- 31 Oct, 2022 1 commit
-
-
Zack Rusin authored
Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor. Signed-off-by:
Zack Rusin <zackr@vmware.com> Fixes: 2ac86371 ("vmwgfx: Snoop DMA transfers with non-covering sizes") Cc: <stable@vger.kernel.org> # v3.2+ Reviewed-by:
Michael Banack <banackm@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
-
- 29 Oct, 2022 5 commits
-
-
Zhang Qilong authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with the newest pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Fixes: cca1705c ("drm/rockchip: lvds: Add PX30 support") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
-
Yuan Can authored
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid device usage counter leak. Signed-off-by:
Yuan Can <yuancan@huawei.com> Signed-off-by:
-
Jiapeng Chong authored
The function dsi_update_bits() is defined in the dw-mipi-dsi-rockchip.c file, but not called elsewhere, so delete this unused function. drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:367:20: warning: unused function 'dsi_update_bits'. https://bugzilla.openanolis.cn/show_bug.cgi?id=2414Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Sascha Hauer authored
Esmart0-win0 could serve as primary plane, so mark it as such. On RK3568 this window will never be used as primary plane, because the three windows at the beginning of the rk3568_vop_win_data[] array will be used. On RK3566 however, two of the windows at the beginning of the rk3568_vop_win_data[] array cannot not be used due to hardware limitations, so without this patch we end up with CRTCs without primary planes when multiple VPs are active. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
-
Johan Jonker authored
The function rockchip_drm_framebuffer_init() was in use in the rockchip_drm_fbdev.c file, but that is now replaced by a generic fbdev setup. Reduce the image size by removing the rockchip_drm_framebuffer_init() and sub function rockchip_fb_alloc() and cleanup the rockchip_drm_fb.h header file. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
John Keeping <john@metanate.com> Signed-off-by:
-
- 28 Oct, 2022 8 commits
-
-
Ahmad Fatoum authored
adv7511 probe may need to be attempted multiple times before no -EPROBE_DEFER is returned. Currently, every such probe results in an error message: [ 4.534229] adv7511 1-003d: failed to find dsi host [ 4.580288] adv7511 1-003d: failed to find dsi host This is misleading, as there is no error and probe deferral is normal behavior. Fix this by using dev_err_probe that will suppress -EPROBE_DEFER errors. While at it, we touch all dev_err in the probe path. This makes the code more concise and included the error code everywhere to aid user in debugging. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de
-
Maxime Ripard authored
Following the clock rate range improvements to the clock framework, trying to set a disjoint range on a clock will now result in an error. Thus, we can't set a minimum rate higher than the maximum reported by the firmware, or clk_set_min_rate() will fail. Thus we need to clamp the rate we are about to ask for to the maximum rate possible on that clock. Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-7-fe9e7ac8b111@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Dom Cobley authored
At least the 4096x2160@60Hz mode requires some overclocking that isn't available by default, even if hdmi_enable_4kp60 is enabled. Let's add some logic to detect whether we can satisfy the core clock requirements for that mode, and prevent it from being used otherwise. Signed-off-by:
Dom Cobley <popcornmix@gmail.com> Reviewed-by:
-
Maxime Ripard authored
In order to support higher HDMI frequencies, users have to set the hdmi_enable_4kp60 parameter in their config.txt file. This will have the side-effect of raising the maximum of the core clock, tied to the HVS, and managed by the HVS driver. However, we are querying this in the HDMI driver by poking into the HVS structure to get our struct clk handle. Let's make this part of the HVS bind implementation to have all the core clock related setup in the same place. Reviewed-by:
-
Maxime Ripard authored
In order to support higher HDMI frequencies, users have to set the hdmi_enable_4kp60 parameter in their config.txt file. We were detecting this so far by calling clk_round_rate() on the core clock with the frequency we're supposed to run at when one of those modes is enabled. Whether or not the parameter was enabled could then be inferred by the returned rate since the maximum clock rate reported by the firmware was one of the side effect of setting that parameter. However, the recent clock rework we did changed what clk_round_rate() was returning to always return the minimum allowed, and thus this test wasn't reliable anymore. Let's use the new clk_get_max_rate() function to reliably determine the maximum rate allowed on that clock and fix the 4k@60Hz output. Fixes: e9d6cea2 ("clk: bcm: rpi: Run some clocks at the minimum rate allowed") Reviewed-by:
-
Maxime Ripard authored
The firmware allows to query for its clocks the operating range of a given clock. We'll need this for some drivers (KMS, in particular) to infer the state of some configuration options, so let's create a function to do so. Acked-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
-
Maxime Ripard authored
We'll need the clock IDs in more drivers than just the clock driver from now on, so let's move them in the firmware header. Reviewed-by:
-
