When FADV_DONTNEED cannot drop all pages in the range, it observes that
some pages might still be on per-cpu LRU caches after recent
instantiation and so initiates remote calls to all CPUs to flush their
local caches.  However, in most cases, the fadvise happens from the same
context that instantiated the pages, and any pre-LRU pages in the
specified range are most likely sitting on the local CPU's LRU cache,
and so in many cases this results in unnecessary remote calls, which, in
a loaded system, can hold up the fadvise() call significantly.

[ I didn't record it in the extreme case we observed at Facebook,
  unfortunately. We had a slow-to-respond system and noticed it
  lru_add_drain_all() leading the profile during fadvise calls. This
  patch came out of thinking about the code and how we commonly call
  FADV_DONTNEED.

  FWIW, I wrote a silly directory tree walker/searcher that recurses
  through /usr to read and FADV_DONTNEED each file it finds. On a 2
  socket 40 ht machine, over 1% is spent in lru_add_drain_all(). With
  the patch, that cost is gone; the local drain cost shows at 0.09%. ]

Try to avoid the remote call by flushing the local LRU cache before even
attempting to invalidate anything.  It's a cheap operation, and the
local LRU cache is the most likely to hold any pre-LRU pages in the
specified fadvise range.

Link: http://lkml.kernel.org/r/20161214210017.GA1465@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For remote attestion it is important for the ima measurement values to
be platform-independent.  Therefore integer fields to be hashed must be
converted to canonical format.

Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Andreas Steffen <andreas.steffen@strongswan.org>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The IMA binary_runtime_measurements list is currently in platform native
format.

To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format.  For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.

Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.

Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The configured IMA measurement list template format can be replaced at
runtime on the boot command line, including a custom template format.
This patch adds support for restoring a measuremement list containing
multiple builtin/custom template formats.

Link: http://lkml.kernel.org/r/1480554346-29071-9-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The builtin and single custom templates are currently stored in an
array.  In preparation for being able to restore a measurement list
containing multiple builtin/custom templates, this patch stores the
builtin and custom templates as a linked list.  This will permit
defining more than one custom template per boot.

Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The TPM PCRs are only reset on a hard reboot.  In order to validate a
TPM's quote after a soft reboot (eg.  kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot.

This patch uses the kexec buffer passing mechanism to pass the
serialized IMA binary_runtime_measurements to the next kernel.

Link: http://lkml.kernel.org/r/1480554346-29071-7-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.

This is the architecture-specific part of setting up the IMA kexec
buffer for the next kernel.  It will be used in the next patch.

Link: http://lkml.kernel.org/r/1480554346-29071-6-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In preparation for serializing the binary_runtime_measurements, this
patch maintains the amount of memory required.

Link: http://lkml.kernel.org/r/1480554346-29071-5-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Measurements carried across kexec need to be added to the IMA
measurement list, but should not prevent measurements of the newly
booted kernel from being added to the measurement list.  This patch adds
support for allowing duplicate measurements.

The "boot_aggregate" measurement entry is the delimiter between soft
boots.

Link: http://lkml.kernel.org/r/1480554346-29071-4-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The TPM PCRs are only reset on a hard reboot.  In order to validate a
TPM's quote after a soft reboot (eg.  kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot.  This
patch restores the measurement list.

Link: http://lkml.kernel.org/r/1480554346-29071-3-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "ima: carry the measurement list across kexec", v8.

The TPM PCRs are only reset on a hard reboot.  In order to validate a
TPM's quote after a soft reboot (eg.  kexec -e), the IMA measurement
list of the running kernel must be saved and then restored on the
subsequent boot, possibly of a different architecture.

The existing securityfs binary_runtime_measurements file conveniently
provides a serialized format of the IMA measurement list.  This patch
set serializes the measurement list in this format and restores it.

Up to now, the binary_runtime_measurements was defined as architecture
native format.  The assumption being that userspace could and would
handle any architecture conversions.  With the ability of carrying the
measurement list across kexec, possibly from one architecture to a
different one, the per boot architecture information is lost and with it
the ability of recalculating the template digest hash.  To resolve this
problem, without breaking the existing ABI, this patch set introduces
the boot command line option "ima_canonical_fmt", which is arbitrarily
defined as little endian.

