- 24 Feb, 2015 40 commits
-
-
Dave Chinner authored
commit f19b872b upstream. This leads to log recovery throwing errors like: XFS (md0): Mounting V5 Filesystem XFS (md0): Starting recovery (logdev: internal) XFS (md0): Unknown buffer type 0! XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1 ffff8800ffc53800: 58 41 47 49 ..... Which is the AGI buffer magic number. Ensure that we set the type appropriately in both unlink list addition and removal. Tested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Dave Chinner authored
commit 0d612fb5 upstream. Jan Kara reported that log recovery was finding buffers with invalid types in them. This should not happen, and indicates a bug in the logging of buffers. To catch this, add asserts to the buffer formatting code to ensure that the buffer type is in range when the transaction is committed. We don't set a type on buffers being marked stale - they are not going to get replayed, the format item exists only for recovery to be able to prevent replay of the buffer, so the type does not matter. Hence that needs special casing here. Reported-by:
-
Andrey Ryabinin authored
commit 6d1cff2a upstream. We hit use after free on dereferncing pointer to task_smack struct in smk_of_task() called from smack_task_to_inode(). task_security() macro uses task_cred_xxx() to get pointer to the task_smack. task_cred_xxx() could be used only for non-pointer members of task's credentials. It cannot be used for pointer members since what they point to may disapper after dropping RCU read lock. Mainly task_security() used this way: smk_of_task(task_security(p)) Intead of this introduce function smk_of_task_struct() which takes task_struct as argument and returns pointer to smk_known struct and do this under RCU read lock. Bogus task_security() macro is not used anymore, so remove it. KASan's report for this: AddressSanitizer: use after free in smack_task_to_inode+0x50/0x70 at addr c4635600 ============================================================================= BUG kmalloc-64 (Tainted: PO): kasan error ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in new_task_smack+0x44/0xd8 age=39 cpu=0 pid=1866 kmem_cache_alloc_trace+0x88/0x1bc new_task_smack+0x44/0xd8 smack_cred_prepare+0x48/0x21c security_prepare_creds+0x44/0x4c prepare_creds+0xdc/0x110 smack_setprocattr+0x104/0x150 security_setprocattr+0x4c/0x54 proc_pid_attr_write+0x12c/0x194 vfs_write+0x1b0/0x370 SyS_write+0x5c/0x94 ret_fast_syscall+0x0/0x48 INFO: Freed in smack_cred_free+0xc4/0xd0 age=27 cpu=0 pid=1564 kfree+0x270/0x290 smack_cred_free+0xc4/0xd0 security_cred_free+0x34/0x3c put_cred_rcu+0x58/0xcc rcu_process_callbacks+0x738/0x998 __do_softirq+0x264/0x4cc do_softirq+0x94/0xf4 irq_exit+0xbc/0x120 handle_IRQ+0x104/0x134 gic_handle_irq+0x70/0xac __irq_svc+0x44/0x78 _raw_spin_unlock+0x18/0x48 sync_inodes_sb+0x17c/0x1d8 sync_filesystem+0xac/0xfc vdfs_file_fsync+0x90/0xc0 vfs_fsync_range+0x74/0x7c INFO: Slab 0xd3b23f50 objects=32 used=31 fp=0xc4635600 flags=0x4080 INFO: Object 0xc4635600 @offset=5632 fp=0x (null) Bytes b4 c46355f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object c4635600: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635610: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635620: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635630: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone c4635640: bb bb bb bb .... Padding c46356e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding c46356f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 5 PID: 834 Comm: launchpad_prelo Tainted: PBO 3.10.30 #1 Backtrace: [<c00233a4>] (dump_backtrace+0x0/0x158) from [<c0023dec>] (show_stack+0x20/0x24) r7:c4634010 r6:d3b23f50 r5:c4635600 r4:d1002140 [<c0023dcc>] (show_stack+0x0/0x24) from [<c06d6d7c>] (dump_stack+0x20/0x28) [<c06d6d5c>] (dump_stack+0x0/0x28) from [<c01c1d50>] (print_trailer+0x124/0x144) [<c01c1c2c>] (print_trailer+0x0/0x144) from [<c01c1e88>] (object_err+0x3c/0x44) r7:c4635600 r6:d1002140 r5:d3b23f50 r4:c4635600 [<c01c1e4c>] (object_err+0x0/0x44) from [<c01cac18>] (kasan_report_error+0x2b8/0x538) r6:d1002140 r5:d3b23f50 r4:c6429cf8 r3:c09e1aa7 [<c01ca960>] (kasan_report_error+0x0/0x538) from [<c01c9430>] (__asan_load4+0xd4/0xf8) [<c01c935c>] (__asan_load4+0x0/0xf8) from [<c031e168>] (smack_task_to_inode+0x50/0x70) r5:c4635600 r4:ca9da000 [<c031e118>] (smack_task_to_inode+0x0/0x70) from [<c031af64>] (security_task_to_inode+0x3c/0x44) r5:cca25e80 r4:c0ba9780 [<c031af28>] (security_task_to_inode+0x0/0x44) from [<c023d614>] (pid_revalidate+0x124/0x178) r6:00000000 r5:cca25e80 r4:cbabe3c0 r3:00008124 [<c023d4f0>] (pid_revalidate+0x0/0x178) from [<c01db98c>] (lookup_fast+0x35c/0x43y4) r9:c6429efc r8:00000101 r7:c079d940 r6:c6429e90 r5:c6429ed8 r4:c83c4148 [<c01db630>] (lookup_fast+0x0/0x434) from [<c01deec8>] (do_last.isra.24+0x1c0/0x1108) [<c01ded08>] (do_last.isra.24+0x0/0x1108) from [<c01dff04>] (path_openat.isra.25+0xf4/0x648) [<c01dfe10>] (path_openat.isra.25+0x0/0x648) from [<c01e1458>] (do_filp_open+0x3c/0x88) [<c01e141c>] (do_filp_open+0x0/0x88) from [<c01ccb28>] (do_sys_open+0xf0/0x198) r7:00000001 r6:c0ea2180 r5:0000000b r4:00000000 [<c01cca38>] (do_sys_open+0x0/0x198) from [<c01ccc00>] (SyS_open+0x30/0x34) [<c01ccbd0>] (SyS_open+0x0/0x34) from [<c001db80>] (ret_fast_syscall+0x0/0x48) Read of size 4 by thread T834: Memory state around the buggy address: c4635380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635400: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc c4635480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635500: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc c4635580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >c4635600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ c4635680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb c4635700: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc c4635780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635800: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc c4635880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> [ luis: backported to 3.16: - dropped changes to smk_bu_task() - adjusted context ] Signed-off-by:
-
Jeff Moyer authored
commit c6ce1943 upstream. Hi, If you can manage to submit an async write as the first async I/O from the context of a process with realtime scheduling priority, then a cfq_queue is allocated, but filed into the wrong async_cfqq bucket. It ends up in the best effort array, but actually has realtime I/O scheduling priority set in cfqq->ioprio. The reason is that cfq_get_queue assumes the default scheduling class and priority when there is no information present (i.e. when the async cfqq is created): static struct cfq_queue * cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic, struct bio *bio, gfp_t gfp_mask) { const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio); cic->ioprio starts out as 0, which is "invalid". So, class of 0 (IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so: async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio); static struct cfq_queue ** cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio) { switch (ioprio_class) { case IOPRIO_CLASS_RT: return &cfqd->async_cfqq[0][ioprio]; case IOPRIO_CLASS_NONE: ioprio = IOPRIO_NORM; /* fall through */ case IOPRIO_CLASS_BE: return &cfqd->async_cfqq[1][ioprio]; case IOPRIO_CLASS_IDLE: return &cfqd->async_idle_cfqq; default: BUG(); } } Here, instead of returning a class mapped from the process' scheduling priority, we get back the bucket associated with IOPRIO_CLASS_BE. Now, there is no queue allocated there yet, so we create it: cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask); That function ends up doing this: cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync); cfq_init_prio_data(cfqq, cic); cfq_init_cfqq marks the priority as having changed. Then, cfq_init_prio data does this: ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); switch (ioprio_class) { default: printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class); case IOPRIO_CLASS_NONE: /* * no prio set, inherit CPU scheduling settings */ cfqq->ioprio = task_nice_ioprio(tsk); cfqq->ioprio_class = task_nice_ioclass(tsk); break; So we basically have two code paths that treat IOPRIO_CLASS_NONE differently, which results in an RT async cfqq filed into a best effort bucket. Attached is a patch which fixes the problem. I'm not sure how to make it cleaner. Suggestions would be welcome. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Rick Dunn authored
commit 9a5abdaa upstream. T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17cf Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=54271E3298CD C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Firmware is extracted from the latest Broadcom BCM4352 Windows driver by extracting the zip and searching the .hex file names for '17cf'. The hex file must then be converted to hcd format using the hex2hcd utility and then moved to /lib/firmware/brcm/. Signed-off-by:
Rick Dunn <rick@rickdunn.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit 033efa92 upstream. Add support of 13d3:3423 device. BugLink: https://bugs.launchpad.net/bugs/1411193 T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3423 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Lokesh Vutla authored
