- 21 Nov, 2022 25 commits
-
-
David S. Miller authored
netdev.vger.kernel.org archive mirror Steen Hegelund says: ==================== net: Add support for VCAP debugFS in Sparx5 This provides support for getting VCAP instance, VCAP rule and VCAP port keyset configuration information via the debug file system. It builds on top of the initial IS2 VCAP support found in these series: https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221111130519.1459549-1-steen.hegelund@microchip.com/ Functionality: ============== The VCAP API exposes a /sys/kernel/debug/sparx5/vcaps folder containing the following entries: - raw_<vcap>_<instance> This is a raw dump of the VCAP instance with a line for each available VCAP rule. This information is limited to the VCAP rule address, the rule size and the rule keyset name as this requires very little information from the VCAP cache. This can be used to detect if a valid rule is stored at the correct address. - <vcap>_<instance> This dumps the VCAP instance configuration: address ranges, chain id ranges, word size of keys and actions etc, and for each VCAP rule the details of keys (values and masks) and actions are shown. This is useful when discovering if the expected rule is present and in which order it will be matched. - <interface> This shows the keyset configuration per lookup and traffic type and the set of sticky bits (common for all interfaces). This is cleared when shown, so it is possible to sample over a period of time. It also shows if this port/lookup is enabled for matching in the VCAP. This can be used to find out which keyset the traffic being sent to a port, will be matched against, and if such traffic has been seen by one of the ports. Delivery: ========= This is current plan for delivering the full VCAP feature set of Sparx5: - TC protocol all support for IS2 VCAP - Sparx5 IS0 VCAP support - TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support Version History: ================ v2 Removed a 'support' folder (used for integration testing) that had been added in patch 6/8 by a mistake. Wrapped long lines. v1 Initial version ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This tests the functionality of the debugFS support: - finding valid keyset on an address - raw VCAP output - full rule VCAP output Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
-
Steen Hegelund authored
This ensures that the VCAP cache and the lists maintained in the VCAP instance is protected when accessed by different clients. Signed-off-by:
-
Steen Hegelund authored
This add support for displaying the keys and actions in a rule. The keys and action display format will be determined by the size and the type of the key or action. The longer keys will typically be displayed as a hexadecimal byte array. The actionset is not decoded in full as the Sparx5 IS2 only has one supported action, so this will be added later with other VCAP types. Signed-off-by:
-
Steen Hegelund authored
This add support to show all rules in a VCAP instance. The information shown is: - rule id - address range - size - chain id - keyset name, subword size, register span - actionset name, subword size, register span - counter value - sticky bit (one bit width counter) Signed-off-by:
-
Steen Hegelund authored
This adds support for decoding VCAP rules with a minimum number of attributes: address, rule size and keyset. This allows for a quick inspection of a VCAP instance to determine if the rule are present and in the correct order. Signed-off-by:
-
Steen Hegelund authored
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with the VCAP instances and the ports Signed-off-by:
-
Steen Hegelund authored
This ensures that the last_used_addr in a VCAP instance is returned to the default value when all rules have been deleted. Signed-off-by:
-
Steen Hegelund authored
This ensures that the l3_proto always have a valid value and that any dissector parsing errors causes the flower rule to be discarded. Signed-off-by:
-
David S. Miller authored
Jeroen de Borst says: ==================== gve: Handle alternate miss-completions Some versions of the virtual NIC present miss-completions in an alternative way. Let the diver handle these alternate completions and announce this capability to the device. The capability is announced uing a new AdminQ command that sends driver information to the device. The device can refuse a driver if it is lacking support for a capability, or it can adopt it's behavior to work around OS specific issues. Changed in v5: - Removed comments in fucntion calls - Switched ENOTSUPP back to EOPNOTSUPP and made sure it gets passed Changed in v4: - Clarified new AdminQ command in cover letter - Changed EOPNOTSUPP to ENOTSUPP to match device's response Changed in v3: - Rewording cover letter - Added 'Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>' Changes in v2: - Changed the subject to include 'gve:' ==================== Signed-off-by: -
Jeroen de Borst authored
The virtual NIC has 2 ways of indicating a miss-path completion. This handles the alternate. Signed-off-by:
Jeroen de Borst <jeroendb@google.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Jeroen de Borst authored
Check whether the driver is compatible with the device presented. Signed-off-by:
-
Dmitry Vyukov authored
Extend the test to check the scenario when NCI core tries to send data to already closed device to ensure that nothing bad happens. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Andy Chiu says: ==================== net: axienet: Use a DT property to configure frequency of the MDIO bus Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5 MHz. Thus, we use a DT property, which is "clock-frequency", to work with it at boot time. The default 2.5 MHz would be set if the property is not pressent. Also, factor out mdio enable/disable functions due to the api change since 253761a0. Changelog: --- v5 --- 1. Make dt-binding patch prior to the implementation patch. 2. Disable mdio bus in error path. 3. Update description of some functions. --- v4 --- 1. change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ as suggested by Andrew. --- v3 RESEND --- 1. Repost the exact same patch again --- v3 --- 1. Fix coding style, and make probing of the driver fail if MDC overflow --- v2 --- 1. Use clock-frequency, as defined in mdio.yaml, to configure MDIO clock. 2. Only print out frequency if it is set to a non-standard value. 3. Reduce the scope of axienet_mdio_enable and remove axienet_mdio_disable because no one really uses it anymore. ==================== Signed-off-by:
