- 16 Sep, 2014 24 commits
-
-
Adam Radford authored
The following patch for megaraid_sas fixes the LD/VF affiliation policy parsing code to account for LD targetId's and Hidden LD's (not yet affiliated with any Virtual Functions). This also breaks megasas_get_ld_vf_affiliation() into 2 separate functions: megasas_get_ld_vf_affiliation_111() and megasas_get_ld_Vf_affiliation_12() to reduce indentation levels. Signed-off-by:
Adam Radford <aradford@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Douglas Gilbert authored
Since a lot of functionality from SPC-4 is supported by this driver (e.g. LBP and PI) then bump the default INQUIRY version from SPC-3 to SPC-4. Also update the INQUIRY version descriptors. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Douglas Gilbert authored
Give existing errors priority over the generation of Task Set Full (TSF) errors. So that max_queue is not exceeded, existing errors may be sent back in the invocation thread. This is done so errors like Unit Attentions are not hidden and lost by either max_queue exceeded or real/injected TSFs. Signed-off-by:
-
Douglas Gilbert authored
This patch removes a NULL check for the scsi_cmnd::cmnd pointer since many other instances in this driver and elsewhere assume it is valid. Also redundant casts to 'unsigned char *' are removed as the pointer has that type. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc excess parameter warning: Warning(..//drivers/message/fusion/mptbase.c:1411): Excess function parameter 'prod_name' description in 'mpt_get_product_name' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Tomas Henzl authored
When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Suresh Thiagarajan authored
Instead of using the virt_ptr use request buffer for copying back the nvmd response data and use the same in request function also Signed-off-by:
Suresh Thiagarajan <suresh.thiagarajan@pmcs.com> Reviewed-by:
-
Jayamohan Kallickal authored
Bump the driver version Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
Driver should process the completion queue entries before a connection resources are freed. While running mixed traffic due to latency, driver processes the CQE after the connection resources are freed. This fix processes all the completion queue before the connection resources are freed. Signed-off-by:
-
Jayamohan Kallickal authored
During port async event driver should check if there is any boot target configured on the adapter. Update sysfs enteries with the boot target parameters. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
Change the copyright year to 2014 Signed-off-by:
-
Jayamohan Kallickal authored
commit 73af08e1 Author: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Date: Mon May 5 21:41:26 2014 -0400 be2iscsi: Fix interrupt Coalescing mechanism. Signed-off-by:
-
Hans Wennborg authored
The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by:
Hans Wennborg <hans@hanshq.net> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Chad Dupuis authored
Limiting which port update events will allow the driver to kick off a name server scan has been problematic in some corner cases so remove the restriction and restore the previous semantic. Also move the link up/down informational messages to the LOOP_UP and LOOP_DOWN events. Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Move the mailbox failure messages to a default debugging level so that benign failures won't flood the system logs but will still show up if default debug messaging is enabled (ql2xextended_error_logging=1). Signed-off-by:
-
Rasmus Villemoes authored
Rounding up to a multiple of 4 should be done using the ALIGN macro. As a bonus, this also makes the generated code smaller. In GetIocFacts(), sz is assigned to a few lines below without being read in the meantime, so it is ok that it doesn't end up with the same value as facts->FWImageSize. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Log message code 0x00c6 preserved, although it is reported after successful call to pci_enable_msix_range(), not before possibly unsuccessful call to pci_enable_msix(). Consumers of the error code should not notice the difference. Signed-off-by:
Alexander Gordeev <agordeev@redhat.com> Acked-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
Kashyap Desai <Kashyap.desai@avagotech.com> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Cc: linux-scsi@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by:
-
Alexander Gordeev authored
Currently the driver fails to analize MSI-X re-enablement status on resuming and always assumes the success. This update checks the MSI-X initialization result and fails to resume if MSI-Xs re-enablement failed. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
Currently the driver falls back to INTx mode when MSI-X initialization failed. This is a suboptimal behaviour for chips that also support MSI. This update changes that behaviour and falls back to MSI mode in case MSI-X mode initialization failed. Signed-off-by:
-
Christoph Hellwig authored
port_detect is only called from the module_init routine and thus implicitly serialized, so remove the driver lock which was held over potentially sleeping function calls. Signed-off-by:
Arthur Marsh <arthur.marsh@internode.on.net> Tested-by:
-
- 15 Sep, 2014 13 commits
-
-
Subhash Jadavani authored
SCSI Well-known logical units generally don't have any scsi driver associated with it which means no one will call scsi_autopm_put_device() on these wlun scsi devices and this would result in keeping the corresponding scsi device always active (hence LLD can't be suspended as well). Same exact problem can be seen for other scsi device representing normal logical unit whose driver is yet to be loaded. This patch fixes the above problem with this approach: - make the scsi_autopm_put_device call at the end of scsi_sysfs_add_sdev to make it balance out the get earlier in the function. - let drivers do paired get/put calls in their probe methods. Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Dolev Raviv <draviv@codeaurora.org> Signed-off-by:
-
Alan Stern authored
