Convert nvmem_add_cells_from_of() to use the new nvmem_add_one_cell().
This will remove duplicate code and it will make it possible to add a
hook to a nvmem layout in between, which can change fields before the
cell is finally added.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-17-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a new function to add exactly one cell. This will be used by the
nvmem layout drivers to add custom cells. In contrast to the
nvmem_add_cells(), this has the advantage that we don't have to assemble
a list of cells on runtime.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-16-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If nvmem_add_cells() fails, the whole nvmem_register() will fail
and the cells will then be removed anyway. This is a preparation
to introduce a nvmem_add_one_cell() which can then be used by
nvmem_add_cells().

This is then the same to what nvmem_add_cells_from_table() and
nvmem_add_cells_from_of() do.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-15-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct nvmem_cell_info is used to describe a cell. Thus this should
really be in the nvmem-provider's header. There are two (unused) nvmem
access methods which use the nvmem_cell_info to describe the cell to be
accesses. One can argue, that they will create a cell before accessing,
thus they are both a provider and a consumer.

struct nvmem_cell_info will get used more and more by nvmem-providers,
don't force them to also include the consumer header, although they are
not.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-14-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes a cell can represend multiple values. For example, a base
ethernet address stored in the NVMEM can be expanded into multiple
discreet ones by adding an offset.

For this use case, introduce an index parameter which is then used to
distiguish between values. This parameter will then be passed to the
post process hook which can then use it to create different values
during reading.

At the moment, there is only support for the device tree path. You can
add the index to the phandle, e.g.

  &net {
          nvmem-cells = <&base_mac_address 2>;
          nvmem-cell-names = "mac-address";
  };

  &nvmem_provider {
          base_mac_address: base-mac-address@0 {
                  #nvmem-cell-cells = <1>;
                  reg = <0 6>;
          };
  };
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-13-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bindings describe the new '#nvmem-cell-cells' property. Now that the
arguments count property is optional, we just add this property to the
nvmem-cells.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-12-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes, future bindings for phandles will get additional arguments.
Thus the target node of the phandle will need a new #.*-cells property.
To be backwards compatible, this needs to be optional.

Prepare the DEFINE_SIMPLE_PROPS() to handle the cells name as optional.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-11-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a new variant of the of_parse_phandle_with_args() which treats the
cells name as optional. If it's missing, it is assumed that the phandle
has no arguments.

Up until now, a nvmem node didn't have any arguments, so all the device
trees haven't any '#*-cells' property. But there is a need for an
additional argument for the phandle, for which we need a '#*-cells'
property. Therefore, we need to support nvmem nodes with and without
this property.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-10-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a helper to add an offset to a ethernet address. This comes in handy
if you have a base ethernet address for multiple interfaces.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-9-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a spurious white space in for the ida_alloc() call.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-8-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Docuemnt the QFPROM on SM8250.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-7-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Docuemnt the QFPROM on SM8150.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-6-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is some configuration in SDM670's QFPROM. Add the compatible for
it.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-5-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document generic QFPROM compatibility on MSM8976.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move qcom,msm8974-qfprom after qcom,msm8916-qfprom to respect
alphabetical ordering.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the SRAM readout code is fixed by using 32-bit accesses, it
always returns the same values as register readout, so the A64 variant
no longer needs the workaround. This makes the D1 variant structure
redundant, so remove it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 6.3

Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.

Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (25 commits)
  dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
  dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
  dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
  interconnect: qcom: add a driver for sa8775p
  dt-bindings: interconnect: qcom: document the interconnects for sa8775p
  interconnect: qcom: add sdm670 interconnects
  dt-bindings: interconnect: add sdm670 interconnects
  dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
  dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
  dt-bindings: interconnect: split SM8450 to own schema
  dt-bindings: interconnect: split SC8280XP to own schema
  dt-bindings: interconnect: split SC7280 to own schema
  dt-bindings: interconnect: qcom: drop IPA_CORE related defines
  dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
  interconnect: qcom: sc8280xp: Drop IP0 interconnects
  interconnect: qcom: sc8180x: Drop IP0 interconnects
  interconnect: qcom: sm8250: Drop IP0 interconnects
  interconnect: qcom: sm8150: Drop IP0 interconnects
  interconnect: move ignore_list out of of_count_icc_providers()
  interconnect: qcom: sc7180: drop IP0 remnants
  ...