commit 1c7e36bf upstream. With commit '7dedd346: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS. On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on BeagleBoard-X15, where we use UART3 for console, boot fails with DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod. For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig. Fixes: 90020c7b ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data") Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 478913fd upstream. The driver mismatched 'num_supplicants' with 'num_supplies' of power_supply structure. It provided list of supplicants (power_supply.supplied_to) but did not set the number of supplicants. Instead it set the num_supplies which is used when iterating over number of supplies (power_supply.supplied_from). As a result the list of supplicants was ignored by core because its size was 0. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit faeed51b upstream. enable_irq_wakeup returns 0 in case it correctly enabled the IRQ to generate the wakeup event (and thus resume should call disable_irq_wake). Currently gpio-charger driver has this logic inverted. Correct that thus correcting enable/disable_irq_wake() calls balance. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Eyal Shapira authored
commit 2cee4762 upstream. These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Jisheng Zhang authored
commit 62cf983a upstream. Commit 0dcaa249 ("sdhci-pxav3: Fix runtime PM initialization") tries to fix one hang issue caused by calling sdhci_add_host() on a suspended device. The fix enables the clock twice, once by clk_prepare_enable() and another by pm_runtime_get_sync(), meaning that the clock will never be gated at runtime PM suspend. I observed the power consumption regression on Marvell BG2Q SoCs. In fact, the fix is not correct. There still be a very small window during which a runtime suspend might somehow occur after pm_runtime_enable() but before pm_runtime_get_sync(). This patch fixes all of the two problems by just incrementing the usage counter before pm_runtime_enable(). It also adjust the order of disabling runtime pm and storing the usage count in the error path to handle clock gating properly. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Christophe Ricard authored
commit c4eadfaf upstream. Add a return value check when reading data from the FIFO register. Reviewed-by:
Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com> Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Christophe Ricard authored
commit 1ba3b0b6 upstream. When sending data in tpm_stm_i2c_send, each loop iteration send buf. Send buf + i instead as the goal of this for loop is to send a number of byte from buf that fit in burstcnt. Once those byte are sent, we are supposed to send the next ones. The driver was working because the burstcount value returns always the maximum size for a TPM command or response. (0x800 for a command and 0x400 for a response). Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Hon Ching (Vicky) Lo authored
commit 84eb186b upstream. There was an oops in tpm_ibmvtpm_get_desired_dma, which caused kernel panic during boot when vTPM is enabled in Power partition configured in AMS mode. vio_bus_probe calls vio_cmo_bus_probe which calls tpm_ibmvtpm_get_desired_dma to get the size needed for DMA allocation. The problem is, vio_cmo_bus_probe is called before calling probe, which for vtpm is tpm_ibmvtpm_probe and it's this function that initializes and sets up vtpm's CRQ and gets required data values. Therefore, since this has not yet been done, NULL is returned in attempt to get the size for DMA allocation. We added a NULL check. In addition, a default buffer size will be set when NULL is returned. Signed-off-by:
Hon Ching (Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
-
Scot Doyle authored
commit 448e9c55 upstream. Some machines, such as the Acer C720 and Toshiba CB35, have TPMs that do not send IRQs while also having an ACPI TPM entry indicating that they will be sent. These machines freeze on resume while the tpm_tis module waits for an IRQ, eventually timing out. When in interrupt mode, the tpm_tis module should receive an IRQ during module init. Fall back to polling mode if none is received when expected. Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Tested-by:
Michael Mullin <masmullin@gmail.com> Reviewed-by:
-
Kiran Padwal authored
commit bb95cd34 upstream. Currently these driver are missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds a missing check for tpm_i2c_atmel.c and tpm_i2c_nuvoton.c Signed-off-by:
Kiran Padwal <kiran.padwal@smartplayin.com> Reviewed-By:
-
David Howells authored
commit 398a1e71 upstream. Add newly registered TPMs to the tail of the list, not the beginning, so that things that are specifying TPM_ANY_NUM don't find that the device they're using has inadvertently changed. Adding a second device would break IMA, for instance. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
