- 04 Oct, 2024 7 commits
-
-
Jakub Kicinski authored
Nick Child says: ==================== ibmvnic: Fix for send scrq direct This is a v2 of a patchset (now just patch) which addresses a bug in a new feature which is causing major link UP issues with certain physical cards. For a full summary of the issue: 1. During vnic initialization we get the following values from vnic server regarding "Transmit / Receive Descriptor Requirement" (see PAPR Table 584. CAPABILITIES Commands): - LSO Tx frame = 0x0F , header offsets + L2, L3, L4 headers required - CSO Tx frame = 0x0C , header offsets + L2 header required - standard frame = 0x0C , header offsets + L2 header required 2. Assume we are dealing with only "standard frames" from now on (no CSO, no LSO) 3. When using 100G backing device, we don't hand vnic server any header information and TX is successful 4. When using 25G backing device, we don't hand vnic server any header information and TX fails and we get "Adapter Error" transport events. The obvious issue here is that vnic client should be respecting the 0X0C header requirement for standard frames. But 100G cards will also give 0x0C despite the fact that we know TX works if we ignore it. That being said, we still must respect values given from the managing server. Will need to work with them going forward to hopefully get 100G cards to return 0x00 for this bitstring so the performance gains of using send_subcrq_direct can be continued. ==================== Link: https://patch.msgid.link/20241001163200.1802522-1-nnac123@linux.ibm.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Nick Child authored
Previously, the TX header requirement for standard frames was ignored. This requirement is a bitstring sent from the VIOS which maps to the type of header information needed during TX. If no header information, is needed then send subcrq direct can be used (which can be more performant). This bitstring was previously ignored for standard packets (AKA non LSO, non CSO) due to the belief that the bitstring was over-cautionary. It turns out that there are some configurations where the backing device does need header information for transmission of standard packets. If the information is not supplied then this causes continuous "Adapter error" transport events. Therefore, this bitstring should be respected and observed before considering the use of send subcrq direct. Fixes: 74839f7a ("ibmvnic: Introduce send sub-crq direct") Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241001163200.1802522-2-nnac123@linux.ibm.comSigned-off-by:
-
Jakub Kicinski authored
Andy Roulin says: ==================== netfilter: br_netfilter: fix panic with metadata_dst skb There's a kernel panic possible in the br_netfilter module when sending untagged traffic via a VxLAN device. Traceback is included below. This happens during the check for fragmentation in br_nf_dev_queue_xmit if the MTU on the VxLAN device is not big enough. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded This case was never supported in the first place, so the first patch drops such packets. A regression selftest is added as part of the second patch. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ ==================== Link: https://patch.msgid.link/20241001154400.22787-1-aroulin@nvidia.comSigned-off-by:
-
Andy Roulin authored
Add a new netfilter selftests to test against br_netfilter panics when VxLAN single-device is used together with untagged traffic and high MTU. Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Andy Roulin <aroulin@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241001154400.22787-3-aroulin@nvidia.comSigned-off-by:
-
Andy Roulin authored
Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
The blamed commit introduced an unexpected regression in the sja1105 driver. Packets from VLAN-unaware bridge ports get received correctly, but the protocol stack can't seem to decode them properly. For ds->untag_bridge_pvid users (thus also sja1105), the blamed commit did introduce a functional change: dsa_switch_rcv() used to call dsa_untag_bridge_pvid(), which looked like this: err = br_vlan_get_proto(br, &proto); if (err) return skb; /* Move VLAN tag from data to hwaccel */ if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) { skb = skb_vlan_untag(skb); if (!skb) return NULL; } and now it calls dsa_software_vlan_untag() which has just this: /* Move VLAN tag from data to hwaccel */ if (!skb_vlan_tag_present(skb)) { skb = skb_vlan_untag(skb); if (!skb) return