Maxime Ripard authored
A significant number of RaspberryPi drivers using the firmware don't have a phandle to it, so end up scanning the device tree to find a node with the firmware compatible. That code is duplicated everywhere, so let's introduce a helper instead. Acked-by:
-
- 27 Oct, 2022 2 commits
-
-
Pin-yen Lin authored
`pm_runtime_get_sync` may return 1 on success. Fix the `if` statement here to make the code less confusing, even though additional calls to `it6505_poweron` doesn't break anything when it's already powered. This was reported by Dan Carpenter <dan.carpenter@oracle.com> in https://lore.kernel.org/all/Y1fMCs6VnxbDcB41@kili/ Fixes: 10517777 ("drm/bridge: it6505: Adapt runtime power management framework") Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Somalapuram Amaranath authored
Change ttm_resource structure from num_pages to size_t size in bytes. v1 -> v2: change PFN_UP(dst_mem->size) to ttm->num_pages v1 -> v2: change bo->resource->size to bo->base.size at some places v1 -> v2: remove the local variable v1 -> v2: cleanup cmp_size_smaller_first() v2 -> v3: adding missing PFN_UP in ttm_bo_vm_fault_reserved Signed-off-by:
Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221027091237.983582-1-Amaranath.Somalapuram@amd.comReviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 26 Oct, 2022 16 commits
-
-
Jani Nikula authored
Convert to drm_kms_dbg/drm_err where possible, and reference the connector using [CONNECTOR:%d:%s]. Pass connectors around a bit more to enable this. Where this is not possible, unify the rest of the debugs to DRM_DEBUG_KMS. Rewrite tile debug logging to one line while at it. v2: - Use [CONNECTOR:%d:%s] throughout (Ville) - Tile debug logging revamp - Pass connector around a bit more Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e48346bfe09a632d5a5faa55e3c161b196cf21e8.1666614699.git.jani.nikula@intel.com
-
Jani Nikula authored
Reference the connector using [CONNECTOR:%d:%s] in existing device based debug logging. Signed-off-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/5884410682bcbc032de4d3af8562c0b271edaa7f.1666614699.git.jani.nikula@intel.com
-
Jani Nikula authored
Conform to device specific logging. v2: Include [CONNECTOR:%d:%s] (Ville) Signed-off-by:
-
Jani Nikula authored
The EDID loader is internal to drm, not for drivers. Signed-off-by:
-
Jani Nikula authored
There's a lot going on here, but the main thing is switching the firmware EDID loader to use struct drm_edid. Unfortunately, it's difficult to reasonably split to smaller pieces. Convert the EDID loader to struct drm_edid. There's a functional change in validation; it no longer tries to fix errors or filter invalid blocks. It's stricter in this sense. Hopefully this will not be an issue. As a by-product, this change also allows HF-EEODB extended EDIDs to be passed via override/firmware EDID. Signed-off-by:
-
Jani Nikula authored
Follow the usual naming convention by file name. Signed-off-by:
-
Jani Nikula authored
Stop passing around something that's readily available in connector->name. Signed-off-by:
-
Jani Nikula authored
Having the EDID override debugfs directly update the EDID property is problematic. The update is partial only. The driver has no way of knowing it's been updated. Mode list is not updated. It's an inconsistent state. Detach debugfs EDID override from the property update completely. Only set and reset a separate override EDID copy from debugfs, and have it take effect only at detect (via EDID read). The copy is at connector->edid_override, protected by connector->edid_override_mutex. This also brings override EDID closer to firmware EDID in behaviour. Add validation of the override EDID which we completely lacked. Note that IGT already forces a detect whenever tests update the override EDID. v2: Add locking (Ville) Signed-off-by:
-
Jani Nikula authored
We've lacked a function for immutable validity check on drm_edid. Add one. Signed-off-by:
-
Jani Nikula authored
Split the drm_edid block count helper to a base version that reports the block count indicated by EDID contents, and another on top that limits the block count based on size allocated for the EDID. Signed-off-by:
-
Jani Nikula authored
Follow the naming of both EDID override functions as well as drm_edid_connector_update(). This also matches better what the function does; a combination of EDID property update and add modes. Indeed it should later be converted to call drm_edid_connector_update(). Signed-off-by:
-
Jani Nikula authored
Add a function to dump the override EDID in debugfs. This hides the override EDID management better in drm_edid.c. Signed-off-by:
-
Jani Nikula authored
It's useful debugging information to know if and when an override EDID was set or reset. Signed-off-by:
-
Jani Nikula authored
The connector->override_edid flag is strictly for EDID override debugfs management, and drivers have no business using it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/c901869ff8a4e3aebc4abec99c7dd7b4c224f6e6.1666614699.git.jani.nikula@intel.com
-
Jani Nikula authored
The connector->override_edid flag is strictly for EDID override debugfs management, and drivers have no business using it. The check for override_edid was added in commit 30190629 ("drm/i915: Ignore TMDS clock limit for DP++ when EDID override is set") to facilitate mode list cross-checking against modes in override EDID when the connector in question isn't even connected. The dual mode detect fallback would do VBT based limiting in this case. Instead of override EDID, check for connector forcing in the fallback. v2: Simply use !connector->force (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