-
Calvin Owens authored
commit 28423ad2 upstream. While debugging an issue with excessive softirq usage, I encountered the following note in commit 3e339b5d ("softirq: Use hotplug thread infrastructure"): [ paulmck: Call rcu_note_context_switch() with interrupts enabled. ] ...but despite this note, the patch still calls RCU with IRQs disabled. This seemingly innocuous change caused a significant regression in softirq CPU usage on the sending side of a large TCP transfer (~1 GB/s): when introducing 0.01% packet loss, the softirq usage would jump to around 25%, spiking as high as 50%. Before the change, the usage would never exceed 5%. Moving the call to rcu_note_context_switch() after the cond_sched() call, as it was originally before the hotplug patch, completely eliminated this problem. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
David Sterba authored
commit 381cf658 upstream. If btrfs_find_item is called with NULL path it allocates one locally but does not free it. Affected paths are inserting an orphan item for a file and for a subvol root. Move the path allocation to the callers. Fixes: 3f870c28 ("btrfs: expand btrfs_find_item() to include find_orphan_item functionality") Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Matthew Wilcox authored
commit 91117a20 upstream. The 'pfn' returned by axonram was completely bogus, and has been since 2008. Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 6fbb9bdf upstream. -EDEFER error wasn't handle properly by atmel_serial_probe(). As an example, when atmel_serial_probe() is called for the first time, we pass the test_and_set_bit() test to check whether the port has already been initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly returned before by clk_get(). Consequently atmel_serial_probe() used to return this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask. When atmel_serial_probe() was called for the second time, it used to fail on the test_and_set_bit() function then returning -EBUSY. When atmel_serial_probe() fails, this patch make it clear the port bit in the "atmel_ports_in_use" mask, if needed, before returning the error code. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Cyrille Pitchen authored
commit d4f64187 upstream. atmel_serial_probe() calls atmel_init_port(). In turn, atmel_init_port() calls clk_disable_unprepare() to disable the peripheral clock before returning. Later atmel_serial_probe() accesses some I/O registers such as the Mode and Control registers for RS485 support then the Name and Version registers, through a call to atmel_get_ip_name(), but at that moment the peripheral clock was still disabled. Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 5efd2ea8 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 145b3fe5 upstream. Some implementations of modprobe fail to load the driver for a PCI device automatically because the "interface" part of the modalias from the kernel is lowercase, and the modalias from file2alias is uppercase. The "interface" is the low-order byte of the Class Code, defined in PCI r3.0, Appendix D. Most interface types defined in the spec do not use alpha characters, so they won't be affected. For example, 00h, 01h, 10h, 20h, etc. are unaffected. Print the "interface" byte of the Class Code in uppercase hex, as we already do for the Vendor ID, Device ID, Class, etc. Commit 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") fixed only half of the problem. Some udev implementations rely on the uevent file and not the modalias file. Fixes: d1ded203 ("PCI: add MODALIAS to hotplug event for pci devices") Fixes: 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Sumit.Saxena@avagotech.com authored
commit c2ced171 upstream. Update driver "mask_interrupts" before enable/disable hardware interrupt in order to avoid missing interrupts because of "mask_interrupts" still set to 1 and hardware interrupts are enabled. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Chaitra Basappa <chaitra.basappa@avagotech.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dmitry Osipenko authored
commit de47699d upstream. Commit 58ecb23f ("ARM: tegra: add missing unit addresses to DT") added unit address and changed reg base for GR3D and DSI host1x modules, but these addresses belongs to GR2D and TVO modules respectively. Fix it by changing modules unit and reg base addresses to proper ones. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Fixes: 58ecb23f (ARM: tegra: add missing unit addresses to DT) Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jiri Kosina authored