NULL; } thus lacks any skb->protocol == bridge VLAN protocol check. That check is deferred until a later check for skb->vlan_proto (in the hwaccel area). The new code is problematic because, for VLAN-untagged packets, skb_vlan_untag() blindly takes the 4 bytes starting with the EtherType and turns them into a hwaccel VLAN tag. This is what breaks the protocol stack. It would be tempting to "make it work as before" and only call skb_vlan_untag() for those packets with the skb->protocol actually representing a VLAN. But the premise of the newly introduced dsa_software_vlan_untag() core function is not wrong. Drivers set ds->untag_bridge_pvid or ds->untag_vlan_aware_bridge_pvid presumably because they send all traffic to the CPU reception path as VLAN-tagged. So why should we spend any additional CPU cycles assuming that the packet may be VLAN-untagged? And why does the sja1105 driver opt into ds->untag_bridge_pvid if it doesn't always deliver packets to the CPU as VLAN-tagged? The answer to the latter question is indeed more interesting: it doesn't need to. This got done in commit 884be12f ("net: dsa: sja1105: add support for imprecise RX"), because I thought it would be needed, but I didn't realize that it doesn't actually make a difference. As explained in the commit message of the blamed patch, ds->untag_bridge_pvid only makes a difference in the VLAN-untagged receive path of a bridge port. However, in that operating mode, tag_sja1105.c makes use of VLAN tags with the ETH_P_SJA1105 TPID, and it decodes and consumes these VLAN tags as if they were DSA tags (aka tag_8021q operation). Even if commit 884be12f ("net: dsa: sja1105: add support for imprecise RX") added this logic in sja1105_bridge_vlan_add(): /* Always install bridge VLANs as egress-tagged on the CPU port. */ if (dsa_is_cpu_port(ds, port)) flags = 0; that was for _bridge_ VLANs, which are _not_ committed to hardware in VLAN-unaware mode (aka the mode where ds->untag_bridge_pvid does anything at all). Even prior to that change, the tag_8021q VLANs were always installed as egress-tagged on the CPU port, see dsa_switch_tag_8021q_vlan_add(): u16 flags = 0; // egress-tagged, non-PVID if (dsa_port_is_user(dp)) flags |= BRIDGE_VLAN_INFO_UNTAGGED | BRIDGE_VLAN_INFO_PVID; err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid, flags); if (err) return err; Whether the sja1105 driver needs the new flag, ds->untag_vlan_aware_bridge_pvid, rather than ds->untag_bridge_pvid, is a separate discussion. To fix the current bug in VLAN-unaware bridge mode, I would argue that the sja1105 driver should not request something it doesn't need, rather than complicating the core DSA helper. Whereas before the blamed commit, this setting was harmless, now it has caused breakage. Fixes: 93e4649e ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241001140206.50933-1-vladimir.oltean@nxp.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-09-30 (ice, idpf) This series contains updates to ice and idpf drivers: For ice: Michal corrects setting of dst VSI on LAN filters and adds clearing of port VLAN configuration during reset. Gui-Dong Han corrects failures to decrement refcount in some error paths. Przemek resolves a memory leak in ice_init_tx_topology(). Arkadiusz prevents setting of DPLL_PIN_STATE_SELECTABLE to an improper value. Dave stops clearing of VLAN tracking bit to allow for VLANs to be properly restored after reset. For idpf: Ahmed sets uninitialized dyn_ctl_intrvl_s value. Josh corrects use and reporting of mailbox size. Larysa corrects order of function calls during de-initialization. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: idpf: deinit virtchnl transaction manager after vport and vectors idpf: use actual mbx receive payload length idpf: fix VF dynamic interrupt ctl register initialization ice: fix VLAN replay after reset ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pins ice: fix memleak in ice_init_tx_topology() ice: clear port vlan config during reset ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count() ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins() ice: set correct dst VSI in only LAN filters ==================== Link: https://patch.msgid.link/20240930223601.3137464-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 03 Oct, 2024 33 commits
-
-
Leo Stone authored
Fix multiple grammatical issues and add a missing period to improve readability. Signed-off-by:
Leo Stone <leocstone@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
