- 17 Apr, 2020 20 commits
-
-
Andy Lutomirski authored
[ Upstream commit 630b99ab ] If AT_SYSINFO is not present, don't try to call a NULL pointer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.orgSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Michael Wang authored
[ Upstream commit 26cf5222 ] During our testing, we found a case that shares no longer working correctly, the cgroup topology is like: /sys/fs/cgroup/cpu/A (shares=102400) /sys/fs/cgroup/cpu/A/B (shares=2) /sys/fs/cgroup/cpu/A/B/C (shares=1024) /sys/fs/cgroup/cpu/D (shares=1024) /sys/fs/cgroup/cpu/D/E (shares=1024) /sys/fs/cgroup/cpu/D/E/F (shares=1024) The same benchmark is running in group C & F, no other tasks are running, the benchmark is capable to consumed all the CPUs. We suppose the group C will win more CPU resources since it could enjoy all the shares of group A, but it's F who wins much more. The reason is because we have group B with shares as 2, since A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus, so A->cfs_rq.load.weight become very small. And in calc_group_shares() we calculate shares as: load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg); shares = (tg_shares * load) / tg_weight; Since the 'cfs_rq->load.weight' is too small, the load become 0 after scale down, although 'tg_shares' is 102400, shares of the se which stand for group A on root cfs_rq become 2. While the se of D on root cfs_rq is far more bigger than 2, so it wins the battle. Thus when scale_load_down() scale real weight down to 0, it's no longer telling the real story, the caller will have the wrong information and the calculation will be buggy. This patch add check in scale_load_down(), so the real weight will be >= MIN_SHARES after scale, after applied the group C wins as expected. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.comSigned-off-by:
-
Sungbo Eo authored
[ Upstream commit 486562da ] Enclose the chained handler with chained_irq_{enter,exit}(), so that the muxed interrupts get properly acked. This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer interrupt is never acked. The kernel waits a clock tick forever in calibrate_delay_converge(), which leads to a boot hang. Fixes: c41b16f8 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code") Signed-off-by:
Sungbo Eo <mans0n@gorani.run> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.runSigned-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit e74d93e9 ] Field bdi->io_pages added in commit 9491ae4a ("mm: don't cap request size based on read-ahead setting") removes unneeded split of read requests. Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set limits of their devices by blk_set_stacking_limits() + disk_stack_limits(). Field bio->io_pages stays zero until user set max_sectors_kb via sysfs. This patch updates io_pages after merging limits in disk_stack_limits(). Commit c6d6e9b0 ("dm: do not allow readahead to limit IO size") fixed the same problem for device-mapper devices, this one fixes MD RAIDs. Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting") Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Thomas Hellstrom authored
[ Upstream commit 6db73f17 ] When SEV or SME is enabled and active, vm_get_page_prot() typically returns with the encryption bit set. This means that users of pgprot_modify(, vm_get_page_prot()) (mprotect_fixup(), do_mmap()) end up with a value of vma->vm_pg_prot that is not consistent with the intended protection of the PTEs. This is also important for fault handlers that rely on the VMA vm_page_prot to set the page protection. Fix this by not allowing pgprot_modify() to change the encryption bit, similar to how it's done for PAT bits. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20200304114527.3636-2-thomas_os@shipmail.orgSigned-off-by:
-
Mathias Nyman authored
[ Upstream commit 72ae1947 ] Bail out early if the xHC host needs to be reset at resume but driver can't access xHC PCI registers. If xhci driver already fails to reset the controller then there is no point in attempting to free, re-initialize, re-allocate and re-start the host. If failure to access the host is detected later, failing the resume, xhci interrupts will be double freed when remove is called. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-2-mathias.nyman@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alexey Dobriyan authored
