- 30 Jun, 2015 18 commits
-
-
Steve Cornelius authored
commit 6fd4b156 upstream. Multiple function in asynchronous hashing use a saved-state block, a.k.a. struct caam_hash_state, which holds a stash of information between requests (init/update/final). Certain values in this state block are loaded for processing using an inline-if, and when this is done, the potential for uninitialized data can pose conflicts. Therefore, this patch improves initialization of state data to prevent false assignments using uninitialized data in the state block. This patch addresses the following traceback, originating in ahash_final_ctx(), although a problem like this could certainly exhibit other symptoms: kernel BUG at arch/arm/mm/dma-mapping.c:465! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01752-gdd441b9-dirty #40) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<80043240>] lr : [<8004323c>] psr: 60000013 sp : e423fd98 ip : 60000013 fp : 0000001c r10: e4191b84 r9 : 00000020 r8 : 00000009 r7 : 88005038 r6 : 00000001 r5 : 2d676572 r4 : e4191a60 r3 : 00000000 r2 : 00000001 r1 : 60000093 r0 : 00000033 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process cryptomgr_test (pid: 1306, stack limit = 0xe423e2f0) Stack: (0xe423fd98 to 0xe4240000) fd80: 11807fd1 80048544 fda0: 88005000 e4191a00 e5178040 8039dda0 00000000 00000014 2d676572 e4191008 fdc0: 88005018 e4191a60 00100100 e4191a00 00000000 8039ce0c e423fea8 00000007 fde0: e4191a00 e4227000 e5178000 8039ce18 e419183c 80203808 80a94a44 00000006 fe00: 00000000 80207180 00000000 00000006 e423ff08 00000000 00000007 e5178000 fe20: e41918a4 80a949b4 8c4844e2 00000000 00000049 74227000 8c4844e2 00000e90 fe40: 0000000e 74227e90 ffff8c58 80ac29e0 e423fed4 8006a350 8c81625c e423ff5c fe60: 00008576 e4002500 00000003 00030010 e4002500 00000003 e5180000 e4002500 fe80: e5178000 800e6d24 007fffff 00000000 00000010 e4001280 e4002500 60000013 fea0: 000000d0 804df078 00000000 00000000 00000000 00000000 00000000 00000000 fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 e4227000 e4226000 e4753000 e4752000 e40a5000 e40a4000 ff00: e41e7000 e41e6000 00000000 00000000 00000000 e423ff14 e423ff14 00000000 ff20: 00000400 804f9080 e5178000 e4db0b40 00000000 e4db0b80 0000047c 00000400 ff40: 00000000 8020758c 00000400 ffffffff 0000008a 00000000 e4db0b40 80206e00 ff60: e4049dbc 00000000 00000000 00000003 e423ffa4 80062978 e41a8bfc 00000000 ff80: 00000000 e4049db4 00000013 e4049db0 00000013 00000000 00000000 00000000 ffa0: e4db0b40 e4db0b40 80204cbc 00000013 00000000 00000000 00000000 80204cfc ffc0: e4049da0 80089544 80040a40 00000000 e4db0b40 00000000 00000000 00000000 ffe0: e423ffe0 e423ffe0 e4049da0 800894c4 80040a40 80040a40 00000000 00000000 [<80043240>] (__bug+0x1c/0x28) from [<80048544>] (___dma_single_dev_to_cpu+0x84) [<80048544>] (___dma_single_dev_to_cpu+0x84/0x94) from [<8039dda0>] (ahash_fina) [<8039dda0>] (ahash_final_ctx+0x180/0x428) from [<8039ce18>] (ahash_final+0xc/0) [<8039ce18>] (ahash_final+0xc/0x10) from [<80203808>] (crypto_ahash_op+0x28/0xc) [<80203808>] (crypto_ahash_op+0x28/0xc0) from [<80207180>] (test_hash+0x214/0x5) [<80207180>] (test_hash+0x214/0x5b8) from [<8020758c>] (alg_test_hash+0x68/0x8c) [<8020758c>] (alg_test_hash+0x68/0x8c) from [<80206e00>] (alg_test+0x7c/0x1b8) [<80206e00>] (alg_test+0x7c/0x1b8) from [<80204cfc>] (cryptomgr_test+0x40/0x48) [<80204cfc>] (cryptomgr_test+0x40/0x48) from [<80089544>] (kthread+0x80/0x88) [<80089544>] (kthread+0x80/0x88) from [<80040a40>] (kernel_thread_exit+0x0/0x8) Code: e59f0010 e1a01003 eb126a8d e3a03000 (e5833000) ---[ end trace d52a403a1d1eaa86 ]--- Signed-off-by:
Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by:
Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Horia Geanta authored
commit de0e35ec upstream. state->buf_dma not being initialized can cause try_buf_map_to_sec4_sg to try to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000002eb15068] [size=0 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1387 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: eed24e90 ti: eebd0000 task.ti: eebd0000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: eebd1a50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44042082 XER: 00000000 GPR00: c02889fc eebd1b00 eed24e90 0000008d c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 24042082 00000000 c07a1900 eeda2a40 GPR16: 005d62a0 c078ad4c 00000000 eeb15068 c07e1e10 c0da1180 00029002 c0d97408 GPR24: c62497a0 00000014 eebd1b58 00000000 c078ad4c ee130210 00000000 2eb15068 NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [eebd1b00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) --- Exception: 0 at (null) LR = (null) [eebd1b50] [c0288c78] debug_dma_unmap_page+0x78/0x90 (unreliable) [eebd1bd0] [f956f738] ahash_final_ctx+0x6d8/0x7b0 [caamhash] [eebd1c30] [c022ff4c] __test_hash+0x2ac/0x6c0 [eebd1de0] [c0230388] test_hash+0x28/0xb0 [eebd1e00] [c02304a4] alg_test_hash+0x94/0xc0 [eebd1e20] [c022fa94] alg_test+0x114/0x2e0 [eebd1ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [eebd1eb0] [c00497a4] kthread+0xc4/0xe0 [eebd1f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Acked-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Adam Jackson authored
