This implements basic XDP redirect support in mlx5 driver.

Notice that the ndo_xdp_xmit() is NOT implemented, because that API
need some changes that this patchset is working towards.

The main purpose of this patch is have different drivers doing
XDP_REDIRECT to show how different memory models behave in a cross
driver world.

Update(pre-RFCv2 Tariq): Need to DMA unmap page before xdp_do_redirect,
as the return API does not exist yet to to keep this mapped.

Update(pre-RFCv3 Saeed): Don't mix XDP_TX and XDP_REDIRECT flushing,
introduce xdpsq.db.redirect_flush boolian.

V9: Adjust for commit 121e8927 ("net/mlx5e: Refactor RQ XDP_TX indication")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Added red_drops stats. Inbound packets dropped by RED, buffer exhaustion
2. Included fcs_err, jabber_err, l2_err and frame_err errors under
   rx_errors
3. Included fifo_err, dmac_drop, red_drops, fw_err_pko, fw_err_link and
   fw_err_drop under rx_dropped
4. Included max_collision_fail, max_deferral_fail, total_collisions,
   fw_err_pko, fw_err_link, fw_err_drop and fw_err_pki under tx_dropped
5. Counting dma mapping errors
6. Added some firmware stats description and removed for some
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Acked-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This tracepoint was replaced by inet_sock_set_state in 563e0bb0 and not
used anywhere in the kernel anymore. Remove it.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
PCI: add two more values for PCIe Max_Read_Request_Size and initially use them in r8169 network driver

In r8169 network driver I stumbled across a magic number translating
to PCI MRRS size 4K. The PCI core is still missing constants for
values 2K and 4K (as defined in PCI standard).

So let's add these two constants and use the 4K constant in r8169.

Second patch depends on the first one, therefore both patches
preferrably should go through either PCI or netdev tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace magic number "0x5 << MAX_READ_REQUEST_SHIFT" with the
appropriate constant as defined in PCI core.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds missing values for the max read request size.
E.g. network driver r8169 uses a value of 4K.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Stop using hard-coded callbacks

This a starting point for a cleanup and re-organization of stmmac.

In this series we stop using hard-coded callbacks along the code and use
instead helpers which are defined in a single place ("hwif.h").

This brings several advantages:
	1) Less typing :)
	2) Guaranteed function pointer check
	3) More flexibility

By 2) we stop using the repeated pattern of:
	if (priv->hw->mac->some_func)
		priv->hw->mac->some_func(...)

I didn't check but I expect the final .ko will be bigger with this series
because *all* of function pointers are checked.

Anyway, I hope this can make the code more readable and more flexible now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch stmmac_mode_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.

No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch stmmac_hwtimestamp to generic Hardware Interface Helpers instead
of using hard-coded callbacks. This makes the code more readable and
more flexible.

No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch stmmac_ops to generic Hardware Interface Helpers instead of using
hard-coded callbacks. This makes the code more readable and more
flexible.

No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch stmmac_dma_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.

No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch stmmac_desc_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.

No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: add zero copy receive

This patch series add mmap() support to TCP sockets for RX zero copy.

While tcp_mmap() patch itself is quite small (~100 LOC), optimal support
for asynchronous mmap() required better SO_RCVLOWAT behavior, and a
test program to demonstrate how mmap() on TCP sockets can be used.

Note that mmap() (and associated munmap()) calls are adding more
pressure on per-process VM semaphore, so might not show benefit
for processus with high number of threads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a reference program showing how mmap() can be used
on TCP flows to implement receive zero copy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some networks can make sure TCP payload can exactly fit 4KB pages,
with well chosen MSS/MTU and architectures.

Implement mmap() system call so that applications can avoid
copying data without complex splice() games.

Note that a successful mmap( X bytes) on TCP socket is consuming
bytes, as if recvmsg() has been done. (tp->copied += X)

Only PROT_READ mappings are accepted, as skb page frags
are fundamentally shared and read only.

If tcp_mmap() finds data that is not a full page, or a patch of
urgent data, -EINVAL is returned, no bytes are consumed.

Application must fallback to recvmsg() to read the problematic sequence.

mmap() wont block,  regardless of socket being in blocking or
non-blocking mode. If not enough bytes are in receive queue,
mmap() would return -EAGAIN, or -EIO if socket is in a state
where no other bytes can be added into receive queue.

