- 09 Dec, 2020 6 commits
-
-
Chris Wilson authored
Now that the only user of the uninterruptible wait was eliminated, remove the support. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Tigerlake is plagued by spontaneous DMAR faults [reason 7, next page table ptr is invalid] which lead to GPU hangs. These faults occur when an iommu map is immediately reused. Adding further clflushes and barriers around either the GTT PTE or iommu PTE updates do not prevent the faults. So far the only effect has been from inducing a delay between reuse of the iommu on the GPU, and applying the delay at the iommu map allows for the smallest stable delay. Note that such a delay is hideous and clearly does not fix the root cause, and so should only be a bandaid until a complete solution is found. The delay was determined by running igt/gem_exec_fence/parallel in a loop for a few hours (unpatched MTBF is about 10s). We have also seen such DMAR fault [reason 7] errors on other platforms, notably gen9-gen11, but so far it has only been trivially and consistently reproduced on Tigerlake. v2: Leave a tell-tale to know when we apply the vt'd quirk, and as a reminder to remove it again. Hopefully. Testcase: igt/gem_exec_fence/parallel Signed-off-by:
-
Chris Wilson authored
A call to wait for the GT to idle from inside the put_pages fallback is prone to cause an uninterruptible livelock. As it does not provide adequate serialisation with new requests, simply fallback to a trivial sleep. Signed-off-by:
-
Lucas De Marchi authored
Document what a masked register is according to bspec so we avoid developers using the wrong functions to implement WAs. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Lucas De Marchi authored
The use of "masked" in this function is due to its history. Once upon a time it received a mask and a value as parameter. Since commit eeec73f8 ("drm/i915/gt: Skip rmw for masked registers") that is not true anymore and now there is a clear and a set parameter. Depending on the case, that can still be thought as a mask and value, but there are some subtle differences: what we clear doesn't need to be the same bits we are setting, particularly when we are using masked registers. The fact that we also have "masked registers", i.e. registers whose mask is stored in the upper 16 bits of the register, makes it even more confusing, because "masked" in wa_write_masked_or() has little to do with masked registers, but rather refers to the old mask parameter the function received (that can also, but not exclusively, be used to write to masked register). Avoid the ambiguity and misnomer by renaming it to something else, hopefully less confusing: wa_write_clr_set(), to designate that we are doing both clr and set operations in the register. Signed-off-by:
-
Lucas De Marchi authored
When using masked registers, there is nothing to clear since a masked register has the mask in the upper 16b: we can just write to the location we want and use the mask to control what bits we are writing to. However that doesn't mean we don't want to read back the register and check the value actually matched what we wanted to write, i.e. that the WA stick. That should be an explicit opt-out for registers that are either write-only or that are affected by hardware misbehavior. Moreover both wa_masked_en() and wa_masked_dis() check the WA stick, so skipping the check just because the field is more than 1 bit is surprising and error-prone. Signed-off-by:
-
- 08 Dec, 2020 1 commit
-
-
Chris Wilson authored
Closed vma are protected by the GT wakeref held as we lookup the vma, so we know that the vma will not be freed as we process it for the execbuf. Instead we expect to catch the closed status of the context, and simply allow the close-race on an individual vma to be washed away. Longer term, the GT wakeref protection will be removed by explicit vma.kref tracking. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2245Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201207193824.18114-1-chris@chris-wilson.co.uk
-
- 07 Dec, 2020 2 commits
-
-
Chris Wilson authored
