- 24 Jun, 2022 40 commits
-
-
Suravee Suthikulpanit authored
Introduce logic to (de)activate AVIC, which also allows switching between AVIC to x2AVIC mode at runtime. When an AVIC-enabled guest switches from APIC to x2APIC mode, the SVM driver needs to perform the following steps: 1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum APIC ID support for each mode accodingly. 2. Disable x2APIC MSRs interception in order to allow the hardware to virtualize x2APIC MSRs accesses. Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-12-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Maxim Levitsky authored
As a preparation for x2avic, this patch ensures that x2apic msrs are always intercepted for the nested guest. Reviewed-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220519102709.24125-11-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
AMD AVIC can support xAPIC and x2APIC virtualization, which requires changing x2APIC bit VMCB and MSR intercepton for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl() to refresh configuration accordingly. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-10-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
APICv should be deactivated on vCPU that has APIC disabled. Therefore, call kvm_vcpu_update_apicv() when changing APIC mode, and add additional check for APIC disable mode when determine APICV activation, Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-9-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
When enabling x2APIC virtualization (x2AVIC), the interception of x2APIC MSRs must be disabled to let the hardware virtualize guest MSR accesses. Current implementation keeps track of list of MSR interception state in the svm_direct_access_msrs array. Therefore, extends the array to include x2APIC MSRs. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-8-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
In X2APIC mode, the Logical Destination Register is read-only, which provides a fixed mapping between the logical and physical APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC and the processor uses the X2APIC ID in the backing page to create a vCPU’s logical ID. In addition, KVM does not support updating APIC ID in x2APIC mode, which means AVIC does not need to handle this case. Therefore, check x2APIC mode when handling physical and logical APIC ID update, and when invalidating logical APIC ID table. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-7-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
In x2APIC mode, ICRH contains 32-bit destination APIC ID. So, update the avic_kick_target_vcpus() accordingly. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-6-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
xAVIC and x2AVIC modes can support diffferent number of vcpus. Update existing logics to support each mode accordingly. Also, modify the maximum physical APIC ID for AVIC to 255 to reflect the actual value supported by the architecture. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-5-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
Add CPUID check for the x2APIC virtualization (x2AVIC) feature. If available, the SVM driver can support both AVIC and x2AVIC modes when load the kvm_amd driver with avic=1. The operating mode will be determined at runtime depending on the guest APIC mode. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-4-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
To signify that the macros only support 8-bit xAPIC destination ID. Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220519102709.24125-3-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
Introduce a new feature bit for virtualized x2APIC (x2AVIC) in CPUID_Fn8000000A_EDX [SVM Revision and Feature Identification]. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220519102709.24125-2-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vineeth Pillai authored
Add a new debugfs file to expose the pid of each vcpu threads. This is very helpful for userland tools to get the vcpu pids without worrying about thread naming conventions of the VMM. Signed-off-by:
Vineeth Pillai (Google) <vineeth@bitbyteword.org> Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Rely on try_cmpxchg64 for re-reading the PID on failure, using READ_ONCE only right before the first iteration. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Zeng Guang authored
Hardware would directly write x2APIC ICR register instead of software emulation in some circumstances, e.g when Intel IPI virtualization is enabled. This behavior requires normal reserved bits checking to ensure them input as zero, otherwise it will cause #GP. So we need mask out those reserved bits from the data written to vICR register. Remove Delivery Status bit emulation in test case as this flag is invalid and not needed in x2APIC mode. KVM may ignore clearing it during interrupt dispatch which will lead to fake test failure. Opportunistically correct vector number for test sending IPI to non-existent vCPUs. Signed-off-by:
Zeng Guang <guang.zeng@intel.com> Message-Id: <20220623094511.26066-1-guang.zeng@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch add a self test that verifies user space can inject UnCorrectable No Action required (UCNA) memory errors to the guest. It also verifies that incorrectly configured MSRs for Corrected Machine Check Interrupt (CMCI) emulation will result in #GP. Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-9-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch enables MCG_CMCI_P by default in kvm_mce_cap_supported. It reuses ioctl KVM_X86_SET_MCE to implement injection of UnCorrectable No Action required (UCNA) errors, signaled via Corrected Machine Check Interrupt (CMCI). Neither of the CMCI and UCNA emulations depends on hardware. Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-8-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch adds the emulation of IA32_MCi_CTL2 registers to KVM. A separate mci_ctl2_banks array is used to keep the existing mce_banks register layout intact. In Machine Check Architecture, in addition to MCG_CMCI_P, bit 30 of the per-bank register IA32_MCi_CTL2 controls whether Corrected Machine Check error reporting is enabled. Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-7-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch updates the allocation of mce_banks with the array allocation API (kcalloc) as a precedent for the later mci_ctl2_banks to implement per-bank control of Corrected Machine Check Interrupt (CMCI). Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-6-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch calculates the number of lvt entries as part of KVM_X86_MCE_SETUP conditioned on the presence of MCG_CMCI_P bit in MCG_CAP and stores result in kvm_lapic. It translats from APIC_LVTx register to index in lapic_lvt_entry enum. It extends the APIC_LVTx macro as well as other lapic write/reset handling etc to support Corrected Machine Check Interrupt. Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-5-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
An APIC_LVTx macro is introduced to calcualte the APIC_LVTx register offset based on the index in the lapic_lvt_entry enum. Later patches will extend the APIC_LVTx macro to support the APIC_LVTCMCI register in order to implement Corrected Machine Check Interrupt signaling. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-4-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
This patch defines a lapic_lvt_entry enum used as explicit indices to the apic_lvt_mask array. In later patches a LVT_CMCI will be added to implement the Corrected Machine Check Interrupt signaling. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-3-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jue Wang authored
Refactor APIC_VERSION so that the maximum number of LVT entries is inserted at runtime rather than compile time. This will be used in a subsequent commit to expose the LVT CMCI Register to VMs that support Corrected Machine Check error counting/signaling (IA32_MCG_CAP.MCG_CMCI_P=1). Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220610171134.772566-2-juew@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The TLB flush before installing the newly-populated lower level page table is unnecessary if the lower-level page table maps the huge page identically. KVM knows it is if it did not reuse an existing shadow page table, tell drop_large_spte() to skip the flush in that case. Extracted from a patch by David Matlack. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Add support for Eager Page Splitting pages that are mapped by nested MMUs. Walk through the rmap first splitting all 1GiB pages to 2MiB pages, and then splitting all 2MiB pages to 4KiB pages. Note, Eager Page Splitting is limited to nested MMUs as a policy rather than due to any technical reason (the sp->role.guest_mode check could just be deleted and Eager Page Splitting would work correctly for all shadow MMU pages). There is really no reason to support Eager Page Splitting for tdp_mmu=N, since such support will eventually be phased out, and there is no current use case supporting Eager Page Splitting on hosts where TDP is either disabled or unavailable in hardware. Furthermore, future improvements to nested MMU scalability may diverge the code from the legacy shadow paging implementation. These improvements will be simpler to make if Eager Page Splitting does not have to worry about legacy shadow paging. Splitting huge pages mapped by nested MMUs requires dealing with some extra complexity beyond that of the TDP MMU: (1) The shadow MMU has a limit on the number of shadow pages that are allowed to be allocated. So, as a policy, Eager Page Splitting refuses to split if there are KVM_MIN_FREE_MMU_PAGES or fewer pages available. (2) Splitting a huge page may end up re-using an existing lower level shadow page tables. This is unlike the TDP MMU which always allocates new shadow page tables when splitting. (3) When installing the lower level SPTEs, they must be added to the rmap which may require allocating additional pte_list_desc structs. Case (2) is especially interesting since it may require a TLB flush, unlike the TDP MMU which can fully split huge pages without any TLB flushes. Specifically, an existing lower level page table may point to even lower level page tables that are not fully populated, effectively unmapping a portion of the huge page, which requires a flush. As of this commit, a flush is always done always after dropping the huge page and before installing the lower level page table. This TLB flush could instead be delayed until the MMU lock is about to be dropped, which would batch flushes for multiple splits. However these flushes should be rare in practice (a huge page must be aliased in multiple SPTEs and have been split for NX Huge Pages in only some of them). Flushing immediately is simpler to plumb and also reduces the chances of tripping over a CPU bug (e.g. see iTLB multihit). [ This commit is based off of the original implementation of Eager Page Splitting from Peter in Google's kernel from 2016. ] Suggested-by:
Peter Feiner <pfeiner@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-23-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at declaration time rather than being fixed for all declarations. This will be used in a follow-up commit to declare an cache in x86 with a capacity of 512+ objects without having to increase the capacity of all caches in KVM. This change requires each cache now specify its capacity at runtime, since the cache struct itself no longer has a fixed capacity known at compile time. To protect against someone accidentally defining a kvm_mmu_memory_cache struct directly (without the extra storage), this commit includes a WARN_ON() in kvm_mmu_topup_memory_cache(). In order to support different capacities, this commit changes the objects pointer array to be dynamically allocated the first time the cache is topped-up. While here, opportunistically clean up the stack-allocated kvm_mmu_memory_cache structs in riscv and arm64 to use designated initializers. No functional change intended. Reviewed-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-22-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Before allocating a child shadow page table, all callers check whether the parent already points to a huge page and, if so, they drop that SPTE. This is done by drop_large_spte(). However, dropping the large SPTE is really only necessary before the sp is installed. While the sp is returned by kvm_mmu_get_child_sp(), installing it happens later in __link_shadow_page(). Move the call there instead of having it in each and every caller. To ensure that the shadow page is not linked twice if it was present, do _not_ opportunistically make kvm_mmu_get_child_sp() idempotent: instead, return an error value if the shadow page already existed. This is a bit more verbose, but clearer than NULL. Finally, now that the drop_large_spte() name is not taken anymore, remove the two underscores in front of __drop_large_spte(). Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Currently KVM only zaps collapsible 4KiB SPTEs in the shadow MMU. This is fine for now since KVM never creates intermediate huge pages during dirty logging. In other words, KVM always replaces 1GiB pages directly with 4KiB pages, so there is no reason to look for collapsible 2MiB pages. However, this will stop being true once the shadow MMU participates in eager page splitting. During eager page splitting, each 1GiB is first split into 2MiB pages and then those are split into 4KiB pages. The intermediate 2MiB pages may be left behind if an error condition causes eager page splitting to bail early. No functional change intended. Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-20-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Currently make_huge_page_split_spte() assumes execute permissions can be granted to any 4K SPTE when splitting huge pages. This is true for the TDP MMU but is not necessarily true for the shadow MMU, since KVM may be shadowing a non-executable huge page. To fix this, pass in the role of the child shadow page where the huge page will be split and derive the execution permission from that. This is correct because huge pages are always split with direct shadow page and thus the shadow page role contains the correct access permissions. No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-19-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Splitting huge pages requires allocating/finding shadow pages to replace the huge page. Shadow pages are keyed, in part, off the guest access permissions they are shadowing. For fully direct MMUs, there is no shadowing so the access bits in the shadow page role are always ACC_ALL. But during shadow paging, the guest can enforce whatever access permissions it wants. In particular, eager page splitting needs to know the permissions to use for the subpages, but KVM cannot retrieve them from the guest page tables because eager page splitting does not have a vCPU. Fortunately, the guest access permissions are easy to cache whenever page faults or FNAME(sync_page) update the shadow page tables; this is an extension of the existing cache of the shadowed GFNs in the gfns array of the shadow page. The access bits only take up 3 bits, which leaves 61 bits left over for gfns, which is more than enough. Now that the gfns array caches more information than just GFNs, rename it to shadowed_translation. While here, preemptively fix up the WARN_ON() that detects gfn mismatches in direct SPs. The WARN_ON() was paired with a pr_err_ratelimited(), which means that users could sometimes see the WARN without the accompanying error message. Fix this by outputting the error message as part of the WARN splat, and opportunistically make them WARN_ONCE() because if these ever fire, they are all but guaranteed to fire a lot and will bring down the kernel. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-18-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Update the page stats in __rmap_add() rather than at the call site. This will avoid having to manually update page stats when splitting huge pages in a subsequent commit. No functional change intended. Reviewed-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-17-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Allow adding new entries to the rmap and linking shadow pages without a struct kvm_vcpu pointer by moving the implementation of rmap_add() and link_shadow_page() into inner helper functions. No functional change intended. Reviewed-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-16-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Constify rmap_add()'s @slot parameter; it is simply passed on to gfn_to_rmap(), which takes a const memslot. No functional change intended. Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-15-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Allow @vcpu to be NULL in kvm_mmu_find_shadow_page() (and its only caller __kvm_mmu_get_shadow_page()). @vcpu is only required to sync indirect shadow pages, so it's safe to pass in NULL when looking up direct shadow pages. This will be used for doing eager page splitting, which allocates direct shadow pages from the context of a VM ioctl without access to a vCPU pointer. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-14-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Get the kvm pointer from the caller, rather than deriving it from vcpu->kvm, and plumb the kvm pointer all the way from kvm_mmu_get_shadow_page(). With this change in place, the vcpu pointer is only needed to sync indirect shadow pages. In other words, __kvm_mmu_get_shadow_page() can now be used to get *direct* shadow pages without a vcpu pointer. This enables eager page splitting, which needs to allocate direct shadow pages during VM ioctls. No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-13-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
The vcpu pointer in kvm_mmu_alloc_shadow_page() is only used to get the kvm pointer. So drop the vcpu pointer and just pass in the kvm pointer. No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-12-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Refactor kvm_mmu_alloc_shadow_page() to receive the caches from which it will allocate the various pieces of memory for shadow pages as a parameter, rather than deriving them from the vcpu pointer. This will be useful in a future commit where shadow pages are allocated during VM ioctls for eager page splitting, and thus will use a different set of caches. Preemptively pull the caches out all the way to kvm_mmu_get_shadow_page() since eager page splitting will not be calling kvm_mmu_alloc_shadow_page() directly. No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-11-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Move the code that write-protects newly-shadowed guest page tables into account_shadowed(). This avoids a extra gfn-to-memslot lookup and is a more logical place for this code to live. But most importantly, this reduces kvm_mmu_alloc_shadow_page()'s reliance on having a struct kvm_vcpu pointer, which will be necessary when creating new shadow pages during VM ioctls for eager page splitting. Note, it is safe to drop the role.level == PG_LEVEL_4K check since account_shadowed() returns early if role.level > PG_LEVEL_4K. No functional change intended. Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-10-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Rename 2 functions: kvm_mmu_get_page() -> kvm_mmu_get_shadow_page() kvm_mmu_free_page() -> kvm_mmu_free_shadow_page() This change makes it clear that these functions deal with shadow pages rather than struct pages. It also aligns these functions with the naming scheme for kvm_mmu_find_shadow_page() and kvm_mmu_alloc_shadow_page(). Prefer "shadow_page" over the shorter "sp" since these are core functions and the line lengths aren't terrible. No functional change intended. Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-9-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Consolidate kvm_mmu_alloc_page() and kvm_mmu_alloc_shadow_page() under the latter so that all shadow page allocation and initialization happens in one place. No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-8-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Decompose kvm_mmu_get_page() into separate helper functions to increase readability and prepare for allocating shadow pages without a vcpu pointer. Specifically, pull the guts of kvm_mmu_get_page() into 2 helper functions: kvm_mmu_find_shadow_page() - Walks the page hash checking for any existing mmu pages that match the given gfn and role. kvm_mmu_alloc_shadow_page() Allocates and initializes an entirely new kvm_mmu_page. This currently requries a vcpu pointer for allocation and looking up the memslot but that will be removed in a future commit. No functional change intended. Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220516232138.1783324-7-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-