Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:

"- Do preparating cleaning and DT bindings for RK3588 support
   (Sebastian Reichel)

 - Add driver support for RK3588 (Finley Xiao)

 - Use devm_reset_control_array_get_exclusive() for the Rockchip driver
   (Ye Xingchen)

 - Detect power gated thermal zones and return -EAGAIN when reading the
   temperature (Mikko Perttunen)

 - Remove thermal_bind_params structure as it is unused (Zhang Rui)

 - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
   Herring)

 - Update the power allocator documentation according to the thermal
   trace relocation (Lukas Bulwahn)

 - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
   (Chen-Yu Tsai)

 - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)

 - Add AP domain support to LVTS thermal controllers for mt8195
   (Balsam CHIHI)

 - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)

 - Make thermal_of_zone_[un]register() private to the thermal OF code
   (Daniel Lezcano)

 - Create a private copy of the thermal zone device parameters
   structure when registering a thermal zone (Daniel Lezcano)"

* tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/core: Alloc-copy-free the thermal zone parameters structure
  thermal/of: Unexport unused OF functions
  thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
  thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
  dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
  thermal: amlogic: Use dev_err_probe()
  thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
  MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
  dt-bindings: thermal: Drop unneeded quotes
  thermal/core: Remove thermal_bind_params structure
  thermal/drivers/tegra-bpmp: Handle offline zones
  thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
  dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
  thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
  thermal/drivers/rockchip: Support dynamic sized sensor array
  thermal/drivers/rockchip: Simplify channel id logic
  thermal/drivers/rockchip: Use dev_err_probe
  thermal/drivers/rockchip: Simplify clock logic
  thermal/drivers/rockchip: Simplify getting match data

Some older processors don't allow BIT(13) and BIT(15) in the current
mask set by "THERM_STATUS_CLEAR_CORE_MASK". This results in:

unchecked MSR access error: WRMSR to 0x19c (tried to
write 0x000000000000aaa8) at rIP: 0xffffffff816f66a6
(throttle_active_work+0xa6/0x1d0)

To avoid unchecked MSR issues, check CPUID for each relevant feature and
use that information to set the supported feature bits only in the
"clear" mask for cores. Do the same for the analogous package mask set
by "THERM_STATUS_CLEAR_PKG_MASK".

Introduce functions thermal_intr_init_core_clear_mask() and
thermal_intr_init_pkg_clear_mask() to set core and package mask bits,
respectively. These functions are called during initialization.

Fixes: 6fe1e64b ("thermal: intel: Prevent accidental clearing of HFI status")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://lore.kernel.org/lkml/cdf43fb423368ee3994124a9e8c9b4f8d00712c6.camel@linux.intel.com/T/Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.2+ <stable@kernel.org> # 6.2+
[ rjw: Renamed 2 funtions and 2 static variables, edited subject and
  changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull perf fixes from Borislav Petkov:

 - Fix "same task" check when redirecting event output

 - Do not wait unconditionally for RCU on the event migration path if
   there are no events to migrate

* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix the same task check in perf_event_set_output
  perf: Optimize perf_pmu_migrate_context()

Pull x86 fixes from Borislav Petkov:

 - Add a new Intel Arrow Lake CPU model number

 - Fix a confusion about how to check the version of the ACPI spec which
   supports a "online capable" bit in the MADT table which lead to a
   bunch of boot breakages with Zen1 systems and VMs

* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add model number for Intel Arrow Lake processor
  x86/acpi/boot: Correct acpi_is_processor_usable() check
  x86/ACPI/boot: Use FADT version to check support for online capable

Pull compute express link (cxl) fixes from Dan Williams:
 "Several fixes for driver startup regressions that landed during the
  merge window as well as some older bugs.

  The regressions were due to a lack of testing with what the CXL
  specification calls Restricted CXL Host (RCH) topologies compared to
  the testing with Virtual Host (VH) CXL topologies. A VH topology is
  typical PCIe while RCH topologies map CXL endpoints as Root Complex
  Integrated endpoints. The impact is some driver crashes on startup.

  This merge window also added compatibility for range registers (the
  mechanism that CXL 1.1 defined for mapping memory) to treat them like
  HDM decoders (the mechanism that CXL 2.0 defined for mapping
  Host-managed Device Memory). That work collided with the new region
  enumeration code that was tested with CXL 2.0 setups, and fails with
  crashes at startup.