commit 8e7b3410 upstream. The ignore check that got added in 6ce901eb ("HID: input: fix confusion on conflicting mappings") needs to properly check for VARIABLE reports as well (ARRAY reports should be ignored), otherwise legitimate keyboards might break. Fixes: 6ce901eb ("HID: input: fix confusion on conflicting mappings") Reported-by:
Fredrik Hallenberg <megahallon@gmail.com> Reported-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David Herrmann authored
commit 6ce901eb upstream. On an PC-101/103/104 keyboard (American layout) the 'Enter' key and its neighbours look like this: +---+ +---+ +-------+ | 1 | | 2 | | 5 | +---+ +---+ +-------+ +---+ +-----------+ | 3 | | 4 | +---+ +-----------+ On a PC-102/105 keyboard (European layout) it looks like this: +---+ +---+ +-------+ | 1 | | 2 | | | +---+ +---+ +-+ 4 | +---+ +---+ | | | 3 | | 5 | | | +---+ +---+ +-----+ (Note that the number of keys is the same, but key '5' is moved down and the shape of key '4' is changed. Keys '1' to '3' are exactly the same.) The keys 1-4 report the same scan-code in HID in both layouts, even though the keysym they produce is usually different depending on the XKB-keymap used by user-space. However, key '5' (US 'backslash'/'pipe') reports 0x31 for the upper layout and 0x32 for the lower layout, as defined by the HID spec. This is highly confusing as the linux-input API uses a single keycode for both. So far, this was never a problem as there never has been a keyboard with both of those keys present at the same time. It would have to look something like this: +---+ +---+ +-------+ | 1 | | 2 | | x31 | +---+ +---+ +-------+ +---+ +---+ +-----+ | 3 | |x32| | 4 | +---+ +---+ +-----+ HID can represent such a keyboard, but the linux-input API cannot. Furthermore, any user-space mapping would be confused by this and, luckily, no-one ever produced such hardware. Now, the HID input layer fixed this mess by mapping both 0x31 and 0x32 to the same keycode (KEY_BACKSLASH==0x2b). As only one of both physical keys is present on a hardware, this works just fine. Lets introduce hardware-vendors into this: ------------------------------------------ Unfortunately, it seems way to expensive to produce a different device for American and European layouts. Therefore, hardware-vendors put both keys, (0x31 and 0x32) on the same keyboard, but only one of them is hooked up to the physical button, the other one is 'dead'. This means, they can use the same hardware, with a different button-layout and automatically produce the correct HID events for American *and* European layouts. This is unproblematic for normal keyboards, as the 'dead' key will never report any KEY-DOWN events. But RollOver keyboards send the whole matrix on each key-event, allowing n-key roll-over mode. This means, we get a 0x31 and 0x32 event on each key-press. One of them will always be 0, the other reports the real state. As we map both to the same keycode, we will get spurious key-events, even though the real key-state never changed. The easiest way would be to blacklist 'dead' keys and never handle those. We could simply read the 'country' tag of USB devices and blacklist either key according to the layout. But... hardware vendors... want the same device for all countries and thus many of them set 'country' to 0 for all devices. Meh.. So we have to deal with this properly. As we cannot know which of the keys is 'dead', we either need a heuristic and track those keys, or we simply make use of our value-tracking for HID fields. We simply ignore HID events for absolute data if the data didn't change. As HID tracks events on the HID level, we haven't done the keycode translation, yet. Therefore, the 'dead' key is tracked independently of the real key, therefore, any events on it will be ignored. This patch simply discards any HID events for absolute data if it didn't change compared to the last report. We need to ignore relative and buffered-byte reports for obvious reasons. But those cannot be affected by this bug, so we're fine. Preferably, we'd do this filtering on the HID-core level. But this might break a lot of custom drivers, if they do not follow the HID specs. Therefore, we do this late in hid-input just before we inject it into the input layer (which does the exact same filtering, but on the keycode level). If this turns out to break some devices, we might have to limit filtering to EV_KEY events. But lets try to do the Right Thing first, and properly filter any absolute data that didn't change. This patch is tagged for 'stable' as it fixes a lot of n-key RollOver hardware. We might wanna wait with backporting for a while, before we know it doesn't break anything else, though. Reported-by:
Adam Goode <adam@spicenitz.org> Reported-by:
-
Martin Vajnar authored
commit a52d2093 upstream. Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped working. This patch enables the "replacement" for REGULATOR_DUMMY and allows the touchscreen to work even though there is no regulator for "vcc". Signed-off-by:
Martin Vajnar <martin.vajnar@gmail.com> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit baad2dc4 upstream. Add regulator_has_full_constraints() call to spitz board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on spitz if regulators are enabled: ads7846 spi2.0: unable to get regulator: -517 spi spi2.0: Driver ads7846 requests probe deferral Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 9bc78f32 upstream. Add regulator_has_full_constraints() call to poodle board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on poodle if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 271e8017 upstream. Add regulator_has_full_constraints() call to corgi board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on corgi if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 corgi-audio corgi-audio: ASoC: failed to instantiate card -517 Signed-off-by:
-
Russell King authored
commit 32e63f03 upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-video. Fix these. Fixes: a61f6811 ("[media] em28xx-video: implement em28xx_ops: suspend/resume hooks") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Russell King authored
commit a084c57f upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-dvb. Fix these. Fixes: ca2b46da ("[media] em28xx-dvb: implement em28xx_ops: suspend/resume hooks") Signed-off-by:
-
Russell King authored
commit fbaa48d1 upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-audio. Fix these. Fixes: 6d746f91 ("[media] em28xx-audio: implement em28xx_ops: suspend/resume hooks") Signed-off-by:
-
Russell King authored
commit 7818b0aa upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-audio. Fix these. Fixes: 1b3fd2d3 ("[media] em28xx-audio: don't hardcode audio URB calculus") Signed-off-by:
-
Russell King authored
commit 522adc7c upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-core. Fix these. Fixes: 9c669b73 ("[media] em28xx: add suspend/resume to em28xx_ops") Signed-off-by:
-
Russell King authored
commit ebfd59cf upstream. Inspection shows that newlines are missing from several kernel messages in em28xx-input. Fix these. Fixes: 5025076a ("[media] em28xx-input: implement em28xx_ops: suspend/resume hooks") Signed-off-by:
-
Russell King authored
commit 0418ca60 upstream. The lockdep splat addressed in a previous commit revealed that at least one message in em28xx-input.c was missing a new line: em28178 #0: Closing input extensionINFO: trying to register non-static key. Further inspection shows several other messages also miss a new line. These will be fixed in a subsequent patch. Fixes: aa929ad7 ("[media] em28xx: print a message at disconnect") Signed-off-by:
-
Russell King authored
commit bbfebeea upstream. Removing the em28xx-rc module results in the following lockdep splat, which is caused by trying to call cancel_delayed_work_sync() on an uninitialised delayed work. Fix this by ensuring we always initialise the work. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 2183 Comm: rmmod Not tainted 3.18.0+ #1464 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0012228>] (dump_backtrace) from [<c00123c0>] (show_stack+0x18/0x1c) r6:c1419d2c r5:00000000 r4:00000000 r3:00000000 [<c00123a8>] (show_stack) from [<c06e2550>] (dump_stack+0x7c/0x98) [<c06e24d4>] (dump_stack) from [<c0061c94>] (__lock_acquire+0x16d4/0x1bb0) r4:edf19f74 r3:df049380 [<c00605c0>] (__lock_acquire) from [<c00626d4>] (lock_acquire+0xb0/0x124) r10:00000000 r9:c003ba90 r8:00000000 r7:00000000 r6:00000000 r5:edf19f74 r4:00000000 [<c0062624>] (lock_acquire) from [<c003bad4>] (flush_work+0x44/0x264) r10:00000000 r9:eaa86000 r8:edf190b0 r7:edf19f74 r6:00000001 r5:edf19f64 r4:00000000 [<c003ba90>] (flush_work) from [<c003d8f0>] (__cancel_work_timer+0x8c/0x124) r7:00000000 r6:00000001 r5:00000000 r4:edf19f64 [<c003d864>] (__cancel_work_timer) from [<c003d99c>] (cancel_delayed_work_sync+0x14/0x18) r7:00000000 r6:eccc3600 r5:00000000 r4:edf19000 [<c003d988>] (cancel_delayed_work_sync) from [<bf0b5c10>] (em28xx_ir_fini+0x48/0xd8 [em28xx_rc]) [<bf0b5bc8>] (em28xx_ir_fini [em28xx_rc]) from [<bf08a0a8>] (em28xx_unregister_extension+0x40/0x94 [em28xx]) r8:c000edc4 r7:00000081 r6:bf092bf4 r5:bf0b6a2c r4:edf19000 r3:bf0b5bc8 [<bf08a068>] (em28xx_unregister_extension [em28xx]) from [<bf0b64dc>] (em28xx_rc_unregister+0x14/0x1c [em28xx_rc]) r6:00000800 r5:00000000 r4:bf0b6a50 r3:bf0b64c8 [<bf0b64c8>] (em28xx_rc_unregister [em28xx_rc]) from [<c0096710>] (SyS_delete_module+0x11c/0x180) [<c00965f4>] (SyS_delete_module) from [<c000ec00>] (ret_fast_syscall+0x0/0x48) r6:00000001 r5:beb0f813 r4:b8b17d00 Fixes: f5222609 ("[media] em28xx: extend the support for device buttons") Signed-off-by:
-