-
Andy Chiu authored
Some FPGA platforms have 80KHz MDIO bus frequency constraint when connecting Ethernet to its on-board external Marvell PHY. Thus, we may have to set MDIO clock according to the DT. Otherwise, use the default 2.5 MHz, as specified by 802.3, if the entry is not present. Also, change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ because we may actually set MDIO bus frequency higher than 2.5MHz if undelying devices support it. And properly disable the mdio bus clock in error path. Signed-off-by:
Andy Chiu <andy.chiu@sifive.com> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andy Chiu authored
mdio bus frequency is going to be configurable at boottime by a property in DT now, so add a description to it. Signed-off-by:
Greentime Hu <greentime.hu@sifive.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Andy Chiu authored
Both axienet_mdio_{enable/disable} functions are no longer used in xilinx_axienet_main.c due to 253761a0. And axienet_mdio_disable is not even used in the mdio.c. So unexport and remove them. Signed-off-by: -
Dan Carpenter authored
Smatch complains that: drivers/net/ethernet/microchip/sparx5/sparx5_dcb.c:112 sparx5_dcb_apptrust_validate() error: uninitialized symbol 'match'. This would only happen if the: if (sparx5_dcb_apptrust_policies[i].nselectors != nselectors) condition is always true (they are not equal). The "nselectors" variable comes from dcbnl_ieee_set() and it is a number between 0-256. This seems like a probably a real bug. Fixes: 23f8382c ("net: microchip: sparx5: add support for apptrust") Signed-off-by:Dan Carpenter <error27@gmail.com> Reviewed-by:
Daniel Machon <daniel.machon@microchip.com> Signed-off-by:
-
Lorenzo Bianconi authored
Fix RSTCTRL_PPE0 and RSTCTRL_PPE1 register mask definitions for MTK_NETSYS_V2. Remove duplicated definitions. Fixes: 160d3a9b ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Horatiu Vultur authored
When VCAP_KUNIT_TEST is enabled the following warnings are generated: drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:257:34: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:258:41: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:342:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:359:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1327:34: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1328:41: warning: Using plain integer as NULL pointer Therefore fix this. Fixes: dccc30cc ("net: microchip: sparx5: Add KUNIT test of counters and sorted rules") Fixes: c956b9b3 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Fixes: 67d63751 ("net: microchip: sparx5: Adding KUNIT test for the VCAP API") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: IPsec offload support Huanhuan Wang says: this series adds support for IPsec offload to the NFP driver. It covers three enhancements: 1. Patches 1/3: - Extend the capability word and control word to to support new features. 2. Patch 2/3: - Add framework to support IPsec offloading for NFP driver, but IPsec offload control plane interface xfrm callbacks which interact with upper layer are not implemented in this patch. 3. Patch 3/3: - IPsec control plane interface xfrm callbacks are implemented in this patch. Changes since v3 * Remove structure fields that describe firmware but are not used for Kernel offload * Add WARN_ON(!xa_empty()) before call to xa_destroy() * Added helpers for hash methods Changes since v2 * OFFLOAD_HANDLE_ERROR macro and the associated code removed * Unnecessary logging removed * Hook function xdo_dev_state_free in struct xfrmdev_ops removed * Use Xarray to maintain SA entries Changes since v1 * Explicitly return failure when XFRM_STATE_ESN is set * Fix the issue that AEAD algorithm is not correctly offloaded ==================== Signed-off-by: -
Huanhuan Wang authored
Xfrm callbacks are implemented to offload SA info into firmware by mailbox. It supports 16K SA info in total. Expose ipsec offload feature to upper layer, this feature will signal the availability of the offload. Based on initial work of Norm Bagley <norman.bagley@netronome.com>. Signed-off-by:
Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Huanhuan Wang authored
A new metadata type and config structure are introduced to interact with firmware to support ipsec offloading. This feature relies on specific firmware that supports ipsec encrypt/decrypt by advertising related capability bit. The xfrm callbacks which interact with upper layer are implemented in the following patch. Based on initial work of Norm Bagley <norman.bagley@netronome.com>. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Yinjun Zhang authored
Currently the 32-bit capability word is almost exhausted, now allocate some more words to support new features, and control word is also extended accordingly. Packet-type offloading is implemented in NIC application firmware, but it's not used in kernel driver, so reserve this bit here in case it's redefined for other use. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by:
-
Gustavo A. R. Silva authored
