- 24 Jun, 2019 3 commits
-
-
Wolfram Sang authored
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
The mt9m111_power_on function did not properly clean up whenever it encountered an error. Do that now. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Sakari Ailus authored
The regulator_get() function returns a regulator when it succeeds. There's no need to check whether the regulator is NULL later on. Signed-off-by:
-
- 21 Jun, 2019 37 commits
-
-
Robert Jarzmik authored
In the soc_camera removal, the board specific power callback was dropped. This at least will remove the power optimization from ezx and em-x270 pxa based boards. As to recreate the same level of functionality, make the mt9m111 have a regulator providing it its power, so that board designers can plug in a gpio based or ldo regulator, mimicking their former soc_camera power hook. [sakari.ailus@linux.intel.com: fix a build warning] Fixes: 5c10113cc668 ("media: mt9m111: make a standalone v4l2 subdevice") Signed-off-by:Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Tested-by:
-
Sakari Ailus authored
devm_gpiod_get never returns NULL; therefore it's not necessary to check for that. PTR_ERR(NULL) also yields zero, which is confusing to smatch. Reported-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Sakari Ailus authored
PTR_ERR(NULL) yields 0 which is commonly used to denote success. This is the case here, and PTR_ERR(NULL) is apparently shunned upon. Fix this by explicitly returning 0 if fwnode == NULL. Reported-by:
-
Janusz Krzysztofik authored
Commit c62b9605 ("media: ov6650: Register with asynchronous subdevice framework") carelessly requested creation of a video device node by setting a V4L2_SUBDEV_FL_HAS_DEVNODE flag. The driver is not ready for that as it doesn't implement proper locking required for serialization of IOCTLs. Fix it by dropping the flag assignment. Fixes: c62b9605 ("media: ov6650: Register with asynchronous subdevice framework") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Shobhit Kukreti authored
Removed the warning from the following files: drivers/media/i2c/ov13858.c drivers/media/i2c/ov2685.c drivers/media/i2c/ov5695.c Signed-off-by:
Shobhit Kukreti <shobhitkukreti@gmail.com> Signed-off-by:
-
Johan Korsnes authored
Signed-off-by:
Johan Korsnes <johan.korsnes@gmail.com> Signed-off-by:
-
Johan Korsnes authored
Set/invalidate physical addresses based on the configuration of the display present control. This is relevant not only when the display present control is modified, but also when the Vivid instance EDID is set/cleared. Signed-off-by:
-
Johan Korsnes authored
CEC adapters and controllers (handlers) are now set up as follows: 1. Allocate CEC adapters: setup of control handlers in next step requires these adapters to be allocated. 2. Setup of control handlers: This must be done prior to registering and exposing the adapters to user space to avoid a race condition. 3. Register CEC adapters: make them available to user space. Signed-off-by:
-
Johan Korsnes authored
Adds the following bitmask control: -V4L2_CID_DV_RX_POWER_PRESENT The RX_POWER_PRESENT bitmask is set based on the digital video timings signal mode. This also removes 1/1 warnings for v4l2-compliance test on vivid instance with HDMI input. Signed-off-by:
-
Johan Korsnes authored
Adds the following bitmask controls: -V4L2_CID_DV_TX_EDID_PRESENT -V4L2_CID_DV_TX_HOTPLUG -V4L2_CID_DV_TX_RXSENSE The bitmasks are all set based on the custom vivid DISPLAY_PRESENT control. This also removes 2/2 v4l2-compliance warnings for vivid output device. Signed-off-by:
-
Johan Korsnes authored
This will be used for HDMI-specific controls such as hotplug detection and power present. Signed-off-by:
-
Johan Korsnes authored
Add a custom control for selecting the presence of a display connected to the active output. This control is part of an effort to implement proper HDMI (dis)connect behavior for vivid. Signed-off-by:
-
Johan Korsnes authored
Make the following properties per-input: -Standard Signal Mode -Standard These properties need to be per-input in order to implement proper HDMI (dis)connect-behavior, where the signal mode will be used to signify whether or not there is an inpute device connected. Signed-off-by:
-
Johan Korsnes authored
Make the following properties per-input -DV Timings Signal Mode -DV Timings These properties need to be per-input in order to implement proper HDMI (dis)connect-behavior, where the signal mode will be used to signify whether or not there is an input device connected. Signed-off-by:
-
Dmitry Osipenko authored
The __packed macro isn't available in userspace with the kernel headers. Checkpatch asks to use the macro, which is unwanted in a case of a UAPI header. There is no much benefit in a tight packing of the structures, hence let's pack them manually to cleanup things a tad. Note that there is no old-stable userspace that will suffer from this change, hence it's fine to change the ABI. In a result also more space is reserved for a possible future expansion of the UAPI as it was already shown that more fields will be needed for a later SoC generations. Suggested-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