An application might use SO_RCVLOWAT, poll() and/or ioctl( FIONREAD)
to efficiently use mmap()

On the sender side, MSG_EOR might help to clearly separate unaligned
headers and 4K-aligned chunks if necessary.

Tested:

mlx4 (cx-3) 40Gbit NIC, with tcp_mmap program provided in following patch.
MTU set to 4168  (4096 TCP payload, 40 bytes IPv6 header, 32 bytes TCP header)

Without mmap() (tcp_mmap -s)

received 32768 MB (0 % mmap'ed) in 8.13342 s, 33.7961 Gbit,
  cpu usage user:0.034 sys:3.778, 116.333 usec per MB, 63062 c-switches
received 32768 MB (0 % mmap'ed) in 8.14501 s, 33.748 Gbit,
  cpu usage user:0.029 sys:3.997, 122.864 usec per MB, 61903 c-switches
received 32768 MB (0 % mmap'ed) in 8.11723 s, 33.8635 Gbit,
  cpu usage user:0.048 sys:3.964, 122.437 usec per MB, 62983 c-switches
received 32768 MB (0 % mmap'ed) in 8.39189 s, 32.7552 Gbit,
  cpu usage user:0.038 sys:4.181, 128.754 usec per MB, 55834 c-switches

With mmap() on receiver (tcp_mmap -s -z)

received 32768 MB (100 % mmap'ed) in 8.03083 s, 34.2278 Gbit,
  cpu usage user:0.024 sys:1.466, 45.4712 usec per MB, 65479 c-switches
received 32768 MB (100 % mmap'ed) in 7.98805 s, 34.4111 Gbit,
  cpu usage user:0.026 sys:1.401, 43.5486 usec per MB, 65447 c-switches
received 32768 MB (100 % mmap'ed) in 7.98377 s, 34.4296 Gbit,
  cpu usage user:0.028 sys:1.452, 45.166 usec per MB, 65496 c-switches
received 32768 MB (99.9969 % mmap'ed) in 8.01838 s, 34.281 Gbit,
  cpu usage user:0.02 sys:1.446, 44.7388 usec per MB, 65505 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SO_RCVLOWAT is properly handled in tcp_poll(), so that POLLIN is only
generated when enough bytes are available in receive queue, after
David change (commit c7004482 "tcp: Respect SO_RCVLOWAT in tcp_poll().")

But TCP still calls sk->sk_data_ready() for each chunk added in receive
queue, meaning thread is awaken, and goes back to sleep shortly after.

Tested:

tcp_mmap test program, receiving 32768 MB of data with SO_RCVLOWAT set to 512KB

-> Should get ~2 wakeups (c-switches) per MB, regardless of how many
(tiny or big) packets were received.

High speed (mostly full size GRO packets)

received 32768 MB (100 % mmap'ed) in 8.03112 s, 34.2266 Gbit,
  cpu usage user:0.037 sys:1.404, 43.9758 usec per MB, 65497 c-switches

received 32768 MB (99.9954 % mmap'ed) in 7.98453 s, 34.4263 Gbit,
  cpu usage user:0.03 sys:1.422, 44.3115 usec per MB, 65485 c-switches

Low speed (sender is ratelimited and sends 1-MSS at a time, so GRO is not helping)

received 22474.5 MB (100 % mmap'ed) in 6015.35 s, 0.0313414 Gbit,
  cpu usage user:0.05 sys:1.586, 72.7952 usec per MB, 44950 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not delay acks if there are not enough bytes
in receive queue to satisfy SO_RCVLOWAT.

Since [E]POLLIN event is not going to be generated, there is little
hope for a delayed ack to be useful.

In fact, delaying ACK prevents sender from completing
the transfer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Applications might use SO_RCVLOWAT on TCP socket hoping to receive
one [E]POLLIN event only when a given amount of bytes are ready in socket
receive queue.

Problem is that receive autotuning is not aware of this constraint,
meaning sk_rcvbuf might be too small to allow all bytes to be stored.

Add a new (struct proto_ops)->set_rcvlowat method so that a protocol
can override the default setsockopt(SO_RCVLOWAT) behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary check on update_lft variable in
addrconf_prefix_rcv_add_addr routine since it is always set to 0.
Moreover remove update_lft re-initialization to 0
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the interface is down, head/tail of the descriptor
ring address is set to 0 in netsec_netdev_stop().
But netsec hardware still keeps the previous descriptor
ring address, so there is inconsistency between driver
and hardware after interface is up at a later time.
To address this inconsistency, add netsec_reset_hardware()
when the interface is down.

