- 27 Jul, 2018 7 commits
-
-
Wolfram Sang authored
Since commit 1eace834 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Wolfram Sang authored
Since commit 1eace834 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by:
-
Wolfram Sang authored
Since commit 1eace834 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by:
-
Wolfram Sang authored
Since commit 1eace834 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by:
-
Wolfram Sang authored
Since commit 1eace834 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by:
-
Mika Båtsman authored
Probe of dvb_usb_gl861 was working at least with v4.4. Noticed the issue with v4.13 but according to similar issues the problem started with v4.9. [ 15.288065] transfer buffer not dma capable [ 15.288090] WARNING: CPU: 2 PID: 493 at drivers/usb/core/hcd.c:1595 usb_hcd_map_urb_for_dma+0x4e2/0x640 ...CUT... [ 15.288791] dvb_usb_gl861: probe of 3-7:1.0 failed with error -5 Tested with MSI Mega Sky 580 DVB-T Tuner [GL861] [mchehab+samsung@kernel.org: rebased on the top of upstream] Cc: stable@vger.kernel.org Signed-off-by:
Mika Båtsman <mika.batsman@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Some decoders and encoders can potentially have more than one source pad, so update the description to say 'at least one source pad'. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 25 Jul, 2018 33 commits
-
-
Stanimir Varbanov authored
This add HEVC codec support for venus versions 3xx and 4xx. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Reviewed-by:
Alexandre Courbot <acourbot@chromium.org> Tested-by:
-
Stanimir Varbanov authored
This adds sdm845 DT compatible string with it's resource data table. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Stanimir Varbanov authored
This is implementing multi-stream decoder support. The multi-stream will be used to enable/disable the primary/secondary decoder outputs. Depending on formats on both decoder outputs we could implement downscale, dithering and supporting UBWC (universal bandwidth compression) formats. The UBWC compressed raw format is used to optimize interconnect bandwidth for bigger resolutions like 4K and hence we will get some power-saving benefits as well. Both decoder outputs are distinguished by buffer_type field in the HFI packets. For example HFI_BUFFER_OUTPUT is the buffer type for primary decoder output and HFI_BUFFER_OUTPUT2 is for secondary decoder output. Starting from Venus 4xx the DPB buffers format must be UBWC, so the multi-stream becomes mandatory for this Venus version. That means that we need to allocate internally in the driver a set of DPB buffers (with UBWC NV12 format) and give them to the firmware. The other decoder output (we called it OPB) format will be NV12 linear format and with the same resolution (or smaller in case the user wants to downscale). The DPB buffers are used for decoder reference frames and those have to be in a specific format (UBWC). So one decoder output is used to fill those reference buffers while the other output is used to fill the userspace buffers with the user requested format. Signed-off-by:
-
Stanimir Varbanov authored
This move the calculations of raw and compressed buffer sizes on common helper and make it identical for encoder and decoder. Signed-off-by:
-
Stanimir Varbanov authored
Make a new function vdec_output_conf() for decoder output configuration. vdec_output_conf() will set properties via HFI interface related to the output configuration, and keep vdec_set_properties() which will set properties related to decoding parameters. Signed-off-by:
-
Stanimir Varbanov authored
Rework and rename vdec_cap_num_buffers() to get the number of input buffers too. Signed-off-by:
-
Stanimir Varbanov authored
Add a helper function to return current output picture buffer size. OPB sizes can vary depending on the selected decoder output(s). Signed-off-by:
-
Stanimir Varbanov authored
Extend venus_helper_set_num_bufs() helper function with one more argument to set number of output buffers for the secondary decoder output. Signed-off-by:
-
Stanimir Varbanov authored
These are new properties applicable to Venus version 4xx. Add the helpers and call them from decoder and encoder drivers. Signed-off-by:
-
Stanimir Varbanov authored
The new helper will has one more argument for buffer type, that way the decoder can configure the format on it's secondary output. Signed-off-by:
-
Stanimir Varbanov authored
This adds one more function argument to pass buffer type to set_output_resolution() helper function. That is a preparation to support secondary decoder output. Signed-off-by:
-
Stanimir Varbanov authored
Delete not used flag for capture buffer allocation mode and no longer used cap_bufs_mode_dynamic from instance structure. Signed-off-by:
-
Stanimir Varbanov authored
Add and use a helper function to set actual buffer size for particular buffer type. This is also preparation to use the second decoder output. Signed-off-by:
-
Stanimir Varbanov authored
Adds a new helper function to set dynamic buffer mode if it is supported by current HFI version. The dynamic buffer mode is set unconditionally for both decoder outputs. Signed-off-by:
-
Stanimir Varbanov authored
Rename is_reg_unreg_needed() to better name is_dynamic_bufmode() and use buffer mode from enumerated per codec capabilities. Signed-off-by:
-
Stanimir Varbanov authored
This adds common capability parser for all supported Venus versions. Having it will help to enumerate better the supported raw formats and codecs and also the capabilities for every codec like max/min width/height, framerate, bitrate and so on. Signed-off-by:
-
Stanimir Varbanov authored
Add two more clocks for Venus 4xx in core structure and create a new power enable function to handle it for 3xx/4xx versions. Signed-off-by:
-
Stanimir Varbanov authored
This adds suspend (power collapse) functionality by reusing the suspend function for Venus 3xx and also enables idle indicator property for Venus 4xx (where it is disabled by default). Signed-off-by:
-
Stanimir Varbanov authored
This moves setting of default properties (firmware debug, idle indicator and low power mode) from session init to core init. All of those properties are need to be enabled/disabled early so that they could be used before the clients are even initialized. The other reason is to set idle indicator property early before we enter into venus_suspend function where we need to check for ARM9 WFI. Signed-off-by:
-
Stanimir Varbanov authored
This fixes the suspend function for Venus 3xx versions by add a check for WFI (wait for interrupt) bit. This bit is on when the ARM9 is idle and entered in low power mode. Signed-off-by:
-
Stanimir Varbanov authored
Add AXI halt support for version 4xx by using venus wrapper registers. Signed-off-by:
-
Stanimir Varbanov authored
This adds handling of buffers of type OUTPUT2 which is needed to support Venus 4xx version. Signed-off-by:
-
Stanimir Varbanov authored
This makes possible to handle session_continue for 4xx as well. Signed-off-by:
-
Stanimir Varbanov authored
Adds set_properties method to handle newer 4xx properties and fall-back to 3xx for the rest. Signed-off-by:
-
Stanimir Varbanov authored
HFI version 4xx can pass more properties in the sequence change event, extend the event structure with them. Signed-off-by:
-
Stanimir Varbanov authored
This covers the differences between 1xx,3xx and 4xx. Signed-off-by:
-
Stanimir Varbanov authored
Data pointer should be incremented by size of the structure not the size of a pointer, correct the mistake. Signed-off-by:
-
Baruch Siach authored
Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Hugues Fruchet authored
Add an entry to make myself a maintainer of STM32 DCMI media driver. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Julia Lawall authored
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kinect_read returns the result of usb_control_msg, which can return a negtive error code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ int x; expression e,e1; identifier f; @@ *x = f(...); ... when != x = e1 when != if (x < 0 || ...) { ... return ...; } *x < sizeof(e) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Krzysztof Ha?asa authored
The error path currently calls tw686x_video_free() which requires vc->dev to be initialized, causing a NULL dereference on uninitizalized channels. Fix this by setting the vc->dev fields for all the channels first. Fixes: f8afaa8d ("[media] tw686x: Introduce an interface to support multiple DMA modes") Signed-off-by:
Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by:
-
Matt Ranostay authored
AMG88xx has an on-board thermistor which is used for more accurate processing of its temperature readings from the 8x8 thermopile array Cc: linux-hwmon@vger.kernel.org Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Philipp Zabel authored
This enables reordering support for h.264 main profile level 4.2, 5.0, and 5.1 streams. Even though we likely can't play back such streams at full speed, we should still recognize them correctly. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
