- 18 Mar, 2015 1 commit
-
-
Keith Packard authored
Hardware random number quality is measured from 0 (no entropy) to 1024 (perfect entropy). Allow hardware devices to assert the full range by truncating the device-provided value at 1024 instead of 1023. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 17 Mar, 2015 3 commits
-
-
Herbert Xu authored
crypto: img-hash - Add missing semicolon to fix build error There is a missing semicolon after MODULE_DEVICE_TABLE. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Andre Wolokita authored
omap4_rng_init() checks bit 10 of the RNG_CONFIG_REG to determine whether the RNG is already running before performing any initiliasation. This is not the correct register to check, as the enable bit is in RNG_CONFIG_CONTROL. Read from RNG_CONTROL_REG instead. Signed-off-by: Andre Wolokita <Andre.Wolokita@analog.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Andre Wolokita authored
In omap4_rng_init(), a check of bit 10 of the RNG_CONFIG_REG is done to determine whether the RNG is running. This is suspicious firstly due to the use of RNG_CONTROL_ENABLE_TRNG_MASK and secondly because the same mask is written to RNG_CONTROL_REG after configuration of the FROs. Similar suspicious logic is repeated in omap4_rng_cleanup() when RNG_CONTROL_REG masked with RNG_CONTROL_ENABLE_TRNG_MASK is read, the same mask bit is cleared, and then written to RNG_CONFIG_REG. Unless the TRNG is enabled with one bit in RNG_CONTROL and disabled with another in RNG_CONFIG and these bits are mirrored in some way, I believe that the TRNG is not really shutting off. Apart from the strange logic, I have reason to suspect that the OMAP4 related code in this driver is driving an Inside Secure IP hardware RNG and strongly suspect that bit 10 of RNG_CONFIG_REG is one of the bits configuring the sampling rate of the FROs. This option is by default set to 0 and is not being set anywhere in omap-rng.c. Reading this bit during omap4_rng_init() will always return 0. It will remain 0 because ~(value of TRNG_MASK in control) will always be 0, because the TRNG is never shut off. This is of course presuming that the OMAP4 features the Inside Secure IP. I'm interested in knowing what the guys at TI think about this, as only they can confirm or deny the detailed structure of these registers. Signed-off-by: Andre Wolokita <Andre.Wolokita@analog.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 16 Mar, 2015 10 commits
-
-
Ameen Ali authored
fixing a syntax-error . Signed-off-by: Ameen Ali <AmeenAli023@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
Due to the change to RNGs to always return zero in success case, the RNG interface must zeroize the buffer with the length provided by the caller. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
James Hartley authored
This adds the binding documentation for the Imagination Technologies hash accelerator that provides hardware acceleration for SHA1/SHA224/SHA256/MD5 hashes. This hardware will be present in the upcoming pistachio SoC. Signed-off-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
James Hartley authored
This adds support for the Imagination Technologies hash accelerator which provides hardware acceleration for SHA1 SHA224 SHA256 and MD5 hashes. Signed-off-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
This allows us to get rid of driver's remove() method. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
Instead of using static hwrng structure that is reused between binds/unbinds of the device let's embed it into driver's private structure that we allocate. This way we are guaranteed not to stumble onto something left from previous bind attempt. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
This allows us to get rid of remove() method. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
This allows us to get rid of remove() method. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
This change converts bcm63xx-rng to use devm* API for managing all resources, which allows us to dispense with the rest of error handling path and remove() function. Also we combine hwern and driver-private data into a single allocation, use clk_prepare_enable() instead of "naked" clk_enable() and move clock enabling/disabling into hwrnd inti(0 and cleanup() methods so the clock stays off until rng is used. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