In addition, to minimize the reset process,
add flag to decide whether driver loads the netsec microcode.
Even if driver resets the netsec hardware, netsec microcode
keeps resident on RAM, so it is ok we only load the microcode
at initialization.

This patch is critical for installation over network.
Signed-off-by: Masahisa KOJIMA <masahisa.kojima@linaro.org>
Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable TX-irq as well during ndo_open() as we can not count upon
RX to arrive early enough to trigger the napi. This patch is critical
for installation over network.

Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The usage of of_device_get_match_data() reduce the code size a bit.

Also, the only way to call mtk_probe() is to match an entry in
of_mtk_match[], so match cannot be NULL.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and
    GSO/LLTX properly. From Sabrina Dubroca.

 2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell.

 3) Don't uncompress in slip before rstate is initialized, from Tejaswi
    Tanikella.

 4) When using 1.x firmware on aquantia, issue a deinit before we
    hardware reset the chip, otherwise we break dirty wake WOL. From
    Igor Russkikh.

 5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi.

 6) Fix ethtool -x crashes in bnxt_en, from Michael Chan.

 7) Fix races in l2tp tunnel creation and duplicate tunnel detection,
    from Guillaume Nault.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  l2tp: fix race in duplicate tunnel detection
  l2tp: fix races in tunnel creation
  tun: send netlink notification when the device is modified
  tun: set the flags before registering the netdevice
  lan78xx: Don't reset the interface on open
  bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
  bnxt_en: Need to include RDMA rings in bnxt_check_rings().
  bnxt_en: Support max-mtu with VF-reps
  bnxt_en: Ignore src port field in decap filter nodes
  bnxt_en: do not allow wildcard matches for L2 flows
  bnxt_en: Fix ethtool -x crash when device is down.
  vhost: return bool from *_access_ok() functions
  vhost: fix vhost_vq_access_ok() log check
  vhost: Fix vhost_copy_to_user()
  net: aquantia: oops when shutdown on already stopped device
  net: aquantia: Regression on reset with 1.x firmware
  cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
  slip: Check if rstate is initialized before uncompressing
  lan78xx: Avoid spurious kevent 4 "error"
  lan78xx: Correctly indicate invalid OTP
  ...

Pull xen fixes from Juergen Gross:
 "A few fixes of Xen related core code and drivers"

* tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen
  xen/acpi: off by one in read_acpi_id()
  xen/acpi: upload _PSD info for non Dom0 CPUs too
  x86/xen: Delay get_cpu_cap until stack canary is established
  xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END
  xen: xenbus: Catch closing of non existent transactions
  xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling

Pull dma-mapping fix from Christoph Hellwig:
 "Fix for one swiotlb regression in 2.16 from Takashi"

* tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix unexpected swiotlb_alloc_coherent failures

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Prevent bus reference leak in mmc_blk_init()

  MMC host:
   - tmio: Fix error handling when issuing CMD23
   - jz4740: Fix race condition in IRQ mask update"

* tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio: Fix error handling when issuing CMD23
  mmc: core: Prevent bus reference leak in mmc_blk_init()
  mmc: jz4740: Fix race condition in IRQ mask update

Pull kdb updates from Jason Wessel:

 - fix 2032 time access issues and new compiler warnings

 - minor regression test cleanup

 - formatting fixes for end user use of kdb

* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  kdb: use memmove instead of overlapping memcpy
  kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
  kdb: bl: don't use tab character in output
  kdb: drop newline in unknown command output
  kdb: make "mdr" command repeat
  kdb: use __ktime_get_real_seconds instead of __current_kernel_time
  misc: kgdbts: Display progress of asynchronous tests

Pull microblaze updates from Michal Simek:
 "Use generic pci_mmap_resource_range()"

* tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Use generic pci_mmap_resource_range()
  microblaze: Provide pgprot_device/writecombine macros for nommu

Pull asm-generic fixes from Arnd Bergmann:
 "I have one regression fix for a minor build problem after the
  architecture removal series, plus a rework of the barriers in the
  readl/writel functions, thanks to work by Sinan Kaya:

  This started from a discussion on the linuxpcc and rdma mailing
  lists[1]. To summarize, we decided that architectures are responsible
  to serialize readl() and writel() accesses on a device MMIO space
  relative to DMA performed by that device.

  This series provides a pessimistic implementation of that behavior for
  asm-generic/io.h, which is in turn used by a number of architectures
  (h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
  xtensa). Some of those presumably need no extra barriers, or something
  weaker than rmb()/wmb(), and they are advised to override the new
  default for better performance.