The need for this boot command line option will be limited to the
existing version 1 format of the binary_runtime_measurements.
Subsequent formats will be defined as canonical format (eg.  TPM 2.0
support for larger digests).

A simplified method of Thiago Bauermann's "kexec buffer handover" patch
series for carrying the IMA measurement list across kexec is included in
this patch set.  The simplified method requires all file measurements be
taken prior to executing the kexec load, as subsequent measurements will
not be carried across the kexec and restored.

This patch (of 10):

The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
The second kernel can check whether the previous kernel sent the buffer
and retrieve it.

This is the architecture-specific part which enables IMA to receive the
measurement list passed by the previous kernel.  It will be used in the
next patch.

The change in machine_kexec_64.c is to factor out the logic of removing
an FDT memory reservation so that it can be used by remove_ima_buffer.

Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull quota, fsnotify and ext2 updates from Jan Kara:
 "Changes to locking of some quota operations from dedicated quota mutex
  to s_umount semaphore, a fsnotify fix and a simple ext2 fix"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix bogus warning in dquot_disable()
  fsnotify: Fix possible use-after-free in inode iteration on umount
  ext2: reject inodes with negative size
  quota: Remove dqonoff_mutex
  ocfs2: Use s_umount for quota recovery protection
  quota: Remove dqonoff_mutex from dquot_scan_active()
  ocfs2: Protect periodic quota syncing with s_umount semaphore
  quota: Use s_umount protection for quota operations
  quota: Hold s_umount in exclusive mode when enabling / disabling quotas
  fs: Provide function to get superblock with exclusive s_umount

Pull KVM fixes from Paolo Bonzini:
 "Early fixes for x86.

  Instead of the (botched) revert, the lockdep/might_sleep splat has a
  real fix provided by Andrea"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
  kvm: take srcu lock around kvm_steal_time_set_preempted()
  kvm: fix schedule in atomic in kvm_steal_time_set_preempted()
  KVM: hyperv: fix locking of struct kvm_hv fields
  KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest.
  kvm: nVMX: Correct a VMX instruction error code for VMPTRLD

Pull dmi fix from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi_scan: Always show system identification string

Pull MFD updates from Lee Jones:
 "New Device Support
   - Add support for Ricoh RC5T619 PMIC to rn5t618
   - Add support for PM8821 PMIC to qcom-pm8xxx

  New Functionality:
   - Add support for GPIO to lpc_ich
   - Add support for GPADC to sun4i
   - Add ability for rk808 to shutdown

  Fix-ups:
   - Simplify/strip unnecessary code; tps65218, palmas, tps65217
   - Device Tree binding updates; tps65218, altera-a10sr
   - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic,
     fsl-imx25-tsadc, intel_soc_pmic_bxtwc
   - Use MFD API instead of of_platform_populate(); tps65218
   - Generalise name-space; pm8xxx
   - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x
   - Enable compile testing; max77620, max77686, exynos-lpass,
     abx500-core
   - Coding style issues; wm8994-core, wm5102-tables
   - Supply endian support; syscon
   - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc,
     abx500-core

  Bug Fixes:
   - Fix ordering issues; wm8994
   - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc
   - Fix compiler warnings; sun4i-gpadc
   - Fix leaks; mfd-core
   - Fix page fault during module unload; tps65217"

* tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: tps65217: Support an interrupt pin as the system wakeup
  mfd: tps65217: Make an interrupt handler simpler
  mfd: tps65217: Update register interrupt mask bits instead of writing operation
  mfd: tps65217: Specify the IRQ name
  mfd: tps65217: Fix page fault on unloading modules
  mfd: palmas: Remove redundant check in palmas_power_off
  mfd: arizona: Disable IRQs during driver remove
  mfd: pm8xxx: add support to pm8821
  mfd: intel-lpss: Try to enable Memory-Write-Invalidate
  mfd: rn5t618: Add Ricoh RC5T619 PMIC support
  mfd: axp20x: Add address extension registers for AXP806 regmap
  mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE()
  mfd: core: Fix device reference leak in mfd_clone_cell
  mfd: bcm590xx: Simplify a test
  mfd: sun4i-gpadc: Select regmap-irq
  mfd: abx500-core: drop unused MODULE_ tags from non-modular code
  mfd: ab8500: make sysctrl explicitly non-modular
  mfd: ab8500-gpadc: Make it explicitly non-modular
  mfd: ab8500-debugfs: Make it explicitly non-modular
  mfd: ab8500-core: Make it explicitly non-modular
  ...