David Howells says: ==================== rxrpc: Miscellaneous fixes Here some miscellaneous fixes for AF_RXRPC: (1) Fix a race in the I/O thread vs UDP socket setup. (2) Fix an uninitialised variable. ==================== Link: https://patch.msgid.link/20241001132702.3122709-1-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Fix the uninitialised txb variable in rxrpc_send_data() by moving the code that loads it above all the jumps to maybe_error, txb being stored back into call->tx_pending right before the normal return. Fixes: b0f571ec ("rxrpc: Fix locking in rxrpc's sendmsg") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lists.infradead.org/pipermail/linux-afs/2024-October/008896.htmlSigned-off-by:
David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241001132702.3122709-3-dhowells@redhat.comSigned-off-by:
-
David Howells authored
In rxrpc_open_socket(), it sets up the socket and then sets up the I/O thread that will handle it. This is a problem, however, as there's a gap between the two phases in which a packet may come into rxrpc_encap_rcv() from the UDP packet but we oops when trying to wake the not-yet created I/O thread. As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's no I/O thread yet. A better, but more intrusive fix would perhaps be to rearrange things such that the socket creation is done by the I/O thread. Fixes: a275da62 ("rxrpc: Create a per-local endpoint receive queue and I/O thread") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241001132702.3122709-2-dhowells@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Neal Cardwell says: ==================== tcp: 3 fixes for retrans_stamp and undo logic Geumhwan Yu <geumhwan.yu@samsung.com> recently reported and diagnosed a regression in TCP loss recovery undo logic in the case where a TCP connection enters fast recovery, is unable to retransmit anything due to TSQ, and then receives an ACK allowing forward progress. The sender should be able to undo the spurious loss recovery in this case, but was not doing so. The first patch fixes this regression. Running our suite of packetdrill tests with the first fix, the tests highlighted two other small bugs in the way retrans_stamp is updated in some rare corner cases. The second two patches fix those other two small bugs. Thanks to Geumhwan Yu for the bug report! ==================== Link: https://patch.msgid.link/20241001200517.2756803-1-ncardwell.sw@gmail.comSigned-off-by:
-
Neal Cardwell authored
Fix tcp_rcv_synrecv_state_fastopen() to not zero retrans_stamp if retransmits are outstanding. tcp_fastopen_synack_timer() sets retrans_stamp, so typically we'll need to zero retrans_stamp here to prevent spurious retransmits_timed_out(). The logic to zero retrans_stamp is from this 2019 commit: commit cd736d8b ("tcp: fix retrans timestamp on passive Fast Open") However, in the corner case where the ACK of our TFO SYNACK carried some SACK blocks that caused us to enter TCP_CA_Recovery then that non-zero retrans_stamp corresponds to the active fast recovery, and we need to leave retrans_stamp with its current non-zero value, for correct ETIMEDOUT and undo behavior. Fixes: cd736d8b ("tcp: fix retrans timestamp on passive Fast Open") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Neal Cardwell authored
Fix tcp_enter_recovery() so that if there are no retransmits out then we zero retrans_stamp when entering fast recovery. This is necessary to fix two buggy behaviors. Currently a non-zero retrans_stamp value can persist across multiple back-to-back loss recovery episodes. This is because we generally only clears retrans_stamp if we are completely done with loss recoveries, and get to tcp_try_to_open() and find !tcp_any_retrans_done(sk). This behavior causes two bugs: (1) When a loss recovery episode (CA_Loss or CA_Recovery) is followed immediately by a new CA_Recovery, the retrans_stamp value can persist and can be a time before this new CA_Recovery episode starts. That means that timestamp-based undo will be using the wrong retrans_stamp (a value that is too old) when comparing incoming TS ecr values to retrans_stamp to see if the current fast recovery episode can be undone. (2) If there is a roughly minutes-long sequence of back-to-back fast recovery episodes, one after another (e.g. in a shallow-buffered or policed bottleneck), where each fast recovery successfully makes forward progress and recovers one window of sequence space (but leaves at least one retransmit in flight at the end of the recovery), followed by several RTOs, then