  For inb()/outb(), the same barriers are used, but architectures might
  want to add another barrier to outb() here if that can guarantee
  non-posted behavior (some architectures can, others cannot do that).

  The readl_relaxed()/writel_relaxed() family of functions retains the
  existing behavior with no extra barriers"

[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html

* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  io: change writeX_relaxed() to remove barriers
  io: change readX_relaxed() to remove barriers
  dts: remove cris & metag dts hard link file
  io: change inX() to have their own IO barrier overrides
  io: change outX() to have their own IO barrier overrides
  io: define stronger ordering for the default writeX() implementation
  io: define stronger ordering for the default readX() implementation
  io: define several IO & PIO barrier types for the asm-generic version

Pull virtio update from Michael Tsirkin:
 "This adds reporting hugepage stats to virtio-balloon"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: export hugetlb page allocation counts

Pull IOMMU updates from Joerg Roedel:

 - OF_IOMMU support for the Rockchip iommu driver so that it can use
   generic DT bindings

 - rework of locking in the AMD IOMMU interrupt remapping code to make
   it work better in RT kernels

 - support for improved iotlb flushing in the AMD IOMMU driver

 - support for 52-bit physical and virtual addressing in the ARM-SMMU

 - various other small fixes and cleanups

* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
  iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
  iommu/rockchip: Support sharing IOMMU between masters
  iommu/rockchip: Add runtime PM support
  iommu/rockchip: Fix error handling in init
  iommu/rockchip: Use OF_IOMMU to attach devices automatically
  iommu/rockchip: Use IOMMU device for dma mapping operations
  dt-bindings: iommu/rockchip: Add clock property
  iommu/rockchip: Control clocks needed to access the IOMMU
  iommu/rockchip: Fix TLB flush of secondary IOMMUs
  iommu/rockchip: Use iopoll helpers to wait for hardware
  iommu/rockchip: Fix error handling in attach
  iommu/rockchip: Request irqs in rk_iommu_probe()
  iommu/rockchip: Fix error handling in probe
  iommu/rockchip: Prohibit unbind and remove
  iommu/amd: Return proper error code in irq_remapping_alloc()
  iommu/amd: Make amd_iommu_devtable_lock a spin_lock
  iommu/amd: Drop the lock while allocating new irq remap table
  iommu/amd: Factor out setting the remap table for a devid
  iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
  iommu/amd: Remove the special case from alloc_irq_table()
  ...

Pull more power management updates from Rafael Wysocki:
 "These include one big-ticket item which is the rework of the idle loop
  in order to prevent CPUs from spending too much time in shallow idle
  states. It reduces idle power on some systems by 10% or more and may
  improve performance of workloads in which the idle loop overhead
  matters. This has been in the works for several weeks and it has been
  tested and reviewed quite thoroughly.

  Also included are changes that finalize the cpufreq cleanup moving
  frequency table validation from drivers to the core, a few fixes and
  cleanups of cpufreq drivers, a cpuidle documentation update and a PM
  QoS core update to mark the expected switch fall-throughs in it.

  Specifics:

   - Rework the idle loop in order to prevent CPUs from spending too
     much time in shallow idle states by making it stop the scheduler
     tick before putting the CPU into an idle state only if the idle
     duration predicted by the idle governor is long enough.

     That required the code to be reordered to invoke the idle governor
     before stopping the tick, among other things (Rafael Wysocki,
     Frederic Weisbecker, Arnd Bergmann).

   - Add the missing description of the residency sysfs attribute to the
     cpuidle documentation (Prashanth Prakash).

   - Finalize the cpufreq cleanup moving frequency table validation from
     drivers to the core (Viresh Kumar).

   - Fix a clock leak regression in the armada-37xx cpufreq driver
     (Gregory Clement).

   - Fix the initialization of the CPU performance data structures for
     shared policies in the CPPC cpufreq driver (Shunyong Yang).

   - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
     bit (Viresh Kumar, Rafael Wysocki).

