Convert the Renesas DRIF bindings to DT schema and update
MAINTAINERS accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add Fabrizio castro and remove Ramesh Shanmugasundaram.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some devices reference an output terminal as the source of extension
units. This is incorrect, as output terminals only have an input pin,
and thus can't be connected to any entity in the forward direction. The
resulting topology would cause issues when registering the media
controller graph. To avoid this problem, connect the extension unit to
the source of the output terminal instead.

While at it, and while no device has been reported to be affected by
this issue, also handle forward scans where two output terminals would
be connected together, and skip the terminals found through such an
invalid connection.
Reported-and-tested-by: John Nealy <jnealy3@yahoo.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

An error message in the forward scan code incorrectly prints the ID of
the source entity instead of the XU entity being scanned. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The CSI-2 receiver requires both its sink pad and its source pad to be
connected through enabled links in order to be started. Ensure this by
setting the MEDIA_PAD_FL_MUST_CONNECT flag on both pads.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The .link_setup() handler uses state->lock to protect the src_sd field.
This is only used in mipi_csis_s_stream(), which can't race
.link_setup() as the MC core prevents link setup when the pipeline is
streaming. Drop the lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If the .s_stream() handler fails after calling pm_runtime_get_sync(),
call pm_runtime_put() in the error path.

While at it add a few blank lines to make the code more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Expand the description of the binding itself and of individual
properties to include additional information that may not be immediately
appartent from reading the reference manual. Drop the last sentence of
the phy-supply description that refers to the driver's implementation.

While at it, fix the capitalization of MIPI CSI-2 in the title.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

DT bindings examples are customarily indented with 4 spaces.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The fsl,csis-hs-settle property isn't used by the driver anymore. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The reset-names property is incorrect, as it references the reset of the
MIPI D-PHY master, which is used by the DSI controller. Fixing the
property name would create backward-compatibility issues. As the device
has a single reset, we can instead drop reset-names completely, which
also simplifies the binding.

Fix the example accordingly to use the correct reset.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The EDID had a few mistakes as reported by edid-decode:

Block 1, CTA-861 Extension Block:
  Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1.
  Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.

Fixed those.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If some error occurs, URB buffers should also be freed. If they aren't
freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB
buffers as dvb is set to NULL. The function in which error occurs should
do all the cleanup for the allocations it had done.

Tested the patch with the reproducer provided by syzbot. This patch
fixes the memleak.

Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/sillicon/silicon/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/cariers/carriers/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

change 'vodeo'     to 'video'
change 'nevery'    to 'never'
change 'is'        to 'it'
change 'connevted' to 'connected'
change 'swichers'  to 'switchers'
change 'strucure'  to 'structure'
change 'unblanced' to 'unbalanced'
change 'fonctionality' to 'functionality'
Signed-off-by: Xiaofeng Cao <caoxiaofeng@yulong.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The EDID failed with two edid-decode warnings:

Block 1, CTA-861 Extension Block:
  Video Data Block: VIC 16 is the preferred timing, overriding the first detailed timings. Is this intended?
  Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.

In addition, the first DTD had a wrong vsync value (6 instead of 5).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Trivial fixes for many kernel-doc warnings. Most of the comments before
enums or struct can just be that: regular comments.

So just change /** to /*.

In one remaining case it was just a wrong construct: @mem_dev[] -> @mem_dev
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently the header argument is being passed by value, so a copy of 256
byte structure on the stack is potentially occurring. Fix this by passing
by reference to avoid any large stack copies.

Addresses-Coverity: ("Big parameter passed by value")

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a description for enum values in hantro_enc_fmt,
in order to fix these warnings:

drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420P' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420SP' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUYV422' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_UYVY422' not described in enum 'hantro_enc_fmt'

While here, improve the kernel-doc style, adding an empty
line before the fields of the structs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In case of error, the function device_link_add() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix to return negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Modify the documentation to point out which flags and structs are
used to configure the statistics.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these kernel-doc warnings:

drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 've' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_count' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_mask' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'streaming' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buffers' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'pixfmt' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'src_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'sink_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'subdev_lock' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'events' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'streaming' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'wbclk' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'fimc_lite' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'clk_provider' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'subdev_notifier' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'pipelines' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'link_setup_graph' not described in 'fimc_md'
drivers/media/platform/exynos4-is/fimc-core.h:261: warning: Function parameter or member 'alpha' not described in 'fimc_frame'
drivers/media/platform/exynos4-is/fimc-core.h:321: warning: Function parameter or member 'streaming' not described in 'fimc_vid_cap'
drivers/media/platform/exynos4-is/fimc-core.h:429: warning: Function parameter or member 'drv_data' not described in 'fimc_dev'
drivers/media/platform/exynos4-is/fimc-core.h:495: warning: Function parameter or member 'in_order_1p' not described in 'fimc_ctx'
drivers/media/platform/exynos4-is/fimc-core.h:673: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:685: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_pop'
drivers/media/platform/exynos4-is/fimc-core.h:700: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:711: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_pop'
drivers/media/platform/exynos4-is/fimc-reg.h:333: warning: Function parameter or member 'dev' not described in 'fimc_hw_set_dma_seq'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these kernel-doc warnings:

drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_MIXER' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_FIMD' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Excess enum value 'GSC_LOCAL' description in 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'color' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'num_comp' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_min' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_align' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'in_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'out_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_up_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'poly_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pre_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'local_sc_down' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'clk_names' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'num_clocks' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'num_clocks' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'v4l2_dev' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'rotation' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'hflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'vflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'gsc_ctrls' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'out_colorspace' not described in 'gsc_ctx'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these warnings:

drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_ret' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_status' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'memplanes' not described in 's5p_jpeg_fmt'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'subsampling' not described in 's5p_jpeg_fmt'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fixes these warnings:

drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'pix_limits' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'has_img_effect' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'vp_offset' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vdev' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vb_queue' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'offset' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_test_pattern' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx_cbcr' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cb' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cr' not described in 'camif_dev'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Give typo in kernel-doc documentation: hdr -> hrd