  Lastly, the DOE (Data Object Exchange) implementation for retrieving
  an ACPI-like data table from CXL devices is being reworked for v6.4.
  Several fixes fell out of that work that are suitable for v6.3.

  All of this has been in linux-next for a while, and all reported
  issues [1] have been addressed.

  Summary:

   - Fix several issues with region enumeration in RCH topologies that
     can trigger crashes on driver startup or shutdown.

   - Fix CXL DVSEC range register compatibility versus region
     enumeration that leads to startup crashes

   - Fix CDAT endiannes handling

   - Fix multiple buffer handling boundary conditions

   - Fix Data Object Exchange (DOE) workqueue usage vs
     CONFIG_DEBUG_OBJECTS warn splats"

Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au [1]

* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/hdm: Extend DVSEC range register emulation for region enumeration
  cxl/hdm: Limit emulation to the number of range registers
  cxl/region: Move coherence tracking into cxl_region_attach()
  cxl/region: Fix region setup/teardown for RCDs
  cxl/port: Fix find_cxl_root() for RCDs and simplify it
  cxl/hdm: Skip emulation when driver manages mem_enable
  cxl/hdm: Fix double allocation of @cxlhdm
  PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
  PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
  cxl/pci: Handle excessive CDAT length
  cxl/pci: Handle truncated CDAT entries
  cxl/pci: Handle truncated CDAT header
  cxl/pci: Fix CDAT retrieval on big endian

Pull cifs client fixes from Steve French:
 "Two cifs/smb3 client fixes, one for stable:

   - double lock fix for a cifs/smb1 reconnect path

   - DFS prefixpath fix for reconnect when server moved"

* tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: double lock in cifs_reconnect_tcon()
  cifs: sanitize paths in cifs_update_super_prepath.

Pull char/misc driver fixes from Greg KH:
 "Here are a small set of various small driver changes for 6.3-rc6.
  Included in here are:

   - iio driver fixes for reported problems

   - coresight hwtracing bugfix for reported problem

   - small counter driver bugfixes

  All have been in linux-next for a while with no reported problems"

* tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: etm4x: Do not access TRCIDR1 for identification
  coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
  iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
  iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  counter: 104-quad-8: Fix Synapse action reported for Index signals
  counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  iio: adc: max11410: fix read_poll_timeout() usage
  iio: dac: cio-dac: Fix max DAC write value check for 12-bit
  iio: light: cm32181: Unregister second I2C client if present
  iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  iio: adc: ad7791: fix IRQ flags
  iio: buffer: make sure O_NONBLOCK is respected
  iio: buffer: correctly return bytes written in output buffers
  iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  iio: adis16480: select CONFIG_CRC32
  drivers: iio: adc: ltc2497: fix LSB shift
  iio: adc: qcom-spmi-adc5: Fix the channel name

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for some reported
  problems:

   - fsl_uart driver bugfixes

   - sh-sci serial driver bugfixes

   - renesas serial driver DT binding bugfixes

   - 8250 DMA bugfix

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
  tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
  tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
  serial: 8250: Prevent starting up DMA Rx on THRI interrupt
  dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
  tty: serial: sh-sci: Fix transmit end interrupt handler

Pull USB bugfixes from Greg KH:
 "Here are some small USB bugfixes for 6.3-rc6 that have been in my
  tree, and in linux-next, for a while. Included in here are:

   - new usb-serial driver device ids

   - xhci bugfixes for reported problems

   - gadget driver bugfixes for reported problems

   - dwc3 new device id

  All have been in linux-next with no reported problems"

* tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fixes error: uninitialized symbol 'len'
  usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
  usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
  usb: typec: altmodes/displayport: Fix configure initial pin assignment
  usb: dwc3: pci: add support for the Intel Meteor Lake-S
  xhci: Free the command allocated for setting LPM if we return early
  Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"
  xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
  USB: serial: option: add Quectel RM500U-CN modem
  usb: xhci: tegra: fix sleep in atomic call
  USB: serial: option: add Telit FE990 compositions
  USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs

Pull SCSI fixes from James Bottomley:
 "Four small fixes, all in drivers. They're all one or two lines except
  for the ufs one, but that's a simple revert of a previous feature"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
  scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
  scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)
  scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously"

Pull block fixes from Jens Axboe:

 - Ensure that ublk always reads the whole sqe upfront (me)

 - Fix for a block size probing issue with ublk (Ming)

 - Fix for the bio based polling (Keith)

 - NVMe pull request via Christoph:
      - fix discard support without oncs (Keith Busch)

 - Partition scan error handling regression fix (Yu)

* tag 'block-6.3-2023-04-06' of git://git.kernel.dk/linux:
  block: don't set GD_NEED_PART_SCAN if scan partition failed
  block: ublk: make sure that block size is set correctly
  ublk: read any SQE values upfront
  nvme: fix discard support without oncs
  blk-mq: directly poll requests

Pull io_uring fixes from Jens Axboe:
 "Just two minor fixes for provided buffers - one where we could
  potentially leak a buffer, and one where the returned values was
  off-by-one in some cases"

* tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux:
  io_uring: fix memory leak when removing provided buffers
  io_uring: fix return value when removing provided buffers

Pull dma-mapping fix from Christoph Hellwig:

 - fix a braino in the swiotlb alignment check fix (Petr Tesarik)

* tag 'dma-mapping-6.3-2023-04-08' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix a braino in the alignment check fix

Pull tracing fixes from Steven Rostedt:
 "A couple more minor fixes:

   - Reset direct->addr back to its original value on error in updating
     the direct trampoline code

   - Make lastcmd_mutex static"

* tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/synthetic: Make lastcmd_mutex static
  ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()

Merge tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM fixes from Andrew Morton:
 "28 hotfixes.

  23 are cc:stable and the other five address issues which were
  introduced during this merge cycle.

  20 are for MM and the remainder are for other subsystems"

* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
  maple_tree: fix a potential concurrency bug in RCU mode
  maple_tree: fix get wrong data_end in mtree_lookup_walk()
  mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
  nilfs2: fix sysfs interface lifetime
  mm: take a page reference when removing device exclusive entries
  mm: vmalloc: avoid warn_alloc noise caused by fatal signal
  nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
  nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
  zsmalloc: document freeable stats
  zsmalloc: document new fullness grouping
  fsdax: force clear dirty mark if CoW
  mm/hugetlb: fix uffd wr-protection for CoW optimization path
  mm: enable maple tree RCU mode by default
  maple_tree: add RCU lock checking to rcu callback functions
  maple_tree: add smp_rmb() to dead node detection
  maple_tree: fix write memory barrier of nodes once dead for RCU mode
  maple_tree: remove extra smp_wmb() from mas_dead_leaves()
  maple_tree: fix freeing of nodes in rcu mode
  maple_tree: detect dead nodes in mas_start()
  maple_tree: be more cautious about dead nodes
  ...

Pull gpio fixes from Bartosz Golaszewski:

 - fix irq handling in gpio-davinci

 - fix Kconfig dependencies for gpio-regmap

* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: davinci: Add irq chip flag to skip set wake
  gpio: davinci: Do not clear the bank intr enable bit in save_context
  gpio: GPIO_REGMAP: select REGMAP instead of depending on it

Pull ACPI fixes from Rafael Wysocki:
 "Fix the ACPI backlight override mechanism for the cases when
  acpi_backlight=video is set through the kernel command line or a DMI
  quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
  Lenovo ThinkPad W530 (Hans de Goede)"

* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
  ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
  ACPI: video: Make acpi_backlight=video work independent from GPU driver
  ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()

Pull arm64 fix from Catalin Marinas:
 "Fix uninitialised variable warning (from smatch) in the arm64 compat
  alignment fixup code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: Work around uninitialized variable warning

Pull ksmbd server fixes from Steve French:
 "Four fixes, three for stable:

   - slab out of bounds fix

   - lock cancellation fix

   - minor cleanup to address clang warning

   - fix for xfstest 551 (wrong parms passed to kvmalloc)"

* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
  ksmbd: delete asynchronous work from list
  ksmbd: remove unused is_char_allowed function
  ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN

The caller of the function thermal_zone_device_register_with_trips()
can pass a thermal_zone_params structure parameter.

This one is used by the thermal core code until the thermal zone is
destroyed. That forces the caller, so the driver, to keep the pointer
valid until it unregisters the thermal zone if we want to make the
thermal zone device structure private the core code.

As the thermal zone device structure would be private, the driver can
not access to thermal zone device structure to retrieve the tzp field
after it passed it to register the thermal zone.