   - Mark the expected switch fall-throughs in the PM QoS core (Gustavo
     Silva)"

* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  tick-sched: avoid a maybe-uninitialized warning
  cpufreq: Drop cpufreq_table_validate_and_show()
  cpufreq: SCMI: Don't validate the frequency table twice
  cpufreq: CPPC: Initialize shared perf capabilities of CPUs
  cpufreq: armada-37xx: Fix clock leak
  cpufreq: CPPC: Don't set transition_latency
  cpufreq: ti-cpufreq: Use builtin_platform_driver()
  cpufreq: intel_pstate: Do not include debugfs.h
  PM / QoS: mark expected switch fall-throughs
  cpuidle: Add definition of residency to sysfs documentation
  time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
  nohz: Avoid duplication of code related to got_idle_tick
  nohz: Gather tick_sched booleans under a common flag field
  cpuidle: menu: Avoid selecting shallow states with stopped tick
  cpuidle: menu: Refine idle state selection for running tick
  sched: idle: Select idle state before stopping the tick
  time: hrtimer: Introduce hrtimer_next_event_without()
  time: tick-sched: Split tick_nohz_stop_sched_tick()
  cpuidle: Return nohz hint from cpuidle_select()
  jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
  ...

Pull ktest updates from Steven Rostedt:
 "These commits have either been sitting in my INBOX or have been in my
  local tree for some time. I need to push them upstream:

   - Separate out config-bisect.pl from ktest.pl.

     This allows users to do config bisects without full ktest setup.

   - Email on status change.

     Allow the user to be emailed on test start, finish, failure, etc.

   - Other small fixes and enhancements"

* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
  ktest: Take submenu into account for grub2 menus
  ktest.pl: Add MAIL_COMMAND option to define how to send email
  ktest.pl: Use run_command to execute sending mail
  ktest.pl: Allow dodie be recursive
  ktest.pl: Kill test if mailer is not supported
  ktest.pl: Add MAIL_PATH option to define where to find the mailer
  ktest.pl: No need to print no mailer is specified when mailto is not
  Ktest: add email options to sample.config
  Ktest: Use dodie for critical falures
  Ktest: Add SigInt handling
  Ktest: Add email support
  ktest.pl: Detect if a config-bisect was interrupted
  ktest.pl: Make finding config-bisect.pl dynamic
  ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
  ktest.pl: Use diffconfig if available for failed config bisects
  ktest.pl: Allow for the config-bisect.pl output to display to console
  ktest: Use config-bisect.pl in ktest.pl
  ktest: Add standalone config-bisect.pl program
  ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
  ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
  ...

Pull UBI and UBIFS updates from Richard Weinberger:
 "Minor bug fixes and improvements"

* tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Reject MLC NAND
  ubifs: Remove useless parameter of lpt_heap_replace
  ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx
  ubifs: remove unnecessary assignment
  ubi: Fix error for write access
  ubi: fastmap: Don't flush fastmap work on detach
  ubifs: Check ubifs_wbuf_sync() return code

Pull UML updates from Richard Weinberger:

 - a new and faster epoll based IRQ controller and NIC driver

 - misc fixes and janitorial updates

* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  Fix vector raw inintialization logic
  Migrate vector timers to new timer API
  um: Compile with modern headers
  um: vector: Fix an error handling path in 'vector_parse()'
  um: vector: Fix a memory allocation check
  um: vector: fix missing unlock on error in vector_net_open()
  um: Add missing EXPORT for free_irq_by_fd()
  High Performance UML Vector Network Driver
  Epoll based IRQ controller
  um: Use POSIX ucontext_t instead of struct ucontext
  um: time: Use timespec64 for persistent clock
  um: Restore symbol versions for __memcpy and memcpy

Pull ARM SoC fixes from Arnd Bergmann:
 "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two
  changes for the maintainer file, and one more fix for the newly added
  npcm platform, to enable the level 2 cache controller"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update ASPEED entry with details
  MAINTAINERS: Migrate oxnas list to groups.io
  arm: npcm: enable L2 cache in NPCM7xx architecture

Pull nios2 update from Ley Foon Tan:
 "Use read_persistent_clock64() instead of read_persistent_clock()"

* tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Use read_persistent_clock64() instead of read_persistent_clock()

Guillaume Nault says:

====================
l2tp: tunnel creation fixes

L2TP tunnel creation is racy. We need to make sure that the tunnel
returned by l2tp_tunnel_create() isn't going to be freed while the
caller is using it. This is done in patch #1, by separating tunnel
creation from tunnel registration.

With the tunnel registration code in place, we can now check for
duplicate tunnels in a race-free way. This is done in patch #2, which
incidentally removes the last use of l2tp_tunnel_find().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create()
from creating a duplicate tunnel. A tunnel can be concurrently
registered after l2tp_tunnel_find() returns. Therefore, searching for
duplicates must be done at registration time.

Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere
anymore.

Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>