Fixes this warning:

drivers/media/platform/allegro-dvt/nal-h264.h:33: warning: expecting prototype for struct nal_h264_hdr_parameters. Prototype was for struct
nal_h264_hrd_parameters instead
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

s/Sysytem/System/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

'ia_css_isys.h' included in 'sh_css.c' is duplicated.
It is also included in the 30th line.

Link: https://lore.kernel.org/linux-media/20210306121104.218696-1-zhang.yunkai@zte.com.cnSigned-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The atomisp_set_fmt() function has multiple copies of the large
v4l2_format structure on its stack, resulting in a warning about
excessive stack usage in some rare randconfig builds.

drivers/staging/media/atomisp/pci/atomisp_cmd.c:5600:5: error: stack frame size of 1084 bytes in function 'atomisp_set_fmt' [-Werror,-Wframe-larger-than=]

Of this structure, only three members in the 'fmt.pix' member are
used, so simplify it by using the smaller v4l2_pix_format structure
directly. This reduces the stack usage to 612 bytes, and it could
be reduced further by only storing the three members that are used.

Link: https://lore.kernel.org/linux-media/20210226140524.3478346-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This patch fixes the following checkpatch.pl check:

CHECK: Macro argument 'i' may be better as '(i)' to avoid precedence issues

in file iss_regs.h

Link: https://lore.kernel.org/linux-media/20210221195308.1451-1-knv418@gmail.comSigned-off-by: Nikolay Kyx <knv418@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This patch fixes the following checkpatch.pl warning:

WARNING: Missing a blank line after declarations

in file ipu3-css-fw.h

Link: https://lore.kernel.org/linux-media/20210221081236.9758-2-knv418@gmail.comSigned-off-by: Nikolay Kyx <knv418@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

currently the functions defined in ibuf_ctrl_rmgr.c file are only
used by isys_init.c when CONFIG_VIDEO_ATOMISP_ISP2401 is selected
so dont't compile it when not needed, also fixes some sparse warnings

Link: https://lore.kernel.org/linux-media/YDEZu3oniT/vUMMY@karthik-strix-linux.karthek.comSigned-off-by: karthik alapati <mail@karthek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

fw_minibuffer[i].buffer is allocated by kmalloc in sh_css_load_blob_info
and by vmalloc in setup_binary. So use kvfree to decide which of those
allocators to use for freeing.

Also remove the useless cast.

Link: https://lore.kernel.org/linux-media/20210219101216.28406-1-jslaby@suse.czSigned-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

VIDEO_ATOMISP depends on VIDEO_V4L2_SUBDEV_API, if VIDEO_V4L2_SUBDEV_API
 is not selected, it will cause compilation error

drivers/staging/media/atomisp/pci/atomisp_cmd.c:6079:42: error:
 ‘struct v4l2_subdev_fh’ has no member named ‘pad’ atomisp_subdev_set_ffmt
(&asd->subdev, fh.pad, V4L2_SUBDEV_FORMAT_ACTIVE,

add auto select VIDEO_V4L2_SUBDEV_API if VIDEO_ATOMISP is selected

Link: https://lore.kernel.org/linux-media/20210210033830.961086-1-ztong0001@gmail.comSigned-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix below warnings reported by coccicheck:
./drivers/staging/media/atomisp/pci/atomisp_cmd.c:4269:2-8: WARNING:
NULL check before some freeing functions is not needed.
./drivers/staging/media/atomisp/pci/atomisp_cmd.c:4626:2-8: WARNING:
NULL check before some freeing functions is not needed.

Link: https://lore.kernel.org/linux-media/1611220312-89384-3-git-send-email-abaci-bugfix@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix below warnings reported by coccicheck:
./drivers/staging/media/atomisp/pci/sh_css_params.c:1575:2-8: WARNING:
NULL check before some freeing functions is not needed.
./drivers/staging/media/atomisp/pci/sh_css_params.c:3006:2-8: WARNING:
NULL check before some freeing functions is not needed.

Link: https://lore.kernel.org/linux-media/1611217731-56866-1-git-send-email-abaci-bugfix@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some randconfig builds include ia_css_firmware.h without first
including linux/device.h:

In file included from atomisp/pci/mmu/sh_mmu_mrfld.c:23:
In file included from atomisp/pci/atomisp_compat.h:22:
In file included from atomisp/pci/atomisp_compat_css20.h:24:
In file included from atomisp/pci/ia_css.h:28:
In file included from atomisp/pci/ia_css_control.h:25:
drivers/staging/media/atomisp//pci/ia_css_firmware.h:52:29: error: declaration of 'struct device' will not be visible outside of this function [-Werror,-Wvisibility]

Add a forward declaration to avoid the warning.

Link: https://lore.kernel.org/linux-media/20210108082337.2305938-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>