[ Upstream commit ff770422 ] Steps to reproduce: BLKRESETZONE zone 0 // force EIO pwrite(fd, buf, 4096, 4096); [issue more IO including zone ioctls] It will start failing randomly including IO to unrelated zones because of ->error "reuse". Trigger can be partition detection as well if test is not run immediately which is even more entertaining. The fix is of course to clear ->error where necessary. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Alexey Dobriyan (SK hynix) <adobriyan@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 9b03b713 ] If null_add_dev() fails then null_del_dev() is called with a NULL argument. Make null_del_dev() handle this scenario correctly. This patch fixes the following KASAN complaint: null-ptr-deref in null_del_dev+0x28/0x280 [null_blk] Read of size 8 at addr 0000000000000000 by task find/1062 Call Trace: dump_stack+0xa5/0xe6 __kasan_report.cold+0x65/0x99 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 null_del_dev+0x28/0x280 [null_blk] nullb_group_drop_item+0x7e/0xa0 [null_blk] client_drop_item+0x53/0x80 [configfs] configfs_rmdir+0x395/0x4e0 [configfs] vfs_rmdir+0xb6/0x220 do_rmdir+0x238/0x2c0 __x64_sys_unlinkat+0x75/0x90 do_syscall_64+0x6f/0x2f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 2004bfde ] If null_add_dev() fails, clear dev->nullb. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk] Read of size 8 at addr ffff88803280fc30 by task check/8409 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x26/0x260 __kasan_report.cold+0x7b/0x99 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 nullb_device_submit_queues_store+0xcf/0x160 [null_blk] configfs_write_file+0x1c4/0x250 [configfs] __vfs_write+0x4c/0x90 vfs_write+0x145/0x2c0 ksys_write+0xd7/0x180 __x64_sys_write+0x47/0x50 do_syscall_64+0x6f/0x2f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff370926317 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317 RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001 RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001 R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002 R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0 Allocated by task 8409: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_kmalloc+0xd/0x10 kmem_cache_alloc_node_trace+0x129/0x4c0 null_add_dev+0x24a/0xe90 [null_blk] nullb_device_power_store+0x1b6/0x270 [null_blk] configfs_write_file+0x1c4/0x250 [configfs] __vfs_write+0x4c/0x90 vfs_write+0x145/0x2c0 ksys_write+0xd7/0x180 __x64_sys_write+0x47/0x50 do_syscall_64+0x6f/0x2f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 8409: save_stack+0x23/0x90 __kasan_slab_free+0x112/0x160 kasan_slab_free+0x12/0x20 kfree+0xdf/0x250 null_add_dev+0xaf3/0xe90 [null_blk] nullb_device_power_store+0x1b6/0x270 [null_blk] configfs_write_file+0x1c4/0x250 [configfs] __vfs_write+0x4c/0x90 vfs_write+0x145/0x2c0 ksys_write+0xd7/0x180 __x64_sys_write+0x47/0x50 do_syscall_64+0x6f/0x2f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 2984c868 ("nullb: factor disk parameters") Signed-off-by:
-
James Morse authored
[ Upstream commit 6ded0b61 ] SDEI has private events that must be registered on each CPU. When CPUs come and go they must re-register and re-enable their private events. Each event has flags to indicate whether this should happen to protect against an event being registered on a CPU coming online, while all the others are unregistering the event. These flags are protected by the sdei_list_lock spinlock, because the cpuhp callbacks can't take the mutex. Hibernate needs to unregister all events, but keep the in-memory re-register and re-enable as they are. sdei_unregister_shared() takes the spinlock to walk the list, then calls _sdei_event_unregister() on each shared event. _sdei_event_unregister() tries to take the same spinlock to update re-register and re-enable. This doesn't go so well. Push the re-register and re-enable updates out to their callers. sdei_unregister_shared() doesn't want these values updated, so doesn't need to do anything. This also fixes shared events getting lost over hibernate as this path made them look unregistered. Fixes: da351827 ("firmware: arm_sdei: Add support for CPU and system power states") Reported-by:
Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit c50cc6dc ] Some older MSM8916 Venus firmware versions also seem to indicate support for encoding HEVC, even though they really can't. This will lead to errors later because hfi_session_init() fails in this case. HEVC is already ignored for "dec_codecs", so add the same for "enc_codecs" to make these old firmware versions work correctly. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Christoph Niedermaier authored