This change adds devm_hwrng_register and devm_hwrng_unregister which use can simplify error unwinding and unbinding code paths in device drivers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 13 Mar, 2015 2 commits
-
-
Julia Lawall authored
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL_GPL; @@ -EXPORT_SYMBOL_GPL(f); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
Due to the change to RNGs to always return zero in success case, the invocation of the RNGs in the test manager must be updated as otherwise the RNG self tests are not properly executed any more. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Alexander Bergmann <abergmann@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 12 Mar, 2015 7 commits
-
-
Herbert Xu authored
crypto: vmx - Fix assembler perl to use _GLOBAL Rather than doing things by hand for global symbols to deal with different calling conventions we already have a macro _GLOBAL in Linux to handle this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Guenter Roeck <linux@roeck-us.net>
-
Dmitry Torokhov authored
Instead of using #ifdefs let's mark suspend and resume methods as __maybe_unused which will suppress compiler warnings about them being unused and provide better compile coverage. Because SIMPLE_DEV_PM_OPS() produces an empty omap_rng_pm structure in case of !CONFIG_PM_SLEEP neither omap_rng_suspend nor omap_rng_resume will end up being referenced and the change will not result in increasing image size. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This implements the GHASH hash algorithm (as used by the GCM AEAD chaining mode) using the AArch32 version of the 64x64 to 128 bit polynomial multiplication instruction (vmull.p64) that is part of the ARMv8 Crypto Extensions. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This implements the ECB, CBC, CTR and XTS asynchronous block ciphers using the AArch32 versions of the ARMv8 Crypto Extensions for AES. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This implements the SHA-224/256 secure hash algorithm using the AArch32 versions of the ARMv8 Crypto Extensions for SHA2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This implements the SHA1 secure hash algorithm using the AArch32 versions of the ARMv8 Crypto Extensions for SHA1. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This moves all Kconfig symbols defined in crypto/Kconfig that depend on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is where the code that implements those features resides as well. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 11 Mar, 2015 6 commits
-
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be bound and unbound from the driver via sysfs, so we should not be using __init/__exit annotations on probe() and remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
PCI bus is hot-pluggable, and even if it wasn't one can still unbind the device from driver via sysfs, so we should not make driver's remove method as __exit. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Similarly probe() methods should not be marked __init unless platform_driver_probe() is used. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geant? authored
Commit 5be4d4c9 ("crypto: replace scatterwalk_sg_next with sg_next") did not consider the fact that scatterwalk_sg_next() was looking at sg entry length, while sg_next() looks at the "chained" sg bit. This should have no effect in theory. However in practice, there are cases where the sg table is initialized to a number of entries and some of them are not properly configured. While scatterwalk_sg_next() would have returned NULL (since sg length = 0 and sg page_link = 0), sg_next() happily returns the next unconfigured sg entry. insmod tcrypt.ko mode=500 sec=1 testing speed of async cbc(aes) (cbc-aes-talitos) encryption test 0 (128 bit key, 16 byte blocks): Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc00d79e4 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P1022 DS Modules linked in: tcrypt(+) talitos CPU: 0 PID: 2670 Comm: insmod Not tainted 4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209 #1 task: e8de3200 ti: e70bc000 task.ti: e70bc000 NIP: c00d79e4 LR: f92d223c CTR: c00d79c8 REGS: e70bda00 TRAP: 0300 Not tainted (4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209) MSR: 