the ETIMEDOUT check may be using the wrong retrans_stamp (a value set at the start of the first fast recovery in the sequence). This can cause a very premature ETIMEDOUT, killing the connection prematurely. This commit changes the code to zero retrans_stamp when entering fast recovery, when this is known to be safe (no retransmits are out in the network). That ensures that when starting a fast recovery episode, and it is safe to do so, retrans_stamp is set when we send the fast retransmit packet. That addresses both bug (1) and bug (2) by ensuring that (if no retransmits are out when we start a fast recovery) we use the initial fast retransmit of this fast recovery as the time value for undo and ETIMEDOUT calculations. This makes intuitive sense, since the start of a new fast recovery episode (in a scenario where no lost packets are out in the network) means that the connection has made forward progress since the last RTO or fast recovery, and we should thus "restart the clock" used for both undo and ETIMEDOUT logic. Note that if when we start fast recovery there *are* retransmits out in the network, there can still be undesirable (1)/(2) issues. For example, after this patch we can still have the (1) and (2) problems in cases like this: + round 1: sender sends flight 1 + round 2: sender receives SACKs and enters fast recovery 1, retransmits some packets in flight 1 and then sends some new data as flight 2 + round 3: sender receives some SACKs for flight 2, notes losses, and retransmits some packets to fill the holes in flight 2 + fast recovery has some lost retransmits in flight 1 and continues for one or more rounds sending retransmits for flight 1 and flight 2 + fast recovery 1 completes when snd_una reaches high_seq at end of flight 1 + there are still holes in the SACK scoreboard in flight 2, so we enter fast recovery 2, but some retransmits in the flight 2 sequence range are still in flight (retrans_out > 0), so we can't execute the new retrans_stamp=0 added here to clear retrans_stamp It's not yet clear how to fix these remaining (1)/(2) issues in an efficient way without breaking undo behavior, given that retrans_stamp is currently used for undo and ETIMEDOUT. Perhaps the optimal (but expensive) strategy would be to set retrans_stamp to the timestamp of the earliest outstanding retransmit when entering fast recovery. But at least this commit makes things better. Note that this does not change the semantics of retrans_stamp; it simply makes retrans_stamp accurate in some cases where it was not before: (1) Some loss recovery, followed by an immediate entry into a fast recovery, where there are no retransmits out when entering the fast recovery. (2) When a TFO server has a SYNACK retransmit that sets retrans_stamp, and then the ACK that completes the 3-way handshake has SACK blocks that trigger a fast recovery. In this case when entering fast recovery we want to zero out the retrans_stamp from the TFO SYNACK retransmit, and set the retrans_stamp based on the timestamp of the fast recovery. We introduce a tcp_retrans_stamp_cleanup() helper, because this two-line sequence already appears in 3 places and is about to appear in 2 more as a result of this bug fix patch series. Once this bug fix patches series in the net branch makes it into the net-next branch we'll update the 3 other call sites to use the new helper. This is a long-standing issue. The Fixes tag below is chosen to be the oldest commit at which the patch will apply cleanly, which is from Linux v3.5 in 2012. Fixes: 1fbc3405 ("tcp: early retransmit: tcp_enter_recovery()") Signed-off-by:
-
Neal Cardwell authored
Fix the TCP loss recovery undo logic in tcp_packet_delayed() so that it can trigger undo even if TSQ prevents a fast recovery episode from reaching tcp_retransmit_skb(). Geumhwan Yu <geumhwan.yu@samsung.com> recently reported that after this commit from 2019: commit bc9f38c8 ("tcp: avoid unconditional congestion window undo on SYN retransmit") ...and before this fix we could have buggy scenarios like the following: + Due to reordering, a TCP connection receives some SACKs and enters a spurious fast recovery. + TSQ prevents all invocations of tcp_retransmit_skb(), because many skbs are queued in lower layers of the sending machine's network stack; thus tp->retrans_stamp remains 0. + The connection receives a TCP timestamp ECR value echoing a timestamp before the fast recovery, indicating that the fast recovery was spurious. + The connection fails to undo the spurious