[ Upstream commit 36eb7dc1 ] imx6ul_opp_check_speed_grading is called for both i.MX6UL and i.MX6ULL. Since the i.MX6ULL was introduced to a separate ocotp compatible node later, it is possible that the i.MX6ULL has also dtbs with "fsl,imx6ull-ocotp". On a system without nvmem-cell speed grade a missing check on this node causes a driver fail without considering the cpu speed grade. This patch prevents unwanted cpu overclocking on i.MX6ULL with compatible node "fsl,imx6ull-ocotp" in old dtbs without nvmem-cell speed grade. Fixes: 2733fb0d ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull") Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Alain Volmat authored
[ Upstream commit f491c668 ] Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by:
Alain Volmat <avolmat@me.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Xu Wang authored
[ Upstream commit bcaeb886 ] In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Raju Rangoju authored
[ Upstream commit 50e0d28d ] cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Luo bin authored
[ Upstream commit 0da7c322 ] the second input parameter of wait_for_completion_timeout should be jiffies instead of millisecond Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
[ Upstream commit 96758117 ] it's unreliable for fw to check whether IO is stopped, so driver wait for enough time to ensure IO process is done in hw before freeing resources Signed-off-by:
-
Zheng Wei authored
[ Upstream commit b317538c ] printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix, it causes a build error when there is no variable arguments(e.g. only fmt is specified.). Signed-off-by:
Zheng Wei <wei.zheng@vivo.com> Signed-off-by:
-
Ondrej Jirman authored
[ Upstream commit a43ab30d ] When doing a 16-bit read that returns data in the MSB byte, the RSB_DATA register will keep the MSB byte unchanged when doing the following 8-bit read. sunxi_rsb_read() will then return a result that contains high byte from 16-bit read mixed with the 8-bit result. The consequence is that after this happens the PMIC's regmap will look like this: (0x33 is the high byte from the 16-bit read) % cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers 00: 33 01: 33 02: 33 03: 33 04: 33 05: 33 06: 33 07: 33 08: 33 09: 33 0a: 33 0b: 33 0c: 33 0d: 33 0e: 33 [snip] Fix this by masking the result of the read with the correct mask based on the size of the read. There are no 16-bit users in the mainline kernel, so this doesn't need to get into the stable tree. Signed-off-by:
Ondrej Jirman <megous@megous.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Ondrej Jirman authored
[ Upstream commit a4055095 ] Lowering the voltage solves the quick image degradation over time (minutes), that was probably caused by overheating. Signed-off-by:
-
- 13 Apr, 2020 20 commits
-
-
Greg Kroah-Hartman authored
-
Rob Clark authored
commit 3de433c5 upstream. [subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc73 (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by:
Rob Clark <robdclark@chromium.org> [seanpaul changed subject to something more desriptive] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com Cc: nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by:
-
Hans Verkuil authored
commit a4c30a48 upstream. When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the result is wrong due to a missing idx increment. This was never noticed since DP_REMOTE_DPCD_READ is currently not used, but if you enable it, then it is all wrong. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nlSigned-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Roger Quadros authored
commit c09b73cf upstream. This reverts commit 6a4290cc ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.") We don't yet support any of the OTG mechanisms (HNP/SRP/ADP) and are not setting gadget->otg_caps, so don't set gadget->is_otg flag. If we do then we end up publishing a OTG1.0 descriptor in the gadget descriptor which causes device enumeration to fail if we are connected to a host with CONFIG_USB_OTG enabled. Host side log without this patch [ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port [ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd [ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port [ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.253606] usb usb1-port1: attempt power cycle [ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd [ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd [ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.493532] usb usb1-port1: unable to enumerate USB device Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Chris Lew authored