When we fail to find a single block large enough to require splitting, report the largest block we did find. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201207130346.11849-1-chris@chris-wilson.co.uk
-
Colin Ian King authored
Currently the check that the unsigned size_t variable i is >= 0 is always true because the unsigned variable will never be negative, causing the loop to run forever. Fix this by changing the pre-decrement check to a zero check on i followed by a decrement of i. Addresses-Coverity: ("Unsigned compared against 0") Fixes: bfed6708 ("drm/i915: use vmap in shmem_pin_map") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 05 Dec, 2020 4 commits
-
-
Lucas De Marchi authored
Remove the last macro and implement it as a function like the rest of the operations that don't assume there is a `wal` list, but rather receive it as argument. Signed-off-by:
-
Lucas De Marchi authored
Just ommitting the list it's operating on doesn't save much typing and adds another way to do the same thing. Just replace it with wa_masked_dis(). Signed-off-by:
-
Lucas De Marchi authored
Just ommitting the list it's operating on doesn't save much typing and adds another way to do the same thing. Just replace it with wa_masked_en(). Signed-off-by:
-
Swathi Dhanavanthri authored
Set GS Timer to 224 to prevent a HS/DS hang. Bspec: 53508 v2: reword commit message and add comment explaining why read verification is ignored (Chris) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by:
-
- 04 Dec, 2020 5 commits
-
-
Chris Wilson authored
Across a reset, we stop the engine but not the timers. This leaves a window where the timers have inconsistent state with the engine, but should only result in a spurious timeout. As we cancel the outstanding events, also cancel their timers. Signed-off-by:
-
Chris Wilson authored
The GT and engine reset failures are completely invisible when looking at a trace for a bug, but are vital to understanding the incomplete flow. Signed-off-by:
-
Chris Wilson authored
We currently presume that the engine reset is successful, cancelling the expired preemption timer in the process. However, engine resets can fail, leaving the timeout still pending and we will then respond to the timeout again next time the tasklet fires. What we want is for the failed engine reset to be promoted to a full device reset, which is kicked by the heartbeat once the engine stops processing events. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 3a7a92ab ("drm/i915/execlists: Force preemption") Signed-off-by:
-
Chris Wilson authored
Before reseting the engine, we suspend the execution of the guilty request, so that we can continue execution with a new context while we slowly compress the captured error state for the guilty context. However, if the reset fails, we will promptly attempt to reset the same request again, and discover the ongoing capture. Ignore the second attempt to suspend and capture the same request. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 32ff621f ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by:
-
Chris Wilson authored
In the course of discovering and closing many races with context closure and execbuf submission, since commit 61231f6b ("drm/i915/gem: Check that the context wasn't closed during setup") we started checking that the context was not closed by another userspace thread during the execbuf ioctl. In doing so we cancelled the inflight request (by telling it to be skipped), but kept reporting success since we do submit a request, albeit one that doesn't execute. As the error is known before we return from the ioctl, we can report the error we detect immediately, rather than leave it on the fence status. With the immediate propagation of the error, it is easier for userspace to handle. Fixes: 61231f6b ("drm/i915/gem: Check that the context wasn't closed during setup") Testcase: igt/gem_ctx_exec/basic-close-race Signed-off-by:
-
- 03 Dec, 2020 1 commit
-
-
Dan Carpenter authored
There is a copy and paste bug in this code. It's supposed to check "obj2" instead of checking "obj" a second time. Fixes: 80f0b679 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andi Shyti <andi.shyti@intel.com> Signed-off-by:
-
- 02 Dec, 2020 6 commits
-
-
Chris Wilson authored
Mixing I915_ALLOC_CONTIGUOUS and I915_ALLOC_MAX_SEGMENT_SIZE fared badly. The two directives conflict, with the contiguous request setting the min_order to the full size of the object, and the max-segment-size setting the max_order to the limit of the DMA mapper. This results in a situation where max_order < min_order, causing our sanity checks to fail. Instead of limiting the buddy block size, in the previous patch we split the oversized buddy into multiple scatterlist elements. Fixes: d2cf0125 ("drm/i915/lmem: Limit block size to 4G") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202173444.14903-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Adhere to the i915_sg_max_segment() limit on the lengths of individual scatterlist elements, and in doing so split up very large chunks of lmem into manageable pieces for the dma-mapping backend. Reported-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Suggested-by:
-
Chris Wilson authored
Since we only initialise the prng once within the scope of the selftest, we can use the default initialiser. Signed-off-by:
-
Tvrtko Ursulin authored
Adding any kinds of "last" abi markers is usually a mistake which I repeated when implementing the PMU because it felt convenient at the time. This patch marks I915_PMU_LAST as deprecated and stops the internal implementation using it for sizing the event status bitmask and array. New way of sizing the fields is a bit less elegant, but it omits reserving slots for tracking events we are not interested in, and as such saves some runtime space. Adding sampling events is likely to be a special event and the new plumbing needed will be easily detected in testing. Existing asserts against the bitfield and array sizes are keeping the code safe. First event which gets the new treatment in this new scheme are the interrupts - which neither needs any tracking in i915 pmu nor needs waking up the GPU to read it. v2: * Streamline helper names. (Chris) v3: * Comment which events need tracking. (Chris) Signed-off-by:
-
Chris Wilson authored
Convert the NULL pointer from a failed vmap() to ERR_PTR(-ENOMEM) for propagation. <1> [269.830447] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1> [269.830455] #PF: supervisor write access in kernel mode <1> [269.830457] #PF: error_code(0x0002) - not-present page <6> [269.830459] PGD 0 P4D 0 <4> [269.830465] Oops: 0002 [#1] PREEMPT SMP PTI <4> [269.830469] CPU: 3 PID: 5789 Comm: i915_selftest Tainted: G U 5.10.0-rc6-CI-CI_DRM_9412+ #1 <4> [269.830472] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4> [269.830636] RIP: 0010:igt_client_fill+0x1b9/0x5f0 [i915] <4> [269.830640] Code: e8 0c 32 02 00 48 89 c5 48 3d 00 f0 ff ff 0f 87 e9 02 00 00 48 8b 8b 78 06 00 00 44 89 f0 48 89 ef 35 af be ad de 48 c1 e9 02 <f3> ab 0f b6 83 80 03 00 00 89 c2 c0 ea 03 83 e2 02 75 09 83 c8 20 <4> [269.830642] RSP: 0018:ffffc900007a79e8 EFLAGS: 00010206 <4> [269.830645] RAX: 00000000df0bf37b RBX: ffff88811d8af3c0 RCX: 00000000010afc00 <4> [269.830647] RDX: 0000000000000000 RSI: ffffffff822f2b17 RDI: 0000000000000000 <4> [269.830648] RBP: 0000000000000000 R08: ffff888111c80930 R09: 00000000fffffffe <4> [269.830650] R10: 0000000000000000 R11: 00000000ffbc70e4 R12: ffff88811090f700 <4> [269.830652] R13: ffff88810df60180 R14: 0000000001a64dd4 R15: 0000000000000000 <4> [269.830655] FS: 00007f137b07de40(0000) GS:ffff88817b980000(0000) knlGS:0000000000000000 <4> [269.830657] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [269.830659] CR2: 0000000000000000 CR3: 0000000115984000 CR4: 0000000000350ee0 <4> [269.830661] Call Trace: <4> [269.830780] __i915_subtests.cold.7+0x42/0x92 [i915] <4> [269.830886] ? __i915_nop_teardown+0x10/0x10 [i915] <4> [269.830989] ? __i915_live_setup+0x30/0x30 [i915] <4> [269.831104] __run_selftests.part.3+0xf7/0x14c [i915] <4> [269.831939] i915_live_selftests.cold.5+0x1f/0x47 [i915] <4> [269.832027] i915_pci_probe+0x93/0x1d0 [i915] <4> [269.832037] ? _raw_spin_unlock_irqrestore+0x2f/0x50 <4> [269.832043] pci_device_probe+0x9e/0x110 <4> [269.832049] really_probe+0x1c4/0x430 <4> [269.832053] driver_probe_device+0xd9/0x140 <4> [269.832056] device_driver_attach+0x4a/0x50 <4> [269.832059] __driver_attach+0x83/0x140 <4> [269.832062] ? device_driver_attach+0x50/0x50 <4> [269.832064] ? device_driver_attach+0x50/0x50 <4> [269.832067] bus_for_each_dev+0x75/0xc0 <4> [269.832070] bus_add_driver+0x14b/0x1f0 <4> [269.832073] driver_register+0x66/0xb0 <4> [269.832160] i915_init+0x70/0x87 [i915] <4> [269.832164] ? 