fast recovery because tp->retrans_stamp is 0, and thus tcp_packet_delayed() returns false, due to the new logic in the 2019 commit: commit bc9f38c8 ("tcp: avoid unconditional congestion window undo on SYN retransmit") This fix tweaks the logic to be more similar to the tcp_packet_delayed() logic before bc9f38c8, except that we take care not to be fooled by the FLAG_SYN_ACKED code path zeroing out tp->retrans_stamp (the bug noted and fixed by Yuchung in bc9f38c8). Note that this returns the high-level behavior of tcp_packet_delayed() to again match the comment for the function, which says: "Nothing was retransmitted or returned timestamp is less than timestamp of the first retransmission." Note that this comment is in the original 2005-04-16 Linux git commit, so this is evidently long-standing behavior. Fixes: bc9f38c8 ("tcp: avoid unconditional congestion window undo on SYN retransmit") Reported-by:
Geumhwan Yu <geumhwan.yu@samsung.com> Diagnosed-by:
-
Jakub Kicinski authored
Abhishek Chauhan says: ==================== Fix AQR PMA capabilities Patch 1:- AQR115c reports incorrect PMA capabilities which includes 10G/5G and also incorrectly disables capabilities like autoneg and 10Mbps support. AQR115c as per the Marvell databook supports speeds up to 2.5Gbps with autonegotiation. Patch 2:- Remove the use of phy_set_max_speed in phy driver as the function is mainly used in MAC driver to set the max speed. Instead use get_features to fix up Phy PMA capabilities for AQR111, AQR111B0, AQR114C and AQCS109 ==================== Link: https://patch.msgid.link/20241001224626.2400222-1-quic_abchauha@quicinc.comSigned-off-by:
-
Abhishek Chauhan authored
Remove the use of phy_set_max_speed in phy driver as the function is mainly used in MAC driver to set the max speed. Instead use get_features to fix up Phy PMA capabilities for AQR111, AQR111B0, AQR114C and AQCS109 Fixes: 038ba1dc ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID") Fixes: 0974f1f0 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109") Fixes: c278ec64 ("net: phy: aquantia: add support for AQR114C PHY ID") Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/Signed-off-by:
Abhishek Chauhan <quic_abchauha@quicinc.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20241001224626.2400222-3-quic_abchauha@quicinc.comSigned-off-by:
-
Abhishek Chauhan authored
AQR115c reports incorrect PMA capabilities which includes 10G/5G and also incorrectly disables capabilities like autoneg and 10Mbps support. AQR115c as per the Marvell databook supports speeds up to 2.5Gbps with autonegotiation. Fixes: 0ebc581f ("net: phy: aquantia: add support for aqr115c") Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/Signed-off-by:
-
Sebastian Andrzej Siewior authored
Yury reported a crash in the sfc driver originated from netpoll_send_udp(). The netconsole sends a message and then netpoll invokes the driver's NAPI function with a budget of zero. It is dedicated to allow driver to free TX resources, that it may have used while sending the packet. In the netpoll case the driver invokes xdp_do_flush() unconditionally, leading to crash because bpf_net_context was never assigned. Invoke xdp_do_flush() only if budget is not zero. Fixes: 401cb7da ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.") Reported-by:
Yury Vostrikov <mon@unformed.ru> Closes: https://lore.kernel.org/5627f6d1-5491-4462-9d75-bc0612c26a22@app.fastmail.comSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241002125837.utOcRo6Y@linutronix.deSigned-off-by:
-
Ingo van Lil authored
When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. Fixes: a29de52b ("net: dp83869: Add ability to advertise Fiber connection") Signed-off-by:
Ingo van Lil <inguin@gmx.de> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241002161807.440378-1-inguin@gmx.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from ieee802154, bluetooth and netfilter. Current release - regressions: - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc - eth: am65-cpsw: fix forever loop in cleanup code Current release - new code bugs: - eth: mlx5: HWS, fixed double-free in error flow of creating SQ Previous releases - regressions: - core: avoid potential underflow in qdisc_pkt_len_init() with UFO - core: test for not too small csum_start in virtio_net_hdr_to_skb() - vrf: revert "vrf: remove unnecessary RCU-bh critical section" - bluetooth: - fix uaf in l2cap_connect - fix possible crash on mgmt_index_removed - dsa: improve shutdown sequence - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq - eth: ip_gre: fix drops of small packets in ipgre_xmit Previous releases - always broken: - core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size - core: fix tcp fraglist segmentation after pull from frag_list - netfilter: nf_tables: prevent nf_skb_duplicated corruption - sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start - mac802154: fix potential RCU dereference issue in mac802154_scan_worker - eth: fec: restart PPS after link state change" * tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits) sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems doc: net: napi: Update documentation for napi_schedule_irqoff net/ncsi: Disable the ncsi work before freeing the associated structure net: phy: qt2025: Fix warning: unused import DeviceId gso: fix udp gso fraglist segmentation after pull from frag_list bridge: mcast: Fail MDB get request on empty entry vrf: revert "vrf: Remove unnecessary RCU-bh critical section" net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code net: phy: realtek: Check the index value in led_hw_control_get ppp: do not assume bh is held in ppp_channel_bridge_input() selftests: rds: move include.sh to TEST_FILES net: test for not too small csum_start in virtio_net_hdr_to_skb() net: gso: fix tcp fraglist segmentation after pull from frag_list ipv4: ip_gre: Fix drops of small packets in ipgre_xmit net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check net: add more sanity checks to qdisc_pkt_len_init() net: avoid potential underflow in qdisc_pkt_len_init() with UFO net: ethernet: ti: cpsw_ale: Fix warning on some platforms net: microchip: Make FDMA config symbol invisible ... -
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: - small cleanup patches leveraging struct size to improve access bounds checking * tag 'v6.12-rc1-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: Use struct_size() to improve smb_direct_rdma_xmit() ksmbd: Annotate struct copychunk_ioctl_req with __counted_by_le() ksmbd: Use struct_size() to improve get_file_alternate_info()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfsLinus Torvalds authored
Pull vfs fixes from Christian Brauner: "vfs: - Ensure that iter_folioq_get_pages() advances to the next slot otherwise it will end up using the same folio with an out-of-bound offset. iomap: - Dont unshare delalloc extents which can't be reflinked, and thus can't be shared. - Constrain the file range passed to iomap_file_unshare() directly in iomap instead of requiring the callers to do it. netfs: - Use folioq_count instead of folioq_nr_slot to prevent an unitialized value warning in netfs_clear_buffer(). - Fix missing wakeup after issuing writes by scheduling the write collector only if all the subrequest queues are empty and thus no writes are pending. - Fix two minor documentation bugs" * tag 'vfs-6.12-rc2.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: iomap: constrain the file range passed to iomap_file_unshare iomap: don't bother unsharing delalloc extents netfs: Fix missing wakeup after issuing writes Documentation: add missing folio_queue entry folio_queue: fix documentation netfs: Fix a KMSAN uninit-value error in netfs_clear_buffer iov_iter: fix advancing slot in iter_folioq_get_pages() -
Xin Long authored
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] Fixes: 5e8f3f70 ("sctp: simplify sctp listening code") Reported-by: syzbot+f4e0f821e3a3b7cee51d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391.git.lucien.xin@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ravikanth Tuniki authored
Add missing reg minItems as based on current binding document only ethernet MAC IO space is a supported configuration. There is a bug in schema, current examples contain 64-bit addressing as well as 32-bit addressing. The schema validation does pass incidentally considering one 64-bit reg address as two 32-bit reg address entries. If we change axi_ethernet_eth1 example node reg addressing to 32-bit schema validation reports: Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb: ethernet@40000000: reg: [[1073741824, 262144]] is too short To fix it add missing reg minItems constraints and to make things clearer stick to 32-bit addressing in examples. Fixes: cbb1ca6d ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml") Signed-off-by:
Ravikanth Tuniki <ravikanth.tuniki@amd.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by:
-
Sean Anderson authored
