- 28 Sep, 2021 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-28 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 14 day(s) which contain a total of 11 files changed, 139 insertions(+), 53 deletions(-). The main changes are: 1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk. 2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh. 3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann. 4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer. 6) Fix return value handling for struct_ops BPF programs, from Hou Tao. 7) Various fixes to BPF selftests, from Jiri Benc. ==================== Signed-off-by:David S. Miller <davem@davemloft.net> ,
-
Arnd Bergmann authored
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Horatiu Vultur authored
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c39 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Kuniyuki Iwashima authored
unix_create1() returns NULL on error, and the callers assume that it never fails for reasons other than out of memory. So, the callers always return -ENOMEM when unix_create1() fails. However, it also returns NULL when the number of af_unix sockets exceeds twice the limit controlled by sysctl: fs.file-max. In this case, the callers should return -ENFILE like alloc_empty_file(). This patch changes unix_create1() to return the correct error value instead of NULL on error. Out of curiosity, the assumption has been wrong since 1999 due to this change introduced in 2.2.4 [0]. diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999 +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999 @@ -388,6 +413,9 @@ { struct sock *sk; + if (atomic_read(&unix_nr_socks) >= 2*max_files) + return NULL; + MOD_INC_USE_COUNT; sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1); if (!sk) { [0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Eric Dumazet authored
up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Randy Dunlap authored
When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aaron Young <aaron.young@oracle.com> Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by:
-
Shannon Nelson authored
Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993 ("ionic: pull per-q stats work out of queue loops") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller authored
nguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-09-27 This series contains updates to e100 driver only. Jake corrects under allocation of register buffer due to incorrect calculations and fixes buffer overrun of register dump. ==================== Signed-off-by: -
Arnd Bergmann authored
Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: -
Arnd Bergmann authored
An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Johan Almbladh authored
Fix the case where the dst register maps to %rax as otherwise this produces an incorrect mapping with the implementation in 981f94c3 ("bpf: Add bitwise atomic instructions") as %rax is clobbered given it's part of the cmpxchg as operand. The issue is similar to b29dd96b ("bpf, x86: Fix BPF_FETCH atomic and/or/ xor with r0 as src") just that the case of dst register was missed. Before, dst=r0 (%rax) src=r2 (%rsi): [...] c5: mov %rax,%r10 c8: mov 0x0(%rax),%rax <---+ (broken) cc: mov %rax,%r11 | cf: and %rsi,%r11 | d2: lock cmpxchg %r11,0x0(%rax) <---+ d8: jne 0x00000000000000c8 | da: mov %rax,%rsi | dd: mov %r10,%rax | [...] | | After, dst=r0 (%rax) src=r2 (%rsi): | | [...] | da: mov %rax,%r10 | dd: mov 0x0(%r10),%rax <---+ (fixed) e1: mov %rax,%r11 | e4: and %rsi,%r11 | e7: lock cmpxchg %r11,0x0(%r10) <---+ ed: jne 0x00000000000000dd ef: mov %rax,%rsi f2: mov %r10,%rax [...] The remaining combinations were fine as-is though: After, dst=r9 (%r15) src=r0 (%rax): [...] dc: mov %rax,%r10 df: mov 0x0(%r15),%rax e3: mov %rax,%r11 e6: and %r10,%r11 e9: lock cmpxchg %r11,0x0(%r15) ef: jne 0x00000000000000df _ f1: mov %rax,%r10 | (unneeded, but f4: mov %r10,%rax _| not a problem) [...] After, dst=r9 (%r15) src=r4 (%rcx): [...] de: mov %rax,%r10 e1: mov 0x0(%r15),%rax e5: mov %rax,%r11 e8: and %rcx,%r11 eb: lock cmpxchg %r11,0x0(%r15) f1: jne 0x00000000000000e1 f3: mov %rax,%rcx f6: mov %r10,%rax [...] The case of dst == src register is rejected by the verifier and therefore not supported, but x86 JIT also handles this case just fine. After, dst=r0 (%rax) src=r0 (%rax): [...] eb: mov %rax,%r10 ee: mov 0x0(%r10),%rax f2: mov %rax,%r11 f5: and %r10,%r11 f8: lock cmpxchg %r11,0x0(%r10) fe: jne 0x00000000000000ee 100: mov %rax,%r10 103: mov %r10,%rax [...] Fixes: 981f94c3 ("bpf: Add bitwise atomic instructions") Reported-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Brendan Jackman <jackmanb@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Jiri Benc authored
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20f but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20f ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
