This pacth fixes the parsing of the eee_timer driver parameter.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The original code was generating an lsl instructions using the value
of ARM_R8 (skb_headlen, possibly uninitialized if no skb_headlen
access was required) as a shift amount.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Mircea Gherzan <mgherzan@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the credit timer is left armed after calling
xen_netbk_remove_xenvif(), then it may fire and attempt to schedule
the vif which will then oops as vif->netbk == NULL.

This may happen both in the fatal error path and during normal
disconnection from the front end.

The sequencing during shutdown is critical to ensure that: a)
vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif
is not freed.

1. Mark as unschedulable (netif_carrier_off()).
2. Synchronously cancel the timer.
3. Remove the vif from the schedule list.
4. Remove it from it netback thread group.
5. Wait for vif->refcnt to become 0.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

netbk_count_requests() could detect an error, call
netbk_fatal_tx_error() but return 0.  The vif may then be used
afterwards (e.g., in a call to netbk_tx_error().

Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may
be freed immediately after the call to netbk_fatal_tx_error() (e.g.,
if the vif is also removed).

Netback thread              Xenwatch thread
-------------------------------------------
netbk_fatal_tx_err()        netback_remove()
                              xenvif_disconnect()
                                ...
                                free_netdev()
netbk_tx_err() Oops!
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains three Netfilter fixes, they are:

* Fix conntrack helper re-assignment after NAT mangling if only if
  the same helper is attached to the conntrack again, from Florian
  Westphal.

* Don't allow the creation of conntrack entries via ctnetlink if the
  original and reply tuples are missing, from Florian Westphal.

* Fix broken sysctl interface in nf_ct_reasm while adding netns support
  to it, from Michal Kubecek.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit bd329e12 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices")
added a test for a CDC MBIM altsetting, implementing the cdc_ncm part of
MBIM backward compatibility support.  This intentionally made the driver
behave differently for CDC NCM devices with 2 alternate settings for the
Communication interface, depending on whether or not CONFIG_USB_NET_CDC_MBIM
was enabled.  This is correct iff alternate setting #1 really *is* a MBIM
setting.  If not, then NCM probing will use a different altsetting than before,
possibly causing probing failures depending on CONFIG_USB_NET_CDC_MBIM.

Fix by setting the altsetting back to default after the test, restoring the
previous behaviour for non MBIM devices.

This bug causes probing of Huawei E3276 devices to fail when the MBIM driver
is enabled, because these devices have a second alternate setting with no CDC
functional descriptors.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@stericsson.com>
Reported-and-tested-by: Jonathan A. <yo.natan@hotmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "This is primarily to get those r8169 reverts sorted, but other fixes
  have accumulated meanwhile.

   1) Revert two r8169 changes to fix suspend/resume for some users,
      from Francois Romieu.

   2) PCI dma mapping errors in atl1c are not checked for and this cause
      hard crashes for some users, from Xiong Huang.

   3) In 3.8.x we merged the removal of the EXPERIMENTAL dependency for
      'dlm' but the same patch for 'sctp' got lost somewhere, resulting
      in the potential for build errors since there are cross
      dependencies.  From Kees Cook.

   4) SCTP's ipv6 socket route validation makes boolean tests
      incorrectly, fix from Daniel Borkmann.

   5) mac80211 does sizeof(ptr) instead of (sizeof(ptr) * nelem), from
      Cong Ding.

   6) arp_rcv() can crash on shared non-linear packets, from Eric
      Dumazet.

   7) Avoid crashes in macvtap by setting ->gso_type consistently in
      ixgbe, qlcnic, and bnx2x drivers.  From Michael S Tsirkin and
      Alexander Duyck.

   8) Trinity fuzzer spots infinite loop in __skb_recv_datagram(), fix
      from Eric Dumazet.

   9) STP protocol frames should use high packet priority, otherwise an
      overloaded bridge can get stuck.  From Stephen Hemminger.

  10) The HTB packet scheduler was converted some time ago to store
      internal timestamps in nanoseconds, but we don't convert back into
      psched ticks for the user during dumps.  Fix from Jiri Pirko.

  11) mwl8k channel table doesn't set the .band field properly,
      resulting in NULL pointer derefs.  Fix from Jonas Gorski.

  12) mac80211 doesn't accumulate channels properly during a scan so we
      can downgrade heavily to a much less desirable connection speed.
      Fix from Johannes Berg.

  13) PHY probe failure in stmmac can result in resource leaks and
      double MDIO registery later, from Giuseppe CAVALLARO.

