many other small features and fixes.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.

* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  KVM: PPC: Book3S HV: Fix stack frame regs marker
  powerpc: Don't add __powerpc_ prefix to syscall entry points
  powerpc/64s/interrupt: Fix stack frame regs marker
  powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
  powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
  powerpc/pseries: Add firmware details to the hardware description
  powerpc/powernv: Add opal details to the hardware description
  powerpc: Add device-tree model to the hardware description
  powerpc/64: Add logical PVR to the hardware description
  powerpc: Add PVR & CPU name to hardware description
  powerpc: Add hardware description string
  powerpc/configs: Enable PPC_UV in powernv_defconfig
  powerpc/configs: Update config files for removed/renamed symbols
  powerpc/mm: Fix UBSAN warning reported on hugetlb
  powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
  powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
  powerpc: Drops STABS_DEBUG from linker scripts
  powerpc/64s: Remove lost/old comment
  powerpc/64s: Remove old STAB comment
  powerpc: remove orphan systbl_chk.sh
  ...

Pull s390 updates from Vasily Gorbik:

 - Make use of the IBM z16 processor activity instrumentation facility
   extension to count neural network processor assist operations: add a
   new PMU device driver so that perf can make use of this.

 - Rework memcpy_real() to avoid DAT-off mode.

 - Rework absolute lowcore access code.

 - Various small fixes and improvements all over the code.

* tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: remove unused bus_next field from struct zpci_dev
  s390/cio: remove unused ccw_device_force_console() declaration
  s390/pai: Add support for PAI Extension 1 NNPA counters
  s390/mm: fix no previous prototype warnings in maccess.c
  s390/mm: uninline copy_oldmem_kernel() function
  s390/mm,ptdump: add real memory copy page markers
  s390/mm: rework memcpy_real() to avoid DAT-off mode
  s390/dump: save IPL CPU registers once DAT is available
  s390/pci: convert high_memory to physical address
  s390/smp,ptdump: add absolute lowcore markers
  s390/smp: rework absolute lowcore access
  s390/smp: call smp_reinit_ipl_cpu() before scheduler is available
  s390/ptdump: add missing amode31 markers
  s390/mm: split lowcore pages with set_memory_4k()
  s390/mm: remove unused access parameter from do_fault_error()
  s390/delay: sync comment within __delay() with reality
  s390: move from strlcpy with unused retval to strscpy

Pull RISC-V updates from Palmer Dabbelt:

 - Improvements to the CPU topology subsystem, which fix some issues
   where RISC-V would report bad topology information.

 - The default NR_CPUS has increased to XLEN, and the maximum
   configurable value is 512.

 - The CD-ROM filesystems have been enabled in the defconfig.

 - Support for THP_SWAP has been added for rv64 systems.

There are also a handful of cleanups and fixes throughout the tree.

* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: enable THP_SWAP for RV64
  RISC-V: Print SSTC in canonical order
  riscv: compat: s/failed/unsupported if compat mode isn't supported
  RISC-V: Increase range and default value of NR_CPUS
  cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
  perf: RISC-V: throttle perf events
  perf: RISC-V: exclude invalid pmu counters from SBI calls
  riscv: enable CD-ROM file systems in defconfig
  riscv: topology: fix default topology reporting
  arm64: topology: move store_cpu_topology() to shared code

Pull microblaze updates from Michal Simek:
 "This adds architecture support for error injection which can be done
  only via local memory (BRAM) with enabling path for recovery after
  reset.

  These patches targets Triple Modular Redundacy (TMR) configuration
  where 3 Microblazes are running in parallel with monitoring logic.

  When an error happens (or is injected) system goes to break handler
  with full CPU reset and system recovery back to origin context. More
  information can be found at [1]"

Link: https://www.xilinx.com/content/dam/xilinx/support/documents/ip_documentation/tmr/v1_0/pg268-tmr.pdf [1]

* tag 'microblaze-v6.1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add support for error injection
  microblaze: Add custom break vector handler for mb manager
  microblaze: Add xmb_manager_register function

Pull kvm updates from Paolo Bonzini:
 "The first batch of KVM patches, mostly covering x86.