When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_memslots() will be called by kvm_write_guest_offset_cached() so
take the srcu lock.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_steal_time_set_preempted() isn't disabling the pagefaults before
calling __copy_to_user and the kernel debug notices.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dquot_disable() was warning when sb_has_quota_loaded() was true when
invalidating page cache for quota files. The thinking behind this
warning was that we must have raced with somebody else turning quotas on
and this should not happen because all places modifying quota state must
hold s_umount exclusively now. However sb_has_quota_loaded() can be also
true at this point when we are just suspending quotas on remount
read-only. Just restore the behavior to situation before commit
c3b00446 ("quota: Remove dqonoff_mutex") which introduced the
warning.

The code in dquot_disable() can be further simplified with the new
locking of quota state changes however let's leave that to a separate
commit that can get more testing exposure.

Fixes: c3b00446Signed-off-by: Jan Kara <jack@suse.cz>

Let's keep consistent when print dmi_ids_string between SMBIOS 2.x
and SMBIOS 3.x, and always show the system identification string,
like Vendor, Product/Board name and BIOS infos.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull RTC updates from Alexandre Belloni:
  "Subsystem:
   - non-modular drivers are now explicitly non-modular

  New driver:
    - Epson Toyocom rtc-7301sf/dg

  Drivers:
   - cmos: reject unsupported alarm values wrt the RTC capabilities
   - ds1307: ACPI support
   - jz4740: DT support, jz4780 handling, can now be used as a system
     power controller
   - mcp795: many fixes, in particular proper month handling
   - twl: driver is now DT only"

* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: mcp795: Fix whitespace and indentation.
  rtc: mcp795: Prefer using the BIT() macro.
  rtc: mcp795: fix month write resetting date to 1.
  rtc: mcp795: fix time range difference between linux and RTC chip.
  rtc: mcp795: fix bitmask value for leap year (LP).
  rtc: mcp795: use bcd2bin/bin2bcd.
  rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
  rtc: ds1307: Add ACPI support
  rtc: imxdi: (trivial) fix a typo
  rtc: ds1374: Merge conditional + WARN_ON()
  rtc: twl: make driver DT only
  rtc: twl: kill static variables
  rtc: fix typos in Kconfig
  rtc: jz4740: make the driver builtin only
  rtc: jz4740: remove unused EXPORT_SYMBOL
  Documentation: bindings: fix twl-rtc documentation
  rtc: Enable compile testing for Maxim and Samsung drivers
  MIPS: jz4740: Remove obsolete code
  MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
  MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
  ...

Fix whitespace and indentation errors and the following
checkpatch warnings:
- line 15: Block comments use a trailing */ on a separate line
- line 256: Line over 80 characters
No code change.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch doesn't change the code but replaces all bitmask values
with the BIT(x) macro.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According to Microchip errata some combinations of date and month
values may result in the date being reset to 1, even if the date
is also written with the month (for example 31-07 or 31-08).
As a workaround avoid writing date and month values within the same
Write command. Instead, terminate the Write command after loading
the date and begin a new command to write the month. In addition,
disable the oscillator before loading the new values. This is done
by ensuring both the ST and EXTOSC bits are cleared and waiting for
the OSCON bit to clear.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG,
month range is 1~12. This patch adjusts difference of them.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According the datasheet the leap year is a fifth bit in month register.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions.
This change fixes the wrong conversion of month value
from binary to BCD (missing right shift operation for 10 month).
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch enables ACPI support for rtc-ds1307 driver.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Pull libnvdimm updates from Dan Williams:
 "The libnvdimm pull request is relatively small this time around due to
  some development topics being deferred to 4.11.