  14) Correct ipv6 checksumming in ip6t_NPT netfilter module, also fix
      address prefix mangling, from YOSHIFUJI Hideaki."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  net, sctp: remove CONFIG_EXPERIMENTAL
  net: sctp: sctp_v6_get_dst: fix boolean test in dst cache
  batman-adv: Fix NULL pointer dereference in DAT hash collision avoidance
  net/macb: fix race with RX interrupt while doing NAPI
  atl1c: add error checking for pci_map_single functions
  htb: fix values in opt dump
  ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6
  net: fix infinite loop in __skb_recv_datagram()
  net: qmi_wwan: add Yota / Megafon M100-1 4g modem
  mwl8k: fix band for supported channels
  bridge: set priority of STP packets
  mac80211: fix channel selection bug
  arp: fix possible crash in arp_rcv()
  bnx2x: set gso_type
  qlcnic: set gso_type
  ixgbe: fix gso type
  stmmac: mdio register has to fail if the phy is not found
  stmmac: fix macro used for debugging the xmit
  Revert "r8169: enable internal ASPM and clock request settings".
  Revert "r8169: enable ALDPS for power saving".
  ...

Pull x86 fixes from Peter Anvin:
 "One (hopefully) last batch of x86 fixes.  You asked for the patch by
  patch justifications, so here they are:

      x86, MCE: Retract most UAPI exports

   This one unexports from userspace a bunch of definitions which should
   never have been exported.  We really don't want to create an
   accidental legacy here.

      x86, doc: Add a bootloader ID for OVMF

   This is a documentation-only patch, just recording the official
   assignment of a boot loader ID.

      x86: Do not leak kernel page mapping locations

   Security: avoid making it needlessly easy for user space to probe the
   kernel memory layout.

      x86/mm: Check if PUD is large when validating a kernel address

   Prevent failures using /proc/kcore when using 1G pages.

      x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems

   Works around a BIOS problem causing boot failures on affected hardware."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Check if PUD is large when validating a kernel address
  x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
  x86, doc: Add a bootloader ID for OVMF
  x86: Do not leak kernel page mapping locations
  x86, MCE: Retract most UAPI exports

Adjusting of data pointers in net/netfilter/nf_conntrack_frag6_*
sysctl table for other namespaces points to wrong netns_frags
structure and has reversed order of entries.

Problem introduced by commit c038a767 in 3.7-rc1
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We walk through the bind address list and try to get the best source
address for a given destination. However, currently, we take the
'continue' path of the loop when an entry is invalid (!laddr->valid)
*and* the entry state does not equal SCTP_ADDR_SRC (laddr->state !=
SCTP_ADDR_SRC).

Thus, still, invalid entries with SCTP_ADDR_SRC might not 'continue'
as well as valid entries with SCTP_ADDR_{NEW, SRC, DEL}, with a possible
false baddr and matchlen as a result, causing in worst case dst route
to be false or possibly NULL.

This test should actually be a '||' instead of '&&'. But lets fix it
and make this a bit easier to read by having the condition the same way
as similarly done in sctp_v4_get_dst.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An entry in DAT with the hashed position of 0 can cause a NULL pointer
dereference when the first entry is checked by batadv_choose_next_candidate.
This first candidate automatically has the max value of 0 and the max_orig_node
of NULL. Not checking max_orig_node for NULL in batadv_is_orig_node_eligible
will lead to a NULL pointer dereference when checking for the lowest address.

This problem was added in 785ea114
("batman-adv: Distributed ARP Table - create DHT helper functions").
Signed-off-by: Pau Koning <paukoning@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When interrupts are disabled, an RX condition can occur but
it is not reported when enabling interrupts again. We need to check
RSR and use napi_reschedule() if condition is met.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

it is reported that code hit DMA-API errors on 3.8-rc6+,
(see https://bugzilla.redhat.com/show_bug.cgi?id=908436, and
     https://bugzilla.redhat.com/show_bug.cgi?id=908550)

this patch just adds error handler for
    pci_map_single and skb_frag_dma_map.
Signed-off-by: xiong <xiong@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A user reported the following oops when a backup process reads
/proc/kcore:

 BUG: unable to handle kernel paging request at ffffbb00ff33b000
 IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110
 [...]

 Call Trace:
  [<ffffffff811b8aaa>] read_kcore+0x17a/0x370
  [<ffffffff811ad847>] proc_reg_read+0x77/0xc0
  [<ffffffff81151687>] vfs_read+0xc7/0x130
  [<ffffffff811517f3>] sys_read+0x53/0xa0
  [<ffffffff81449692>] system_call_fastpath+0x16/0x1b

Investigation determined that the bug triggered when reading
system RAM at the 4G mark. On this system, that was the first
address using 1G pages for the virt->phys direct mapping so the
PUD is pointing to a physical address, not a PMD page.