  ARM:

   - Account stage2 page table allocations in memory stats

  x86:

   - Account EPT/NPT arm64 page table allocations in memory stats

   - Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
     accesses

   - Drop eVMCS controls filtering for KVM on Hyper-V, all known
     versions of Hyper-V now support eVMCS fields associated with
     features that are enumerated to the guest

   - Use KVM's sanitized VMCS config as the basis for the values of
     nested VMX capabilities MSRs

   - A myriad event/exception fixes and cleanups. Most notably, pending
     exceptions morph into VM-Exits earlier, as soon as the exception is
     queued, instead of waiting until the next vmentry. This fixed a
     longstanding issue where the exceptions would incorrecly become
     double-faults instead of triggering a vmexit; the common case of
     page-fault vmexits had a special workaround, but now it's fixed for
     good

   - A handful of fixes for memory leaks in error paths

   - Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow

   - Never write to memory from non-sleepable kvm_vcpu_check_block()

   - Selftests refinements and cleanups

   - Misc typo cleanups

  Generic:

   - remove KVM_REQ_UNHALT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
  KVM: remove KVM_REQ_UNHALT
  KVM: mips, x86: do not rely on KVM_REQ_UNHALT
  KVM: x86: never write to memory from kvm_vcpu_check_block()
  KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
  KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
  KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
  KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
  KVM: x86: lapic does not have to process INIT if it is blocked
  KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
  KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
  KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
  KVM: x86: make vendor code check for all nested events
  mailmap: Update Oliver's email address
  KVM: x86: Allow force_emulation_prefix to be written without a reload
  KVM: selftests: Add an x86-only test to verify nested exception queueing
  KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
  KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
  KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
  KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
  KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
  ...

Pull EFI updates from Ard Biesheuvel:
 "A bit more going on than usual in the EFI subsystem. The main driver
  for this has been the introduction of the LoonArch architecture last
  cycle, which inspired some cleanup and refactoring of the EFI code.
  Another driver for EFI changes this cycle and in the future is
  confidential compute.

  The LoongArch architecture does not use either struct bootparams or DT
  natively [yet], and so passing information between the EFI stub and
  the core kernel using either of those is undesirable. And in general,
  overloading DT has been a source of issues on arm64, so using DT for
  this on new architectures is a to avoid for the time being (even if we
  might converge on something DT based for non-x86 architectures in the
  future). For this reason, in addition to the patch that enables EFI
  boot for LoongArch, there are a number of refactoring patches applied
  on top of which separate the DT bits from the generic EFI stub bits.
  These changes are on a separate topich branch that has been shared
  with the LoongArch maintainers, who will include it in their pull
  request as well. This is not ideal, but the best way to manage the
  conflicts without stalling LoongArch for another cycle.

  Another development inspired by LoongArch is the newly added support
  for EFI based decompressors. Instead of adding yet another
  arch-specific incarnation of this pattern for LoongArch, we are
  introducing an EFI app based on the existing EFI libstub
  infrastructure that encapulates the decompression code we use on other
  architectures, but in a way that is fully generic. This has been
  developed and tested in collaboration with distro and systemd folks,
  who are eager to start using this for systemd-boot and also for arm64
  secure boot on Fedora. Note that the EFI zimage files this introduces
  can also be decompressed by non-EFI bootloaders if needed, as the
  image header describes the location of the payload inside the image,
  and the type of compression that was used. (Note that Fedora's arm64
  GRUB is buggy [0] so you'll need a recent version or switch to
  systemd-boot in order to use this.)