commit 25161084 upstream. Turns out 1366x768 does not in fact work on this hardware. Signed-off-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Hui Wang authored
commit 6ab42ff4 upstream. On a HP Envy TouchSmart laptop, there are 2 speakers (main speaker and subwoofer speaker), 1 headphone and 2 DACs, without this fixup, the headphone will be assigned to a DAC and the 2 speakers will be assigned to another DAC, this assignment makes the surround-2.1 channels invalid. To fix it, here using a DAC/pin preference map to bind the main speaker to 1 DAC and the subwoofer speaker will be assigned to another DAC. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sagi Grimberg authored
commit 2f1b6b7d upstream. When receiving a new iser connect request we serialize the pending requests by adding the newly created iser connection to the np accept list and let the login thread process the connect request one by one (np_accept_wait). In case we received a disconnect request before the iser_conn has begun processing (still linked in np_accept_list) we should detach it from the list and clean it up and not have the login thread process a stale connection. We do it only when the connection state is not already terminating (initiator driven disconnect) as this might lead us to access np_accept_mutex after the np was released in live shutdown scenarios. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Jenny Falkovich <jennyf@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [ luis: backported to 3.16: - use 'conn_accept_node' instead of 'accept_node' (field renamed by dac6ab30 "iser-target: Remove conn_ prefix from struct isert_conn members") - adjusted context ] Signed-off-by:
-
Sagi Grimberg authored
commit 9253e667 upstream. Since commit "2426bd45 target: Report correct response ..." we might get a command with data_size that does not fit to the number of allocated data sg elements. Given that we rely on cmd t_data_nents which might be different than the data_size, we sometimes receive local length error completion. The correct approach would be to take the command data_size into account when constructing the ib sg_list. Signed-off-by:
-
Dan Williams authored
commit 4d66e5e9 upstream. ================================= [ INFO: inconsistent lock state ] 4.1.0-rc7+ #217 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context [..] [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70 [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq [<ffffffff8143bfec>] part_release+0x1c/0x50 [<ffffffff8158edf6>] device_release+0x36/0xb0 [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8145aad0>] kobject_put+0x30/0x70 [<ffffffff8158f147>] put_device+0x17/0x20 [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180 [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0 [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90 [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90 [<ffffffff81067e2e>] __do_softirq+0xde/0x600 Neil sees this in his tests and it also triggers on pmem driver unbind for the libnvdimm tests. This fix is on top of an initial fix by Keith for incorrect usage of mutex_lock() in this path: 2da78092 "block: Fix dev_t minor allocation lifetime". Both this and 2da78092 are candidates for -stable. Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime") Cc: Keith Busch <keith.busch@intel.com> Reported-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Wang Long authored
commit 10802932 upstream. The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.comSigned-off-by:
Wang Long <long.wanglong@huawei.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Gu Zheng authored