The problem is that the page table walker in kern_addr_valid() is
not checking pud_large() and treats the physical address as if
it was a PMD.  If it happens to look like pmd_none then it'll
silently fail, probably returning zeros instead of real data. If
the data happens to look like a present PMD though, it will be
walked resulting in the oops above.

This patch adds the necessary pud_large() check.

Unfortunately the problem was not readily reproducible and now
they are running the backup program without accessing
/proc/kcore so the patch has not been validated but I think it
makes sense.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.coM>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'autofs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into akpm

Pull hp parisc automounter fix from Helge Deller:
 "This unbreaks automounter support for the parisc architecture (and
  probably aarch64 as well).""

* 'autofs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)

Pull s390 regression fix from Martin Schwidefsky:
 "The recent fix for the s390 sched_clock() function uncovered yet
  another bug in s390_next_ktime which causes an endless loop in KVM.
  This regression should be fixed before v3.8.

  I keep the fingers crossed that this is the last one for v3.8."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/timer: avoid overflow when programming clock comparator

Pull m68knommu fix from Greg Ungerer:
 "This contains a single critical fix for the non-MMU m68k platforms.

  The change of the kernel exec code path has revealed a problem in the
  start thread code that causes crashing on boot.  This is the fix for
  it."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix trap on execing /bin/init

in htb_change_class() cl->buffer and cl->buffer are stored in ns.
So in dump, convert them back to psched ticks.

Note this was introduced by:
commit 56b765b7
    htb: improved accuracy at high rates

Please consider this for -net/-stable.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile into akpm

Pull tile bugfixes from Chris Metcalf:
 "This includes a variety of minor bug fixes, mostly to do with testing
  "make allyesconfig", "make allmodconfig", "make allnoconfig", inspired
  to Tejun Heo's observation about Kconfig.freezer not being included.

  The largest changes are just syntax changes removing the tile-specific
  use of a macro named INT_MASK, which is way too commonly redefined
  throughout driver code"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: tag some code with #ifdef CONFIG_COMPAT
  tile: fix memcpy_*io functions for allnoconfig
  tile: export a handful of symbols appropriately
  drm: fix compile failure by including <linux/swiotlb.h>
  tile: avoid defining INT_MASK macro in <arch/interrupts.h>
  tile: provide "screen_info" when enabling VT
  drivers/input/joystick/analog.c: enable precise timer
  tile: include kernel/Kconfig.freezer in tile Kconfig
  tile: remove an unused variable in copy_thread()

Pull ARM SoC fixes from Olof Johansson:
 "We had a number of fixes queued up, but taking a strict pass-through
  and weeding out any that either have been broken for a while, or are
  for platforms that need out-of-tree code to be useful anyway, or other
  fixes for problems that few users are likely to see in real life, only
  this short branch of patches remains.

  The three patches here are to make SMP boot work on the Calxeda
  platforms again.  Some of the rework for cpuids on 3.8 broke it (and
  it was discovered late, unfortunately)."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: highbank: mask cluster id from cpu_logical_map
  ARM: scu: mask cluster id from cpu_logical_map
  ARM: scu: add empty scu_enable for !CONFIG_SMP

The total number of low memory pages is determined as totalram_pages -
totalhigh_pages, so without this patch all CMA pageblocks placed in
highmem were accounted to low memory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We're forgetting to reenable local interrupts on an error path.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Josh Boyer <jwboyer@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The designed workflow for the caches in kmemcg is: register it with
memcg_register_cache() if kmemcg is already available or later on when a
new kmemcg appears at memcg_update_cache_sizes() which will handle all
caches in the system.  The caches created at boot time will be handled
by the later, and the memcg-caches as well as any system caches that are
registered later on by the former.

There is a bug, however, in memcg_register_cache: we correctly set up
the array size, but do not mark the cache as a root cache.

This means that allocations for any cache appearing late in the game
will see memcg->memcg_params->is_root_cache == false, and in particular,
trigger VM_BUG_ON(!cachep->memcg_params->is_root_cache) in
__memcg_kmem_cache_get.

The obvious fix is to include the missing assignment.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With commit 8e72033f ("thp: make MADV_HUGEPAGE check for
mm->def_flags") the VM_NOHUGEPAGE flag may be set on s390 in
mm->def_flags for certain processes, to prevent future thp mappings.
This would be overwritten by do_mlockall(), which sets it back to 0 with
an optional VM_LOCKED flag set.