  Finally, we are adding TPM measurement of the kernel command line
  provided by EFI. There is an oversight in the TCG spec which results
  in a blind spot for command line arguments passed to loaded images,
  which means that either the loader or the stub needs to take the
  measurement. Given the combinatorial explosion I am anticipating when
  it comes to firmware/bootloader stacks and firmware based attestation
  protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
  when it comes to EFI measured boot, which is that the kernel measures
  the initrd and command line. Intermediate loaders can measure
  additional assets if needed, but with the baseline in place, we can
  deploy measured boot in a meaningful way even if you boot into Linux
  straight from the EFI firmware.

  Summary:

   - implement EFI boot support for LoongArch

   - implement generic EFI compressed boot support for arm64, RISC-V and
     LoongArch, none of which implement a decompressor today

   - measure the kernel command line into the TPM if measured boot is in
     effect

   - refactor the EFI stub code in order to isolate DT dependencies for
     architectures other than x86

   - avoid calling SetVirtualAddressMap() on arm64 if the configured
     size of the VA space guarantees that doing so is unnecessary

   - move some ARM specific code out of the generic EFI source files

   - unmap kernel code from the x86 mixed mode 1:1 page tables"

* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
  efi: zboot: create MemoryMapped() device path for the parent if needed
  efi: libstub: fix up the last remaining open coded boot service call
  efi/arm: libstub: move ARM specific code out of generic routines
  efi/libstub: measure EFI LoadOptions
  efi/libstub: refactor the initrd measuring functions
  efi/loongarch: libstub: remove dependency on flattened DT
  efi: libstub: install boot-time memory map as config table
  efi: libstub: remove DT dependency from generic stub
  efi: libstub: unify initrd loading between architectures
  efi: libstub: remove pointless goto kludge
  efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
  efi: libstub: avoid efi_get_memory_map() for allocating the virt map
  efi: libstub: drop pointless get_memory_map() call
  efi: libstub: fix type confusion for load_options_size
  arm64: efi: enable generic EFI compressed boot
  loongarch: efi: enable generic EFI compressed boot
  riscv: efi: enable generic EFI compressed boot
  efi/libstub: implement generic EFI zboot
  efi/libstub: move efi_system_table global var into separate object
  ...

Pull mailbox updates from Jassi Brar:

 - apple: implement poll and flush callbacks

 - qcom: fix clocks for IPQ6018 and IPQ8074 irq handler as not-a-thread

 - microchip: split reg-space into two

 - imx: RST channel fix

 - bcm: fix dma_map_sg error handling

 - misc: spelling fix in pcc driver

* tag 'mailbox-v6.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom-ipcc: flag IRQ NO_THREAD
  mailbox: pcc: Fix spelling mistake "Plaform" -> "Platform"
  mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
  mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support
  dt-bindings: mailbox: qcom: correct clocks for IPQ6018 and IPQ8074
  dt-bindings: mailbox: qcom: set correct #clock-cells
  mailbox: mpfs: account for mbox offsets while sending
  mailbox: mpfs: fix handling of the reg property
  dt-bindings: mailbox: fix the mpfs' reg property
  mailbox: imx: fix RST channel support
  mailbox: apple: Implement poll_data() operation
  mailbox: apple: Implement flush() operation

Pull clk updates from Stephen Boyd:
 "We have some late breaking reports that a patch series to rework clk
  rate range support broke boot on some devices, so I've left that
  branch out of this. Hopefully we can get to that next week, or punt on
  it and let it bake another cycle. That means we don't really have any
  changes to the core framework this time around besides a few typo
  fixes. Instead this is all clk driver updates and fixes.

  The usual suspects are here (again), with Qualcomm dominating the
  diffstat. We look to have gained support for quite a few new Qualcomm
  SoCs and Dmitry worked on updating many of the existing Qualcomm
  drivers to use clk_parent_data. After that we have MediaTek drivers
  getting some much needed updates, in particular to support GPU DVFS.
  There are also quite a few Samsung clk driver patches, but that's
  mostly because there was a maintainer change and so last release we
  missed some of those patches.