BPF test infra has some hacks in place which kzalloc() a socket and perform minimum init via sock_net_set() and sock_init_data(). As a result, the sk's skcd->cgroup is NULL since it didn't go through proper initialization as it would have been the case from sk_alloc(). Rather than re-adding a NULL test in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test socket. The latter also allows to get rid of the bpf_sk_storage_free() special case. Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: b7a1848e ("bpf: add BPF_PROG_TEST_RUN support for flow dissector") Fixes: 2cb494a3 ("bpf: add tests for direct packet access from CGROUP_SKB") Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Signed-off-by: -
Daniel Borkmann authored
If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224 due to commit e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net
-
Kumar Kartikeya Dwivedi authored
When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a4634922 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by:Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
Dave Marchevsky authored
BPF folks maintain these and they're not picked up by the current MAINTAINERS entries. Files caught by the added globs: include/linux/btf.h include/linux/btf_ids.h include/uapi/linux/btf.h Signed-off-by:
Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by:
-
Lorenz Bauer authored
When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat programs with CAP_BPF as privileged for the purpose of JIT memory allocation. This means that a program without CAP_BPF can block a program with CAP_BPF from loading a program. Fix this by checking bpf_capable() in bpf_jit_charge_modmem(). Fixes: 2c78ee89 ("bpf: Implement CAP_BPF") Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
-
- 27 Sep, 2021 15 commits
-
-
Jacob Keller authored
The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
commit abf9b902 ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902 ("e100: cleanup unneeded math") Reported-by:
-
Xu Liang authored
GPY115 need reset PHY when it comes out from loopback mode if the firmware version number (lower 8 bits) is equal to or below 0x76. Fixes: 7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by:
Xu Liang <lxu@maxlinear.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'mac80211-for-net-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== Some fixes: * potential use-after-free in CCMP/GCMP RX processing * potential use-after-free in TX A-MSDU processing * revert to low data rates for no-ack as the commit broke other things * limit VHT MCS/NSS in radiotap injection * drop frames with invalid addresses in IBSS mode * check rhashtable_init() return value in mesh * fix potentially unaligned access in mesh * fix late beacon hrtimer handling in hwsim (syzbot) * fix documentation for PTK0 rekeying ==================== Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6xxx: MTU fixes These three patches fix MTU issues reported by 曹煜. There are two different ways of configuring the MTU in the hardware. The 6161 family is using the wrong method. Some of the marvell switch enforce the MTU when the port is used for CPU/DSA, some don't. Because of the extra header, the MTU needs increasing with this overhead. ==================== Signed-off-by: -
Andrew Lunn authored
Same members of the Marvell Ethernet switches impose MTU restrictions on ports used for connecting to the CPU or another switch for DSA. If the MTU is set too low, tagged frames will be discarded. Ensure the worst case tagger overhead is included in setting the MTU for DSA and CPU ports. Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by:
-
Andrew Lunn authored
The MTU passed to the DSA driver is the payload size, typically 1500. However, the switch uses the frame size when applying restrictions. Adjust the MTU with the size of the Ethernet header and the frame checksum. The VLAN header also needs to be included when the frame size it per port, but not when it is global. Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by:
-
Andrew Lunn authored
The datasheets suggests the 6161 uses a per port setting for jumbo frames. Testing has however shown this is not correct, it uses the old style chip wide MTU control. Change the ops in the 6161 structure to reflect this. Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by:
-
Yanfei Xu authored
Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by:Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by:
-
Desnes A. Nunes do Rosario authored
This reverts commit d437f5aa. Code has been duplicated through commit <273c29e9> "ibmvnic: check failover_pending in login response" Signed-off-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by:
-
Matthew Hagan authored
This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.comSigned-off-by:
Matthew Hagan <mnhagan88@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alexander Wetzel authored
@IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX. Move the requirement to the correct section in the PTK0 rekey documentation. Signed-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.deSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
MichelleJin authored
When rhashtable_init() fails, it returns -EINVAL. However, since error return value of rhashtable_init is not checked, it can cause use of uninitialized pointers. So, fix unhandled errors of rhashtable_init. Signed-off-by:
MichelleJin <shjy180909@gmail.com> Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.comSigned-off-by:
-
Johannes Berg authored
When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca92 ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. Cc: stable@vger.kernel.org Fixes: bf30ca92 ("mac80211: check defrag PN against current frame") Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeidSigned-off-by:
-
- 26 Sep, 2021 1 commit
-
-
王贇 authored
We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by:
Abaci <abaci@linux.alibaba.com> Signed-off-by:
Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by:
-
- 25 Sep, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net 1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT, from Jozsef Kadlecsik. 2) Check ip_vs_conn_tab_bits value to be in the range specified in Kconfig, from Andrea Claudi. 3) Initialize fragment offset in ip6tables, from Jeremy Sowden. 4) Make conntrack hash chain length random, from Florian Westphal. 5) Add zone ID to conntrack and NAT hashtuple again, also from Florian. 6) Add selftests for bidirectional zone support and colliding tuples, from Florian Westphal. 7) Unlink table before synchronize_rcu when cleaning tables with owner, from Florian. 8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT. 9) Release conntrack entries via workqueue in masquerade, from Florian. 10) Fix bogus net_init in iptables raw table definition, also from Florian. 11) Work around missing softdep in log extensions, from Florian Westphal. 12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: conntrack: serialize hash resizes and cleanups netfilter: log: work around missing softdep backend module netfilter: iptable_raw: drop bogus net_init annotation netfilter: nf_nat_masquerade: defer conntrack walk to work queue netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic netfilter: nf_tables: Fix oversized kvmalloc() calls netfilter: nf_tables: unlink table before deleting it selftests: netfilter: add zone stress test with colliding tuples selftests: netfilter: add selftest for directional zone support netfilter: nat: include zone id in nat table hash again netfilter: conntrack: include zone id in tuple hash again netfilter: conntrack: make max chain length random netfilter: ip6_tables: zero-initialize fragment offset ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 netfilter: ipset: Fix oversized kvmalloc() calls ==================== Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 24 Sep, 2021 5 commits
-
-
Daniele Palmas authored
Fix double free_netdev when mhi_prepare_for_transfer fails. Fixes: 3ffec6a1 ("net: Add mhi-net driver") Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Reviewed-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Aaro Koskinen authored
After commit 05b35e7e ("smsc95xx: add phylib support"), link changes are no longer propagated to usbnet. As a result, rx URB allocation won't happen until there is a packet sent out first (this might never happen, e.g. running just ssh server with a static IP). Fix by triggering usbnet EVENT_LINK_CHANGE. Fixes: 05b35e7e ("smsc95xx: add phylib support") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Xiao Liang authored
Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop() to get the length of rtnexthop correct. Fixes: b0f60193 ("ipv4: Refactor nexthop attributes in fib_dump_info") Signed-off-by:
Xiao Liang <shaw.leon@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
The enetc phylink .mac_config handler intends to clear the IFMODE field (bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the other fields instead. For normal operation, the bug was inconsequential, due to the fact that we write the PM0_IF_MODE register in two stages, first in phylink .mac_config (which incorrectly cleared out a bunch of stuff), then we update the speed and duplex to the correct values in phylink .mac_link_up. Judging by the code (not tested), it looks like maybe loopback mode was broken, since this is one of the settings in PM0_IF_MODE which is incorrectly cleared. Fixes: c76a9721 ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode") Reported-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Bug fixes This patch set includes two separate fixes for the net tree: Patch 1 makes sure that MPTCP token searches are always limited to the appropriate net namespace. Patch 2 allows userspace to always change the backup settings for configured endpoints even if those endpoints are not currently in use. ==================== Signed-off-by:
-
