- 15 Apr, 2023 31 commits
-
-
Hans Verkuil authored
The U and V components were swapped. Drop the FORMAT_BYTE_SWAP to fix this. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans Verkuil authored
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by:
-
Hans Verkuil authored
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by:
-
Hans Verkuil authored
Use the video_fmt in saa7146_vv instead of having a pointer to it in struct saa7146_buf. Signed-off-by:
-
Hans Verkuil authored
Instead use vv->resources and video_drvdata(file) to obtain this information. This prepares for the vb2 conversion later when saa7146_fh is dropped completely. Signed-off-by:
-
Hans Verkuil authored
When this driver is loaded for the first time, input 0 is not initialized. In order to capture from that input you would have to switch to input 1, then back to 0. Properly initialize the input when the driver is loaded. Signed-off-by:
-
Hans Verkuil authored
The VBI output device didn't have VFL_DIR_TX set, so this didn't work anymore since the V4L2 core thought that it was a capture device instead. Fix this. Also drop invalid capabilities for the VBI output device. Signed-off-by:
-
Hans Verkuil authored
The patch removing overlay support also removed the old saa7146_disable_clipping() function, but that is needed in order to capture video. Without this the Hexium cards won't show any video. Signed-off-by:
-
Biju Das authored
Document VSPD found in RZ/V2L SoC. The VSPD block is identical to RZ/G2L SoC and therefore use RZ/G2L fallback to avoid any driver changes. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Biju Das authored
Document FCPVD found in RZ/G2L alike SoCs. FCPVD block is similar to FCP for VSP found on R-Car SoC's . It has 3 clocks compared to 1 clock on fcpv. Introduce new compatibles renesas,r9a07g044-fcpvd for RZ/G2{L,LC} and renesas,r9a07g054-fcpvd for RZ/V2L to handle this difference. The 3 clocks are shared between du, vspd and fcpvd. No driver changes are required as generic compatible string "renesas,fcpv" will be used as a fallback. Signed-off-by:Rob Herring <robh@kernel.org> Signed-off-by:
-
Irui Wang authored
CERT-C Characters and Strings: check core id is in valid range: dev->reg_base[dev->venc_pdata->core_id] evaluates to an address that could be at negative offset of an array. CERT-C Expression: check buf is not NULL before used: Dereferencing buf, which is known to be NULL. Signed-off-by:
Irui Wang <irui.wang@mediatek.com> Signed-off-by:
-
Wei Chen authored
variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. Signed-off-by:
Wei Chen <harperchen1110@gmail.com> Signed-off-by:
-
Yunfei Dong authored
Need to disable decoder power when remove decoder hardware driver, adding remove callback function in the definition of platform driver. Fixes: c05bada3 ("media: mtk-vcodec: Add to support multi hardware decode") Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Yunfei Dong authored
Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78 Fixes: ba31a5b3 ("media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm") Signed-off-by:
-
Ye Xingchen authored
Switch to devm_reset_control_array_get_optional_exclusive() API. Signed-off-by:
Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Niklas Söderlund authored
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Niklas Söderlund authored
Document support for the CSI-2 module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
-
Niklas Söderlund authored
Document support for the ISP module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Hans Verkuil authored
The CEC pin framework is affected by NTP daemons speeding up or slowing down the system clock. Document this and explain how to fix this for chronyd. Signed-off-by:
-
Hans Verkuil authored
The valid_la boolean is used to check if the destination logical address is either 15 (broadcast) or our logical address. If it is for another logical address, then only adapters that have the CEC_CAP_MONITOR_ALL capability can pass it on. However, it is also used to do more detailed validity checks, such as whether the message was broadcast when it should have been directed, or vice versa, in which case the message must be ignored according to the spec. But that should not apply to monitoring. Add a new bool that just checks the LA and nothing else. Signed-off-by:
-
- 13 Apr, 2023 1 commit
-
-
Benjamin Gaignard authored
ctx->vpu_dst_fmt is no more initialized before calling hantro_try_fmt() so assigne it to vpu_fmt led to crash the kernel. Like for decoder case use 'fmt' as format for encoder and clean up the code. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: db6f68b5 ("media: verisilicon: Do not set context src/dst formats in reset functions") Signed-off-by:
-
- 12 Apr, 2023 8 commits
-
-
Laurent Pinchart authored
Structures passed to subdev pad operations are all zero-initialized when declaring variables. In most cases, this is done with designated initializers to initialize some of the fields to specific values, but in a minority of cases the structures are zero-initialized by assigning them to '{ 0 }' or '{ }'. Improve coding style consistency by using designated initializers where possible, always initializing the 'which' field. Signed-off-by:Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Structures passed to subdev pad operations are all zero-initialized, but not always with the same kind of code constructs. While most drivers used designated initializers, which zero all the fields that are not specified, when declaring variables, some use memset(). Those two methods lead to the same end result, and, depending on compiler optimizations, may even be completely equivalent, but they're not consistent. Improve coding style consistency by using designated initializers instead of calling memset(). Where applicable, also move the variables to inner scopes of for loops to ensure correct initialization in all iterations. Signed-off-by:
-
Laurent Pinchart authored
Several drivers call subdev pad operations, passing structures that are not fully zeroed. While the drivers initialize the fields they care about explicitly, this results in reserved fields having uninitialized values. Future kernel API changes that make use of those fields thus risk breaking proper driver operation in ways that could be hard to detect. To avoid this, make the code more robust by zero-initializing all the structures passed to subdev pad operation. Maintain a consistent coding style by preferring designated initializers (which zero-initialize all the fields that are not specified) over memset() where possible, and make variable declarations local to inner scopes where applicable. One notable exception to this rule is in the ipu3 driver, where a memset() is needed as the structure is not a local variable but a function parameter provided by the caller. Not all fields of those structures can be initialized when declaring the variables, as the values for those fields are computed later in the code. Initialize the 'which' field in all cases, and other fields when the variable declaration is so close to the v4l2_subdev_call() call that it keeps all the context easily visible when reading the code, to avoid hindering readability. Signed-off-by:
-
Laurent Pinchart authored
Variable initialization code in notify_src_chg() is incorrectly indented. Fix it. Signed-off-by:
-
Laurent Pinchart authored
Commit 0d346d2a ("media: v4l2-subdev: add subdev-wide state struct") applied a large media tree-wide change produced by coccinelle. It was so large that a set of identical indentation issues went unnoticed during review. Fix them. While at it, and because it's easy to review both changes together, add a trailing comma for the last (and only) struct member initialization of the related structures, to avoid future changes should new fields need to be initialized. Fixes: 0d346d2a ("media: v4l2-subdev: add subdev-wide state struct") Signed-off-by:
-
Fritz Koenig authored
According to msm_media_info.h the correct alignment for the stride of P010 buffers is 128. Signed-off-by:
Fritz Koenig <frkoenig@chromium.org> Reviewed-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
-
Dikshita Agarwal authored
Add handling for below commands in encoder: 1. V4L2_ENC_CMD_STOP 2. V4L2_ENC_CMD_START Signed-off-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by:
-
Viswanath Boma authored
Currently QP range set from client is not communicated to video firmware. Add support for the QP range HFI to set the same to firmware. Signed-off-by:
Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by:
-