commit f0beb4ba upstream. It is possible for the chunk sizes coming from the non RPM remote procs to not be word aligned. Remove the alignment warning and continue to read from the FIFO so execution is not stalled. Signed-off-by:
Chris Lew <clew@codeaurora.org> Signed-off-by:
Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Arun KS authored
commit 61cf61d8 upstream. __early_cpu_boot_status is of type long. Use quad assembler directive to allocate proper size. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Arun KS <arunks@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Rob Clark authored
commit 0036bc73 upstream. Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Taniya Das authored
commit 21ea4b62 upstream. In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Qiujun Huang authored
commit b139f8b0 upstream. Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated. syzkaller report: https://lkml.org/lkml/2020/3/27/403 general protection fault, probably for non-canonical address 0xdffffc000000006c: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367] RIP: 0010:fbcon_switch+0x28f/0x1740 drivers/video/fbdev/core/fbcon.c:2260 Call Trace: redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008 vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295 fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219 visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062 do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542 do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122 do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588 fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259 do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline] register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832 dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735 usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374 accessing vc_cons[logo_shown].d->vc_top causes the bug. Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.comSigned-off-by:
-
Avihai Horon authored
commit 987914ab upstream. After a successful allocation of path_rec, num_paths is set to 1, but any error after such allocation will leave num_paths uncleared. This causes to de-referencing a NULL pointer later on. Hence, num_paths needs to be set back to 0 if such an error occurs. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0 Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6 14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffff88006586f980 EFLAGS: 00010207 RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475 RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72 R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30 R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200 FS: 00000000016fc880(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_copy_path_rec_from_user+0xcc0/0xcc0 ? __mutex_unlock_slowpath+0xfc/0x670 ? wait_for_completion+0x3b0/0x3b0 ? ucma_query_route+0x818/0xc60 ucma_query_route+0x818/0xc60 ? ucma_listen+0x1b0/0x1b0 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 ? ucma_listen+0x1b0/0x1b0 ? ucma_write+0x292/0x460 ucma_write+0x292/0x460 ? ucma_close_id+0x60/0x60 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 __vfs_write+0xf7/0x620 ? ucma_close_id+0x60/0x60 ? kernel_read+0x110/0x110 ? time_hardirqs_on+0x19/0x580 ? lock_acquire+0x18b/0x3a0 ? finish_task_switch+0xf3/0x5d0 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1be/0x5d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? security_file_permission+0x172/0x1e0 vfs_write+0x192/0x460 ksys_write+0xc6/0x1a0 ? __ia32_sys_read+0xb0/0xb0 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? do_syscall_64+0x1d/0x470 do_syscall_64+0x9e/0x470 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3c86aa70 ("RDMA/cm: Add RDMA CM support for IBoE devices") Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.orgSigned-off-by:
Avihai Horon <avihaih@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Qiujun Huang authored
commit 71811cac upstream. Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't increase dlc->refcnt. Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Jason Gunthorpe authored
commit 32ac9e43 upstream. This lock ordering only happens when bonding is enabled and a certain bonding related event fires. However, since it can happen this is a global restriction on lock ordering. Teach lockdep about the order directly and unconditionally so bugs here are found quickly. See https://syzkaller.appspot.com/bug?extid=55de90ab5f44172b0c90 Link: https://lore.kernel.org/r/20200227203651.GA27185@ziepe.caSigned-off-by:
-