* icc-dt
  dt-bindings: interconnect: split SC7280 to own schema
  dt-bindings: interconnect: split SC8280XP to own schema
  dt-bindings: interconnect: split SM8450 to own schema
  dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
  dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
  dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
  dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
Signed-off-by: Georgi Djakov <djakov@kernel.org>

* icc-sa8775p
  dt-bindings: interconnect: qcom: document the interconnects for sa8775p
  interconnect: qcom: add a driver for sa8775p
  dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo

Link: https://lore.kernel.org/r/20230118140825.242544-2-brgl@bgdev.plSigned-off-by: Georgi Djakov <djakov@kernel.org>

* icc-sdm670
  dt-bindings: interconnect: add sdm670 interconnects
  interconnect: qcom: add sdm670 interconnects

Link: https://lore.kernel.org/r/20230111005155.50452-1-mailingradian@gmail.comSigned-off-by: Georgi Djakov <djakov@kernel.org>

Commits 2f372493 ("interconnect: qcom: sc7180: Drop IP0
interconnects") and 2fb251c2 ("interconnect: qcom: sdx55: Drop IP0
interconnects") removed IP0 interconnects (and ipa-virt devices support)
in favour of the RPMH clocks. Follow this example for other platforms
defining IP0 RPMH resource. While we are at it, remove several leftover
from the mentioned patches.

* icc-ip0-migration:
  interconnect: qcom: sdx55: drop IP0 remnants
  interconnect: qcom: sc7180: drop IP0 remnants
  interconnect: move ignore_list out of of_count_icc_providers()
  interconnect: qcom: sm8150: Drop IP0 interconnects
  interconnect: qcom: sm8250: Drop IP0 interconnects
  interconnect: qcom: sc8180x: Drop IP0 interconnects
  interconnect: qcom: sc8280xp: Drop IP0 interconnects
  dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
  dt-bindings: interconnect: qcom: drop IPA_CORE related defines

Link: https://lore.kernel.org/r/20230109002935.244320-1-dmitry.baryshkov@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

We need the char-misc driver fixes in here as other patches depend on
them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes that resolve some reported problems.
  These include:

   - gadget driver fixes

   - dwc3 driver fix

   - typec driver fix

   - MAINTAINERS file update.

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Don't attempt to resume the ports before they exist
  usb: gadget: udc: do not clear gadget driver.bus
  usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
  usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
  usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  MAINTAINERS: Add myself as UVC Gadget Maintainer

Pull tty/serial driver fixes from Greg KH:
 "Here are some small serial and vt fixes. These include:

   - 8250 driver fixes relating to dma issues

   - stm32 serial driver fix for threaded irqs

   - vc_screen bugfix for reported problems.

  All have been in linux-next for a while with no reported problems"

* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
  serial: 8250_dma: Fix DMA Rx rearm race
  serial: 8250_dma: Fix DMA Rx completion race
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small char/misc/whatever driver fixes. They
  include:

   - IIO driver fixes for some reported problems

   - nvmem driver fixes

   - fpga driver fixes

   - debugfs memory leak fix in the hv_balloon and irqdomain code
     (irqdomain change was acked by the maintainer)

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
  kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
  HV: hv_balloon: fix memory leak with using debugfs_lookup()
  nvmem: qcom-spmi-sdam: fix module autoloading
  nvmem: core: fix return value
  nvmem: core: fix cell removal on error
  nvmem: core: fix device node refcounting
  nvmem: core: fix registration vs use race
  nvmem: core: fix cleanup after dev_set_name()
  nvmem: core: remove nvmem_config wp_gpio
  nvmem: core: initialise nvmem->id early
  nvmem: sunxi_sid: Always use 32-bit MMIO reads
  nvmem: brcm_nvram: Add check for kzalloc
  iio: imu: fxos8700: fix MAGN sensor scale and unit
  iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  iio: imu: fxos8700: fix failed initialization ODR mode assignment
  iio: imu: fxos8700: fix incorrect ODR mode readback
  iio: light: cm32181: Fix PM support on system with 2 I2C resources
  iio: hid: fix the retval in gyro_3d_capture_sample
  iio: hid: fix the retval in accel_3d_capture_sample
  iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  ...

Pull fbdev fixes from Helge Deller:

 - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
   overflows reported by syzbot

 - switch omapfb to use kstrtobool()

 - switch some fbdev drivers to use the backlight helpers

* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbcon: Check font dimension limits
  fbdev: omapfb: Use kstrtobool() instead of strtobool()
  fbdev: fbmon: fix function name in kernel-doc
  fbdev: atmel_lcdfb: Rework backlight status updates
  fbdev: riva: Use backlight helper
  fbdev: omapfb: panel-dsi-cm: Use backlight helper
  fbdev: nvidia: Use backlight helper
  fbdev: mx3fb: Use backlight helper
  fbdev: radeon: Use backlight helper
  fbdev: atyfb: Use backlight helper
  fbdev: aty128fb: Use backlight helper

Pull x86 fix from Borislav Petkov:

 - Prevent the compiler from reordering accesses to debug regs which
   could cause a #VC exception in SEV-ES guests at the wrong place in
   the NMI handling path

* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses

Pull perf fix from Borislav Petkov:

 - Lock the proper critical section when dealing with perf event context

* tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_pmu_context serialization

Pull powerpc fixes from Michael Ellerman:
 "It's a bit of a big batch for rc6, but just because I didn't send any
  fixes the last week or two while I was on vacation, next week should
  be quieter:

   - Fix a few objtool warnings since we recently enabled objtool.

   - Fix a deadlock with the hash MMU vs perf record.