commit 85bd8399 upstream. Izumi found the following oops when hot re-adding a node: BUG: unable to handle kernel paging request at ffffc90008963690 IP: __wake_up_bit+0x20/0x70 Oops: 0000 [#1] SMP CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80 Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015 task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000 RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP: 0018:ffff880017b97be8 EFLAGS: 00010246 RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9 RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648 RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800 R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000 FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0 Call Trace: unlock_page+0x6d/0x70 generic_write_end+0x53/0xb0 xfs_vm_write_end+0x29/0x80 [xfs] generic_perform_write+0x10a/0x1e0 xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs] xfs_file_write_iter+0x79/0x120 [xfs] __vfs_write+0xd4/0x110 vfs_write+0xac/0x1c0 SyS_write+0x58/0xd0 system_call_fastpath+0x12/0x76 Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48 RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP <ffff880017b97be8> CR2: ffffc90008963690 Reproduce method (re-add a node):: Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic) This seems an use-after-free problem, and the root cause is zone->wait_table was not set to *NULL* after free it in try_offline_node. When hot re-add a node, we will reuse the pgdat of it, so does the zone struct, and when add pages to the target zone, it will init the zone first (including the wait_table) if the zone is not initialized. The judgement of zone initialized is based on zone->wait_table: static inline bool zone_is_initialized(struct zone *zone) { return !!zone->wait_table; } so if we do not set the zone->wait_table to *NULL* after free it, the memory hotplug routine will skip the init of new zone when hot re-add the node, and the wait_table still points to the freed memory, then we will access the invalid address when trying to wake up the waiting people after the i/o operation with the page is done, such as mentioned above. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Berg authored
commit 9c5a18a3 upstream. Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691Reported-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by:
Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jani Nikula authored
commit 3f5f1554 upstream. Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI devices, as they do not have a sink device in them to respond to any AUX traffic. When probing these dongles over the DDC, sometimes they will NAK the first attempt even though the transaction is valid and they support the DDC protocol. The retry loop inside of drm_do_probe_ddc_edid() would normally catch this case and try the transaction again, resulting in success. That, however, was thwarted by the fix for [1]: commit 9292f37e Author: Eugeni Dodonov <eugeni.dodonov@intel.com> Date: Thu Jan 5 09:34:28 2012 -0200 drm: give up on edid retries when i2c bus is not responding This added code to exit immediately if the return code from the i2c_transfer function was -ENXIO in order to reduce the amount of time spent in waiting for unresponsive or disconnected devices. That was possible because the underlying i2c bit banging algorithm had retries of its own (which, of course, were part of the reason for the bug the commit fixes). Since its introduction in commit f899fc64 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links we've been flipping back and forth enabling the GMBUS transfers, but we've settled since then. The GMBUS implementation does not do any retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop on first encounter of -ENXIO. This, combined with Eugeni's commit, broke the retry on -ENXIO. Retry GMBUS once on -ENXIO on first message to mitigate the issues with passive adapters. This patch is based on the work, and commit message, by Todd Previte <tprevite@gmail.com>. [1] https://bugs.freedesktop.org/show_bug.cgi?id=41059 v2: Don't retry if using bit banging. v3: Move retry within gmbux_xfer, retry only on first message. v4: Initialize GMBUS0 on retry (Ville). v5: Take index reads into account (Ville). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924 Cc: Todd Previte <tprevite@gmail.com> Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2) Tested-by:
Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Peter Hutterer authored
commit 7f2ca8b5 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Aaro Koskinen authored
commit 4710f2fa upstream. MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the build. Fix that. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Axel Lin authored
commit febe0696 upstream. Fixes: 6058bb36 'ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller' Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Carlo Caione <carlo@caione.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1433684009.9134.1.camel@ingics.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jiang Liu authored