Jason Gunthorpe authored
commit 7c119107 upstream. The rdma_cm must be used single threaded. This appears to be a bug in the design, as it does have lots of locking that seems like it should allow concurrency. However, when it is all said and done every single place that uses the cma_exch() scheme is broken, and all the unlocked reads from the ucma of the cm_id data are wrong too. syzkaller has been finding endless bugs related to this. Fixing this in any elegant way is some enormous amount of work. Take a very big hammer and put a mutex around everything to do with the ucma_context at the top of every syscall. Fixes: 75216638 ("RDMA/cma: Export rdma cm interface to userspace") Link: https://lore.kernel.org/r/20200218210432.GA31966@ziepe.ca Reported-by: syzbot+adb15cf8c2798e4e0db4@syzkaller.appspotmail.com Reported-by: syzbot+e5579222b6a3edd96522@syzkaller.appspotmail.com Reported-by: syzbot+4b628fcc748474003457@syzkaller.appspotmail.com Reported-by: syzbot+29ee8f76017ce6cf03da@syzkaller.appspotmail.com Reported-by: syzbot+6956235342b7317ec564@syzkaller.appspotmail.com Reported-by: syzbot+b358909d8d01556b790b@syzkaller.appspotmail.com Reported-by: syzbot+6b46b135602a3f3ac99e@syzkaller.appspotmail.com Reported-by: syzbot+8458d13b13562abf6b77@syzkaller.appspotmail.com Reported-by: syzbot+bd034f3fdc0402e942ed@syzkaller.appspotmail.com Reported-by: syzbot+c92378b32760a4eef756@syzkaller.appspotmail.com Reported-by: syzbot+68b44a1597636e0b342c@syzkaller.appspotmail.com Signed-off-by:
-
Ilya Dryomov authored
commit b27a939e upstream. syzbot reported that 4fbc0c71 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c71 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
-
Xiubo Li authored
commit 4fbc0c71 upstream. It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
-
Kaike Wan authored
commit 5c15abc4 upstream. When the hfi1 driver is unloaded, kmemleak will report the following issue: unreferenced object 0xffff8888461a4c08 (size 8): comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s) hex dump (first 8 bytes): 73 64 6d 61 30 00 ff ff sdma0... backtrace: [<00000000311a6ef5>] kvasprintf+0x62/0xd0 [<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90 [<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0 [<00000000346fe72b>] 0xffffffffa0c5ecba [<000000006cfc5819>] 0xffffffffa0c866b9 [<0000000031c65580>] 0xffffffffa0c38e87 [<00000000e9739b3f>] local_pci_probe+0x41/0x80 [<000000006c69911d>] work_for_cpu_fn+0x16/0x20 [<00000000601267b5>] process_one_work+0x171/0x380 [<0000000049a0eefa>] worker_thread+0x1d1/0x3f0 [<00000000909cf2b9>] kthread+0xf8/0x130 [<0000000058f5f874>] ret_from_fork+0x35/0x40 This patch fixes the issue by: - Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs(). - This will fix the memory leak. - Calling kobject_put() to unwind operations only for those entries in dd->per_sdma[] whose operations have succeeded (including the current one that has just failed) in hfi1_verbs_register_sysfs(). Cc: <stable@vger.kernel.org> Fixes: 0cb2aa69 ("IB/hfi1: Add sysfs interface for affinity setup") Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Kaike Wan authored
commit dfb5394f upstream. When kobject_init_and_add() returns an error in the function hfi1_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.comReviewed-by:
-
Paul Cercueil authored
commit 9401d5aa upstream. The 4-bit divider value was written at offset 8, while the jz4740 programming manual locates it at offset 0. Fixes: 26b0aad8 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.netSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Kaiser authored
commit 47a1f8e8 upstream. Make sure that the rngc interrupt is masked if the rngc self test fails. Self test failure means that probe fails as well. Interrupts should be masked in this case, regardless of the error. Cc: stable@vger.kernel.org Fixes: 1d544944 ("hwrng: mx-rngc - add a driver for Freescale RNGC") Reviewed-by:
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Ahern authored
commit 4054ab64 upstream. A recent change to the netlink code: 6e237d09 ("netlink: Relax attr validation for fixed length types") logs a warning when programs send messages with invalid attributes (e.g., wrong length for a u32). Yafang reported this error message for tools/accounting/getdelays.c. send_cmd() is wrongly adding 1 to the attribute length. As noted in include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload length, so drop the +1. Fixes: 9e06d3f9 ("per task delay accounting taskstats interface: documentation fix") Reported-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