The BIT macro isn't available in userspace. Checkpatch complains about shifts being used instead of the macro and people are starting to send patches without realizing that it's a UAPI header file. Hence let's replace the BIT macro with a hex values to make everyone happy. Signed-off-by:
-
Fabio Estevam authored
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Jae Hyun Yoo authored
AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Fabio Estevam authored
As per the i.MX7D Reference Manual only the MCLK is used for the CSI block, so only document this single clock. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
André Almeida authored
Create vimc documentation file to explain its basic features, its topology, how to configure it and to document vimc's subdevices. Signed-off-by:
André Almeida <andrealmeid@collabora.com> Suggested-by:
Helen Koike <helen.koike@collabora.com> [hverkuil-cisco@xs4all.nl: Fix typo: The ``v4l2-utils`` -> The ``v4l-utils`` package] Signed-off-by:
-
André Almeida authored
Add comments at vimc_streamer_s_stream and vimc_streamer_thread, making the vimc-stream totally documented. Signed-off-by:
-
Akinobu Mita authored
Use V4L2_FRACT_COMPARE to check whether two v4l2_fract structs are equal. Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
YueHaibing authored
If COMPILE_TEST is y and SONY_LAPTOP is m, building fails as below: Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 6159e12e ("media: meye: allow building it with COMPILE_TEST on non-x86") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Luca Ceresoli authored
This sentence renders as: > Since such compound controls need to expose more information about > themselves than is possible with ioctls VIDIOC_QUERYCTRL, > VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU the VIDIOC_QUERY_EXT_CTRL ^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^ > ioctl was added. This does not make sense. Fix by providing an explicit link text. This results in: > Since such compound controls need to expose more information about > themselves than is possible with VIDIOC_QUERYCTRL the > VIDIOC_QUERY_EXT_CTRL ioctl was added. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Akinobu Mita authored
The tpf_min (1/100) and tpf_max (100/1) are used as the lowest and the highest allowable value for the desired frame period in vivid_vid_cap_s_parm(). But the comparison between these values is unnecessary because the compared value is already chosen from webcam_intervals[] (from 1/60 to 1/1). Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Alexandre Courbot authored
We were getting the codec interface through a proxy function that does not bring anything compared to just accessing the interface definition directly, so just do that. Also make the decoder interfaces const. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
The interface used to communicate with the firmware casts pointers into unsigned longs and back again in order to store private references, all of this for pointers that remain purely in the kernel. Replace these unsigned longs with void pointers to make the code a bit sturdier and easier to follow. Also simplify some interfaces by removing arguments that could be infered from others. Signed-off-by:
-
André Almeida authored
Remove redundant Makefile rules (vimc_capture-objs, ...). Stop exposing vimc-{common, streamer} as modules, since there's no use case where they would be individually added/removed from Vimc. As consequence, remove MODULE_ macros from vimc-{common, streamer}. `-objs` is fitted for building host programs, change to `-y`, more straightforward for device drivers. Signed-off-by: -
André Almeida authored
Fix typo on "tranforming". Add a line break so it keeps under 80 columns. Fix typo on "[it] need". Signed-off-by:
-
Luca Ceresoli authored
This paragraph was added by commit a42b57f5 ("V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API") back in 2010, when the controls API has been improved. Nowadays it is a bit anachronistic, so remove it. The same information is stated in up-to-date wording a few paragraphs later > You’re done! And this is sufficient for most of the drivers we have. No > need to do any validation of control values, or implement QUERYCTRL, > QUERY_EXT_CTRL and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS > are automatically supported. Signed-off-by:
-
Luca Ceresoli authored
The tutorial in this section is almost complete, add the one missing bit. Signed-off-by:
-
Luca Ceresoli authored
All these code blocks contain C code, enable C formatting for a nicer reading. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to functions. Add one to simplify reading. Signed-off-by:
-
Luca Ceresoli authored
The code snippet showing how to add controls to the driver’s top-level struct is present twice, but only the second time it is split in the V4L2 and subdev cases. Consolidate everything at the beginning. Also remove the "Where foo->bar is of type struct baz" sentences, this obvious from the code. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to struct definitions. Add one where each struct is introduced. Signed-off-by:
-
Luca Ceresoli authored
Fix indentation in example C code. Signed-off-by:
-
Luca Ceresoli authored
Mentioning :ref:`VIDIOC_QUERYCTRL` renders all the three related ioctls. Explicitly adding VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU will make them render twice, so remove them Signed-off-by:
-
