- 22 Jul, 2011 15 commits
-
-
Eliot Blennerhassett authored
HPI Version is used to check for firmware compatibility. This version will accept 4.08.xx released firmware, and will also accept 4.09.xx beta firmware Signed-off-by:
Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Mute functionality was recently added to the DSP firmware Signed-off-by:
-
Eliot Blennerhassett authored
Add names corresponding to new HPI node types. Shorten some names so that constructed names don't overflow the maximum name length. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Because mutex is used in adapter struct defined here. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Fixes a sparse warning. Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Signed-off-by:
-
Eliot Blennerhassett authored
Subsystem requests don't have or need a valid adapter index. The adapter index is already checked further on, before it is used to index the adapters array. (Reverts 4a122c10) Signed-off-by:
-
Eliot Blennerhassett authored
Work towards moving the function into alsa common header. Signed-off-by:
-
Eliot Blennerhassett authored
The loader API has been revised so that OS specific data is kept local to hpidspcd.c, and the public API is unchanged across OSes. Signed-off-by:
-
Eliot Blennerhassett authored
Some cobranet control data would not fit in an original HPI message. Now that HPI is able to transfer larger messages, this special handling is no longer required. Signed-off-by:
-
Eliot Blennerhassett authored
Allow for up to 256 bytes of extra data on top of standard hpi request and response sizes. Signed-off-by:
-
Eliot Blennerhassett authored
Having a 'request message' makes more sense than a 'message message' Signed-off-by:
-
- 21 Jul, 2011 1 commit
-
-
David G Turner authored
Add support for Roland/BOSS BR-800 (0582:011e) to snd-usb-audio driver. This allows playback and recording, which has been tested and found to work. The third interface should be MIDI (MTC/SMPTE?) for DAW interface and is set as per ME-25, but this has not been tested. SDHC card access is already supported by usb-storage for Backup/Rhythm Editor/Wave Convertor mode which should not conflict with this. Signed-off-by:
David G Turner <dgturner@iee.org> Signed-off-by:
-
- 18 Jul, 2011 1 commit
-
-
Clemens Ladisch authored
Commit dd203fa9 (ALSA: virtuoso: remove non-working controls on Essence ST Deluxe) made it impossible to adjust the volume after the driver initialized it to muted. Ensure that those DACs that can be accessed with I2C are initialized to the same volume that is the reset default of the DAC without I2C. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.38+ <stable@kernel.org>
-
- 15 Jul, 2011 1 commit
-
-
Daniel T Chen authored
BugLink: https://bugs.launchpad.net/bugs/774895 The original reporter states that his volume keys do not change the desired Master and PCM mixer elements together, so apply the hp+mute led quirk for his PCI SSID. Reported-by: Jeffrey Finkelstein Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
- 14 Jul, 2011 1 commit
-
-
Takashi Iwai authored
It was obviously wrong, grr.... Signed-off-by:
-
- 12 Jul, 2011 2 commits
-
-
Guillaume Pellerin authored
This patch gives M-Audio Fast Track Pro and M-Audio Quattro quirks and endpoints to boot and setup those devices with special options (digital inputs and outputs, 24 bits mode, etc...). M-Audio Audiophile quirks are just adapted to match the new global M-Audio parameters. Special configurations can be then loaded through a modprobe conf file. For example, to set the 24 bits mode on the Fast Track Pro add /etc/modprobe.d/fast_track_pro.conf : options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x08 Here is a list of the possibilities in this example : http://files.parisson.com/debian/fast-track-pro.confSigned-off-by:Guillaume Pellerin <yomguy@parisson.com> Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 08 Jul, 2011 2 commits
-
-
Takashi Iwai authored
The drivers don't require the exclusive irqs. Let's fix the deprecated warnings. Signed-off-by: -
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
- 25 Jun, 2011 1 commit
-
-
Tim Blechmann authored
each device has a unique mac address, which can be used to distinguish multiple devices in the same machine. we therefore include the full mac address in the device shortname and the last 6 bytes in the device id. Signed-off-by:
Tim Blechmann <tim@klingt.org> Signed-off-by:
-
- 24 Jun, 2011 1 commit
-
-
Markus Bollinger authored
- add/fix comments and debug messages - fix incomplete matrix init - comment out creation of buggy lola_dest_gain_mixer controls - minor optimisations Signed-off-by:
Markus Bollinger <bollinger@digigram.com> Signed-off-by:
-
- 17 Jun, 2011 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The via driver spews warnigs like hda-codec: no NID for mapping control Independent HP:0:0 with some codecs because snd_hda_add_nid() is called with nid=0. This patch fixes it by skipping the call when no corresponding widget is found. Signed-off-by: -
Clemens Ladisch authored
Since commit 13882a82 (optimize iso queueing by setting wake only after the last packet), drivers are required to call fw_iso_context_queue_flush() after queueing a batch of packets. The missing call would have an effect only if the controller queue underruns, but then the DMA would stop completely. Signed-off-by:
-
Clemens Ladisch authored
Since commit f2b3614c (Don't check DMA time-out too shortly), drivers need no longer restrict their PCM period length to be shorter than 10 seconds. Signed-off-by:
-
- 16 Jun, 2011 2 commits
-
-
Torsten Schenk authored
Fixed remaining issues of the signedness bug discovered by Dan Carpenter. A check was remaining that tests if unsigned rt->rate is >= 0. Changed that so that rt->rate now consistently uses ARRAY_SIZE(rates) as invalid rate value and not -1. Signed-off-by:
Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by:
-
Harry Butterworth authored
This is a reworked patch from Creative to change the PLL code to address unreliable 44100Hz initialization. Signed-off-by:
Harry Butterworth <heb1001@gmail.com> Signed-off-by:
-
- 15 Jun, 2011 1 commit
-
-
Takashi Iwai authored
Add missing __devinit. Signed-off-by:
-
- 14 Jun, 2011 8 commits
-
-
Takashi Iwai authored
Kill tasklet usage in rawmidi core code. Use workq for the event callback instead of tasklet (which is used only in core/seq/seq_midi.c). Signed-off-by: -
Takashi Iwai authored
Instead of tasklet, use workq for handling the hw-volume control. This reduces lots of spinlocks. Signed-off-by: -
Takashi Iwai authored
-
Takashi Iwai authored
Signed-off-by: -
Takashi Iwai authored
The commit 2308f4ad missed static inline thus it resulted in multiple-definitions error at linking. Signed-off-by:
-
Harry Butterworth authored
ALSA: ctxfi: Implement a combined capabilities query method to replace multiple have_x query methods. Signed-off-by:
-
Harry Butterworth authored
Initialise model-specific DAC and ADC parts. Add controls for output and mic source selection. Rename some mixer controls according to ControlNames.txt. Remove Playback switches for Line-in and IEC958-in - these were controlling the input mute/unmute which affected capture too. Use the capture switches to control the input mute/unmute instead - it's less confusing. Initialise the WM8775 to invert the left-right clock to swap the left and right channels of the mic and aux input. Signed-off-by:
-
Jesper Juhl authored
We have a double-free bug in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload(). We already call release_firmware(fw) on line 258, so when we then do it again after usb6fire_fw_ezusb_write() returns <0, we have a double-free. Easily fixed by just removing the last call to release_firmware(). Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