Since commit 8380c81d ("net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT"), napi_schedule_irqoff will do the right thing if IRQs are threaded. Therefore, there is no need to use IRQF_NO_THREAD. Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h regarding flowtable hooks, from Phil Sutter. 2) Fix nft_audit.sh selftests with newer nft binaries, due to different (valid) audit output, also from Phil. 3) Disable BH when duplicating packets via nf_dup infrastructure, otherwise race on nf_skb_duplicated for locally generated traffic. From Eric. 4) Missing return in callback of selftest C program, from zhang jiao. netfilter pull request 24-10-02 * tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: Add missing return value netfilter: nf_tables: prevent nf_skb_duplicated corruption selftests: netfilter: Fix nft_audit.sh for newer nft binaries netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED ==================== Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.orgSigned-off-by:
-
Darrick J. Wong authored
File contents can only be shared (i.e. reflinked) below EOF, so it makes no sense to try to unshare ranges beyond EOF. Constrain the file range parameters here so that we don't have to do that in the callers. Fixes: 5f4e5752 ("fs: add iomap_file_dirty") Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20241002150213.GC21853@frogsfrogsfrogsReviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Christian Brauner <brauner@kernel.org>
-
Darrick J. Wong authored
If unshare encounters a delalloc reservation in the srcmap, that means that the file range isn't shared because delalloc reservations cannot be reflinked. Therefore, don't try to unshare them. Signed-off-by:
-
Eddie James authored
The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic. Fixes: 2d283bdd ("net/ncsi: Resource management") Signed-off-by:
Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20240925155523.1017097-1-eajames@linux.ibm.comSigned-off-by:
-
FUJITA Tomonori authored
Fix the following warning when the driver is compiled as built-in: warning: unused import: `DeviceId` --> drivers/net/phy/qt2025.rs:18:5 | 18 | DeviceId, Driver, | ^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default device_table in module_phy_driver macro is defined only when the driver is built as a module. Use phy::DeviceId in the macro instead of importing `DeviceId` since `phy` is always used. Fixes: fd3eaad8 ("net: phy: add Applied Micro QT2025 PHY driver") Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409190717.i135rfVo-lkp@intel.com/Reviewed-by:
Alice Ryhl <aliceryhl@google.com> Reviewed-by:
Trevor Gross <tmgross@umich.edu> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
Fiona Behrens <me@kloenk.dev> Acked-by:
Miguel Ojeda <ojeda@kernel.org> Link: https://patch.msgid.link/20240926121404.242092-1-fujita.tomonori@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Detect gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For UDP, this causes a NULL ptr deref in __udpv4_gso_segment_list_csum at udp_hdr(seg->next)->dest. Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/ Fixes: 9fd1ff5d ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Ido Schimmel authored
When user space deletes a port from an MDB entry, the port is removed synchronously. If this was the last port in the entry and the entry is not joined by the host itself, then the entry is scheduled for deletion via a timer. The above means that it is possible for the MDB get netlink request to retrieve an empty entry which is scheduled for deletion. This is problematic as after deleting the last port in an entry, user space cannot rely on a non-zero return code from the MDB get request as an indication that the port was successfully removed. Fix by returning an error when the entry's port list is empty and the entry is not joined by the host. Fixes: 68b380a3 ("bridge: mcast: Add MDB get support") Reported-by:
Jamie Bainbridge <jamie.bainbridge@gmail.com> Closes: https://lore.kernel.org/netdev/c92569919307749f879b9482b0f3e125b7d9d2e3.1726480066.git.jamie.bainbridge@gmail.com/Tested-by:
-
Willem de Bruijn authored
This reverts commit 504fc6f4. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...] Fixes: 504fc6f4 ("vrf: Remove unnecessary RCU-bh critical section") Link: https://lore.kernel.org/netdev/20240925185216.1990381-1-greearb@candelatech.com/Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240929061839.1175300-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Dan Carpenter authored