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 227 warnings like these: drivers/net/ethernet/brocade/bna/bna_enet.c:519:3: warning: cast from 'void (*)(struct bna_ethport *, enum bna_ethport_event)' to 'bfa_fsm_t' (aka 'void (*)(void *, int)') converts to incompatible function type [-Wcast-function-type-strict] bfa_fsm_set_state(ethport, bna_ethport_sm_down); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bna state machine code heavily overloads its state machine functions, so these have been separated into their own sets of structs, enums, typedefs, and helper functions. There are almost zero binary code changes, all seem to be related to header file line numbers changing, or the addition of the new stats helper. Important to mention is that while I was manually implementing this changes I was staring at this[2] patch from Kees Cook. Thanks, Kees. :) Link: https://github.com/KSPP/linux/issues/240 [1] https://reviews.llvm.org/D134831 [2] https://lore.kernel.org/linux-hardening/20220929230334.2109344-1-keescook@chromium.org/Reviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
- 19 Nov, 2022 8 commits
-
-
Felix Fietkau authored
Keeps traffic sent to the switch within link speed limits Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-7-nbd@nbd.nameSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Keeps traffic sent to the switch within link speed limits Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221116080734.44013-6-nbd@nbd.nameSigned-off-by:
-
Felix Fietkau authored
When sending traffic to multiple ports with different link speeds, queued packets to one port can drown out tx to other ports. In order to better handle transmission to multiple ports, use the hardware shaper feature to implement weighted fair queueing between ports. Weight and maximum rate are automatically adjusted based on the link speed of the port. The first 3 queues are unrestricted and reserved for non-DSA direct tx on GMAC ports. The following queues are automatically assigned by the MTK DSA tag driver based on the target port number. The PPE offload code configures the queues for offloaded traffic in the same way. This feature is only supported on devices supporting QDMA. All queues still share the same DMA ring and descriptor pool. Signed-off-by:
-
Felix Fietkau authored
On newer chips, this field is unused and contains some bits related to queue assignment. Initialize it to 0 in those cases. Fix offload_version on MT7621 and MT7623, which still need the previous value. Signed-off-by:
-
Felix Fietkau authored
Improves handling of DMA ring overflow. Clarify other WDMA drop related comment. Signed-off-by:
-
Felix Fietkau authored
In order to use the hardware traffic shaper feature, a larger tx ring is needed, especially for the scratch ring, which the hardware shaper uses to reorder packets. Signed-off-by:
-
Lukas Bulwahn authored
Commit a7c2a32e ("net: fman: memac: Use lynx pcs driver") makes the Freescale Data-Path Acceleration Architecture Frame Manager use lynx pcs driver by selecting PCS_LYNX. It also selects the non-existing config PCS as well, which has no effect. Remove this select to a non-existing config. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20221116102450.13928-1-lukas.bulwahn@gmail.comSigned-off-by:
-
Jakub Kicinski authored
I've added a flex array to struct nlmsghdr in commit 738136a0 ("netlink: split up copies in the ack construction") to allow accessing the data easily. It leads to warnings with clang, if user space wraps this structure into another struct and the flex array is not at the end of the container. Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/all/20221114023927.GA685@u2004-local/ Link: https://lore.kernel.org/r/20221118033903.1651026-1-kuba@kernel.orgSigned-off-by:
-
- 18 Nov, 2022 7 commits
-
-
Schspa Shi authored
The caller of del_timer_sync must prevent restarting of the timer, If we have no this synchronization, there is a small probability that the cancellation will not be successful. And syzbot report the fellowing crash: ================================================================== BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256 Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008- ge01d50cb #0 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395 kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320 do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749 do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367 el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627 call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4 kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not restart. Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com Signed-off-by:
Schspa Shi <schspa@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix oops and missing config conditionals The patches that were pulled into net-next previously[1] had some issues that this patchset fixes: (1) Fix missing IPV6 config conditionals. (2) Fix an oops caused by calling udpv6_sendmsg() directly on an AF_INET socket. (3) Fix the validation of network addresses on entry to socket functions so that we don't allow an AF_INET6 address if we've selected an AF_INET transport socket. Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/ [1] ==================== Signed-off-by: -
Eric Dumazet authored
Dan reported a new warning after my recent patch: New smatch warnings: net/core/dev.c:6409 napi_disable() error: uninitialized symbol 'new'. Indeed, we must first wait for STATE_SCHED and STATE_NPSVC to be cleared, to make sure @new variable has been initialized properly. Fixes: 4ffa1d1c ("net: adopt try_cmpxchg() in napi_{enable|disable}()") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dan Carpenter authored
The "pkt" was supposed to have been deleted in a previous patch. It leads to an uninitialized variable bug. Fixes: 72f0c6fb ("rxrpc: Allocate ACK records at proposal and queue for transmission") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Dan Carpenter authored
The error handling for if skb_copy_bits() fails was accidentally deleted so the rxkad_decrypt_ticket() function is not called. Fixes: 5d7edbc9 ("rxrpc: Get rid of the Rx ring") Signed-off-by:
-
Lorenzo Bianconi authored
Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is set only in mtk_pending_work() and it runs holding rtnl lock Signed-off-by:
-
Lorenzo Bianconi authored
Restore user configured MTU running mtk_hw_init() during tx timeout routine since it will be overwritten after a hw reset. Reported-by:
-