  As for this pull request the bulk of it has been in -next for several
  releases leading to one late fix being added (commit 868f036f
  ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It
  has received a build success notification from the 0day-kbuild robot
  and passes the latest libnvdimm unit tests.

  Summary:

   - Dynamic label support: To date namespace label support has been
     limited to disambiguating cases where PMEM (direct load/store) and
     BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since
     4.9 added support for multiple namespaces per PMEM-region there is
     value to support namespace labels even in the non-aliasing case.
     The presence of a valid namespace index block force-enables label
     support when the kernel would otherwise rely on region boundaries,
     and permits the region to be sub-divided.

   - Handle media errors in namespace metadata: Complement the error
     handling for media errors in namespace data areas with support for
     clearing errors on writes, and downgrading potential machine-check
     exceptions to simple i/o errors on read.

   - Device-DAX region attributes: Add 'align', 'id', and 'size' as
     attributes for device-dax regions. In particular this enables
     userspace tooling to generically size memory mapping and i/o
     operations. Prevent userspace from growing assumptions /
     dependencies about the parent device topology for a dax region. A
     libnvdimm namespace may not always be the parent device of a dax
     region.

   - Various cleanups and small fixes"

* tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: add region 'id', 'size', and 'align' attributes
  libnvdimm: fix mishandled nvdimm_clear_poison() return value
  libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held
  libnvdimm, pfn: fix align attribute
  libnvdimm, e820: use module_platform_driver
  libnvdimm, namespace: use octal for permissions
  libnvdimm, namespace: avoid multiple sector calculations
  libnvdimm: remove else after return in nsio_rw_bytes()
  libnvdimm, namespace: fix the type of name variable
  libnvdimm: use consistent naming for request_mem_region()
  nvdimm: use the right length of "pmem"
  libnvdimm: check and clear poison before writing to pmem
  tools/testing/nvdimm: dynamic label support
  libnvdimm: allow a platform to force enable label support
  libnvdimm: use generic iostat interfaces

Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Move and add registration for the mlx-platform driver. Introduce
  button and lid drivers for the surface3 (different from the
  surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
  ideapad-laptop quirk.

  Summary:

  ideapad-laptop:
   - Add Y700 15-ACZ to no_hw_rfkill DMI list

  surface3_button:
   - Introduce button support for the Surface 3

  surface3-wmi:
   - Add custom surface3 platform device for controlling LID
   - Balance locking on error path

  mlx-platform:
   - Add mlxcpld-hotplug driver registration
   - Fix semicolon.cocci warnings
   - Move module from arch/x86

  platform/x86:
   - Add Whiskey Cove PMIC TMU support"

* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: surface3-wmi: Balance locking on error path
  platform/x86: Add Whiskey Cove PMIC TMU support
  platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
  platform/x86: Introduce button support for the Surface 3
  platform/x86: Add custom surface3 platform device for controlling LID
  platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
  platform/x86: mlx-platform: Fix semicolon.cocci warnings
  platform/x86: mlx-platform: Move module from arch/x86

There is a possibility that lock will be left acquired.
Consolidate error path under out_free_unlock label.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds TMU (Time Management Unit) support for Intel BXT platform.
It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
PMIC.
Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[andy: resolve merge conflict in Kconfig]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull timer updates from Thomas Gleixner:
 "This is the last functional update from the tip tree for 4.10. It got
  delayed due to a newly reported and anlyzed variant of BIOS bug and
  the resulting wreckage:

   - Seperation of TSC being marked realiable and the fact that the
     platform provides the TSC frequency via CPUID/MSRs and making use
     for it for GOLDMONT.

   - TSC adjust MSR validation and sanitizing:

     The TSC adjust MSR contains the offset to the hardware counter. The
     sum of the adjust MSR and the counter is the TSC value which is
     read via RDTSC.

     On at least two machines from different vendors the BIOS sets the
     TSC adjust MSR to negative values. This happens on cold and warm
     boot. While on cold boot the offset is a few milliseconds, on warm
     boot it basically compensates the power on time of the system. The
     BIOSes are not even using the adjust MSR to set all CPUs in the
     package to the same offset. The offsets are different which renders
     the TSC unusable,

     What's worse is that the TSC deadline timer has a HW feature^Wbug.
     It malfunctions when the TSC adjust value is negative or greater
     equal 0x80000000 resulting in silent boot failures, hard lockups or
     non firing timers. This looks like some hardware internal 32/64bit
     issue with a sign extension problem. Intel has been silent so far
     on the issue.