To fix this, instead of overwriting mm->def_flags in do_mlockall(), only
the VM_LOCKED flag should be set or cleared.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e7e034e1 ("drivers/rtc/rtc-pl031.c: fix the missing operation
on enable") accidentally broke the ST variants of PL031.

The bit that is being poked as "clockwatch" enable bit for the ST
variants does the work of bit 0 on this variant.  Bit 0 is used for a
clock divider on the ST variants, and setting it to 1 will affect
timekeeping in a very bad way.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit (32f53760 netfilter: nf_ct_helper: disable automatic helper
re-assignment of different type) broke transparent proxy scenarios.

For example, initial helper lookup might yield "ftp" (dport 21),
while re-lookup after REDIRECT yields "ftp-2121".

This causes the autoassign code to toss the ftp helper, even
though these are just different instances of the same helper.

Change the test to check for the helper function address instead
of the helper address, as suggested by Pablo.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>

Userspace can cause kernel panic by not specifying orig/reply
tuple: kernel will create a tuple with random stack values.

Problem is that tuple.dst.dir will be random, too, which
causes nf_ct_tuplehash_to_ctrack() to return garbage.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>

John W. Linville says:

====================
Here is another handful of late-breaking fixes intended for the 3.8
stream...  Hopefully the will still make it! :-)

There are three mac80211 fixes pulled from Johannes:

"Here are three fixes still for the 3.8 stream, the fix from Cong Ding
for the bad sizeof (Stephen Hemminger had pointed it out before but I'd
promptly forgotten), a mac80211 managed-mode channel context usage fix
where a downgrade would never stop until reaching non-HT and a bug in
the channel determination that could cause invalid channels like HT40+
on channel 11 to be used."

Also included is a mwl8k fix that avoids an oops when using mwl8k
devices that only support the 5 GHz band.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The original fix that was applied for setting gso_type required more change
than necessary because it was assumed ixgbe does RSC on IPv6 frames and this
is not correct.  RSC is only supported with IPv4/TCP frames only.  As such we
can simplify the fix and avoid the unnecessary move of eth_type_trans.

The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix
to one line that sets gso_type to TCPV4 if the frame is RSC.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tommi was fuzzing with trinity and reported the following problem :

commit 3f518bf7 (datagram: Add offset argument to __skb_recv_datagram)
missed that a raw socket receive queue can contain skbs with no payload.

We can loop in __skb_recv_datagram() with MSG_PEEK mode, because
wait_for_packet() is not prepared to skip these skbs.

[   83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {}
(detected by 0, t=26002 jiffies, g=27673, c=27672, q=75)
[   83.541011] INFO: Stall ended before state dump start
[  108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847]
...
[  108.067010] Call Trace:
[  108.067010]  [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0
[  108.067010]  [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30
[  108.067010]  [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240
[  108.067010]  [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50
[  108.067010]  [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0
[  108.067010]  [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150
[  108.067010]  [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Interface layout:

 00 CD-ROM
 01 debug COM port
 02 AP control port
 03 modem
 04 usb-ethernet

Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=ea42 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "Three nouveau fixes, all user visible issues, and one radeon
  regression fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: enforce use of radeon_get_ib_value when reading user cmd
  drm/nouveau: add lockdep annotations
  drm/nv50/fb: Fix nullptr-deref on IGPs
  drm/nouveau: use different register to wait for secret scrubber

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

When ever parsing cmd buffer supplied by userspace we need to use
radeon_get_ib_value rather than directly accessing the ib as the user
cmd might not yet be copied into the ib thus the parser might read
value that does not correspond to what user is sending and possibly
allowing user to send malicious command undected.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The band field for the supported channels were left unpopulated, making
them default to 0 == IEEE80211_BAND_2GHZ, even for the 5GHz channels.

This resulted in null pointer accesses if anything tries to access
wiphy->bands[channel->band] of a 5GHz channel on 5GHz only cards, since
wiphy->bands[2GHZ] is NULL for them (e.g. cfg80211_chandef_usable does).