0xffffffffa05e3000 <4> [269.832168] do_one_initcall+0x56/0x2e0 <4> [269.832174] ? kmem_cache_alloc_trace+0x6a4/0x770 <4> [269.832180] do_init_module+0x55/0x200 <4> [269.832184] load_module+0x22a2/0x2480 <4> [269.832191] ? __do_sys_finit_module+0xad/0x110 <4> [269.832194] __do_sys_finit_module+0xad/0x110 <4> [269.832199] do_syscall_64+0x33/0x80 <4> [269.832202] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <4> [269.832204] RIP: 0033:0x7f137a718839 <4> [269.832208] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4> [269.832210] RSP: 002b:00007ffc4267d308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4> [269.832214] RAX: ffffffffffffffda RBX: 000056288b88f0d0 RCX: 00007f137a718839 <4> [269.832216] RDX: 0000000000000000 RSI: 000056288b895850 RDI: 0000000000000007 <4> [269.832218] RBP: 000056288b895850 R08: 312d3d7374736574 R09: 000056288b88c020 <4> [269.832220] R10: 00007ffc4267d450 R11: 0000000000000246 R12: 0000000000000000 <4> [269.832222] R13: 000056288b8877a0 R14: 0000000000000020 R15: 0000000000000045 <4> [269.832226] Modules linked in: i915(+) vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cdc_ether usbnet snd_intel_dspcfg mii snd_hda_codec snd_hwdep snd_hda_core r8169 snd_pcm realtek mei_me mei prime_numbers intel_lpss_pci i2c_hid pinctrl_geminilake [last unloaded: i915] <4> [269.832264] CR2: 0000000000000000 Fixes: cb2ce93e ("drm/i915/gem: Differentiate oom failures from invalid map types") Signed-off-by:
-
Swathi Dhanavanthri authored
This workaround is applicable only for tgl,rkl and dg1. Bspec: 52890, 53273, 53508. Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
-
- 30 Nov, 2020 5 commits
-
-
Chris Wilson authored
After a cursory check on the parameters to i915_gem_object_pin_map(), where we return a precise error, if the backend rejects the mapping we always return PTR_ERR(-ENOMEM). Let us also return a more precise error here so we can differentiate between running out of memory and programming errors (or situations where we may be trying different paths and looking for an error from an unsupported map). Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
Block sizes are only limited by the largest power-of-two that will fit in the region size, but to construct an object we also require feeding it into an sg list, where the upper limit of the sg entry is at most UINT_MAX. Therefore to prevent issues with allocating blocks that are too large, add the flag I915_ALLOC_MAX_SEGMENT_SIZE which should limit block sizes to the i915_sg_segment_size(). v2: (matt) - query the max segment. - prefer flag to limit block size to 4G, since it's best not to assume the user will feed the blocks into an sg list. - simple selftest so we don't have to guess. Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: CQ Tang <cq.tang@intel.com> Signed-off-by: -
Matthew Auld authored
For the LMEM case if we have suitable alignment and 2M physical pages we should always get 2M GTT pages within the constraints of the hugepages selftest. If we don't then something might be wrong in our construction of the backing pages. References: 330b7d33 ("drm/i915/region: fix order when adding blocks") Signed-off-by:
-
Matthew Auld authored
In igt_ppgtt_sanity_check we should also exercise the non-contiguous option for LMEM, since this will give us slightly different sg layouts and alignment. Signed-off-by:
-
Chris Wilson authored