So instead of forcing the users of the function to deal with the tzp
structure life cycle, make the usage easier by allocating our own
thermal zone params, copying the parameter content and by freeing at
unregister time. The user can then create the parameters on the stack,
pass it to the registering function and forget about it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230404075138.2914680-3-daniel.lezcano@linaro.org

The functions thermal_of_zone_register() and
thermal_of_zone_unregister() are no longer needed from the drivers as
the devm_ variant is always used.

Make them static in the C file and remove their declaration from thermal.h
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230404075138.2914680-2-daniel.lezcano@linaro.org

The driver is using the devm_thermal_of_zone_device_register().

In the error path of the function calling
devm_thermal_of_zone_device_register(), the function
devm_thermal_of_zone_unregister() should be called instead of
thermal_of_zone_unregister(), otherwise this one will be called twice
when the device is freed.

The same happens for the remove function where the devm_ guarantee the
thermal_of_zone_unregister() will be called, so adding this call in
the remove function will lead to a double free also.

Use devm_ variant in the error path of the probe function.

Remove thermal_of_zone_unregister() in the remove function.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230404075138.2914680-1-daniel.lezcano@linaro.org

Add MT8195 AP Domain support to LVTS Driver.

Take the opportunity to update the comments to show calibration data
information related to the new domain.

[dlezcano]: Massaged a bit the changelog
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com

Add AP Domain to LVTS thermal controllers dt-binding definition for mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307154524.118541-2-bchihi@baylibre.com

Replace the open-code with dev_err_probe() to simplify the code.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/202303241020110014476@zte.com.cn

The binary representation for sensor 1 interrupt status was incorrectly
assembled, when compared to the full table given in the same comment
section. The conversion into hex was also incorrect, leading to
incorrect interrupt status bitmask for sensor 1. This would cause the
driver to incorrectly identify changes for sensor 1, when in fact it
was sensor 0, or a sensor access time out.

Fix the binary and hex representations in the comments, and the actual
bitmask macro.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328031017.1360976-1-wenst@chromium.org

Commit 32a7a021 ("thermal/core: Relocate the traces definition in
thermal directory") moves include/trace/events/thermal_power_allocator.h to
drivers/thermal/thermal_trace_ipa.h, but misses to adjust the file
entry for the THERMAL/POWER_ALLOCATOR section.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Adjust this file entry in THERMAL/POWER_ALLOCATOR.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328091737.6785-1-lukas.bulwahn@gmail.com

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230327170233.4109156-1-robh@kernel.org

Remove struct thermal_bind_params because no one is using it for thermal
binding now.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230330104526.3196-1-rui.zhang@intel.com

Thermal zones located in power domains may not be accessible when
the domain is powergated. In this situation, reading the temperature
will return -BPMP_EFAULT. When evaluating trips, BPMP will internally
use -256C as the temperature for offline zones.

For smooth operation, for offline zones, return -EAGAIN when reading
the temperature and allow registration of zones even if they are
offline during probe.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230330094904.2589428-1-cyndis@kapsi.fi

Switch devm_reset_control_array_get() to
devm_reset_control_array_get_exclusive().
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/202303241108553006227@zte.com.cn

Add a new compatible for the thermal sensor device on RK3588 SoCs.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-8-sebastian.reichel@collabora.com

The RK3588 SoC has seven temperature sensor ADC channels:

- Chip Center
- CPU Cluster 1 (Dual A76 "Big" Cores)
- CPU Cluster 2 (Dual A76 "Big" Cores)
- CPU Cluster 0 (Quad A55 "Little" Cores)
- Power Domain Center
- Graphics Processing Unit
- Neural Processing Unit
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[rebase, squash fixes]
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-7-sebastian.reichel@collabora.com

Dynamically allocate the sensors array based on the amount
of platform sensors in preparation for rk3588 support, which
needs 7 sensors.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-6-sebastian.reichel@collabora.com

Replace the channel ID lookup table by a simple offset, since
the channel IDs are consecutive.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230308112253.15659-5-sebastian.reichel@collabora.com

Use dev_err_probe to simplify error printing in the driver's probe
routine.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-4-sebastian.reichel@collabora.com

By using devm_clk_get_enabled() the clock acquisition and
enabling can be done in one step with automatic error
handling.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-3-sebastian.reichel@collabora.com