For normal connector detect, there's really no point in trying dual mode detect if the connector is disconnected. We can simplify the detect sequence by skipping it. Since intel_hdmi_dp_dual_mode_detect() is only called when EDID is present, we can drop the has_edid parameter. The functional effect is speeding up disconnected connector detection ever so slightly, and, combined with firmware EDID, also stop logging about assuming dual mode adaptor. It's a bit subtle, but this will also skip dual mode detect if the connector is force connected and a) there's no EDID of any kind, normal or override/firmware or b) there's EDID but it does not indicate digital. These are corner cases no matter what, and arguably forcing should not be limited by dual mode detect. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 25 Oct, 2022 8 commits
-
-
Zack Rusin authored
Fixes a warning about extra docs about a function argument that has been removed a while back: drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3888: warning: Excess function parameter 'sync_file' description in 'vmw_execbuf_copy_fence_user' Fixes: a0f90c88 ("drm/vmwgfx: Fix stale file descriptors on failed usercopy") Signed-off-by:
Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-18-zack@kde.org
-
Zack Rusin authored
It's important to get the initial size of cotables right because otherwise every app needs to start with a synchronous cotable resize. This has an measurable impact on system wide performance but is not relevant for long running single full screen apps for which the cotable resizes will happen early in the lifecycle and will continue running just fine. To eliminate the initial cotable resizes match the initial sizes to what the userspace expects. The actual result of the patch is simply setting the initial size of two of the cotables to a size that will align them to two pages instead of one. For a piglit run, before: name | total | per frame | per sec vmw_cotable_resize | 1405 | 0.12 | 1.58 vmw_execbuf_ioctl | 290805 | 25.43 | 326.05 After: name | total | per frame | per sec vmw_cotable_resize | 4 | 0.00 | 0.00 vmw_execbuf_ioctl | 281673 | 25.10 | 274.68 Signed-off-by:
-
Zack Rusin authored
There's been a lot of cotable resizes on startup which we can track by adding a mks stat to measure both the invocation count and time spent doing cotable resizes. This is only used if kernel is configured with CONFIG_DRM_VMWGFX_MKSSTATS The stats are collected on the host size inside the vmware-stats.log file. Signed-off-by:
-
Zack Rusin authored
The explicit vblank handling was never finished. The driver never had the full implementation of vblank and what was there is emulated by DRM when the driver doesn't pretend to be implementing it itself. Let DRM handle the vblank emulation and stop pretending the driver is doing anything special with vblank. In the future it would make sense to implement helpers for full vblank handling because vkms and amdgpu_vkms already have that code. Exporting it to common helpers and having all three drivers share it would make sense (that would be largely just to allow more of igt to run). Signed-off-by:
-
Zack Rusin authored
Instead of using vmwgfx specific framebuffer implementation use the drm fb helpers. There's no change in functionality, the only difference is a reduction in the amount of code inside the vmwgfx module. drm fb helpers do not deal correctly with changes in crtc preferred mode at runtime, but the old fb code wasn't dealing with it either. Same situation applies to high-res fb consoles - the old code was limited to 1176x885 because it was checking for legacy/deprecated memory limites, the drm fb helpers are limited to the initial resolution set on fb due to first problem (drm fb helpers being unable to handle hotplug crtc preferred mode changes). This also removes the kernel config for disabling fb support which hasn't been used or supported in a very long time. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-14-zack@kde.org
-
Zack Rusin authored
Dumb buffers allow a very limited set of formats. Basically everything apart from 1, 2 and 4 is expected to return an error. Make vmwgfx follow those guidelines. This fixes igt's dumb_buffer invalid_bpp test on vmwgfx. Signed-off-by:
-
Maaz Mombasawala authored
The vmwgfx driver has migrated from using the hashtable in vmwgfx_hashtab to the linux/hashtable implementation. Remove the vmwgfx_hashtab from the driver. Signed-off-by:
-
Maaz Mombasawala authored
This is part of an effort to move from the vmwgfx_open_hash hashtable to linux/hashtable implementation. Refactor the ref_hash hashtable, used for fast lookup of reference objects associated with a ttm file. This also exposed a problem related to inconsistently using 32-bit and 64-bit keys with this hashtable. The hash function used changes depending on the size of the type, and results are not consistent across numbers, for example, hash_32(329) = 329, but hash_long(329) = 328. This would cause the lookup to fail for objects already in the hashtable, since keys of different sizes were being passed during adding and lookup. This was not an issue before because vmwgfx_open_hash always used hash_long. Fix this by always using 64-bit keys for this hashtable, which means that hash_long is always used. Signed-off-by:
-