This error handling has a typo. It should i++ instead of i--. In the original code the error handling will loop until it crashes. Fixes: da70d184 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx") Signed-off-by:
Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/8e7960cc-415d-48d7-99ce-f623022ec7b5@stanley.mountainSigned-off-by:
-
Hui Wang authored
Just like rtl8211f_led_hw_is_supported() and rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also needs to check the index value, otherwise the caller is likely to get an incorrect rules. Fixes: 17784801 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Reviewed-by:
Marek Vasut <marex@denx.de> Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.comSigned-off-by:
-
Eric Dumazet authored
Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:119 dump_stack+0x1c/0x28 lib/dump_stack.c:128 print_usage_bug+0x698/0x9ac kernel/locking/lockdep.c:4000 mark_lock_irq+0x980/0xd2c mark_lock+0x258/0x360 kernel/locking/lockdep.c:4677 __lock_acquire+0xf48/0x779c kernel/locking/lockdep.c:5096 lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 ppp_async_process+0x98/0x150 drivers/net/ppp/ppp_async.c:495 tasklet_action_common+0x318/0x3f4 kernel/softirq.c:785 tasklet_action+0x68/0x8c kernel/softirq.c:811 handle_softirqs+0x2e4/0xbfc kernel/softirq.c:554 run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 smpboot_thread_fn+0x4b0/0x90c kernel/smpboot.c:164 kthread+0x288/0x310 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Reported-by: syzbot+bd8d55ee2acd0a71d8ce@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/66f661e2.050a0220.38ace9.000f.GAE@google.com/T/#uSigned-off-by: -
Hangbin Liu authored
The include.sh file is generated for inclusion and should not be executable. Otherwise, it will be added to kselftest-list.txt. Additionally, add the executable bit for test.py at the same time to ensure proper functionality. Fixes: 3ade6ce1 ("selftests: rds: add testing infrastructure") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.comSigned-off-by:
-
Eric Dumazet authored
syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 net/ipv4/ip_output.c:113) [ 67.891459] ? __pfx_ip_finish_output2 (net/ipv4/ip_output.c:200) [ 67.891470] ? ip_route_output_flow (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:96 (discriminator 13) ./include/linux/rcupdate.h:871 (discriminator 13) net/ipv4/route.c:2625 (discriminator 13) ./include/net/route.h:141 (discriminator 13) net/ipv4/route.c:2852 (discriminator 13)) [ 67.891484] ipvlan_process_v4_outbound (drivers/net/ipvlan/ipvlan_core.c:445 (discriminator 1)) [ 67.891581] ipvlan_queue_xmit (drivers/net/ipvlan/ipvlan_core.c:542 drivers/net/ipvlan/ipvlan_core.c:604 drivers/net/ipvlan/ipvlan_core.c:670) [ 67.891596] ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:227) [ 67.891607] dev_hard_start_xmit (./include/linux/netdevice.h:4916 ./include/linux/netdevice.h:4925 net/core/dev.c:3588 net/core/dev.c:3604) [ 67.891620] __dev_queue_xmit (net/core/dev.h:168 (discriminator 25) net/core/dev.c:4425 (discriminator 25)) [ 67.891630] ? skb_copy_bits (./include/linux/uaccess.h:233 (discriminator 1) ./include/linux/uaccess.h:260 (discriminator 1) ./include/linux/highmem-internal.h:230 (discriminator 1) net/core/skbuff.c:3018 (discriminator 1)) [ 67.891645] ? __pskb_pull_tail (net/core/skbuff.c:2848 (discriminator 4)) [ 67.891655] ? skb_partial_csum_set (net/core/skbuff.c:5657) [ 67.891666] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/skbuff.h:2791 (discriminator 3) ./include/linux/skbuff.h:2799 (discriminator 3) ./include/linux/virtio_net.h:109 (discriminator 3)) [ 67.891684] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 67.891700] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 67.891716] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 67.891734] ? do_sock_setsockopt (net/socket.c:2335) [ 67.891747] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 67.891761] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 67.891772] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 67.891785] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fixes: 9181d6f8 ("net: add more sanity check in virtio_net_hdr_to_skb()") Signed-off-by:
-
Felix Fietkau authored
Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn. Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/ Link: https://lore.kernel.org/netdev/20240922150450.3873767-1-willemdebruijn.kernel@gmail.com/ Fixes: bee88cd5 ("net: add support for segmenting TCP fraglist GSO packets") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
-