commit 210d150e upstream. The cpumask vp_dev->msix_affinity_masks[info->msix_vector] may contain staled information when vp_set_vq_affinity() gets called, so clear it before setting the new cpu bit mask. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> [ luis: backported to 3.16: - file rename: virtio_pci_common.c -> virtio_pci.c ] Signed-off-by:
-
Nadav Haklai authored
commit e96998fc upstream. According to the Armada 38x datasheet, the window base address registers value is set in bits [31:4] of the register and corresponds to the transaction address bits [47:20]. Therefore, the 32bit base address value should be shifted right by 20bits and left by 4bits, resulting in 16 bit shift right. The bug as not been noticed yet because if the memory available on the platform is less than 2GB, then the base address is zero. [gregory.clement@free-electrons.com: add extra-explanation] Fixes: a3464ed2 (ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces) Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Reviewed-by:
Omri Itach <omrii@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
David Woodhouse authored
commit 4ed6a540 upstream. When we use 'intel_iommu=igfx_off' to disable translation for the graphics, and when we discover that the BIOS has misconfigured the DMAR setup for I/OAT, we use a special DUMMY_DEVICE_DOMAIN_INFO value in dev->archdata.iommu to indicate that translation is disabled. With passthrough mode, we were attempting to dereference that as a normal pointer to a struct device_domain_info when setting up an identity mapping for the affected device. This fixes the problem by making device_to_iommu() explicitly check for the special value and indicate that no IOMMU was found to handle the devices in question. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
David Woodhouse authored
commit 18436afd upstream. Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains") prevents certain options for devices with RMRRs. This even prevents those devices from getting a 1:1 mapping with 'iommu=pt', because we don't have the code to handle *preserving* the RMRR regions when moving the device between domains. There's already an exclusion for USB devices, because we know the only reason for RMRRs there is a misguided desire to keep legacy keyboard/mouse emulation running in some theoretical OS which doesn't have support for USB in its own right... but which *does* enable the IOMMU. Add an exclusion for graphics devices too, so that 'iommu=pt' works there. We should be able to successfully assign graphics devices to guests too, as long as the initial handling of stolen memory is reconfigured appropriately. This has certainly worked in the past. Signed-off-by:
-
- 17 Jun, 2015 4 commits
-
-
Jeff Mahoney authored
commit 727b9784 upstream. Orphans in the fs tree are cleaned up via open_ctree and subvolume orphans are cleaned via btrfs_lookup_dentry -- except when a default subvolume is in use. The name for the default subvolume uses a manual lookup that doesn't trigger orphan cleanup and needs to trigger it manually as well. This doesn't apply to the remount case since the subvolumes are cleaned up by walking the root radix tree. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chengyu Song authored
commit 26e726af upstream. fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was the last extent that will fit in user array. If 1 is returned, the return value may eventually returned to user space, which should not happen, according to manpage of ioctl. Signed-off-by:
Chengyu Song <csong84@gatech.edu> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Filipe Manana authored
commit 2f1f465a upstream. If the clone root was not readonly or the dead flag was set on it, we were leaving without decrementing the root's send_progress counter (and before we just incremented it). If a concurrent snapshot deletion was in progress and ended up being aborted, it would be impossible to later attempt to delete again the snapshot, since the root's send_in_progress counter could never go back to 0. We were also setting clone_sources_to_rollback to i + 1 too early - if we bailed out because the clone root we got is not readonly or flagged as dead we ended up later derreferencing a null pointer because we didn't assign the clone root to sctx->clone_roots[i].root: for (i = 0; sctx && i < clone_sources_to_rollback; i++) btrfs_root_dec_send_in_progress( sctx->clone_roots[i].root); So just don't increment the send_in_progress counter if the root is readonly or flagged as dead. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