     The update contains sanity checks and keeps the adjust register
     within working limits and in sync on the package.

     As it looks like this disease is spreading via BIOS crapware, we
     need to address this urgently as the boot failures are hard to
     debug for users"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Limit the adjust value further
  x86/tsc: Annotate printouts as firmware bug
  x86/tsc: Force TSC_ADJUST register to value >= zero
  x86/tsc: Validate TSC_ADJUST after resume
  x86/tsc: Validate cpumask pointer before accessing it
  x86/tsc: Fix broken CONFIG_X86_TSC=n build
  x86/tsc: Try to adjust TSC if sync test fails
  x86/tsc: Prepare warp test for TSC adjustment
  x86/tsc: Move sync cleanup to a safe place
  x86/tsc: Sync test only for the first cpu in a package
  x86/tsc: Verify TSC_ADJUST from idle
  x86/tsc: Store and check TSC ADJUST MSR
  x86/tsc: Detect random warps
  x86/tsc: Use X86_FEATURE_TSC_ADJUST in detect_art()
  x86/tsc: Finalize the split of the TSC_RELIABLE flag
  x86/tsc: Set TSC_KNOWN_FREQ and TSC_RELIABLE flags on Intel Atom SoCs
  x86/tsc: Mark Intel ATOM_GOLDMONT TSC reliable
  x86/tsc: Mark TSC frequency determined by CPUID as known
  x86/tsc: Add X86_FEATURE_TSC_KNOWN_FREQ flag

Pull x86 fixes and cleanups from Thomas Gleixner:
 "This set of updates contains:

   - Robustification for the logical package managment. Cures the AMD
     and virtualization issues.

   - Put the correct start_cpu() return address on the stack of the idle
     task.

   - Fixups for the fallout of the nodeid <-> cpuid persistent mapping
     modifciations

   - Move the x86/MPX specific mm_struct member to the arch specific
     mm_context where it belongs

   - Cleanups for C89 struct initializers and useless function
     arguments"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/floppy: Use designated initializers
  x86/mpx: Move bd_addr to mm_context_t
  x86/mm: Drop unused argument 'removed' from sync_global_pgds()
  ACPI/NUMA: Do not map pxm to node when NUMA is turned off
  x86/acpi: Use proper macro for invalid node
  x86/smpboot: Prevent false positive out of bounds cpumask access warning
  x86/boot/64: Push correct start_cpu() return address
  x86/boot/64: Use 'push' instead of 'call' in start_cpu()
  x86/smpboot: Make logical package management more robust

Pull timer fix from Thomas Gleixner:
 "Prevent NULL pointer dereferencing in the tick broadcast code. Old
  bug, which got unearthed by the hotplug ordering problem"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Prevent NULL pointer dereference

Pull SMP hotplug fixes from Thomas Gleixner:
 "Two fixlets for cpu hotplug:

   - Fix a subtle ordering problem with the dummy timer. This happened
     to work before the conversion by chance due to initcall ordering.

   - Fix the function comment for __cpuhp_setup_state()"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Clarify description of __cpuhp_setup_state() return value
  clocksource/dummy_timer: Move hotplug callback after the real timers

Pull irq fix from Thomas Gleixner:
 "A fix for the irq affinity spread algorithm so it handles non linear
  node numbering nicely"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Fix node generation from cpumask

Adjust value 0x80000000 and other values larger than that render the TSC
deadline timer disfunctional.

We have not yet any information about this from Intel, but experimentation
clearly proves that this is a 32/64 bit and sign extension issue.

If adjust values larger than that are actually required, which might be the
case for physical CPU hotplug, then we need to disable the deadline timer
on the affected package/CPUs and use the local APIC timer instead.

That requires some surgery in the APIC setup code, so we just limit the
ADJUST register value into the known to work range for now and revisit this
when Intel comes forth with proper information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>

Make it more obvious that the BIOS is screwed up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>