Example kernel OOPS:

[  665.669993] Unable to handle kernel NULL pointer dereference at virtual address 00000016
[  665.678194] pgd = c6d58000
[  665.680941] [00000016] *pgd=06f8a831, *pte=00000000, *ppte=00000000
[  665.687303] Internal error: Oops: 17 [#1]
(...)
[  666.116373] Backtrace:
[  666.118866] [<bf0368dc>] (cfg80211_chandef_usable+0x0/0x1bc [cfg80211]) from [<bf025e64>] (nl80211_leave_mesh+0x244/0x264 [cfg80211])
[  666.130919]  r7:c6d12100 r6:0000143c r5:c0611c48 r4:c0611b98
[  666.136668] [<bf025d84>] (nl80211_leave_mesh+0x164/0x264 [cfg80211]) from [<bf02634c>] (nl80211_remain_on_channel+0x2a0/0x358 [cfg80211])
[  666.149074]  r7:c6d12000 r6:c6d12000 r5:c6f4f368 r4:00000003
[  666.154814] [<bf0262ec>] (nl80211_remain_on_channel+0x240/0x358 [cfg80211]) from [<bf02ddb0>] (nl80211_set_wiphy+0x264/0x560 [cfg80211])
[  666.167150] [<bf02db4c>] (nl80211_set_wiphy+0x0/0x560 [cfg80211]) from [<c01f94e0>] (genl_rcv_msg+0x1b8/0x1f8)
[  666.177205] [<c01f9328>] (genl_rcv_msg+0x0/0x1f8) from [<c01f89a0>] (netlink_rcv_skb+0x58/0xb4)
[  666.185949] [<c01f8948>] (netlink_rcv_skb+0x0/0xb4) from [<c01f931c>] (genl_rcv+0x20/0x2c)
[  666.194251]  r6:c6f70780 r5:0000002c r4:c6f70780 r3:00000001
[  666.199973] [<c01f92fc>] (genl_rcv+0x0/0x2c) from [<c01f8418>] (netlink_unicast+0x154/0x1f4)
[  666.208449]  r4:c785ea00 r3:c01f92fc
[  666.212057] [<c01f82c4>] (netlink_unicast+0x0/0x1f4) from [<c01f8790>] (netlink_sendmsg+0x230/0x2b0)
[  666.221240] [<c01f8560>] (netlink_sendmsg+0x0/0x2b0) from [<c01cccf8>] (sock_sendmsg+0x90/0xa4)
[  666.229986] [<c01ccc68>] (sock_sendmsg+0x0/0xa4) from [<c01cdcb0>] (__sys_sendmsg+0x290/0x298)
[  666.238637]  r9:00000000 r8:c0611ec8 r6:0000002c r5:c0610000 r4:c0611f64
[  666.245411] [<c01cda20>] (__sys_sendmsg+0x0/0x298) from [<c01cf52c>] (sys_sendmsg+0x44/0x6c)
[  666.253897] [<c01cf4e8>] (sys_sendmsg+0x0/0x6c) from [<c00090a0>] (ret_fast_syscall+0x0/0x2c)
[  666.262460]  r6:00000000 r5:beeff96c r4:00000005
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Spanning Tree Protocol packets should have always been marked as
control packets, this causes them to get queued in the high prirority
FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge
gets overloaded and can't communicate. This is a long-standing bug back
to the first versions of Linux bridge.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a HP ProLiant DL980 G7 Server boots a regular kernel,
there will be intermittent lost interrupts which could
result in a hang or (in extreme cases) data loss.

The reason is that this system only supports x2apic physical
mode, while the kernel boots with a logical-cluster default
setting.

This bug can be worked around by specifying the "x2apic_phys" or
"nox2apic" boot option, but we want to handle this system
without requiring manual workarounds.

The BIOS sets ACPI_FADT_APIC_PHYSICAL in FADT table.
As all apicids are smaller than 255, BIOS need to pass the
control to the OS with xapic mode, according to x2apic-spec,
chapter 2.9.

Current code handle x2apic when BIOS pass with xapic mode
enabled:

When user specifies x2apic_phys, or FADT indicates PHYSICAL:

1. During madt oem check, apic driver is set with xapic logical
   or xapic phys driver at first.

2. enable_IR_x2apic() will enable x2apic_mode.

3. if user specifies x2apic_phys on the boot line, x2apic_phys_probe()
   will install the correct x2apic phys driver and use x2apic phys mode.
   Otherwise it will skip the driver will let x2apic_cluster_probe to
   take over to install x2apic cluster driver (wrong one) even though FADT
   indicates PHYSICAL, because x2apic_phys_probe does not check
   FADT PHYSICAL.

Add checking x2apic_fadt_phys in x2apic_phys_probe() to fix the
problem.
Signed-off-by: Stoney Wang <song-bo.wang@hp.com>
[ updated the changelog and simplified the code ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1360263182-16226-1-git-send-email-yinghai@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

When trying to connect to an AP that advertises HT but not
VHT, the mac80211 code erroneously uses the configuration
from the AP as is instead of checking it against regulatory
and local capabilities. This can lead to using an invalid
or even inexistent channel (like 11/HT40+).

Additionally, the return flags from downgrading must be
ORed together, to collect them from all of the downgrades.
Also clarify the message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>