We treat idling the GT (intel_rps_park) as a downclock event, and reduce the frequency we intend to restart the GT with. Since the two workloads are likely related (e.g. a compositor rendering every 16ms), we want to carry the frequency and load information from across the idling. However, we do also need to update the frequencies so that workloads that run for less than 1ms are autotuned by RPS (otherwise we leave compositors running at max clocks, draining excess power). Conversely, if we try to run too slowly, the next workload has to run longer. Since there is a hysteresis in the power graph, below a certain frequency running a short workload for longer consumes more energy than running it slightly higher for less time. The exact balance point is unknown beforehand, but measurements with 30fps media playback indicate that RPe is a better choice. Reported-by:
Edward Baker <edward.baker@intel.com> Tested-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
- 28 Nov, 2020 1 commit
-
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Reviewed-by:
-
- 27 Nov, 2020 2 commits
-
-
Venkata Ramana Nayana authored
As we use a shmemfs file to hold the context state, when not in use it may be swapped out, such as across suspend. Since we wrote into the shmemfs without marking the pages as dirty, the contents may be dropped instead of being written back to swap. On re-using the shmemfs file, such as creating a new context after resume, the contents of that file were likely garbage and so the new context could then hang the GPU. Simply mark the page as being written when copying into the shmemfs file, and it the new contents will be retained across swapout. Fixes: be1cb55a ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Reviewed-by:
-
Chris Wilson authored
We checked the table size against a hardcoded number of entries, and that number was excluding the special mocs registers at the end. Fixes: 977933b5 ("drm/i915/gt: Program mocs:63 for cache eviction on gen9") Signed-off-by:
-
- 26 Nov, 2020 6 commits
-
-
Chris Wilson authored
If while we are cancelling the breadcrumb signaling, we find that the request is already completed, move it to the irq signaler and let it be signaled. v2: Tweak reference counting so that we only acquire a new reference on adding to a signal list, as opposed to a hidden i915_request_put of the caller's reference. Signed-off-by:
-
Chris Wilson authored
As we funnel more and more contexts into the breadcrumbs on an engine, the hold time of b->irq_lock grows. As we may then contend with the b->irq_lock during request submission, this increases the burden upon the engine->active.lock and so directly impacts both our execution latency and client latency. If we split the b->irq_lock by introducing a per-context spinlock to manage the signalers within a context, we then only need the b->irq_lock for enabling/disabling the interrupt and can avoid taking the lock for walking the list of contexts within the signal worker. Even with the current setup, this greatly reduces the number of times we have to take and fight for b->irq_lock. Furthermore, this closes the race between enabling the signaling context while it is in the process of being signaled and removed: <4>[ 416.208555] list_add corruption. prev->next should be next (ffff8881951d5910), but was dead000000000100. (prev=ffff8882781bb870). <4>[ 416.208573] WARNING: CPU: 7 PID: 0 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4>[ 416.208575] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.208611] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G U 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.208614] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.208627] RIP: 0010:__list_add_valid+0x4d/0x70 <4>[ 416.208631] Code: c3 48 89 d1 48 c7 c7 60 18 33 82 48 89 c2 e8 ea e0 b6 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 b0 18 33 82 e8 d3 e0 b6 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 00 19 33 82 e8 <4>[ 416.208633] RSP: 0018:ffffc90000280e18 EFLAGS: 00010086 <4>[ 416.208636] RAX: 0000000000000000 RBX: ffff888250a44880 RCX: 0000000000000105 <4>[ 416.208639] RDX: 0000000000000105 RSI: ffffffff82320c5b RDI: 00000000ffffffff <4>[ 416.208641] RBP: ffff8882781bb870 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.208643] R10: 00000000054d2957 R11: 000000006abbd991 R12: ffff8881951d58c8 <4>[ 416.208646] R13: ffff888286073880 R14: ffff888286073848 R15: ffff8881951d5910 <4>[ 