  Overall things look normal, but I'm slowly reviewing core framework
  code nowadays and that shows given the rate range patches had to be
  yanked last minute. Let's hope this situation changes soon.

  New Drivers:
   - Support for Renesas VersaClock7 clock generator family
   - Add Spreadtrum UMS512 SoC clk support
   - New clock drivers for MediaTek Helio X10 MT6795
   - Display clks for Qualcomm SM6115, SM8450
   - GPU clks for Qualcomm SC8280XP
   - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

  Deleted Drivers:
   - Remove DaVinci DM644x and DM646x clk driver support

  Updates:
   - Convert Baikal-T1 CCU driver to platform driver
   - Split reset support out of primary Baikal-T1 CCU driver
   - Add some missing clks required for RPiVid Video Decoder on
     RaspberryPi
   - Mark PLLC critical on bcm2835
   - More devm helpers for fixed rate registration
   - Various PXA168 clk driver fixes
   - Add resets for MediaTek MT8195 PCIe and USB
   - Miscellaneous of_node_put() fixes
   - Nuke dt-bindings/clk path (again) by moving headers to
     dt-bindings/clock
   - Convert gpio-clk-gate binding to YAML
   - Various fixes to AMD/Xilinx Zynqmp clk driver
   - Graduate AMD/Xilinx "clocking wizard" driver from staging
   - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
   - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
   - Fix GPU clock topology on MT8195
   - Propogate rate changes from GPU clock gate up the tree
   - Clock mux notifiers for GPU-related PLLs
   - Conversion of more "simple" drivers to mtk_clk_simple_probe()
   - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
   - Fixes to previous |struct clk| to |struct clk_hw| conversion on
     MediaTek
   - Shrink MT8192 clock driver by deduplicating clock parent lists
   - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
     clocks for i.MX8MP
   - Drop unnecessary newline in i.MX8MM dt-bindings
   - Add more MU1 and SAI clocks dt-bindings Ids
   - Introduce slice busy bit check for i.MX93 composite clock
   - Introduce white list bit check for i.MX93 composite clock
   - Add new i.MX93 clock gate
   - Add MU1 and MU2 clocks to i.MX93 clock provider
   - Add SAI IPG clocks to i.MX93 clock provider
   - add generic clocks for U(S)ART available on SAMA5D2 SoCs
   - reset controller support for Polarfire clocks
   - .round_rate and .set rate support for clk-mpfs
   - code cleanup for clk-mpfs
   - PLL support for PolarFire SoC's Clock Conditioning Circuitry
   - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
     V4H
   - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
   - Add I2C clocks and resets on RZ/V2M
   - Document clock support for the RZ/Five SoC
   - mux-variant clock using the table variant to select parents
   - clock controller for the rv1126 soc
   - conversion of rk3128 to yaml and relicensing of the yaml bindings
     to gpl2+MIT (following dt-binding guildelines)
   - Exynos7885: add FSYS, TREX and MFC clock controllers
   - Exynos850: add IS and AUD (audio) clock controllers with bindings
   - ExynosAutov9: add FSYS clock controllers with bindings
   - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
     controllers, due to duplicated entries. This is an acceptable ABI
     break: recently developed/added platform so without legacies, acked
     by known users/developers
   - ExynosAutov9: add few missing Peric 0/1 gates
   - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
   - Minor code improvements (use of_device_get_match_data() helper,
     code style)
   - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
     he already maintainers that architecture/platform
   - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
     retention issues during suspend of USB on Qualcomm sc7180/sc7280
     and SC8280XP
   - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
   - Qualcomm SDM660 SDCC1 moved to floor clk ops
   - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
     was added/fixed
   - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
   - Support for Qualcomm SDM670 GCC and RPMh clks was added
   - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
     num_parents was done for many Qualcomm SoCs
   - Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: ast2600: BCLK comes from EPLL
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: nxp: fix typo in comment
  clk: pxa: add a check for the return value of kzalloc()
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  ...