00029000 <CE,EE,ME> CR: 84428f22 XER: 00000000 DEAR: 00000000 ESR: 00000000 GPR00: f92d223c e70bdab0 e8de3200 00000000 e70bdbb8 00000001 00000000 00000000 GPR08: 00000000 00000000 c08b0380 27282010 c00d79c8 1003a634 00000000 e70bdf1c GPR16: e70bdef0 00000020 00000000 c08c0000 00000010 00000000 e70bdbb8 00000010 GPR24: e976d3a8 00000010 00000000 e70bdbd8 e8961010 00000001 c086e560 00000000 NIP [c00d79e4] page_address+0x1c/0x110 LR [f92d223c] talitos_map_sg+0x130/0x184 [talitos] Call Trace: [e70bdab0] [00000010] 0x10 (unreliable) [e70bdad0] [f92d223c] talitos_map_sg+0x130/0x184 [talitos] [e70bdb00] [f92d30d8] common_nonsnoop.constprop.13+0xc0/0x304 [talitos] [e70bdb30] [f933fd90] test_acipher_speed+0x434/0x7dc [tcrypt] [e70bdcc0] [f934318c] do_test+0x2478/0x306c [tcrypt] [e70bdd80] [f11fe058] tcrypt_mod_init+0x58/0x100 [tcrypt] [e70bdda0] [c0002354] do_one_initcall+0x90/0x1f4 [e70bde10] [c061fe00] do_init_module+0x60/0x1ac [e70bde30] [c00a79f0] load_module+0x185c/0x1f88 [e70bdee0] [c00a82b0] SyS_finit_module+0x7c/0x98 [e70bdf40] [c000e8b0] ret_from_syscall+0x0/0x3c Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 10 Mar, 2015 7 commits
-
-
Aaro Koskinen authored
Enable user to select OCTEON SHA1/256/512 modules. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Add OCTEON SHA512 module. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Add OCTEON SHA256 module. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Add OCTEON SHA1 module. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Add instruction definitions for SHA1/256/512. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Always disable preemption on behalf of the drivers when crypto engine is taken into use. This will simplify the usage. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Aaro Koskinen authored
Don't disable bottom half while the crypto engine is in use, as it should be unnecessary: All kernel crypto engine usage is wrapped with crypto engine state save/restore, so if we get interrupted by softirq that uses crypto they should save and restore our context. This actually fixes an issue when running OCTEON MD5 with interrupts disabled (tcrypt mode=302). There's a WARNING because the module is trying to enable the bottom half with irqs disabled: [ 52.656610] ------------[ cut here ]------------ [ 52.661439] WARNING: CPU: 1 PID: 428 at /home/aaro/git/linux/kernel/softirq.c:150 __local_bh_enable_ip+0x9c/0xd8() [ 52.671780] Modules linked in: tcrypt(+) [...] [ 52.763539] [<ffffffff8114082c>] warn_slowpath_common+0x94/0xd8 [ 52.769465] [<ffffffff81144614>] __local_bh_enable_ip+0x9c/0xd8 [ 52.775390] [<ffffffff81119574>] octeon_md5_final+0x12c/0x1e8 [ 52.781144] [<ffffffff81337050>] shash_compat_digest+0xd0/0x1b0 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 09 Mar, 2015 4 commits
-
-
Kim Phillips authored
The current cryptodev-2.6 tree commits: d9850fc5 ("crypto: powerpc/sha1 - kernel config") 50ba29aa ("crypto: powerpc/sha1 - glue") failed to properly place files under arch/powerpc/crypto, which leads to build errors: make[1]: *** No rule to make target 'arch/powerpc/crypto/sha1-spe-asm.o', needed by 'arch/powerpc/crypto/sha1-ppc-spe.o'. Stop. make[1]: *** No rule to make target 'arch/powerpc/crypto/sha1_spe_glue.o', needed by 'arch/powerpc/crypto/sha1-ppc-spe.o'. Stop. Makefile:947: recipe for target 'arch/powerpc/crypto' failed Move the two sha1 spe files under crypto/, and whilst there, rename other powerpc crypto files with underscores to use dashes for consistency. Cc: Markus Stockhausen <stockhausen@collogia.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Feng Kan authored
This adds ACPI support for APM X-Gene RNG unit. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The file Documentation/DocBook/crypto-API.tmpl documents the kernel crypto API and is maintained. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The patch moves the information provided in Documentation/crypto/crypto-API-userspace.txt into a separate chapter in the kernel crypto API DocBook. Some corrections are applied (such as removing a reference to Netlink when the AF_ALG socket is referred to). In addition, the AEAD and RNG interface description is now added. Also, a brief description of the zero-copy interface with an example code snippet is provided. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-