416.208669] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.208671] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.208673] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.208675] PKRU: 55555554 <4>[ 416.208677] Call Trace: <4>[ 416.208679] <IRQ> <4>[ 416.208751] i915_request_enable_breadcrumb+0x278/0x400 [i915] <4>[ 416.208839] __i915_request_submit+0xca/0x2a0 [i915] <4>[ 416.208892] __execlists_submission_tasklet+0x480/0x1830 [i915] <4>[ 416.208942] execlists_submission_tasklet+0xc4/0x130 [i915] <4>[ 416.208947] tasklet_action_common.isra.17+0x6c/0x1c0 <4>[ 416.208954] __do_softirq+0xdf/0x498 <4>[ 416.208960] ? handle_fasteoi_irq+0x150/0x150 <4>[ 416.208964] asm_call_on_stack+0xf/0x20 <4>[ 416.208966] </IRQ> <4>[ 416.208969] do_softirq_own_stack+0xa1/0xc0 <4>[ 416.208972] irq_exit_rcu+0xb5/0xc0 <4>[ 416.208976] common_interrupt+0xf7/0x260 <4>[ 416.208980] asm_common_interrupt+0x1e/0x40 <4>[ 416.208985] RIP: 0010:cpuidle_enter_state+0xb6/0x410 <4>[ 416.208987] Code: 00 31 ff e8 9c 3e 89 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 31 03 00 00 31 ff e8 e3 6c 90 ff e8 fe a4 94 ff fb 45 85 ed <0f> 88 c7 02 00 00 49 63 c5 4c 2b 24 24 48 8d 14 40 48 8d 14 90 48 <4>[ 416.208989] RSP: 0018:ffffc90000143e70 EFLAGS: 00000206 <4>[ 416.208991] RAX: 0000000000000007 RBX: ffffe8ffffda8070 RCX: 0000000000000000 <4>[ 416.208993] RDX: 0000000000000000 RSI: ffffffff8238b4ee RDI: ffffffff8233184f <4>[ 416.208995] RBP: ffffffff826b4e00 R08: 0000000000000000 R09: 0000000000000000 <4>[ 416.208997] R10: 0000000000000001 R11: 0000000000000000 R12: 00000060e7f24a8f <4>[ 416.208998] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000003 <4>[ 416.209012] cpuidle_enter+0x24/0x40 <4>[ 416.209016] do_idle+0x22f/0x2d0 <4>[ 416.209022] cpu_startup_entry+0x14/0x20 <4>[ 416.209025] start_secondary+0x158/0x1a0 <4>[ 416.209030] secondary_startup_64+0xa4/0xb0 <4>[ 416.209039] irq event stamp: 10186977 <4>[ 416.209042] hardirqs last enabled at (10186976): [<ffffffff810b9363>] tasklet_action_common.isra.17+0xe3/0x1c0 <4>[ 416.209044] hardirqs last disabled at (10186977): [<ffffffff81a5e5ed>] _raw_spin_lock_irqsave+0xd/0x50 <4>[ 416.209047] softirqs last enabled at (10186968): [<ffffffff810b9a1a>] irq_enter_rcu+0x6a/0x70 <4>[ 416.209049] softirqs last disabled at (10186969): [<ffffffff81c00f4f>] asm_call_on_stack+0xf/0x20 <4>[ 416.209317] list_del corruption, ffff8882781bb870->next is LIST_POISON1 (dead000000000100) <4>[ 416.209317] WARNING: CPU: 7 PID: 46 at lib/list_debug.c:47 __list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.209317] CPU: 7 PID: 46 Comm: ksoftirqd/7 Tainted: G U W 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.209317] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.209317] RIP: 0010:__list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Code: 2e 48 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 c3 48 89 fe 48 89 c2 48 c7 c7 38 19 33 82 e8 62 e0 b6 ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 19 33 82 e8 4e e0 b6 ff 0f 0b <4>[ 416.209317] RSP: 0018:ffffc90000280de8 EFLAGS: 00010086 <4>[ 416.209317] RAX: 0000000000000000 RBX: ffff8882781bb848 RCX: 0000000000010104 <4>[ 416.209317] RDX: 0000000000010104 RSI: ffffffff8238b4ee RDI: 00000000ffffffff <4>[ 416.209317] RBP: ffff8882781bb880 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.209317] R10: 000000009fb6666e R11: 00000000feca9427 R12: ffffc90000280e18 <4>[ 416.209317] R13: ffff8881951d5930 R14: dead0000000000d8 R15: ffff8882781bb880 <4>[ 416.209317] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.209317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.209317] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.209317] PKRU: 55555554 <4>[ 416.209317] Call Trace: <4>[ 416.209317] <IRQ> <4>[ 416.209317] remove_signaling_context.isra.13+0xd/0x70 [i915] <4>[ 416.209513] signal_irq_work+0x1f7/0x4b0 [i915] This is caused by virtual engines where although we take the breadcrumb lock on each of the active engines, they may be different engines on different requests, It turns out that the b->irq_lock was not a sufficient proxy for the engine->active.lock in the case of more than one request, so introduce an explicit lock around ce->signals. v2: ce->signal_lock is acquired with only RCU protection and so must be treated carefully and not cleared during reallocation. We also then need to confirm that the ce we lock is the same as we found in the breadcrumb list. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276 Fixes: c18636f7 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Fixes: 2854d866 ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs") Signed-off-by:
-
Chris Wilson authored
Allow a brief period for continued access to a dead intel_context by deferring the release of the struct until after an RCU grace period. As we are using a dedicated slab cache for the contexts, we can defer the release of the slab pages via RCU, with the caveat that individual structs may be reused from the freelist within an RCU grace period. To handle that, we have to avoid clearing members of the zombie struct. This is required for a later patch to handle locking around virtual requests in the signaler, as those requests may want to move between engines and be destroyed while we are holding b->irq_lock on a physical engine. v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we don't need to reset the debug code, at the loss of having the mutex debug code spot us attempting to destroy a locked mutex. v3: As the intended use will remain strongly referenced counted, with very little inflight access across reuse, drop the ctor. v4: Drop the unrequired change to remove the temporary reference around dropping the active context, and add back some more missing ctor operations. v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced later] maybe accessed under RCU and so needs special care not to be reinitialised. v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration. Signed-off-by:
-
Chris Wilson authored
Pull the repeated check for the last active request being completed to a single spot, when deciding whether or not execlist preemption is required. In doing so, we remove the tasklet kick, introduced with the completion checks in commit 35f3fd81 ("drm/i915/execlists: Workaround switching back to a completed context"), if we find the request was completed but have not yet seen the corresponding CS event. This was devolving into a busy spin of the tasklet while we waited for the event as the delivery was not as instantaneous as expected. Under load this is sufficient to exhaust the tasklet softirq timeslice, and force ksoftirqd. Quite noticeable overhead for no apparent improvement in latency. Signed-off-by:
-
Chris Wilson authored
Since the introduction of preempt-to-busy, requests can complete in the background, even while they are not on the engine->active.requests list. As such, the engine->active.request list itself is not in strict retirement order, and we have to scan the entire list while unwinding to not miss any. However, if the request is completed we currently leave it on the list [until retirement], but we could just as simply remove it and stop treating it as active. We would only have to then traverse it once while unwinding in quick succession. Signed-off-by:
-
Chris Wilson authored
Ville noticed that the last mocs entry is used unconditionally by the HW when it performs cache evictions, and noted that while the value is not meant to be writable by the driver, we should program it to a reasonable value nevertheless. As it turns out, we can change the value of mocs:63 and the value we were programming into it would cause hard hangs in conjunction with atomic operations. v2: Add details from bspec about how it is used by HW Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2707 Fixes: 3bbaba0c ("drm/i915: Added Programming of the MOCS") Signed-off-by:
-
- 24 Nov, 2020 1 commit
-
-
Tvrtko Ursulin authored
CT event handler is called under the gt->irq_lock from the interrupt handling paths so make it the same from the init path. I don't think this mismatch caused any functional issue but we need to wean the code of the global i915->irq_lock. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201120095636.1987395-2-tvrtko.ursulin@linux.intel.com
-