   - Fix perf profiling of asynchronous interrupt handlers.

   - Revert the IMC PMU nest_init_lock to being a mutex.

   - Two commits fixing problems with the kexec_file FDT size
     estimation.

   - Two commits fixing problems with strict RWX vs kernels running at
     non-zero.

   - Reconnect tlb_flush() to hash__tlb_flush()

  Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
  and Sourabh Jain"

* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
  powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
  powerpc/64s/radix: Fix RWX mapping with relocated kernel
  powerpc/64s/radix: Fix crash with unaligned relocated kernel
  powerpc/kexec_file: Fix division by zero in extra size estimation
  powerpc/imc-pmu: Revert nest_init_lock to being a mutex
  powerpc/64: Fix perf profiling asynchronous interrupt handlers
  powerpc/64s: Fix local irq disable when PMIs are disabled
  powerpc/kvm: Fix unannotated intra-function call warning
  powerpc/85xx: Fix unannotated intra-function call warning

Pull RTC fixes from Alexandre Belloni:
 "Here are a few fixes for 6.2. The EFI one is the most important as it
  allows some RTCs to actually work. The other two are warnings that are
  worth fixing.

   - efi: make WAKEUP services optional

   - sunplus: fix format string warning"

* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: sunplus: fix format string for printing resource
  dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
  rtc: efi: Enable SET/GET WAKEUP services as optional

Merge tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix two bugs (for building and for signing) when MODULE_SIG_KEY
   contains a PKCS#11 URI

* tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI
  certs: Fix build error when PKCS#11 URI contains semicolon

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Yet another fix for non-CPU accesses to the memory backing the
     VGICv3 subsystem

   - A set of fixes for the setlftest checking for the S1PTW behaviour
     after the fix that went in ealier in the cycle"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: aarch64: Test read-only PT memory regions
  KVM: selftests: aarch64: Fix check of dirty log PT write
  KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
  KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
  KVM: arm64: Allow no running vcpu on saving vgic3 pending table
  KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
  KVM: arm64: Add helper vgic_write_guest_lock()

Pull parisc architecture fixes from Helge Deller:

 - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
   kernel

 - pdc_iodc_print() dropped chars for newline in strings

 - Drop constants in favour of PRIV_USER

 - use safer strscpy() function in pdc_stable driver

* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
  parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
  parisc: Fix return code of pdc_iodc_print()
  parisc: pdc_stable: use strscpy() to instead of strncpy()

Pull OpenRISC mailing list update from Stafford Horne:
 "The old mailing list for OpenRISC died due to some infrastructure
  issues and the people in charge decided not to keep it running. We
  have migrated this and the users over to kernel.org infrastructure.

  Sending this out now to avoid kernel developers getting lots of
  bounced mails for using the old list"

* tag 'for-linus' of https://github.com/openrisc/linux:
  MAINTAINERS: Update OpenRISC mailing list

Merge tag 'kvmarm-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.2, take #3

- Yet another fix for non-CPU accesses to the memory backing
  the VGICv3 subsystem

- A set of fixes for the setlftest checking for the S1PTW
  behaviour after the fix that went in ealier in the cycle

blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.

The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:

http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com
Kernel Branch: 6.2.0-rc5-next-20230124
Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing
Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharingReported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: 2d2699d9 ("fbcon: font setting should check limitation of driver")
Cc: stable@vger.kernel.org
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull block fixes from Jens Axboe:
 "A bit bigger than I'd like at this point, but mostly a bunch of little
  fixes. In detail:

   - NVMe pull request via Christoph:
       - Fix a missing queue put in nvmet_fc_ls_create_association
         (Amit Engel)
       - Clear queue pointers on tag_set initialization failure
         (Maurizio Lombardi)
       - Use workqueue dedicated to authentication (Shin'ichiro
         Kawasaki)

   - Fix for an overflow in ublk (Liu)

   - Fix for leaking a queue reference in block cgroups (Ming)

   - Fix for a use-after-free in BFQ (Yu)"

* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
  blk-cgroup: don't update io stat for root cgroup
  nvme-auth: use workqueue dedicated to authentication
  nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
  nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
  nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
  block: Fix the blk_mq_destroy_queue() documentation
  block: ublk: extending queue_size to fix overflow
  block, bfq: fix uaf for bfqq in bic_set_bfqq()

Pull ceph fix from Ilya Dryomov:
 "A safeguard to prevent the kernel client from further damaging the
  filesystem after running into a case of an invalid snap trace.

  The root cause of this metadata corruption is still being investigated
  but it appears to be stemming from the MDS. As such, this is the best
  we can do for now"

* tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client:
  ceph: blocklist the kclient when receiving corrupted snap trace
  ceph: move mount state enum to super.h

Pull EFI fixes from Ard Biesheuvel:

 - handle potential mremap() failure gracefully

 - don't reject EFI memory attributes table version 2

* tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix potential NULL deref in efi_mem_reserve_persistent
  efi: Accept version 2 of memory attributes table