The SCSI specification requires that the second Command Data Byte should contain the LUN value in its high-order bits if the recipient device reports SCSI level 2 or below. Nevertheless, some USB mass-storage devices use those bits for other purposes in vendor-specific commands. Currently Linux has no way to send such commands, because the SCSI stack always overwrites the LUN bits. Testing shows that Windows 7 and XP do not store the LUN bits in the CDB when sending commands to a USB device. This doesn't matter if the device uses the Bulk-Only or UAS transports (which virtually all modern USB mass-storage devices do), as these have a separate mechanism for sending the LUN value. Therefore this patch introduces a flag in the Scsi_Host structure to inform the SCSI midlayer that a transport does not require the LUN bits to be stored in the CDB, and it makes usb-storage set this flag for all devices using the Bulk-Only transport. (UAS is handled by a separate driver, but it doesn't really matter because no SCSI-2 or lower device is at all likely to use UAS.) The patch also cleans up the code responsible for storing the LUN value by adding a bitflag to the scsi_device structure. The test for whether to stick the LUN value in the CDB can be made when the device is probed, and stored for future use rather than being made over and over in the fast path. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Tiziano Bacocco <tiziano.bacocco@gmail.com> Acked-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Kashyap.Desai@avagotech.com authored
Add a use_cmd_list flag in struct Scsi_Host to request keeping track of all outstanding commands per device. Default behaviour is not to keep track of cmd_list per sdev, as this may introduce lock contention. (overhead is more on multi-node NUMA.), and only enable it on the two drivers that need it. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Sujit Reddy Thumma authored
The SYNCHRONIZE_CACHE command is a medium write command and hence can fail when the device is write protected. Avoid sending such commands by making sure that write-cache-enable is disabled even though the device claim to support it. Signed-off-by:
Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by:
Venkatesh Srinivas <venkateshs@google.com> Signed-off-by:
-
Randy Dunlap authored
Convert spaces to tabs in kernel-doc notation. Correct duplicated (copy-paste) kernel-doc comments that are incorrect. Fix kernel-doc warning: Warning(..//drivers/scsi/scsi_error.c:1647): No description found for parameter 'shost' Signed-off-by:
-
Christoph Hellwig authored
Please try the fix below, looks like the commit broke TCQ for all drivers using block-level tagging. Signed-off-by: -
Mike Christie authored
This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu. This function is used by iscsi drivers and userspace to send iscsi PDUs/ commands. For login commands, we have a set buffer size. For all other commands we do not support data buffers. This was reported by Dan Carpenter here: http://www.spinics.net/lists/linux-scsi/msg66838.htmlReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Tony Luck authored
Cut & paste typo from the line above. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 9226b5b4 ("vfs: avoid non-forwarding large load after small store in path lookup") made link_path_walk() always access the "hash_len" field as a single 64-bit entity, in order to avoid mixed size accesses to the members. However, what I didn't notice was that that effectively means that the whole "struct qstr this" is now basically redundant. We already explicitly track the "const char *name", and if we just use "u64 hash_len" instead of "long len", there is nothing else left of the "struct qstr". We do end up wanting the "struct qstr" if we have a filesystem with a "d_hash()" function, but that's a rare case, and we might as well then just squirrell away the name and hash_len at that point. End result: fewer live variables in the loop, a smaller stack frame, and better code generation. And we don't need to pass in pointers variables to helper functions any more, because the return value contains all the relevant information. So this removes more lines than it adds, and the source code is clearer too. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the newly added drbg generator so that it actually works on 32-bit machines. Previously the code was only tested on 64-bit and on 32-bit it overflowed and simply doesn't work" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - remove check for uninitialized DRBG handle crypto: drbg - backport "fix maximum value checks on 32 bit systems"
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "double iput() on failure exit in lustre, racy removal of spliced dentries from ->s_anon in __d_materialise_dentry() plus a bunch of assorted RCU pathwalk fixes" The RCU pathwalk fixes end up fixing a couple of cases where we incorrectly dropped out of RCU walking, due to incorrect initialization and testing of the sequence locks in some corner cases. Since dropping out of RCU walk mode forces the slow locked accesses, those corner cases slowed down quite dramatically. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: be careful with nd->inode in path_init() and follow_dotdot_rcu() don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu() fix bogus read_seqretry() checks introduced in b37199e6 move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon) [fix] lustre: d_make_root() does iput() on dentry allocation failure
-
Linus Torvalds authored
The performance regression that Josef Bacik reported in the pathname lookup (see commit 99d263d4 "vfs: fix bad hashing of dentries") made me look at performance stability of the dcache code, just to verify that the problem was actually fixed. That turned up a few other problems in this area. There are a few cases where we exit RCU lookup mode and go to the slow serializing case when we shouldn't, Al has fixed those and they'll come in with the next VFS pull. But my performance verification also shows that link_path_walk() turns out to have a very unfortunate 32-bit store of the length and hash of the name we look up, followed by a 64-bit read of the combined hash_len field. That screws up the processor store to load forwarding, causing an unnecessary hickup in this critical routine. It's caused by the ugly calling convention for the "hash_name()" function, and easily fixed by just making hash_name() fill in the whole 'struct qstr' rather than passing it a pointer to just the hash value. With that, the profile for this function looks much smoother. Signed-off-by:
-
- 14 Sep, 2014 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "The most important patch is a new Light Weigth Syscall (LWS) for 8, 16, 32 and 64 bit atomic CAS operations which is required in order to be able to implement the atomic gcc builtins on our platform. Other than that, we wire up the seccomp, getrandom and memfd_create syscalls, fixes a minor off-by-one bug and a wrong printk string" * 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement new LWS CAS supporting 64 bit operations. parisc: Wire up seccomp, getrandom and memfd_create syscalls parisc: dino: fix %d confusingly prefixed with 0x in format string parisc: sys_hpux: NUL terminator is one past the end
-
Al Viro authored
in the former we simply check if dentry is still valid after picking its ->d_inode; in the latter we fetch ->d_inode in the same places where we fetch dentry and its ->d_seq, under the same checks. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by:
-