commit 5cc2b17e upstream. After we locked the root's root item, a concurrent snapshot deletion call might have set the dead flag on it. So check if the dead flag is set and abort if it is, just like we do for the parent root. Signed-off-by:
-
- 16 Jun, 2015 1 commit
-
-
Lukas Wunner authored
commit 6f317cfe upstream. Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Tested-by:
-
- 12 Jun, 2015 15 commits
-
-
Nikolay Aleksandrov authored
commit c4c832f8 upstream. br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to disable softirqs because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. The spin locks in br_fdb_update were _bh before commit f8ae737d ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398 ("bridge: add NTF_USE support") Using local_bh_disable/enable around br_fdb_update() allows us to keep using the spin_lock/unlock in br_fdb_update for the fast-path. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398 ("bridge: add NTF_USE support") Signed-off-by:
-
Shawn Bohrer authored
commit 6e540309 upstream. 421b3885 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by:
Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by:
-
Ian Campbell authored
commit 31a41898 upstream. When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Eric Dumazet authored
commit beb39db5 upstream. We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Ross Lagerwall authored
commit ce0e5c52 upstream. Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
-
Mark Salyzyn authored
commit b48732e4 upstream. got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
commit a935865c upstream. Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
commit 397a253a upstream. Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Florian Fainelli authored
commit 7e140696 upstream. RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
commit d66bf7dd upstream. The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Andrew Morton authored
commit 5ec45a19 upstream. Fix this compile issue with gcc-4.4.4: arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7d ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Nicholas Mc Guire authored
commit ed9244e6 upstream. Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Tested-by:
Ralf Baechle <ralf@linux-mips.org> [ luis: backported to 3.16: - file rename: emulate.c -> kvm_mips_emul.c ] Signed-off-by:
-
Jean Delvare authored
Commit 178c2490 ("thermal: step_wise: cdev only needs update on a new target state") broke driver acerhdf. That driver abused the step_wise thermal governor until the bang_bang governor was available, and the optimization broke this usage model. Kernels v3.12 to v3.18 are affected. In v3.19 the acerhdf driver was switched to the bang_bang governor and that solved the problem. For kernels v3.12 to v3.17, the bang_bang governor isn't available yet so the easiest fix is to revert the optimization. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by: Dieter Jurzitza (https://bugzilla.opensuse.org/show_bug.cgi?id=925961) Tested-by:
Peter Feuerer <peter@piie.net> Tested-by: Dieter Jurzitza Signed-off-by:
-
Tim Gardner authored
commit 7cbc0ea7 upstream. In file included from scripts/sortextable.c:194:0: scripts/sortextable.c: In function `main': scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ In file included from scripts/sortextable.c:192:0: scripts/sortextable.h:176:3: warning: `relocs_size' may be used uninitialized in this function [-Wmaybe-uninitialized] memset(relocs, 0, relocs_size); ^ scripts/sortextable.h:106:6: note: `relocs_size' was declared here int relocs_size; ^ gcc 4.9.1 Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Reviewed-by:
Jamie Iles <jamie.iles@oracle.com> Signed-off-by:
-
Peter Kümmel authored
commit 2d560306 upstream. Warning: In file included from scripts/kconfig/zconf.tab.c:2537:0: scripts/kconfig/menu.c: In function ‘get_symbol_str’: scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized] jump->offset = strlen(r->s); Simplifies the test logic because (head && local) means (jump != 0) and makes GCC happy when checking if the jump pointer was initialized. Signed-off-by:
Peter Kümmel <syntheticpp@gmx.net> Signed-off-by:
Michal Marek <mmarek@suse.cz> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
- 11 Jun, 2015 2 commits
-
-
Li RongQing authored
commit bdddbf69 upstream. The returned xfrm_state should be hold before unlock xfrm_state_lock, otherwise the returned xfrm_state maybe be released. Fixes: c454997e[{pktgen, xfrm} Introduce xfrm_state_lookup_byspi..] Cc: Fan Du <fan.du@intel.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Fan Du <fan.du@intel.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
James Hogan authored
commit 5f35b9cd upstream. Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by:
-
